Cura: [3.5.0] "UNABLE TO SLICE" in one-at-a-time mode

[Inspironator]

Platform HP Desktop running Win10 - 64 bit OS

Printer Not Connected, I use a micro-USB, but it is a Creality CR-10

Steps to Reproduce Install Cura 3.5.0 and enabled it to read all available file types during installation; open the base.stl file on the desktop from within Cura's File commands.

Actual Results: The object drops onto the build plate, then in a flash, Cura displays "unable to slice" and shows 0 for print time and cost spec info.

Expected results: Expected it to display "ready to slice" along with print time, cost spec info.

Additional Information: I have run 3.4.1 and 3.5.0 side by side simultaneously, and after uninstalling 3.4.1 and the results are the same with 3.5.0. I searched for the local/cura log file and can find that file. I did find a log file in the appdata-roaming- cura, whose contents are:

2018-10-11 11:53:15,205 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [421]: Loaded plugin FileLogger
2018-10-11 11:53:15,283 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [421]: Loaded plugin FirmwareUpdateChecker
2018-10-11 11:53:15,312 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [421]: Loaded plugin GCodeGzReader
2018-10-11 11:53:15,334 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [421]: Loaded plugin GCodeGzWriter
2018-10-11 11:53:15,351 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [421]: Loaded plugin GCodeProfileReader
2018-10-11 11:53:15,391 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [421]: Loaded plugin GCodeReader
2018-10-11 11:53:15,538 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [421]: Loaded plugin GCodeWriter
2018-10-11 11:53:15,578 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [421]: Loaded plugin ImageReader
2018-10-11 11:53:15,597 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [421]: Loaded plugin LegacyProfileReader
2018-10-11 11:53:15,621 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [421]: Loaded plugin LocalContainerProvider
2018-10-11 11:53:15,644 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [421]: Loaded plugin LocalFileOutputDevice
2018-10-11 11:53:15,666 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [421]: Loaded plugin MachineSettingsAction
2018-10-11 11:53:15,686 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [421]: Loaded plugin ModelChecker
2018-10-11 11:53:15,707 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [421]: Loaded plugin MonitorStage
2018-10-11 11:53:15,729 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [421]: Loaded plugin PerObjectSettingsTool
2018-10-11 11:53:15,750 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [421]: Loaded plugin PostProcessingPlugin
2018-10-11 11:53:15,769 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [421]: Loaded plugin PrepareStage
2018-10-11 11:53:15,794 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [421]: Loaded plugin RemovableDriveOutputDevice
2018-10-11 11:53:15,826 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [421]: Loaded plugin SimulationView
2018-10-11 11:53:15,851 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [421]: Loaded plugin SliceInfoPlugin
2018-10-11 11:53:15,874 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [421]: Loaded plugin SolidView
2018-10-11 11:53:15,897 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [421]: Loaded plugin SupportEraser
2018-10-11 11:53:15,937 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [421]: Loaded plugin Toolbox
2018-10-11 11:53:15,966 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [421]: Loaded plugin CameraTool
2018-10-11 11:53:15,994 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [421]: Loaded plugin MirrorTool
2018-10-11 11:53:16,022 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [421]: Loaded plugin RotateTool
2018-10-11 11:53:16,051 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [421]: Loaded plugin ScaleTool
2018-10-11 11:53:16,078 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [421]: Loaded plugin SelectionTool
2018-10-11 11:53:16,105 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [421]: Loaded plugin TranslateTool
2018-10-11 11:53:16,145 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [421]: Loaded plugin UFPWriter
2018-10-11 11:53:16,177 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [421]: Loaded plugin UltimakerMachineActions
2018-10-11 11:53:16,295 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [421]: Loaded plugin UM3NetworkPrinting
2018-10-11 11:53:16,327 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [421]: Loaded plugin UpdateChecker
2018-10-11 11:53:16,332 - INFO - [Thread-1] UpdateChecker.UpdateCheckerJob.run [34]: Checking for new version of cura
2018-10-11 11:53:16,423 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [421]: Loaded plugin USBPrinting
2018-10-11 11:53:16,447 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [421]: Loaded plugin UserAgreement
2018-10-11 11:53:16,483 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [421]: Loaded plugin VersionUpgrade21to22
2018-10-11 11:53:16,510 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [421]: Loaded plugin VersionUpgrade22to24
2018-10-11 11:53:16,533 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [421]: Loaded plugin VersionUpgrade25to26
2018-10-11 11:53:16,556 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [421]: Loaded plugin VersionUpgrade26to27
2018-10-11 11:53:16,576 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [421]: Loaded plugin VersionUpgrade27to30
2018-10-11 11:53:16,599 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [421]: Loaded plugin VersionUpgrade30to31
2018-10-11 11:53:16,632 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [421]: Loaded plugin VersionUpgrade32to33
2018-10-11 11:53:16,662 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [421]: Loaded plugin VersionUpgrade33to34
2018-10-11 11:53:16,690 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [421]: Loaded plugin VersionUpgrade34to35
2018-10-11 11:53:16,718 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [421]: Loaded plugin SimpleView
2018-10-11 11:53:16,756 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [421]: Loaded plugin X3DReader
2018-10-11 11:53:16,797 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [421]: Loaded plugin XmlMaterialProfile
2018-10-11 11:53:16,822 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [421]: Loaded plugin XRayView
2018-10-11 11:53:16,846 - WARNING - [MainThread] UM.PluginRegistry.loadPlugin [401]: Plugin BarbarianPlugin uses an incompatible API version, ignoring
2018-10-11 11:53:16,875 - WARNING - [MainThread] UM.PluginRegistry.loadPlugin [401]: Plugin OrientationPlugin uses an incompatible API version, ignoring
2018-10-11 11:53:16,897 - INFO - [MainThread] UM.VersionUpgradeManager.upgrade [128]: Looking for old configuration files to upgrade.
2018-10-11 11:53:16,901 - DEBUG - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [278]: Config file [.Creality+CR-10+%232.global.cfg] is of version [4000004], which is different from the defined version [2000000], no upgrade task for it from type [definition_changes].
2018-10-11 11:53:16,906 - DEBUG - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [278]: Config file [.Creality+CR-10+%232_settings.inst.cfg] is of version [4000004], which is different from the defined version [2000001], no upgrade task for it from type [definition_changes].
2018-10-11 11:53:16,911 - DEBUG - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [278]: Config file [.Creality+CR-10+fdmextruder_settings.inst.cfg] is of version [4000004], which is different from the defined version [2000001], no upgrade task for it from type [definition_changes].
2018-10-11 11:53:16,915 - DEBUG - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [278]: Config file [.Creality+CR-10+%232_settings.inst.cfg] is of version [4000004], which is different from the defined version [2000002], no upgrade task for it from type [definition_changes].
2018-10-11 11:53:16,920 - DEBUG - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [278]: Config file [.Creality+CR-10+fdmextruder_settings.inst.cfg] is of version [4000004], which is different from the defined version [2000002], no upgrade task for it from type [definition_changes].
2018-10-11 11:53:16,925 - DEBUG - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [278]: Config file [.Creality+CR-10+%232_settings.inst.cfg] is of version [4000004], which is different from the defined version [2000003], no upgrade task for it from type [definition_changes].
2018-10-11 11:53:16,930 - DEBUG - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [278]: Config file [.Creality+CR-10+fdmextruder_settings.inst.cfg] is of version [4000004], which is different from the defined version [2000003], no upgrade task for it from type [definition_changes].
2018-10-11 11:53:16,935 - DEBUG - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [278]: Config file [.Creality+CR-10+%232_settings.inst.cfg] is of version [4000004], which is different from the defined version [2000004], no upgrade task for it from type [definition_changes].
2018-10-11 11:53:16,939 - DEBUG - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [278]: Config file [.Creality+CR-10+fdmextruder_settings.inst.cfg] is of version [4000004], which is different from the defined version [2000004], no upgrade task for it from type [definition_changes].
2018-10-11 11:53:16,944 - DEBUG - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [278]: Config file [.Creality+CR-10+%232_settings.inst.cfg] is of version [4000004], which is different from the defined version [3000004], no upgrade task for it from type [definition_changes].
2018-10-11 11:53:16,948 - DEBUG - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [278]: Config file [.Creality+CR-10+fdmextruder_settings.inst.cfg] is of version [4000004], which is different from the defined version [3000004], no upgrade task for it from type [definition_changes].
2018-10-11 11:53:16,953 - INFO - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [285]: Create upgrade task for configuration file [.Creality+CR-10+%232_settings.inst.cfg] with type [definition_changes] and source version [4000004]
2018-10-11 11:53:16,957 - INFO - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [285]: Create upgrade task for configuration file [.Creality+CR-10+fdmextruder_settings.inst.cfg] with type [definition_changes] and source version [4000004]
2018-10-11 11:53:16,962 - DEBUG - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [278]: Config file [.Creality+CR-10+fdmextruder.extruder.cfg] is of version [4000004], which is different from the defined version [2000000], no upgrade task for it from type [extruder_train].
2018-10-11 11:53:16,966 - DEBUG - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [278]: Config file [.Creality+CR-10+fdmextruder.extruder.cfg] is of version [4000004], which is different from the defined version [3000000], no upgrade task for it from type [extruder_train].
2018-10-11 11:53:16,971 - DEBUG - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [278]: Config file [.Creality+CR-10+fdmextruder.extruder.cfg] is of version [4000004], which is different from the defined version [3000002], no upgrade task for it from type [extruder_train].
2018-10-11 11:53:16,975 - DEBUG - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [278]: Config file [.Creality+CR-10+fdmextruder.extruder.cfg] is of version [4000004], which is different from the defined version [3000003], no upgrade task for it from type [extruder_train].
2018-10-11 11:53:16,979 - DEBUG - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [278]: Config file [.Creality+CR-10+fdmextruder.extruder.cfg] is of version [4000004], which is different from the defined version [3000004], no upgrade task for it from type [extruder_train].
2018-10-11 11:53:16,983 - INFO - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [285]: Create upgrade task for configuration file [.Creality+CR-10+fdmextruder.extruder.cfg] with type [extruder_train] and source version [4000004]
2018-10-11 11:53:16,987 - DEBUG - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [278]: Config file [.Creality+CR-10+%232.global.cfg] is of version [4000004], which is different from the defined version [1000000], no upgrade task for it from type [machine_instance].
2018-10-11 11:53:16,990 - DEBUG - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [278]: Config file [.Creality+CR-10+%232.global.cfg] is of version [4000004], which is different from the defined version [3000000], no upgrade task for it from type [machine_stack].
2018-10-11 11:53:16,993 - DEBUG - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [278]: Config file [.Creality+CR-10+%232.global.cfg] is of version [4000004], which is different from the defined version [3000001], no upgrade task for it from type [machine_stack].
2018-10-11 11:53:16,996 - DEBUG - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [278]: Config file [.Creality+CR-10+%232.global.cfg] is of version [4000004], which is different from the defined version [3000002], no upgrade task for it from type [machine_stack].
2018-10-11 11:53:16,999 - DEBUG - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [278]: Config file [.Creality+CR-10+%232.global.cfg] is of version [4000004], which is different from the defined version [3000003], no upgrade task for it from type [machine_stack].
2018-10-11 11:53:17,002 - DEBUG - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [278]: Config file [.Creality+CR-10+%232.global.cfg] is of version [4000004], which is different from the defined version [3000004], no upgrade task for it from type [machine_stack].
2018-10-11 11:53:17,006 - INFO - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [285]: Create upgrade task for configuration file [.Creality+CR-10+%232.global.cfg] with type [machine_stack] and source version [4000004]
2018-10-11 11:53:17,010 - DEBUG - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [278]: Config file [.cura.cfg] is of version [6000004], which is different from the defined version [2000000], no upgrade task for it from type [preferences].
2018-10-11 11:53:17,013 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [281]: Failed to get file version: .packages.json, skip it
2018-10-11 11:53:17,015 - DEBUG - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [278]: Config file [.cura.cfg] is of version [6000004], which is different from the defined version [4000000], no upgrade task for it from type [preferences].
2018-10-11 11:53:17,018 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [281]: Failed to get file version: .packages.json, skip it
