Esp8266_deauther: Adding Haptic (Vibration) Feedback to OLED version...

Created on 27 Oct 2017 · 2Comments · Source: SpacehuhnTech/esp8266_deauther

I want to add vibration feedback to the ESP whenever a button is pressed just like in smartphones... I want to use the vibration motor used in mobile phones...

Vibrator Motor

The basic Circuit Idea is:-

circuit

My Deauther Board(DIY):-

img_20171027_192959
img_20171027_192827
img_20171027_192846
img_20171027_192853

Some Info:-

Board: NodeMCU Amica
Using OLED: YES
Using WebServer: YES
Using Serial: NO
Installation mode: Source
Code/binary version: 1.6
Flash size: 1M
Flash method: Arduino IDE
Flash Frequency: 40Mhz
Upload Speed: 115200
Powered by: Power Bank

discussion improvement stale

Source

shreyask21

👍1

Most helpful comment

Hello, i made something very similar to you and a like to add a haptic feed when a press ok. I should try. This. I used a rotatory encoder to move on menu fields.
20180213_072353

cicemon212 on 13 Feb 2018

👍3

All 2 comments

Hello, i made something very similar to you and a like to add a haptic feed when a press ok. I should try. This. I used a rotatory encoder to move on menu fields.
20180213_072353

cicemon212 on 13 Feb 2018

👍3

This issue has been automatically marked as stale because it has not had recent activity. It will be closed if no further activity occurs. Thank you for your contributions.