Esp8266_deauther: Not work anymore

[ghost]

Hardware/Flashing:

Board: ESP8266 dev module
Using OLED: NO
Using WebServer: probably not
Using Serial: Probably not
Installation mode: binary
Code/binary version: Probably 1.5
Flash size: Probably 1M
Flash method: esptool
Flash Frequency: 40Mhz
Upload Speed: 115200
Powered by: Battery

Description:

Hi, I'm again here.
I found a problem:
When I flash my esp it work, but when I go to the settings and change the Mac to 00:00:00:00:00:00
I can't connect to my esp and if I try to reboot/reflash it I can't find it.
I gave 5€ to the Chineses :'-(
Can anyone help me?

[mansourxz]

Get you board and power it on... then hold the rst button for atleast 5-10 seconds. This will reset the module and erase everything off of it. Then reflash the deauther and everything should be back to normal.. hopefully I helped. 😁

[ghost]

Still not work :-(

[spacehuhn]

Maybe the mac address you gave is invalid.
My tip: don't play around with settings if you don't know how to fix it when it breaks.

Reflash your device or see FAQ on how to reset: https://github.com/spacehuhn/esp8266_deauther/wiki/FAQ

For reference:

[ghost]

Thanks again, it work!