2018-10-11 11:53:17,022 - DEBUG - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [278]: Config file [.cura.cfg] is of version [6000004], which is different from the defined version [4000001], no upgrade task for it from type [preferences].
2018-10-11 11:53:17,026 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [281]: Failed to get file version: .packages.json, skip it
2018-10-11 11:53:17,031 - DEBUG - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [278]: Config file [.cura.cfg] is of version [6000004], which is different from the defined version [4000002], no upgrade task for it from type [preferences].
2018-10-11 11:53:17,036 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [281]: Failed to get file version: .packages.json, skip it
2018-10-11 11:53:17,041 - DEBUG - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [278]: Config file [.cura.cfg] is of version [6000004], which is different from the defined version [5000003], no upgrade task for it from type [preferences].
2018-10-11 11:53:17,046 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [281]: Failed to get file version: .packages.json, skip it
2018-10-11 11:53:17,051 - DEBUG - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [278]: Config file [.cura.cfg] is of version [6000004], which is different from the defined version [5000004], no upgrade task for it from type [preferences].
2018-10-11 11:53:17,055 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [281]: Failed to get file version: .packages.json, skip it
2018-10-11 11:53:17,060 - INFO - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [285]: Create upgrade task for configuration file [.cura.cfg] with type [preferences] and source version [6000004]
2018-10-11 11:53:17,063 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [281]: Failed to get file version: .packages.json, skip it
2018-10-11 11:53:17,070 - DEBUG - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [278]: Config file [.creality_cr10_draft+quality+w+higher+first+layer+extru.inst.cfg] is of version [2000004], which is different from the defined version [2000000], no upgrade task for it from type [quality_changes].
2018-10-11 11:53:17,074 - DEBUG - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [278]: Config file [.creality_cr10_low+quality+%232.inst.cfg] is of version [2000004], which is different from the defined version [2000000], no upgrade task for it from type [quality_changes].
2018-10-11 11:53:17,078 - DEBUG - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [278]: Config file [.fdmextruder_draft+quality+w+higher+first+layer+extru.inst.cfg] is of version [2000004], which is different from the defined version [2000000], no upgrade task for it from type [quality_changes].
2018-10-11 11:53:17,082 - DEBUG - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [278]: Config file [.fdmextruder_low+quality+%232.inst.cfg] is of version [2000004], which is different from the defined version [2000000], no upgrade task for it from type [quality_changes].
2018-10-11 11:53:17,087 - DEBUG - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [278]: Config file [.creality_cr10_draft+quality+w+higher+first+layer+extru.inst.cfg] is of version [2000004], which is different from the defined version [2000001], no upgrade task for it from type [quality_changes].
2018-10-11 11:53:17,090 - DEBUG - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [278]: Config file [.creality_cr10_low+quality+%232.inst.cfg] is of version [2000004], which is different from the defined version [2000001], no upgrade task for it from type [quality_changes].
2018-10-11 11:53:17,093 - DEBUG - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [278]: Config file [.fdmextruder_draft+quality+w+higher+first+layer+extru.inst.cfg] is of version [2000004], which is different from the defined version [2000001], no upgrade task for it from type [quality_changes].
2018-10-11 11:53:17,097 - DEBUG - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [278]: Config file [.fdmextruder_low+quality+%232.inst.cfg] is of version [2000004], which is different from the defined version [2000001], no upgrade task for it from type [quality_changes].
2018-10-11 11:53:17,101 - DEBUG - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [278]: Config file [.creality_cr10_draft+quality+w+higher+first+layer+extru.inst.cfg] is of version [2000004], which is different from the defined version [2000002], no upgrade task for it from type [quality_changes].
2018-10-11 11:53:17,104 - DEBUG - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [278]: Config file [.creality_cr10_low+quality+%232.inst.cfg] is of version [2000004], which is different from the defined version [2000002], no upgrade task for it from type [quality_changes].
2018-10-11 11:53:17,108 - DEBUG - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [278]: Config file [.fdmextruder_draft+quality+w+higher+first+layer+extru.inst.cfg] is of version [2000004], which is different from the defined version [2000002], no upgrade task for it from type [quality_changes].
2018-10-11 11:53:17,111 - DEBUG - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [278]: Config file [.fdmextruder_low+quality+%232.inst.cfg] is of version [2000004], which is different from the defined version [2000002], no upgrade task for it from type [quality_changes].
2018-10-11 11:53:17,115 - DEBUG - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [278]: Config file [.creality_cr10_draft+quality+w+higher+first+layer+extru.inst.cfg] is of version [2000004], which is different from the defined version [2000003], no upgrade task for it from type [quality_changes].
2018-10-11 11:53:17,118 - DEBUG - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [278]: Config file [.creality_cr10_low+quality+%232.inst.cfg] is of version [2000004], which is different from the defined version [2000003], no upgrade task for it from type [quality_changes].
2018-10-11 11:53:17,122 - DEBUG - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [278]: Config file [.fdmextruder_draft+quality+w+higher+first+layer+extru.inst.cfg] is of version [2000004], which is different from the defined version [2000003], no upgrade task for it from type [quality_changes].
2018-10-11 11:53:17,125 - DEBUG - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [278]: Config file [.fdmextruder_low+quality+%232.inst.cfg] is of version [2000004], which is different from the defined version [2000003], no upgrade task for it from type [quality_changes].
2018-10-11 11:53:17,128 - INFO - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [285]: Create upgrade task for configuration file [.creality_cr10_draft+quality+w+higher+first+layer+extru.inst.cfg] with type [quality_changes] and source version [2000004]
2018-10-11 11:53:17,131 - INFO - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [285]: Create upgrade task for configuration file [.creality_cr10_low+quality+%232.inst.cfg] with type [quality_changes] and source version [2000004]
2018-10-11 11:53:17,134 - INFO - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [285]: Create upgrade task for configuration file [.fdmextruder_draft+quality+w+higher+first+layer+extru.inst.cfg] with type [quality_changes] and source version [2000004]
2018-10-11 11:53:17,138 - INFO - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [285]: Create upgrade task for configuration file [.fdmextruder_low+quality+%232.inst.cfg] with type [quality_changes] and source version [2000004]
2018-10-11 11:53:17,142 - DEBUG - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [278]: Config file [.creality_cr10_draft+quality+w+higher+first+layer+extru.inst.cfg] is of version [4000004], which is different from the defined version [3000004], no upgrade task for it from type [quality_changes].
2018-10-11 11:53:17,146 - DEBUG - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [278]: Config file [.creality_cr10_low+quality+%232.inst.cfg] is of version [4000004], which is different from the defined version [3000004], no upgrade task for it from type [quality_changes].
2018-10-11 11:53:17,150 - DEBUG - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [278]: Config file [.fdmextruder_draft+quality+w+higher+first+layer+extru.inst.cfg] is of version [4000004], which is different from the defined version [3000004], no upgrade task for it from type [quality_changes].
2018-10-11 11:53:17,154 - DEBUG - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [278]: Config file [.fdmextruder_low+quality+%232.inst.cfg] is of version [4000004], which is different from the defined version [3000004], no upgrade task for it from type [quality_changes].
2018-10-11 11:53:17,158 - INFO - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [285]: Create upgrade task for configuration file [.creality_cr10_draft+quality+w+higher+first+layer+extru.inst.cfg] with type [quality_changes] and source version [4000004]
2018-10-11 11:53:17,162 - INFO - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [285]: Create upgrade task for configuration file [.creality_cr10_low+quality+%232.inst.cfg] with type [quality_changes] and source version [4000004]
2018-10-11 11:53:17,167 - INFO - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [285]: Create upgrade task for configuration file [.fdmextruder_draft+quality+w+higher+first+layer+extru.inst.cfg] with type [quality_changes] and source version [4000004]
2018-10-11 11:53:17,171 - INFO - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [285]: Create upgrade task for configuration file [.fdmextruder_low+quality+%232.inst.cfg] with type [quality_changes] and source version [4000004]
2018-10-11 11:53:17,177 - DEBUG - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [278]: Config file [.Creality+CR-10+%232_user.inst.cfg] is of version [4000004], which is different from the defined version [2000000], no upgrade task for it from type [user].
2018-10-11 11:53:17,181 - DEBUG - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [278]: Config file [.Creality+CR-10+fdmextruder_user.inst.cfg] is of version [4000004], which is different from the defined version [2000000], no upgrade task for it from type [user].
2018-10-11 11:53:17,185 - DEBUG - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [278]: Config file [.Creality+CR-10+%232_user.inst.cfg] is of version [4000004], which is different from the defined version [2000001], no upgrade task for it from type [user].
2018-10-11 11:53:17,190 - DEBUG - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [278]: Config file [.Creality+CR-10+fdmextruder_user.inst.cfg] is of version [4000004], which is different from the defined version [2000001], no upgrade task for it from type [user].
2018-10-11 11:53:17,195 - DEBUG - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [278]: Config file [.Creality+CR-10+%232_user.inst.cfg] is of version [4000004], which is different from the defined version [2000002], no upgrade task for it from type [user].
2018-10-11 11:53:17,199 - DEBUG - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [278]: Config file [.Creality+CR-10+fdmextruder_user.inst.cfg] is of version [4000004], which is different from the defined version [2000002], no upgrade task for it from type [user].
2018-10-11 11:53:17,203 - DEBUG - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [278]: Config file [.Creality+CR-10+%232_user.inst.cfg] is of version [4000004], which is different from the defined version [2000003], no upgrade task for it from type [user].
2018-10-11 11:53:17,208 - DEBUG - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [278]: Config file [.Creality+CR-10+fdmextruder_user.inst.cfg] is of version [4000004], which is different from the defined version [2000003], no upgrade task for it from type [user].
2018-10-11 11:53:17,212 - DEBUG - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [278]: Config file [.Creality+CR-10+%232_user.inst.cfg] is of version [4000004], which is different from the defined version [2000004], no upgrade task for it from type [user].
2018-10-11 11:53:17,215 - DEBUG - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [278]: Config file [.Creality+CR-10+fdmextruder_user.inst.cfg] is of version [4000004], which is different from the defined version [2000004], no upgrade task for it from type [user].
2018-10-11 11:53:17,219 - DEBUG - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [278]: Config file [.Creality+CR-10+%232_user.inst.cfg] is of version [4000004], which is different from the defined version [3000004], no upgrade task for it from type [user].
2018-10-11 11:53:17,223 - DEBUG - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [278]: Config file [.Creality+CR-10+fdmextruder_user.inst.cfg] is of version [4000004], which is different from the defined version [3000004], no upgrade task for it from type [user].
2018-10-11 11:53:17,227 - INFO - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [285]: Create upgrade task for configuration file [.Creality+CR-10+%232_user.inst.cfg] with type [user] and source version [4000004]
2018-10-11 11:53:17,231 - INFO - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [285]: Create upgrade task for configuration file [.Creality+CR-10+fdmextruder_user.inst.cfg] with type [user] and source version [4000004]
2018-10-11 11:53:17,236 - INFO - [MainThread] UM.VersionUpgradeManager._upgradeFile [369]: Upgraded .Creality+CR-10+%232_settings.inst.cfg to version 4000005.
2018-10-11 11:53:17,245 - INFO - [MainThread] UM.VersionUpgradeManager._upgradeFile [369]: Upgraded .Creality+CR-10+fdmextruder_settings.inst.cfg to version 4000005.
2018-10-11 11:53:17,250 - INFO - [MainThread] UM.VersionUpgradeManager._upgradeFile [369]: Upgraded .Creality+CR-10+fdmextruder.extruder.cfg to version 4000005.
2018-10-11 11:53:17,254 - INFO - [MainThread] UM.VersionUpgradeManager._upgradeFile [369]: Upgraded .Creality+CR-10+%232.global.cfg to version 4000005.
2018-10-11 11:53:17,257 - INFO - [MainThread] UM.VersionUpgradeManager._upgradeFile [369]: Upgraded .cura.cfg to version 6000005.
2018-10-11 11:53:17,260 - INFO - [MainThread] UM.VersionUpgradeManager._upgradeFile [369]: Upgraded .creality_cr10_draft+quality+w+higher+first+layer+extru.inst.cfg to version 4000005.
2018-10-11 11:53:17,265 - INFO - [MainThread] UM.VersionUpgradeManager._upgradeFile [369]: Upgraded .creality_cr10_low+quality+%232.inst.cfg to version 4000005.
2018-10-11 11:53:17,269 - INFO - [MainThread] UM.VersionUpgradeManager._upgradeFile [369]: Upgraded .fdmextruder_draft+quality+w+higher+first+layer+extru.inst.cfg to version 4000005.
2018-10-11 11:53:17,272 - INFO - [MainThread] UM.VersionUpgradeManager._upgradeFile [369]: Upgraded .fdmextruder_low+quality+%232.inst.cfg to version 4000005.
2018-10-11 11:53:17,280 - INFO - [MainThread] UM.VersionUpgradeManager._upgradeFile [369]: Upgraded .Creality+CR-10+%232_user.inst.cfg to version 4000005.
2018-10-11 11:53:17,285 - INFO - [MainThread] UM.VersionUpgradeManager._upgradeFile [369]: Upgraded .Creality+CR-10+fdmextruder_user.inst.cfg to version 4000005.
2018-10-11 11:53:17,296 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [178]: Socket state changed to Listening
2018-10-11 11:53:17,506 - INFO - [MainThread] UM.Backend.Backend.startEngine [74]: Started engine process: C:Program FilesUltimaker Cura 3.5CuraEngine.exe
2018-10-11 11:53:17,510 - DEBUG - [MainThread] UM.Backend.Backend._backendLog [94]: [Backend] Calling engine with: ['C:\Program Files\Ultimaker Cura 3.5\CuraEngine.exe', 'connect', '127.0.0.1:49674', '-j', 'C:\Program Files\Ultimaker Cura 3.5\resources\definitions\fdmprinter.def.json', '']
2018-10-11 11:53:18,002 - DEBUG - [Thread-14] UM.Backend.Backend._backendLog [94]: [Backend]
2018-10-11 11:53:18,005 - DEBUG - [Thread-14] UM.Backend.Backend._backendLog [94]: [Backend] Cura_SteamEngine version 3.5.0
2018-10-11 11:53:18,010 - DEBUG - [Thread-14] UM.Backend.Backend._backendLog [94]: [Backend] Copyright (C) 2018 Ultimaker
2018-10-11 11:53:18,013 - DEBUG - [Thread-14] UM.Backend.Backend._backendLog [94]: [Backend]
2018-10-11 11:53:18,034 - DEBUG - [Thread-14] UM.Backend.Backend._backendLog [94]: [Backend] This program is free software: you can redistribute it and/or modify
2018-10-11 11:53:18,037 - DEBUG - [Thread-14] UM.Backend.Backend._backendLog [94]: [Backend] it under the terms of the GNU Affero General Public License as published by
2018-10-11 11:53:18,043 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [182]: Socket state changed to Connected
2018-10-11 11:53:18,043 - DEBUG - [Thread-14] UM.Backend.Backend._backendLog [94]: [Backend] the Free Software Foundation, either version 3 of the License, or
2018-10-11 11:53:18,046 - DEBUG - [MainThread] UM.Backend.Backend._onSocketStateChanged [172]: Backend connected on port 49674
2018-10-11 11:53:18,048 - DEBUG - [Thread-14] UM.Backend.Backend._backendLog [94]: [Backend] (at your option) any later version.
2018-10-11 11:53:18,050 - DEBUG - [Thread-14] UM.Backend.Backend._backendLog [94]: [Backend]
2018-10-11 11:53:18,053 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [228]: Starting to slice...
2018-10-11 11:53:18,053 - DEBUG - [Thread-14] UM.Backend.Backend._backendLog [94]: [Backend] This program is distributed in the hope that it will be useful,
2018-10-11 11:53:18,056 - DEBUG - [Thread-14] UM.Backend.Backend._backendLog [94]: [Backend] but WITHOUT ANY WARRANTY; without even the implied warranty of
2018-10-11 11:53:18,056 - WARNING - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [232]: Slice unnecessary, nothing has changed that needs reslicing.
2018-10-11 11:53:18,059 - DEBUG - [Thread-14] UM.Backend.Backend._backendLog [94]: [Backend] MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
2018-10-11 11:53:18,063 - DEBUG - [Thread-14] UM.Backend.Backend._backendLog [94]: [Backend] GNU Affero General Public License for more details.
2018-10-11 11:53:18,069 - DEBUG - [Thread-14] UM.Backend.Backend._backendLog [94]: [Backend]
2018-10-11 11:53:18,076 - DEBUG - [Thread-14] UM.Backend.Backend._backendLog [94]: [Backend] You should have received a copy of the GNU Affero General Public License
2018-10-11 11:53:18,080 - DEBUG - [Thread-14] UM.Backend.Backend._backendLog [94]: [Backend] along with this program. If not, see http://www.gnu.org/licenses/.
2018-10-11 11:53:20,660 - DEBUG - [MainThread] cura.Scene.CuraSceneController.setActiveBuildPlate [103]: Select build plate: 0
2018-10-11 11:53:20,664 - INFO - [MainThread] cura.CuraApplication.run [660]: Initializing variant manager
2018-10-11 11:53:20,670 - DEBUG - [MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [54]: Loading container ultimaker_s5_glass
2018-10-11 11:53:20,677 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [374]: Container [ultimaker_s5_glass] added.
2018-10-11 11:53:20,678 - DEBUG - [MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [54]: Loading container ultimaker_s5
2018-10-11 11:53:21,116 - WARNING - [MainThread] LocalContainerProvider.LocalContainerProvider._saveCachedDefinition [262]: The definition cache for definition ultimaker_s5 failed to pickle.
2018-10-11 11:53:21,120 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [374]: Container [ultimaker_s5] added.
2018-10-11 11:53:21,123 - DEBUG - [MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [54]: Loading container ultimaker_s5_aluminum
2018-10-11 11:53:21,126 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [374]: Container [ultimaker_s5_aluminum] added.
2018-10-11 11:53:21,130 - DEBUG - [MainThread] cura.Machines.VariantManager.initialize [59]: Exclude variant [empty_variant]
2018-10-11 11:53:21,133 - INFO - [MainThread] cura.CuraApplication.run [664]: Initializing material manager
2018-10-11 11:53:21,264 - INFO - [MainThread] cura.CuraApplication.run [669]: Initializing quality manager
2018-10-11 11:53:21,297 - DEBUG - [MainThread] cura.Machines.QualityManager.initialize [133]: Lookup tables updated.
2018-10-11 11:53:21,299 - INFO - [MainThread] cura.CuraApplication.run [674]: Initializing machine manager
2018-10-11 11:53:21,302 - INFO - [MainThread] cura.CuraApplication.run [677]: Initializing container manager
2018-10-11 11:53:21,304 - INFO - [MainThread] cura.CuraApplication.run [680]: Initializing machine error checker
2018-10-11 11:53:21,327 - DEBUG - [MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [54]: Loading container Creality CR-10 #2
2018-10-11 11:53:21,330 - DEBUG - [MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [54]: Loading container Creality CR-10 #2_user
2018-10-11 11:53:21,336 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [374]: Container [Creality CR-10 #2_user] added.
2018-10-11 11:53:21,336 - DEBUG - [MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [54]: Loading container creality_cr10_draft quality w higher first layer extru
2018-10-11 11:53:21,342 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [374]: Container [creality_cr10_draft quality w higher first layer extru] added.
2018-10-11 11:53:21,342 - DEBUG - [MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [54]: Loading container draft
2018-10-11 11:53:21,348 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [374]: Container [draft] added.
2018-10-11 11:53:21,348 - DEBUG - [MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [54]: Loading container Creality CR-10 #2_settings
2018-10-11 11:53:21,353 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [374]: Container [Creality CR-10 #2_settings] added.
2018-10-11 11:53:21,353 - DEBUG - [MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [54]: Loading container creality_cr10
2018-10-11 11:53:21,644 - WARNING - [MainThread] LocalContainerProvider.LocalContainerProvider._saveCachedDefinition [262]: The definition cache for definition creality_cr10 failed to pickle.
2018-10-11 11:53:21,648 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [374]: Container [creality_cr10] added.
2018-10-11 11:53:21,653 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [374]: Container [Creality CR-10 #2] added.
2018-10-11 11:53:21,656 - DEBUG - [MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [54]: Loading container Creality CR-10 fdmextruder
2018-10-11 11:53:21,660 - DEBUG - [MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [54]: Loading container Creality CR-10 fdmextruder_user
2018-10-11 11:53:21,665 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [374]: Container [Creality CR-10 fdmextruder_user] added.
2018-10-11 11:53:21,666 - DEBUG - [MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [54]: Loading container fdmextruder_draft quality w higher first layer extru
2018-10-11 11:53:21,681 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [374]: Container [fdmextruder_draft quality w higher first layer extru] added.
2018-10-11 11:53:21,682 - DEBUG - [MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [54]: Loading container generic_pla_175
2018-10-11 11:53:21,690 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [374]: Container [generic_pla_175_imade3d_jellybox] added.
2018-10-11 11:53:21,693 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [374]: Container [generic_pla_175_imade3d_jellybox_0.4_mm] added.
2018-10-11 11:53:21,696 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [374]: Container [generic_pla_175_imade3d_jellybox_0.4_mm_2-fans] added.
2018-10-11 11:53:21,698 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [374]: Container [generic_pla_175_cartesio] added.
2018-10-11 11:53:21,702 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [374]: Container [generic_pla_175_cartesio_0.25mm_thermoplastic_extruder] added.
2018-10-11 11:53:21,706 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [374]: Container [generic_pla_175_cartesio_0.4mm_thermoplastic_extruder] added.
2018-10-11 11:53:21,709 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [374]: Container [generic_pla_175_cartesio_0.8mm_thermoplastic_extruder] added.
2018-10-11 11:53:21,718 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [374]: Container [generic_pla_175] added.
2018-10-11 11:53:21,719 - DEBUG - [MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [54]: Loading container Creality CR-10 fdmextruder_settings
2018-10-11 11:53:21,725 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [374]: Container [Creality CR-10 fdmextruder_settings] added.
2018-10-11 11:53:21,726 - DEBUG - [MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [54]: Loading container fdmextruder
2018-10-11 11:53:21,735 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [374]: Container [fdmextruder] added.
2018-10-11 11:53:21,739 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [374]: Container [Creality CR-10 fdmextruder] added.
2018-10-11 11:53:21,742 - ERROR - [MainThread] cura.Settings.ExtruderManager._fixSingleExtrusionMachineExtruderDefinition [382]: Single extruder printer [Creality CR-10 #2] expected extruder [creality_cr10_extruder_0], but got [fdmextruder]. I'm making it [creality_cr10_extruder_0].
2018-10-11 11:53:21,743 - DEBUG - [MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [54]: Loading container creality_cr10_extruder_0
2018-10-11 11:53:21,758 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [374]: Container [creality_cr10_extruder_0] added.
2018-10-11 11:53:21,781 - DEBUG - [MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [54]: Loading container fdmprinter
2018-10-11 11:53:22,136 - WARNING - [MainThread] LocalContainerProvider.LocalContainerProvider._saveCachedDefinition [262]: The definition cache for definition fdmprinter failed to pickle.
2018-10-11 11:53:22,140 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [374]: Container [fdmprinter] added.
2018-10-11 11:53:22,376 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [374]: Container [BQ_PauseAtHeight] added.
2018-10-11 11:53:22,379 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [374]: Container [2407337174632] added.
2018-10-11 11:53:22,379 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [156]: Begin loading of script: BQ_PauseAtHeight
2018-10-11 11:53:22,394 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [374]: Container [ChangeAtZ] added.
2018-10-11 11:53:22,397 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [374]: Container [2407337176088] added.
2018-10-11 11:53:22,397 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [156]: Begin loading of script: ChangeAtZ
2018-10-11 11:53:22,403 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [374]: Container [ExampleScript] added.
2018-10-11 11:53:22,406 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [374]: Container [2407337194608] added.
2018-10-11 11:53:22,407 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [156]: Begin loading of script: ExampleScript
2018-10-11 11:53:22,412 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [374]: Container [FilamentChange] added.
2018-10-11 11:53:22,416 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [374]: Container [2407337175920] added.
2018-10-11 11:53:22,416 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [156]: Begin loading of script: FilamentChange
2018-10-11 11:53:22,428 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [374]: Container [PauseAtHeight] added.
2018-10-11 11:53:22,432 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [374]: Container [2407337150616] added.
2018-10-11 11:53:22,433 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [156]: Begin loading of script: PauseAtHeight
2018-10-11 11:53:22,441 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [374]: Container [PauseAtHeightforRepetier] added.
2018-10-11 11:53:22,445 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [374]: Container [2407337151120] added.
2018-10-11 11:53:22,445 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [156]: Begin loading of script: PauseAtHeightforRepetier
2018-10-11 11:53:22,474 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [374]: Container [SearchAndReplace] added.
2018-10-11 11:53:22,479 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [374]: Container [2407337330896] added.
2018-10-11 11:53:22,479 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [156]: Begin loading of script: SearchAndReplace
2018-10-11 11:53:22,490 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [374]: Container [Stretch] added.
2018-10-11 11:53:22,494 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [374]: Container [2407337333872] added.
2018-10-11 11:53:22,495 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [156]: Begin loading of script: Stretch
2018-10-11 11:53:22,633 - INFO - [MainThread] cura.Settings.GlobalStack.addExtruder [87]: Extruder[Creality CR-10 fdmextruder] added to [Creality CR-10 #2] at position [0]
2018-10-11 11:53:22,635 - WARNING - [MainThread] cura.Settings.ExtruderManager.registerExtruder [177]: Extruder [Creality CR-10 fdmextruder] has already been registered on machine [Creality CR-10 #2], not doing anything
2018-10-11 11:53:22,713 - INFO - [MainThread] cura.Settings.MachineManager._initMachineState [336]: Machine 'Creality CR-10' quality changes set to 'Draft Quality w higher first layer extru'
2018-10-11 11:53:22,863 - DEBUG - [MainThread] cura.Machines.QualityManager.initialize [133]: Lookup tables updated.
2018-10-11 11:53:22,866 - INFO - [MainThread] cura.Machines.MaterialManager._updateMaps [270]: Updating material lookup data ...
2018-10-11 11:53:22,914 - INFO - [MainThread] cura.Settings.MachineManager._updateQualityWithMaterial [1219]: Updating quality/quality_changes due to material change
2018-10-11 11:53:22,918 - DEBUG - [MainThread] cura.Settings.MachineManager._updateQualityWithMaterial [1226]: Current quality type = [draft]
2018-10-11 11:53:22,922 - INFO - [MainThread] cura.Settings.MachineManager._updateQualityWithMaterial [1240]: Current available quality type [draft] is available, applying changes.
2018-10-11 11:53:23,992 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin._createView [257]: Creating post processing plugin view.
2018-10-11 11:53:24,229 - DEBUG - [MainThread] UM.Qt.Bindings.Theme.load [172]: Loading theme file: C:Program FilesUltimaker Cura 3.5resourcesthemescura-lighttheme.json
2018-10-11 11:53:24,394 - DEBUG - [MainThread] UM.Qt.Bindings.Theme.load [244]: Loaded theme C:Program FilesUltimaker Cura 3.5resourcesthemescura-light
2018-10-11 11:53:24,446 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin._createView [267]: Post processing view created.
2018-10-11 11:53:24,662 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [15]: Updating CustomQualityProfilesDropDownMenuModel.
2018-10-11 11:53:24,664 - DEBUG - [MainThread] cura.Machines.Models.QualityProfilesDropDownMenuModel._update [50]: Updating QualityProfilesDropDownMenuModel.
2018-10-11 11:53:24,665 - DEBUG - [MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [54]: Loading container coarse
2018-10-11 11:53:24,670 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [374]: Container [coarse] added.
2018-10-11 11:53:24,685 - DEBUG - [MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [54]: Loading container extra_coarse
2018-10-11 11:53:24,691 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [374]: Container [extra_coarse] added.
2018-10-11 11:53:24,705 - DEBUG - [MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [54]: Loading container fast
2018-10-11 11:53:24,711 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [374]: Container [fast] added.
2018-10-11 11:53:24,747 - DEBUG - [MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [54]: Loading container high
2018-10-11 11:53:24,753 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [374]: Container [high] added.
2018-10-11 11:53:24,771 - DEBUG - [MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [54]: Loading container normal
2018-10-11 11:53:24,776 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [374]: Container [normal] added.
2018-10-11 11:53:24,777 - DEBUG - [MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [54]: Loading container extra_fast
2018-10-11 11:53:24,785 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [374]: Container [extra_fast] added.
2018-10-11 11:53:24,803 - DEBUG - [MainThread] cura.Machines.Models.BuildPlateModel._update [33]: Updating BuildPlateModel.
2018-10-11 11:53:25,848 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [352]: file:///C:/Program Files/Ultimaker Cura 3.5/resources/qml/Topbar.qml:19: TypeError: Cannot read property 'stageId' of null
2018-10-11 11:53:25,852 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [352]: file:///C:/Program Files/Ultimaker Cura 3.5/resources/qml/Topbar.qml:104: TypeError: Cannot read property 'stageId' of null
2018-10-11 11:53:25,855 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [352]: file:///C:/Program Files/Ultimaker Cura 3.5/resources/qml/Topbar.qml:175: TypeError: Cannot read property 'stageId' of null
2018-10-11 11:53:25,858 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [352]: file:///C:/Program Files/Ultimaker Cura 3.5/resources/qml/Cura.qml:437: TypeError: Cannot read property 'mainComponent' of null
2018-10-11 11:53:25,861 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [352]: file:///C:/Program Files/Ultimaker Cura 3.5/resources/qml/Cura.qml:431: TypeError: Cannot read property 'mainComponent' of null
2018-10-11 11:53:25,865 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [352]: file:///C:/Program Files/Ultimaker Cura 3.5/resources/qml/Cura.qml:469: TypeError: Cannot read property 'sidebarComponent' of null
2018-10-11 11:53:25,868 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [352]: file:///C:/Program Files/Ultimaker Cura 3.5/resources/qml/Cura.qml:501: TypeError: Cannot read property 'sidebarComponent' of null
2018-10-11 11:53:27,381 - DEBUG - [MainThread] UM3NetworkPrinting.src.DiscoverUM3Action._createAdditionalComponentsView [171]: Creating additional ui components for UM3.
2018-10-11 11:53:27,429 - DEBUG - [MainThread] UM3NetworkPrinting.src.DiscoverUM3Action.startDiscovery [43]: Starting device discovery.
2018-10-11 11:53:27,437 - DEBUG - [MainThread] UM.Controller.setActiveStage [159]: Setting active stage to PrepareStage
2018-10-11 11:53:27,642 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [34]: Updating NozzleModel.
2018-10-11 11:53:27,752 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [352]: file:///C:/Program Files/Ultimaker Cura 3.5/resources/qml/SidebarHeader.qml:551:9: QML QQuickItem: Binding loop detected for property "width"
2018-10-11 11:53:27,816 - DEBUG - [MainThread] UM.Controller.setActiveView [92]: Setting active view to SolidView
2018-10-11 11:53:27,820 - DEBUG - [MainThread] ModelChecker.ModelChecker._createView [97]: Creating model checker view.
2018-10-11 11:53:27,827 - DEBUG - [MainThread] ModelChecker.ModelChecker._createView [106]: Model checker view created.
2018-10-11 11:53:27,829 - DEBUG - [MainThread] SliceInfoPlugin.SliceInfo._createDialog [82]: Creating dialog [MoreInfoWindow.qml]
2018-10-11 11:53:27,895 - DEBUG - [MainThread] cura.CuraApplication.run [711]: Booting Cura took 18.76083016395569 seconds
2018-10-11 11:53:28,564 - DEBUG - [MainThread] cura.Machines.MachineErrorChecker._rescheduleCheck [129]: New error check scheduled.
2018-10-11 11:53:28,568 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [34]: Updating NozzleModel.
2018-10-11 11:53:28,643 - DEBUG - [MainThread] cura.Machines.QualityManager.initialize [133]: Lookup tables updated.
2018-10-11 11:53:28,646 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [15]: Updating CustomQualityProfilesDropDownMenuModel.
2018-10-11 11:53:28,649 - DEBUG - [MainThread] cura.Machines.Models.QualityProfilesDropDownMenuModel._update [50]: Updating QualityProfilesDropDownMenuModel.
2018-10-11 11:53:29,600 - DEBUG - [MainThread] UM.Qt.QtRenderer._initialize [183]: Support for Vertex Array Objects: True
2018-10-11 11:53:29,609 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [99]: Initialized OpenGL subsystems.
2018-10-11 11:53:29,611 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [100]: OpenGL Version: 4.1.0 - Build 24.20.100.6025
2018-10-11 11:53:29,613 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [101]: OpenGL Vendor: Intel
2018-10-11 11:53:29,616 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [102]: OpenGL Renderer: Intel(R) HD Graphics 630
2018-10-11 11:53:29,618 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [55]: Loading shader file [C:Program FilesUltimaker Cura 3.5resourcesshadersdefault.shader]...
2018-10-11 11:53:29,630 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [55]: Loading shader file [C:Program FilesUltimaker Cura 3.5resourcesshadersselection.shader]...
2018-10-11 11:53:29,641 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [55]: Loading shader file [C:Program FilesUltimaker Cura 3.5resourcesshadersdefault.shader]...
2018-10-11 11:53:29,653 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [55]: Loading shader file [C:Program FilesUltimaker Cura 3.5resourcesshaderscomposite.shader]...
2018-10-11 11:53:29,673 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [55]: Loading shader file [C:Program FilesUltimaker Cura 3.5resourcesshadersoverhang.shader]...
2018-10-11 11:53:29,692 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [55]: Loading shader file [C:Program FilesUltimaker Cura 3.5resourcesshadersstriped.shader]...
2018-10-11 11:53:29,711 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [55]: Loading shader file [C:Program FilesUltimaker Cura 3.5resourcesshaderstransparent_object.shader]...
2018-10-11 11:53:29,724 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [55]: Loading shader file [C:Program FilesUltimaker Cura 3.5resourcesshadersstriped.shader]...
2018-10-11 11:53:29,745 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [55]: Loading shader file [C:Program FilesUltimaker Cura 3.5resourcesshadersdefault.shader]...
2018-10-11 11:53:29,757 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [55]: Loading shader file [C:Program FilesUltimaker Cura 3.5resourcesshadersgrid.shader]...
2018-10-11 11:53:29,771 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [55]: Loading shader file [C:Program FilesUltimaker Cura 3.5resourcesshadersplatform.shader]...
2018-10-11 11:53:31,197 - INFO - [MainThread] cura.Machines.MachineErrorChecker._setResult [181]: Error check finished, result = False, time = 2.6s
2018-10-11 11:53:31,688 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [228]: Starting to slice...
2018-10-11 11:53:31,689 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [245]: Going to slice build plate [0]!
2018-10-11 11:53:31,689 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [253]: Build plate 0 has no objects to be sliced, skipping
2018-10-11 11:53:39,923 - DEBUG - [MainThread] cura.AutoSave._onTimeout [48]: Autosaving preferences, instances and profiles
2018-10-11 11:53:48,306 - DEBUG - [Thread-3] UM.Mesh.MeshData.calculateNormalsFromVertices [444]: Calculating normals took 0.0009965896606445312 seconds
2018-10-11 11:53:48,307 - DEBUG - [Thread-3] STLReader.STLReader._read [90]: Loaded a mesh with 2004 vertices
2018-10-11 11:53:48,315 - DEBUG - [MainThread] UM.Mesh.MeshData.approximateConvexHull [401]: approximateConvexHull(target_count=1024) Calculating 3D convex hull took 0.004984855651855469 seconds. 104 input vertices. 104 output vertices.
2018-10-11 11:53:48,327 - DEBUG - [Thread-3] UM.FileHandler.ReadFileJob.run [64]: Loading file took 0.1 seconds
2018-10-11 11:53:48,337 - DEBUG - [Thread-3] UM.Mesh.MeshData.approximateConvexHull [401]: approximateConvexHull(target_count=1024) Calculating 3D convex hull took 0.00399017333984375 seconds. 104 input vertices. 104 output vertices.
2018-10-11 11:53:48,361 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [374]: Container [per_object_stack_2407753526016] added.
2018-10-11 11:53:48,379 - ERROR - [MainThread] UM.Logger.logException [84]: Exception: Exception calling decoration getConvexHullHead: object of type 'NoneType' has no len()
2018-10-11 11:53:48,383 - ERROR - [MainThread] UM.Logger.logException [88]: Traceback (most recent call last):
2018-10-11 11:53:48,386 - ERROR - [MainThread] UM.Logger.logException [88]: File "X:3.5buildinstlibpython3.5site-packagesUMSceneSceneNode.py", line 242, in callDecoration
2018-10-11 11:53:48,390 - ERROR - [MainThread] UM.Logger.logException [88]: File "X:3.5buildinstlibpython3.5site-packagescuraSceneConvexHullDecorator.py", line 96, in getConvexHullHead
2018-10-11 11:53:48,393 - ERROR - [MainThread] UM.Logger.logException [88]: File "X:3.5buildinstlibpython3.5site-packagescuraSceneConvexHullDecorator.py", line 243, in _compute2DConvexHeadMin
2018-10-11 11:53:48,397 - ERROR - [MainThread] UM.Logger.logException [88]: File "X:3.5buildinstlibpython3.5site-packagesUMMathPolygon.py", line 202, in getMinkowskiHull
2018-10-11 11:53:48,398 - ERROR - [MainThread] UM.Logger.logException [88]: File "X:3.5buildinstlibpython3.5site-packagesUMMathPolygon.py", line 187, in getMinkowskiSum
2018-10-11 11:53:48,400 - ERROR - [MainThread] UM.Logger.logException [88]: TypeError: object of type 'NoneType' has no len()
2018-10-11 11:53:48,420 - ERROR - [MainThread] UM.Logger.logException [84]: Exception: Exception calling decoration getConvexHullHead: object of type 'NoneType' has no len()
2018-10-11 11:53:48,422 - ERROR - [MainThread] UM.Logger.logException [88]: Traceback (most recent call last):
2018-10-11 11:53:48,423 - ERROR - [MainThread] UM.Logger.logException [88]: File "X:3.5buildinstlibpython3.5site-packagesUMSceneSceneNode.py", line 242, in callDecoration
2018-10-11 11:53:48,424 - ERROR - [MainThread] UM.Logger.logException [88]: File "X:3.5buildinstlibpython3.5site-packagescuraSceneConvexHullDecorator.py", line 96, in getConvexHullHead
2018-10-11 11:53:48,425 - ERROR - [MainThread] UM.Logger.logException [88]: File "X:3.5buildinstlibpython3.5site-packagescuraSceneConvexHullDecorator.py", line 243, in _compute2DConvexHeadMin
2018-10-11 11:53:48,426 - ERROR - [MainThread] UM.Logger.logException [88]: File "X:3.5buildinstlibpython3.5site-packagesUMMathPolygon.py", line 202, in getMinkowskiHull
2018-10-11 11:53:48,427 - ERROR - [MainThread] UM.Logger.logException [88]: File "X:3.5buildinstlibpython3.5site-packagesUMMathPolygon.py", line 187, in getMinkowskiSum
2018-10-11 11:53:48,428 - ERROR - [MainThread] UM.Logger.logException [88]: TypeError: object of type 'NoneType' has no len()
2018-10-11 11:53:48,444 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [55]: Loading shader file [C:Program FilesUltimaker Cura 3.5resourcesshaderstransparent_object.shader]...
2018-10-11 11:53:48,936 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [228]: Starting to slice...
2018-10-11 11:53:48,936 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [245]: Going to slice build plate [0]!
2018-10-11 11:53:49,087 - ERROR - [Thread-4] UM.Logger.logException [84]: Exception: Job caused an exception
2018-10-11 11:53:49,091 - ERROR - [Thread-4] UM.Logger.logException [88]: Traceback (most recent call last):
2018-10-11 11:53:49,093 - ERROR - [Thread-4] UM.Logger.logException [88]: File "X:3.5buildinstlibpython3.5site-packagesUMJobQueue.py", line 121, in run
2018-10-11 11:53:49,096 - ERROR - [Thread-4] UM.Logger.logException [88]: File "C:Program FilesUltimaker Cura 3.5pluginsCuraEngineBackendStartSliceJob.py", line 159, in run
2018-10-11 11:53:49,098 - ERROR - [Thread-4] UM.Logger.logException [88]: for node in OneAtATimeIterator(self._scene.getRoot()): #type: ignore #Ignore type error because iter() should get called automatically by Python syntax.
2018-10-11 11:53:49,101 - ERROR - [Thread-4] UM.Logger.logException [88]: File "X:3.5buildinstlibpython3.5site-packagescuraOneAtATimeIterator.py", line 41, in __init__
2018-10-11 11:53:49,103 - ERROR - [Thread-4] UM.Logger.logException [88]: File "X:3.5buildinstlibpython3.5site-packagesUMSceneIteratorIterator.py", line 16, in __init__
2018-10-11 11:53:49,106 - ERROR - [Thread-4] UM.Logger.logException [88]: File "X:3.5buildinstlibpython3.5site-packagescuraOneAtATimeIterator.py", line 107, in _fillStack
2018-10-11 11:53:49,109 - ERROR - [Thread-4] UM.Logger.logException [88]: ZeroDivisionError: division by zero
2018-10-11 11:54:07,319 - DEBUG - [MainThread] cura.AutoSave._onTimeout [48]: Autosaving preferences, instances and profiles

_Originally posted by @Inspironator in https://github.com/Ultimaker/Cura/issues/4547#issuecomment-429089612_

[Inspironator]

Arrowtron also has this same issue, and he posted it yesterday as a comment to my Original post #4547. His log file is also listed as a comment to the original post.

[rickgode]

I have the same issue. Windows 10 64bit just installed Cura 3.5 this morning and Unable to Slice. Cura 3.4.1 is installed as well and slices just fine.

[Inspironator]

Yup, I uninstalled 3.4.1 for 3.5.0, but with the unable to slice issue, a
reinstalled 3.4.1. Now I have both installed, but 3.5.0 is worthless to me
until there is a fix. Seems like Windows 10 64bit integration issue.
Thanks for your input. The more people who chime in here, the higher the
priority and more quickly this will be resolved.

I was so disappointed I couldn't take advantage of the new capabilities in
3.5.0, but I'm looking forward to the fix.

On Sun, Oct 14, 2018 at 12:03 PM rickgode [e-mail] wrote:

I have the same issue. Windows 10 64bit just installed Cura 3.5 this
morning and Unable to Slice. Cura 3.4.1 is installed as well and slices
just fine.

—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub
https://github.com/Ultimaker/Cura/issues/4568#issuecomment-429638386,
or mute the thread
https://github.com/notifications/unsubscribe-auth/Ai2LS8usTbSqM7hkijvrHTSlgP5ugozrks5uk2A-gaJpZM4Xa0Ev
.

--
Richard

[rickgode]

I copied the last bit of my cura.log files Doesn't mean much to me except the error "division by zero" Maybe that's bad...

2018-10-14 10:51:54,810 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [352]: file:///C:/Program Files/Ultimaker Cura 3.5/resources/qml/Cura.qml:211: TypeError: Property 'setExtruderIndex' of object MachineManager(0x1f9b2419520) is not a function
2018-10-14 10:52:01,998 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [15]: Updating CustomQualityProfilesDropDownMenuModel.
2018-10-14 10:52:02,062 - DEBUG - [MainThread] cura.Machines.Models.QualityProfilesDropDownMenuModel._update [50]: Updating QualityProfilesDropDownMenuModel.
2018-10-14 10:52:02,149 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [352]: file:///C:/Program Files/Ultimaker Cura 3.5/resources/qml/DiscardOrKeepProfileChangesDialog.qml:81: TypeError: Cannot read property of null
2018-10-14 10:52:11,075 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._terminate [294]: Attempting to kill the engine process
2018-10-14 10:52:11,075 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._terminate [300]: Killing engine process
2018-10-14 10:52:11,080 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._terminate [303]: Engine process is killed. Received return code 1
2018-10-14 10:52:11,085 - DEBUG - [MainThread] UM.Backend.Backend._createSocket [218]: Previous socket existed. Closing that first.
2018-10-14 10:52:11,137 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [178]: Socket state changed to Listening
2018-10-14 10:52:11,168 - INFO - [MainThread] UM.Backend.Backend.startEngine [74]: Started engine process: C:Program FilesUltimaker Cura 3.5CuraEngine.exe
2018-10-14 10:52:11,184 - DEBUG - [MainThread] UM.Backend.Backend._backendLog [94]: [Backend] Calling engine with: ['C:\Program Files\Ultimaker Cura 3.5\CuraEngine.exe', 'connect', '127.0.0.1:49674', '-j', 'C:\Program Files\Ultimaker Cura 3.5\resources\definitions\fdmprinter.def.json', '']
2018-10-14 10:52:11,283 - DEBUG - [Thread-17] UM.Backend.Backend._backendLog [94]: [Backend]
2018-10-14 10:52:11,287 - DEBUG - [Thread-17] UM.Backend.Backend._backendLog [94]: [Backend] Cura_SteamEngine version 3.5.0
2018-10-14 10:52:11,290 - DEBUG - [Thread-17] UM.Backend.Backend._backendLog [94]: [Backend] Copyright (C) 2018 Ultimaker
2018-10-14 10:52:11,294 - DEBUG - [Thread-17] UM.Backend.Backend._backendLog [94]: [Backend]
2018-10-14 10:52:11,297 - DEBUG - [Thread-17] UM.Backend.Backend._backendLog [94]: [Backend] This program is free software: you can redistribute it and/or modify
2018-10-14 10:52:11,300 - DEBUG - [Thread-17] UM.Backend.Backend._backendLog [94]: [Backend] it under the terms of the GNU Affero General Public License as published by
2018-10-14 10:52:11,302 - DEBUG - [Thread-17] UM.Backend.Backend._backendLog [94]: [Backend] the Free Software Foundation, either version 3 of the License, or
2018-10-14 10:52:11,305 - DEBUG - [Thread-17] UM.Backend.Backend._backendLog [94]: [Backend] (at your option) any later version.
2018-10-14 10:52:11,307 - DEBUG - [Thread-17] UM.Backend.Backend._backendLog [94]: [Backend]
2018-10-14 10:52:11,310 - DEBUG - [Thread-17] UM.Backend.Backend._backendLog [94]: [Backend] This program is distributed in the hope that it will be useful,
2018-10-14 10:52:11,312 - DEBUG - [Thread-17] UM.Backend.Backend._backendLog [94]: [Backend] but WITHOUT ANY WARRANTY; without even the implied warranty of
2018-10-14 10:52:11,315 - DEBUG - [Thread-17] UM.Backend.Backend._backendLog [94]: [Backend] MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
2018-10-14 10:52:11,317 - DEBUG - [Thread-17] UM.Backend.Backend._backendLog [94]: [Backend] GNU Affero General Public License for more details.
2018-10-14 10:52:11,320 - DEBUG - [Thread-17] UM.Backend.Backend._backendLog [94]: [Backend]
2018-10-14 10:52:11,322 - DEBUG - [Thread-17] UM.Backend.Backend._backendLog [94]: [Backend] You should have received a copy of the GNU Affero General Public License
2018-10-14 10:52:11,338 - DEBUG - [Thread-17] UM.Backend.Backend._backendLog [94]: [Backend] along with this program. If not, see http://www.gnu.org/licenses/.
2018-10-14 10:52:11,340 - DEBUG - [MainThread] cura.Machines.MachineErrorChecker._rescheduleCheck [129]: New error check scheduled.
2018-10-14 10:52:11,343 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [182]: Socket state changed to Connected
2018-10-14 10:52:11,345 - DEBUG - [MainThread] UM.Backend.Backend._onSocketStateChanged [172]: Backend connected on port 49674
2018-10-14 10:52:11,456 - ERROR - [MainThread] UM.Logger.logException [84]: Exception: Exception calling decoration getConvexHullHead: object of type 'NoneType' has no len()
2018-10-14 10:52:11,463 - ERROR - [MainThread] UM.Logger.logException [88]: Traceback (most recent call last):
2018-10-14 10:52:11,466 - ERROR - [MainThread] UM.Logger.logException [88]: File "X:3.5buildinstlibpython3.5site-packagesUMSceneSceneNode.py", line 242, in callDecoration
2018-10-14 10:52:11,468 - ERROR - [MainThread] UM.Logger.logException [88]: File "X:3.5buildinstlibpython3.5site-packagescuraSceneConvexHullDecorator.py", line 96, in getConvexHullHead
2018-10-14 10:52:11,471 - ERROR - [MainThread] UM.Logger.logException [88]: File "X:3.5buildinstlibpython3.5site-packagescuraSceneConvexHullDecorator.py", line 243, in _compute2DConvexHeadMin
2018-10-14 10:52:11,473 - ERROR - [MainThread] UM.Logger.logException [88]: File "X:3.5buildinstlibpython3.5site-packagesUMMathPolygon.py", line 202, in getMinkowskiHull
2018-10-14 10:52:11,476 - ERROR - [MainThread] UM.Logger.logException [88]: File "X:3.5buildinstlibpython3.5site-packagesUMMathPolygon.py", line 187, in getMinkowskiSum
2018-10-14 10:52:11,478 - ERROR - [MainThread] UM.Logger.logException [88]: TypeError: object of type 'NoneType' has no len()
2018-10-14 10:52:12,632 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [228]: Starting to slice...
2018-10-14 10:52:12,632 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [245]: Going to slice build plate [0]!
2018-10-14 10:52:12,857 - ERROR - [Thread-5] UM.Logger.logException [84]: Exception: Job caused an exception
2018-10-14 10:52:12,863 - ERROR - [Thread-5] UM.Logger.logException [88]: Traceback (most recent call last):
2018-10-14 10:52:12,865 - ERROR - [Thread-5] UM.Logger.logException [88]: File "X:3.5buildinstlibpython3.5site-packagesUMJobQueue.py", line 121, in run
2018-10-14 10:52:12,868 - ERROR - [Thread-5] UM.Logger.logException [88]: File "C:Program FilesUltimaker Cura 3.5pluginsCuraEngineBackendStartSliceJob.py", line 159, in run
2018-10-14 10:52:12,870 - ERROR - [Thread-5] UM.Logger.logException [88]: for node in OneAtATimeIterator(self._scene.getRoot()): #type: ignore #Ignore type error because iter() should get called automatically by Python syntax.
2018-10-14 10:52:12,874 - ERROR - [Thread-5] UM.Logger.logException [88]: File "X:3.5buildinstlibpython3.5site-packagescuraOneAtATimeIterator.py", line 41, in __init__
2018-10-14 10:52:12,881 - ERROR - [Thread-5] UM.Logger.logException [88]: File "X:3.5buildinstlibpython3.5site-packagesUMSceneIteratorIterator.py", line 16, in __init__
2018-10-14 10:52:12,885 - ERROR - [Thread-5] UM.Logger.logException [88]: File "X:3.5buildinstlibpython3.5site-packagescuraOneAtATimeIterator.py", line 107, in _fillStack
2018-10-14 10:52:12,889 - ERROR - [Thread-5] UM.Logger.logException [88]: ZeroDivisionError: division by zero
2018-10-14 10:52:17,349 - INFO - [MainThread] cura.Machines.MachineErrorChecker._setResult [181]: Error check finished, result = False, time = 6.0s
2018-10-14 10:52:21,080 - DEBUG - [MainThread] cura.AutoSave._onTimeout [48]: Autosaving preferences, instances and profiles
2018-10-14 10:52:21,960 - INFO - [MainThread] cura.CuraApplication.reloadAll [1257]: Reloading all loaded mesh data.
2018-10-14 10:52:21,986 - DEBUG - [Thread-6] UM.Mesh.MeshData.calculateNormalsFromVertices [444]: Calculating normals took 0.00397038459777832 seconds
2018-10-14 10:52:21,987 - DEBUG - [Thread-6] STLReader.STLReader._read [90]: Loaded a mesh with 12660 vertices
2018-10-14 10:52:21,999 - DEBUG - [Thread-6] UM.Mesh.MeshData.approximateConvexHull [401]: approximateConvexHull(target_count=1024) Calculating 3D convex hull took 0.008998394012451172 seconds. 236 input vertices. 236 output vertices.
2018-10-14 10:52:22,005 - DEBUG - [Thread-6] UM.FileHandler.ReadFileJob.run [64]: Loading file took 0.0 seconds
2018-10-14 10:52:22,017 - DEBUG - [Thread-6] UM.Mesh.MeshData.approximateConvexHull [401]: approximateConvexHull(target_count=1024) Calculating 3D convex hull took 0.008000612258911133 seconds. 236 input vertices. 236 output vertices.
2018-10-14 10:52:22,134 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._terminate [294]: Attempting to kill the engine process
2018-10-14 10:52:22,134 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._terminate [300]: Killing engine process
2018-10-14 10:52:22,139 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._terminate [303]: Engine process is killed. Received return code 1
2018-10-14 10:52:22,143 - DEBUG - [MainThread] UM.Backend.Backend._createSocket [218]: Previous socket existed. Closing that first.
2018-10-14 10:52:22,219 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [178]: Socket state changed to Listening
2018-10-14 10:52:22,260 - INFO - [MainThread] UM.Backend.Backend.startEngine [74]: Started engine process: C:Program FilesUltimaker Cura 3.5CuraEngine.exe
2018-10-14 10:52:22,266 - DEBUG - [MainThread] UM.Backend.Backend._backendLog [94]: [Backend] Calling engine with: ['C:\Program Files\Ultimaker Cura 3.5\CuraEngine.exe', 'connect', '127.0.0.1:49674', '-j', 'C:\Program Files\Ultimaker Cura 3.5\resources\definitions\fdmprinter.def.json', '']
2018-10-14 10:52:22,372 - DEBUG - [Thread-20] UM.Backend.Backend._backendLog [94]: [Backend]
2018-10-14 10:52:22,375 - DEBUG - [Thread-20] UM.Backend.Backend._backendLog [94]: [Backend] Cura_SteamEngine version 3.5.0
2018-10-14 10:52:22,388 - DEBUG - [Thread-20] UM.Backend.Backend._backendLog [94]: [Backend] Copyright (C) 2018 Ultimaker
2018-10-14 10:52:22,394 - DEBUG - [Thread-20] UM.Backend.Backend._backendLog [94]: [Backend]
2018-10-14 10:52:22,397 - DEBUG - [Thread-20] UM.Backend.Backend._backendLog [94]: [Backend] This program is free software: you can redistribute it and/or modify
2018-10-14 10:52:22,400 - DEBUG - [Thread-20] UM.Backend.Backend._backendLog [94]: [Backend] it under the terms of the GNU Affero General Public License as published by
2018-10-14 10:52:22,403 - DEBUG - [Thread-20] UM.Backend.Backend._backendLog [94]: [Backend] the Free Software Foundation, either version 3 of the License, or
2018-10-14 10:52:22,407 - DEBUG - [Thread-20] UM.Backend.Backend._backendLog [94]: [Backend] (at your option) any later version.
2018-10-14 10:52:22,410 - DEBUG - [Thread-20] UM.Backend.Backend._backendLog [94]: [Backend]
2018-10-14 10:52:22,413 - DEBUG - [Thread-20] UM.Backend.Backend._backendLog [94]: [Backend] This program is distributed in the hope that it will be useful,
2018-10-14 10:52:22,416 - DEBUG - [Thread-20] UM.Backend.Backend._backendLog [94]: [Backend] but WITHOUT ANY WARRANTY; without even the implied warranty of
2018-10-14 10:52:22,418 - DEBUG - [Thread-20] UM.Backend.Backend._backendLog [94]: [Backend] MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
2018-10-14 10:52:22,421 - DEBUG - [Thread-20] UM.Backend.Backend._backendLog [94]: [Backend] GNU Affero General Public License for more details.
2018-10-14 10:52:22,423 - DEBUG - [Thread-20] UM.Backend.Backend._backendLog [94]: [Backend]
2018-10-14 10:52:22,425 - DEBUG - [Thread-20] UM.Backend.Backend._backendLog [94]: [Backend] You should have received a copy of the GNU Affero General Public License
2018-10-14 10:52:22,428 - DEBUG - [Thread-20] UM.Backend.Backend._backendLog [94]: [Backend] along with this program. If not, see http://www.gnu.org/licenses/.
2018-10-14 10:52:22,452 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [182]: Socket state changed to Connected
2018-10-14 10:52:22,454 - DEBUG - [MainThread] UM.Backend.Backend._onSocketStateChanged [172]: Backend connected on port 49674
2018-10-14 10:52:23,994 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [228]: Starting to slice...
2018-10-14 10:52:23,994 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [245]: Going to slice build plate [0]!
2018-10-14 10:52:24,213 - ERROR - [Thread-7] UM.Logger.logException [84]: Exception: Job caused an exception
2018-10-14 10:52:24,219 - ERROR - [Thread-7] UM.Logger.logException [88]: Traceback (most recent call last):
2018-10-14 10:52:24,221 - ERROR - [Thread-7] UM.Logger.logException [88]: File "X:3.5buildinstlibpython3.5site-packagesUMJobQueue.py", line 121, in run
2018-10-14 10:52:24,224 - ERROR - [Thread-7] UM.Logger.logException [88]: File "C:Program FilesUltimaker Cura 3.5pluginsCuraEngineBackendStartSliceJob.py", line 159, in run
2018-10-14 10:52:24,226 - ERROR - [Thread-7] UM.Logger.logException [88]: for node in OneAtATimeIterator(self._scene.getRoot()): #type: ignore #Ignore type error because iter() should get called automatically by Python syntax.
2018-10-14 10:52:24,229 - ERROR - [Thread-7] UM.Logger.logException [88]: File "X:3.5buildinstlibpython3.5site-packagescuraOneAtATimeIterator.py", line 41, in __init__
2018-10-14 10:52:24,231 - ERROR - [Thread-7] UM.Logger.logException [88]: File "X:3.5buildinstlibpython3.5site-packagesUMSceneIteratorIterator.py", line 16, in __init__
2018-10-14 10:52:24,234 - ERROR - [Thread-7] UM.Logger.logException [88]: File "X:3.5buildinstlibpython3.5site-packagescuraOneAtATimeIterator.py", line 107, in _fillStack
2018-10-14 10:52:24,236 - ERROR - [Thread-7] UM.Logger.logException [88]: ZeroDivisionError: division by zero
2018-10-14 10:52:32,169 - DEBUG - [MainThread] cura.AutoSave._onTimeout [48]: Autosaving preferences, instances and profiles
2018-10-14 10:53:11,807 - DEBUG - [MainThread] cura.AutoSave._onTimeout [48]: Autosaving preferences, instances and profiles
2018-10-14 10:55:04,850 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [55]: Loading shader file [C:Program FilesUltimaker Cura 3.5resourcesshaderstoolhandle.shader]...
2018-10-14 10:55:13,062 - DEBUG - [MainThread] cura.AutoSave._onTimeout [48]: Autosaving preferences, instances and profiles
2018-10-14 10:59:04,382 - DEBUG - [MainThread] cura.AutoSave._onTimeout [48]: Autosaving preferences, instances and profiles

[diegopradogesto]

Can you please provide a project file? (Project > Save...)

[smartavionics]

OK, I think this is maybe the same problem or perhaps a variation on the theme. The project file (https://community.ultimaker.com/applications/core/interface/file/attachment.php?id=61293) attached to the forum thread https://community.ultimaker.com/topic/24956-cura-351-unable-to-slice/ causes these messages to appear which could be relevant...

2018-10-21 21:54:12,530 - ERROR - [MainThread] UM.Logger.logException [84]: Exception: Exception calling decoration getConvexHullHead: could not convert string to float: '[[0,0],[0,0],[0,0],[0,null]]' 2018-10-21 21:54:12,531 - ERROR - [MainThread] UM.Logger.logException [88]: Traceback (most recent call last): 2018-10-21 21:54:12,531 - ERROR - [MainThread] UM.Logger.logException [88]: File "/opt/cura/lib/python3/dist-packages/UM/Scene/SceneNode.py", line 242, in callDecoration 2018-10-21 21:54:12,531 - ERROR - [MainThread] UM.Logger.logException [88]: return getattr(decorator, function)(*args, **kwargs) 2018-10-21 21:54:12,531 - ERROR - [MainThread] UM.Logger.logException [88]: File "/opt/cura/lib/python3/dist-packages/cura/Scene/ConvexHullDecorator.py", line 114, in getConvexHullHead 2018-10-21 21:54:12,532 - ERROR - [MainThread] UM.Logger.logException [88]: head_with_fans = self._compute2DConvexHeadMin() 2018-10-21 21:54:12,532 - ERROR - [MainThread] UM.Logger.logException [88]: File "/opt/cura/lib/python3/dist-packages/cura/Scene/ConvexHullDecorator.py", line 264, in _compute2DConvexHeadMin 2018-10-21 21:54:12,532 - ERROR - [MainThread] UM.Logger.logException [88]: head_and_fans = self._getHeadAndFans() 2018-10-21 21:54:12,532 - ERROR - [MainThread] UM.Logger.logException [88]: File "/opt/cura/lib/python3/dist-packages/cura/Scene/ConvexHullDecorator.py", line 254, in _getHeadAndFans 2018-10-21 21:54:12,532 - ERROR - [MainThread] UM.Logger.logException [88]: return Polygon(numpy.array(self._global_stack.getHeadAndFansCoordinates(), numpy.float32)) 2018-10-21 21:54:12,533 - ERROR - [MainThread] UM.Logger.logException [88]: ValueError: could not convert string to float: '[[0,0],[0,0],[0,0],[0,null]]'

And also
````
2018-10-21 22:06:54,841 - ERROR - [Thread-3] UM.Logger.logException [84]: Exception: Job caused an exception
2018-10-21 22:06:54,841 - ERROR - [Thread-3] UM.Logger.logException [88]: Traceback (most recent call last):
2018-10-21 22:06:54,841 - ERROR - [Thread-3] UM.Logger.logException [88]: File "/opt/cura/lib/python3/dist-packages/UM/JobQueue.py", line 121, in run
2018-10-21 22:06:54,842 - ERROR - [Thread-3] UM.Logger.logException [88]: job.run()
2018-10-21 22:06:54,842 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [178]: Socket state changed to Listening
2018-10-21 22:06:54,854 - ERROR - [Thread-3] UM.Logger.logException [88]: File "/opt/cura/lib/cura/plugins/CuraEngineBackend/StartSliceJob.py", line 163, in run
2018-10-21 22:06:54,855 - ERROR - [Thread-3] UM.Logger.logException [88]: for node in OneAtATimeIterator(self._scene.getRoot()): #type: ignore #Ignore type error because iter() should get called automatically by Python syntax.
2018-10-21 22:06:54,855 - ERROR - [Thread-3] UM.Logger.logException [88]: File "/opt/cura/lib/python3/dist-packages/cura/OneAtATimeIterator.py", line 41, in __init__
2018-10-21 22:06:54,856 - ERROR - [Thread-3] UM.Logger.logException [88]: super().__init__(scene_node) # Call super to make multiple inheritance work.
2018-10-21 22:06:54,856 - ERROR - [Thread-3] UM.Logger.logException [88]: File "/opt/cura/lib/python3/dist-packages/UM/Scene/Iterator/Iterator.py", line 16, in __init__
2018-10-21 22:06:54,856 - ERROR - [Thread-3] UM.Logger.logException [88]: self._fillStack()
2018-10-21 22:06:54,857 - ERROR - [Thread-3] UM.Logger.logException [88]: File "/opt/cura/lib/python3/dist-packages/cura/OneAtATimeIterator.py", line 106, in _fillStack
2018-10-21 22:06:54,857 - ERROR - [Thread-3] UM.Logger.logException [88]: min_coord = self.getMachineNearestCornerToExtruder(self._global_stack)
2018-10-21 22:06:54,857 - ERROR - [Thread-3] UM.Logger.logException [88]: File "/opt/cura/lib/python3/dist-packages/cura/OneAtATimeIterator.py", line 59, in getMachineNearestCornerToExtruder
2018-10-21 22:06:54,857 - ERROR - [Thread-3] UM.Logger.logException [88]: x = coord[0] - extruder_offsets[0]
2018-10-21 22:06:54,858 - ERROR - [Thread-3] UM.Logger.logException [88]: TypeError: unsupported operand type(s) for -: 'str' and 'int'

````

[rickgode]

I think there is a bug that causes it not to slice if the Print Sequence is set to "One at a Time" Setting it to "All at Once" at first says unable to slice, but then it slices just fine.

MLG.zip

Ricky

[smartavionics]

Looking at this some more, the project file contains anet A8_settings.inst.cfg which looks like this:
````
[general]
version = 4
name = anet A8_settings
definition = custom

[metadata]
type = definition_changes
setting_version = 5

[values]
extruders_enabled_count = 1
gantry_height = 0
machine_depth = 220
machine_end_gcode = M104 S0 ;extruder heater off
M140 S0 ;heated bed heater off
M106 S0 ; turn off fan
G92 E1
G1 E-1 F300 ;Retract the filament
G28 X0 Y0
M84
machine_head_with_fans_polygon = [[0,0],[0,0],[0,0],[0,null]]
machine_heated_bed = True
machine_height = 240
machine_start_gcode = ;Sliced at: {day} {date} {time}
G21 ;metric values
G90 ;absolute positioning
M82 ;set extruder to absolute mode
M107 ;start with the fan off
G28 ;home all axis
G1 Z15.0 F{travel_speed} ;move the platform down 15mm
G92 E0 ;zero the extruded length
G1 F200 E3 ;extrude 10mm of feed stock
G92 E0 ;zero the extruded length again
G1 F{travel_speed}
M117 Printing...
machine_width = 220

````

How did machine_head_with_fans_polygon get that value? Is it a bad printer def or something the user has entered or has Cura dreamed it up?

[rickgode]

I have no idea how the machine got that value. Attached is a pic of my Printer Settings. Also it doesn't seem to be the "correct" start and end gcode? When I'm back home, I'll try and save the .3mf file from Cura 3.4.1.

[rickgode]

Attached is a project file from Cura 3.4.1

I don't know where in Cura I would change "machine_head_with_fans_polygon"?

3.4.1upper_filament_guide_new_matter_mod-t.curaproject.zip

[diegopradogesto]

We changed the way how the disabled space between the objects when printing one-at-a-time mode is calculated. In this case because your values are all zeros, it is unable to slice. As a workaround you can indicate the values for the dimensions of the printhead (rather than zero).

[fieldOfView]

The X min, Y min, X max and Y max fields in machine settings together form the machine_head_with_fans_polygon setting (making the polygon a rectangle). Having all these at 0 makes the polygon a rectangle with 0 width and 0 height.

[Inspironator]

Changing the Print Sequence to "all at once" did enable Cura 3.5.0 to slice for me also. I changed the printhead settings and I'll report back the results for the new machine settings.

[rickgode]

Thanks everyone! I measured my printhead settings and put them in. Everything looks good. I made my Gantry height 9999mm so I could get some taller models to print "one at a time" I just ensure the placement of the models on the build plate won't run into the print head. It sliced great!

https://www.youtube.com/watch?v=6YZLyJAGDMQ

Thanks!

Ricky

[danielassr]

Hello!

I wonder if anyone can help me, please!

After the last windows update (a month ago), I have been experiencing problems with cura. This one keeps presenting the "unable to slice" when I upload a file. I uninstalled and installed a few times, the 3.5.1 version and the 3.4.1 (the last one that worked), but this problem remained. Today, I installed the last version (3.6) to check if this problem had disappeared, but unfortunately no.

So, my cura logfile is the following:

2018-11-14 17:30:16,396 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [422]: Loaded plugin FileLogger
2018-11-14 17:30:16,427 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [422]: Loaded plugin FirmwareUpdateChecker
2018-11-14 17:30:16,443 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [422]: Loaded plugin FirmwareUpdater
2018-11-14 17:30:16,457 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [422]: Loaded plugin GCodeGzReader
2018-11-14 17:30:16,477 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [422]: Loaded plugin GCodeGzWriter
2018-11-14 17:30:16,493 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [422]: Loaded plugin GCodeProfileReader
2018-11-14 17:30:16,524 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [422]: Loaded plugin GCodeReader
2018-11-14 17:30:16,544 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [422]: Loaded plugin GCodeWriter
2018-11-14 17:30:16,563 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [422]: Loaded plugin ImageReader
2018-11-14 17:30:16,573 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [422]: Loaded plugin LegacyProfileReader
2018-11-14 17:30:16,598 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [422]: Loaded plugin LocalContainerProvider
2018-11-14 17:30:16,617 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [422]: Loaded plugin LocalFileOutputDevice
2018-11-14 17:30:16,634 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [422]: Loaded plugin MachineSettingsAction
2018-11-14 17:30:16,653 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [422]: Loaded plugin ModelChecker
2018-11-14 17:30:16,667 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [422]: Loaded plugin MonitorStage
2018-11-14 17:30:16,687 - WARNING - [MainThread] UM.Preferences.getValue [97]: Tried to get the value of non-existing setting cura/active_mode.
2018-11-14 17:30:16,694 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [422]: Loaded plugin PerObjectSettingsTool
2018-11-14 17:30:16,713 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [422]: Loaded plugin PostProcessingPlugin
2018-11-14 17:30:16,723 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [422]: Loaded plugin PrepareStage
2018-11-14 17:30:16,759 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [422]: Loaded plugin RemovableDriveOutputDevice
2018-11-14 17:30:16,793 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [422]: Loaded plugin SimulationView
2018-11-14 17:30:16,813 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [422]: Loaded plugin SliceInfoPlugin
2018-11-14 17:30:16,837 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [422]: Loaded plugin SolidView
2018-11-14 17:30:16,857 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [422]: Loaded plugin SupportEraser
2018-11-14 17:30:16,893 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [422]: Loaded plugin Toolbox
2018-11-14 17:30:16,916 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [422]: Loaded plugin CameraTool
2018-11-14 17:30:16,944 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [422]: Loaded plugin MirrorTool
2018-11-14 17:30:16,966 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [422]: Loaded plugin RotateTool
2018-11-14 17:30:16,997 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [422]: Loaded plugin ScaleTool
2018-11-14 17:30:17,017 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [422]: Loaded plugin SelectionTool
2018-11-14 17:30:17,046 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [422]: Loaded plugin TranslateTool
2018-11-14 17:30:17,079 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [422]: Loaded plugin UFPWriter
2018-11-14 17:30:17,103 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [422]: Loaded plugin UltimakerMachineActions
2018-11-14 17:30:17,234 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [422]: Loaded plugin UM3NetworkPrinting
2018-11-14 17:30:17,264 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [422]: Loaded plugin UpdateChecker
2018-11-14 17:30:17,274 - INFO - [Thread-3] UpdateChecker.UpdateCheckerJob.run [36]: Checking for new version of cura
2018-11-14 17:30:17,323 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [422]: Loaded plugin USBPrinting
2018-11-14 17:30:17,344 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [422]: Loaded plugin UserAgreement
2018-11-14 17:30:17,377 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [422]: Loaded plugin VersionUpgrade21to22
2018-11-14 17:30:17,397 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [422]: Loaded plugin VersionUpgrade22to24
2018-11-14 17:30:17,424 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [422]: Loaded plugin VersionUpgrade25to26
2018-11-14 17:30:17,448 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [422]: Loaded plugin VersionUpgrade26to27
2018-11-14 17:30:17,473 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [422]: Loaded plugin VersionUpgrade27to30
2018-11-14 17:30:17,497 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [422]: Loaded plugin VersionUpgrade30to31
2018-11-14 17:30:17,523 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [422]: Loaded plugin VersionUpgrade32to33
2018-11-14 17:30:17,545 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [422]: Loaded plugin VersionUpgrade33to34
2018-11-14 17:30:17,576 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [422]: Loaded plugin VersionUpgrade34to35
2018-11-14 17:30:17,597 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [422]: Loaded plugin SimpleView
2018-11-14 17:30:17,637 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [422]: Loaded plugin X3DReader
2018-11-14 17:30:17,676 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [422]: Loaded plugin XmlMaterialProfile
2018-11-14 17:30:17,703 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [422]: Loaded plugin XRayView
2018-11-14 17:30:17,730 - INFO - [MainThread] UM.VersionUpgradeManager.upgrade [130]: Looking for old configuration files to upgrade.
2018-11-14 17:30:17,736 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [281]: Failed to get file version: .packages.json, skip it
2018-11-14 17:30:17,741 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [281]: Failed to get file version: .plugins.json, skip it
2018-11-14 17:30:17,743 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [281]: Failed to get file version: .packages.json, skip it
2018-11-14 17:30:17,743 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [281]: Failed to get file version: .plugins.json, skip it
2018-11-14 17:30:17,755 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [281]: Failed to get file version: .packages.json, skip it
2018-11-14 17:30:17,755 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [281]: Failed to get file version: .plugins.json, skip it
2018-11-14 17:30:17,763 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [281]: Failed to get file version: .packages.json, skip it
2018-11-14 17:30:17,773 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [281]: Failed to get file version: .plugins.json, skip it
2018-11-14 17:30:17,773 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [281]: Failed to get file version: .packages.json, skip it
2018-11-14 17:30:17,783 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [281]: Failed to get file version: .plugins.json, skip it
2018-11-14 17:30:17,783 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [281]: Failed to get file version: .packages.json, skip it
2018-11-14 17:30:17,793 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [281]: Failed to get file version: .plugins.json, skip it
2018-11-14 17:30:17,793 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [281]: Failed to get file version: .packages.json, skip it
2018-11-14 17:30:17,804 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [281]: Failed to get file version: .plugins.json, skip it
2018-11-14 17:30:17,814 - INFO - [MainThread] UM.Qt.QtApplication.startSplashWindowPhase [198]: The preferences file cannot be found, will use default values
2018-11-14 17:30:17,823 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [178]: Socket state changed to Listening
2018-11-14 17:30:17,837 - INFO - [MainThread] UM.Backend.Backend.startEngine [74]: Started engine process: C:Program FilesUltimaker Cura 3.6CuraEngine.exe
2018-11-14 17:30:17,843 - DEBUG - [MainThread] UM.Backend.Backend._backendLog [94]: [Backend] Calling engine with: ['C:\Program Files\Ultimaker Cura 3.6\CuraEngine.exe', 'connect', '127.0.0.1:49674', '']
2018-11-14 17:30:17,855 - INFO - [MainThread] UM.Qt.QtApplication.startSplashWindowPhase [207]: The preferences file 'None' cannot be found, will use default values
2018-11-14 17:30:18,036 - DEBUG - [Thread-10] UM.Backend.Backend._backendLog [94]: [Backend]
2018-11-14 17:30:18,041 - DEBUG - [Thread-10] UM.Backend.Backend._backendLog [94]: [Backend] Cura_SteamEngine version 3.6.0
2018-11-14 17:30:18,044 - DEBUG - [Thread-10] UM.Backend.Backend._backendLog [94]: [Backend] Copyright (C) 2018 Ultimaker
2018-11-14 17:30:18,047 - DEBUG - [Thread-10] UM.Backend.Backend._backendLog [94]: [Backend]
2018-11-14 17:30:18,053 - DEBUG - [Thread-10] UM.Backend.Backend._backendLog [94]: [Backend] This program is free software: you can redistribute it and/or modify
2018-11-14 17:30:18,057 - DEBUG - [Thread-10] UM.Backend.Backend._backendLog [94]: [Backend] it under the terms of the GNU Affero General Public License as published by
2018-11-14 17:30:18,060 - DEBUG - [Thread-10] UM.Backend.Backend._backendLog [94]: [Backend] the Free Software Foundation, either version 3 of the License, or
2018-11-14 17:30:18,063 - DEBUG - [Thread-10] UM.Backend.Backend._backendLog [94]: [Backend] (at your option) any later version.
2018-11-14 17:30:18,066 - DEBUG - [Thread-10] UM.Backend.Backend._backendLog [94]: [Backend]
2018-11-14 17:30:18,068 - DEBUG - [Thread-10] UM.Backend.Backend._backendLog [94]: [Backend] This program is distributed in the hope that it will be useful,
2018-11-14 17:30:18,071 - DEBUG - [Thread-10] UM.Backend.Backend._backendLog [94]: [Backend] but WITHOUT ANY WARRANTY; without even the implied warranty of
2018-11-14 17:30:18,073 - DEBUG - [Thread-10] UM.Backend.Backend._backendLog [94]: [Backend] MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
2018-11-14 17:30:18,073 - DEBUG - [Thread-10] UM.Backend.Backend._backendLog [94]: [Backend] GNU Affero General Public License for more details.
2018-11-14 17:30:18,073 - DEBUG - [Thread-10] UM.Backend.Backend._backendLog [94]: [Backend]
2018-11-14 17:30:18,073 - DEBUG - [Thread-10] UM.Backend.Backend._backendLog [94]: [Backend] You should have received a copy of the GNU Affero General Public License
2018-11-14 17:30:18,083 - DEBUG - [Thread-10] UM.Backend.Backend._backendLog [94]: [Backend] along with this program. If not, see http://www.gnu.org/licenses/.
2018-11-14 17:30:20,426 - DEBUG - [MainThread] cura.Scene.CuraSceneController.setActiveBuildPlate [103]: Select build plate: 0
2018-11-14 17:30:20,426 - INFO - [MainThread] cura.CuraApplication.run [689]: Initializing variant manager
2018-11-14 17:30:20,433 - DEBUG - [MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [54]: Loading container ultimaker_s5_glass
2018-11-14 17:30:20,438 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [371]: Container [ultimaker_s5_glass] added.
2018-11-14 17:30:20,443 - DEBUG - [MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [54]: Loading container ultimaker_s5
2018-11-14 17:30:20,822 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [371]: Container [ultimaker_s5] added.
2018-11-14 17:30:20,826 - DEBUG - [MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [54]: Loading container ultimaker_s5_aluminum
2018-11-14 17:30:20,826 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [371]: Container [ultimaker_s5_aluminum] added.
2018-11-14 17:30:20,836 - DEBUG - [MainThread] cura.Machines.VariantManager.initialize [59]: Exclude variant [empty_variant]
2018-11-14 17:30:20,836 - INFO - [MainThread] cura.CuraApplication.run [693]: Initializing material manager
2018-11-14 17:30:20,946 - INFO - [MainThread] cura.CuraApplication.run [698]: Initializing quality manager
2018-11-14 17:30:20,962 - DEBUG - [MainThread] cura.Machines.QualityManager.initialize [136]: Lookup tables updated.
2018-11-14 17:30:20,964 - INFO - [MainThread] cura.CuraApplication.run [703]: Initializing machine manager
2018-11-14 17:30:20,964 - INFO - [MainThread] cura.CuraApplication.run [706]: Initializing container manager
2018-11-14 17:30:20,970 - INFO - [MainThread] cura.CuraApplication.run [709]: Initializing machine error checker
2018-11-14 17:30:21,826 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin._createView [279]: Creating post processing plugin view.
2018-11-14 17:30:21,834 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [169]: Begin loading of script: BQ_PauseAtHeight
2018-11-14 17:30:21,838 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [169]: Begin loading of script: ChangeAtZ
2018-11-14 17:30:21,843 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [169]: Begin loading of script: DisplayFilenameAndLayerOnLCD
2018-11-14 17:30:21,844 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [169]: Begin loading of script: ExampleScript
2018-11-14 17:30:21,846 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [169]: Begin loading of script: FilamentChange
2018-11-14 17:30:21,846 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [169]: Begin loading of script: PauseAtHeight
2018-11-14 17:30:21,853 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [169]: Begin loading of script: PauseAtHeightRepRapFirmwareDuet
2018-11-14 17:30:21,854 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [169]: Begin loading of script: PauseAtHeightforRepetier
2018-11-14 17:30:21,856 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [169]: Begin loading of script: SearchAndReplace
2018-11-14 17:30:21,863 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [169]: Begin loading of script: Stretch
2018-11-14 17:30:22,056 - DEBUG - [MainThread] UM.Qt.Bindings.Theme.load [172]: Loading theme file: C:Program FilesUltimaker Cura 3.6resourcesthemescura-lighttheme.json
2018-11-14 17:30:22,194 - DEBUG - [MainThread] UM.Qt.Bindings.Theme.load [244]: Loaded theme C:Program FilesUltimaker Cura 3.6resourcesthemescura-light
2018-11-14 17:30:22,243 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin._createView [289]: Post processing view created.
2018-11-14 17:30:22,427 - DEBUG - [MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [54]: Loading container fdmprinter
2018-11-14 17:30:22,698 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [371]: Container [fdmprinter] added.
2018-11-14 17:30:22,715 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [15]: Updating CustomQualityProfilesDropDownMenuModel.
2018-11-14 17:30:22,715 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [20]: No active GlobalStack, set CustomQualityProfilesDropDownMenuModel as empty.
2018-11-14 17:30:22,721 - DEBUG - [MainThread] cura.Machines.Models.QualityProfilesDropDownMenuModel._update [50]: Updating QualityProfilesDropDownMenuModel.
2018-11-14 17:30:22,723 - DEBUG - [MainThread] cura.Machines.Models.QualityProfilesDropDownMenuModel._update [55]: No active GlobalStack, set quality profile model as empty.
2018-11-14 17:30:22,726 - DEBUG - [MainThread] cura.Machines.Models.BuildPlateModel._update [33]: Updating BuildPlateModel.
2018-11-14 17:30:23,607 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [352]: file:///C:/Program Files/Ultimaker Cura 3.6/resources/qml/Topbar.qml:19: TypeError: Cannot read property 'stageId' of null
2018-11-14 17:30:23,607 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [352]: file:///C:/Program Files/Ultimaker Cura 3.6/resources/qml/Topbar.qml:104: TypeError: Cannot read property 'stageId' of null
2018-11-14 17:30:23,615 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [352]: file:///C:/Program Files/Ultimaker Cura 3.6/resources/qml/Topbar.qml:175: TypeError: Cannot read property 'stageId' of null
2018-11-14 17:30:23,618 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [352]: file:///C:/Program Files/Ultimaker Cura 3.6/resources/qml/Cura.qml:444: TypeError: Cannot read property 'mainComponent' of null
2018-11-14 17:30:23,620 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [352]: file:///C:/Program Files/Ultimaker Cura 3.6/resources/qml/Cura.qml:438: TypeError: Cannot read property 'mainComponent' of null
2018-11-14 17:30:23,622 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [352]: file:///C:/Program Files/Ultimaker Cura 3.6/resources/qml/Cura.qml:476: TypeError: Cannot read property 'sidebarComponent' of null
2018-11-14 17:30:23,624 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [352]: file:///C:/Program Files/Ultimaker Cura 3.6/resources/qml/Cura.qml:508: TypeError: Cannot read property 'sidebarComponent' of null
2018-11-14 17:30:23,633 - DEBUG - [MainThread] UM3NetworkPrinting.src.DiscoverUM3Action._createAdditionalComponentsView [171]: Creating additional ui components for UM3.
2018-11-14 17:30:23,683 - DEBUG - [MainThread] UM3NetworkPrinting.src.DiscoverUM3Action.startDiscovery [43]: Starting device discovery.
2018-11-14 17:30:23,754 - DEBUG - [MainThread] UM.Controller.setActiveStage [159]: Setting active stage to PrepareStage
2018-11-14 17:30:24,002 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [34]: Updating NozzleModel.
2018-11-14 17:30:24,094 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [352]: file:///C:/Program Files/Ultimaker Cura 3.6/resources/qml/SidebarHeader.qml:551:9: QML QQuickItem: Binding loop detected for property "width"
2018-11-14 17:30:24,129 - DEBUG - [MainThread] UM.Controller.setActiveView [92]: Setting active view to SolidView
2018-11-14 17:30:24,134 - DEBUG - [MainThread] ModelChecker.ModelChecker._createView [97]: Creating model checker view.
2018-11-14 17:30:24,145 - DEBUG - [MainThread] ModelChecker.ModelChecker._createView [106]: Model checker view created.
2018-11-14 17:30:24,147 - DEBUG - [MainThread] SliceInfoPlugin.SliceInfo._createDialog [82]: Creating dialog [MoreInfoWindow.qml]
2018-11-14 17:30:24,228 - DEBUG - [MainThread] cura.CuraApplication.run [741]: Booting Cura took 8.869371175765991 seconds
2018-11-14 17:30:24,565 - DEBUG - [MainThread] UM.Qt.QtRenderer._initialize [183]: Support for Vertex Array Objects: True
2018-11-14 17:30:24,575 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [99]: Initialized OpenGL subsystems.
2018-11-14 17:30:24,578 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [100]: OpenGL Version: 4.0.0 - Build 10.18.10.4358
2018-11-14 17:30:24,581 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [101]: OpenGL Vendor: Intel
2018-11-14 17:30:24,583 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [102]: OpenGL Renderer: Intel(R) HD Graphics 4000
2018-11-14 17:30:24,586 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [55]: Loading shader file [C:Program FilesUltimaker Cura 3.6resourcesshadersdefault.shader]...
2018-11-14 17:30:24,595 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [55]: Loading shader file [C:Program FilesUltimaker Cura 3.6resourcesshadersselection.shader]...
2018-11-14 17:30:24,601 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [55]: Loading shader file [C:Program FilesUltimaker Cura 3.6resourcesshadersdefault.shader]...
2018-11-14 17:30:24,607 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [55]: Loading shader file [C:Program FilesUltimaker Cura 3.6resourcesshaderscomposite.shader]...
2018-11-14 17:30:24,616 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [55]: Loading shader file [C:Program FilesUltimaker Cura 3.6resourcesshadersoverhang.shader]...
2018-11-14 17:30:24,624 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [55]: Loading shader file [C:Program FilesUltimaker Cura 3.6resourcesshadersstriped.shader]...
2018-11-14 17:30:24,633 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [55]: Loading shader file [C:Program FilesUltimaker Cura 3.6resourcesshaderstransparent_object.shader]...
2018-11-14 17:30:24,639 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [55]: Loading shader file [C:Program FilesUltimaker Cura 3.6resourcesshadersstriped.shader]...
2018-11-14 17:30:24,648 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [55]: Loading shader file [C:Program FilesUltimaker Cura 3.6resourcesshadersplatform.shader]...
2018-11-14 17:30:34,240 - DEBUG - [MainThread] cura.AutoSave._onTimeout [48]: Autosaving preferences, instances and profiles
2018-11-14 17:30:38,963 - DEBUG - [Thread-10] UM.Backend.Backend._backendLog [94]: [Backend] [ERROR] Could not connect to the given address
2018-11-14 17:30:38,972 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onBackendQuit [809]: Backend quit with return code 0. Resetting process and socket.
2018-11-14 17:31:01,060 - INFO - [MainThread] UserAgreement.UserAgreement.didAgree [35]: User agreed to the user agreement
2018-11-14 17:31:03,453 - DEBUG - [MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [54]: Loading container ultimaker3
2018-11-14 17:31:03,831 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [371]: Container [ultimaker3] added.
2018-11-14 17:31:03,860 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [371]: Container [Ultimaker 3_settings] added.
2018-11-14 17:31:03,862 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [371]: Container [Ultimaker 3_user] added.
2018-11-14 17:31:03,863 - DEBUG - [MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [54]: Loading container ultimaker3_aa04
2018-11-14 17:31:03,870 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [371]: Container [ultimaker3_aa04] added.
2018-11-14 17:31:03,870 - DEBUG - [MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [54]: Loading container ultimaker3_extruder_left
2018-11-14 17:31:03,872 - WARNING - [MainThread] UM.Settings.DefinitionContainer._preprocessParsedJson [267]: Unable to override setting machine_nozzle_head_distance
2018-11-14 17:31:03,877 - WARNING - [MainThread] UM.Settings.SettingDefinition._deserialize_dict [541]: Unrecognised property setttable_globally in setting machine_extruder_cooling_fan_number
2018-11-14 17:31:03,886 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [371]: Container [ultimaker3_extruder_left] added.
2018-11-14 17:31:03,886 - DEBUG - [MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [54]: Loading container generic_pla
2018-11-14 17:31:03,906 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [371]: Container [generic_pla_ultimaker2_plus] added.
2018-11-14 17:31:03,906 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [371]: Container [generic_pla_ultimaker2_plus_0.25_mm] added.
2018-11-14 17:31:03,906 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [371]: Container [generic_pla_ultimaker2_plus_0.4_mm] added.
2018-11-14 17:31:03,915 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [371]: Container [generic_pla_ultimaker2_plus_0.6_mm] added.
2018-11-14 17:31:03,915 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [371]: Container [generic_pla_ultimaker2_plus_0.8_mm] added.
2018-11-14 17:31:03,915 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [371]: Container [generic_pla_ultimaker2_extended_plus] added.
2018-11-14 17:31:03,923 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [371]: Container [generic_pla_ultimaker2_extended_plus_0.25_mm] added.
2018-11-14 17:31:03,925 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [371]: Container [generic_pla_ultimaker2_extended_plus_0.4_mm] added.
2018-11-14 17:31:03,925 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [371]: Container [generic_pla_ultimaker2_extended_plus_0.6_mm] added.
2018-11-14 17:31:03,925 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [371]: Container [generic_pla_ultimaker2_extended_plus_0.8_mm] added.
2018-11-14 17:31:03,933 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [371]: Container [generic_pla_ultimaker2] added.
2018-11-14 17:31:03,935 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [371]: Container [generic_pla_ultimaker2_go] added.
2018-11-14 17:31:03,935 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [371]: Container [generic_pla_ultimaker2_extended] added.
2018-11-14 17:31:03,935 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [371]: Container [generic_pla_ultimaker_original] added.
2018-11-14 17:31:03,943 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [371]: Container [generic_pla_ultimaker3] added.
2018-11-14 17:31:03,943 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [371]: Container [generic_pla_ultimaker3_BB_0.4] added.
2018-11-14 17:31:03,948 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [371]: Container [generic_pla_ultimaker3_BB_0.8] added.
2018-11-14 17:31:03,948 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [371]: Container [generic_pla_ultimaker3_AA_0.25] added.
2018-11-14 17:31:03,953 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [371]: Container [generic_pla_ultimaker3_AA_0.4] added.
2018-11-14 17:31:03,955 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [371]: Container [generic_pla_ultimaker3_AA_0.8] added.
2018-11-14 17:31:03,955 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [371]: Container [generic_pla_ultimaker3_extended] added.
2018-11-14 17:31:03,955 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [371]: Container [generic_pla_ultimaker3_extended_BB_0.4] added.
2018-11-14 17:31:03,964 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [371]: Container [generic_pla_ultimaker3_extended_BB_0.8] added.
2018-11-14 17:31:03,967 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [371]: Container [generic_pla_ultimaker3_extended_AA_0.25] added.
2018-11-14 17:31:03,969 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [371]: Container [generic_pla_ultimaker3_extended_AA_0.4] added.
2018-11-14 17:31:03,972 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [371]: Container [generic_pla_ultimaker3_extended_AA_0.8] added.
2018-11-14 17:31:03,974 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [371]: Container [generic_pla_ultimaker_s5] added.
2018-11-14 17:31:03,977 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [371]: Container [generic_pla_ultimaker_s5_BB_0.4] added.
2018-11-14 17:31:03,977 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [371]: Container [generic_pla_ultimaker_s5_BB_0.8] added.
2018-11-14 17:31:03,977 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [371]: Container [generic_pla_ultimaker_s5_CC_0.6] added.
2018-11-14 17:31:03,984 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [371]: Container [generic_pla_ultimaker_s5_AA_0.25] added.
2018-11-14 17:31:03,986 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [371]: Container [generic_pla_ultimaker_s5_AA_0.4] added.
2018-11-14 17:31:03,986 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [371]: Container [generic_pla_ultimaker_s5_AA_0.8] added.
2018-11-14 17:31:03,986 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [371]: Container [generic_pla_imade3d_jellybox] added.
2018-11-14 17:31:03,994 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [371]: Container [generic_pla_imade3d_jellybox_0.4_mm] added.
2018-11-14 17:31:03,996 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [371]: Container [generic_pla_imade3d_jellybox_0.4_mm_2-fans] added.
2018-11-14 17:31:03,996 - WARNING - [MainThread] UM.Settings.ContainerRegistry.addContainer [360]: Container with ID generic_pla_ultimaker3_AA_0.4 was already added.
2018-11-14 17:31:04,032 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [371]: Container [ultimaker3_extruder_left #2_settings] added.
2018-11-14 17:31:04,036 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [371]: Container [ultimaker3_extruder_left #2_user] added.
2018-11-14 17:31:04,036 - INFO - [MainThread] cura.Settings.GlobalStack.addExtruder [90]: Extruder[ultimaker3_extruder_left #2] added to [Ultimaker 3] at position [0]
2018-11-14 17:31:04,036 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [371]: Container [ultimaker3_extruder_left #2] added.
2018-11-14 17:31:04,042 - DEBUG - [MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [54]: Loading container ultimaker3_extruder_right
2018-11-14 17:31:04,046 - WARNING - [MainThread] UM.Settings.DefinitionContainer._preprocessParsedJson [267]: Unable to override setting machine_nozzle_head_distance
2018-11-14 17:31:04,046 - WARNING - [MainThread] UM.Settings.SettingDefinition._deserialize_dict [541]: Unrecognised property setttable_globally in setting machine_extruder_cooling_fan_number
2018-11-14 17:31:04,056 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [371]: Container [ultimaker3_extruder_right] added.
2018-11-14 17:31:04,090 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [371]: Container [ultimaker3_extruder_right #2_settings] added.
2018-11-14 17:31:04,094 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [371]: Container [ultimaker3_extruder_right #2_user] added.
2018-11-14 17:31:04,096 - INFO - [MainThread] cura.Settings.GlobalStack.addExtruder [90]: Extruder[ultimaker3_extruder_right #2] added to [Ultimaker 3] at position [1]
2018-11-14 17:31:04,099 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [371]: Container [ultimaker3_extruder_right #2] added.
2018-11-14 17:31:04,099 - WARNING - [MainThread] UM.Settings.ContainerRegistry.addContainer [360]: Container with ID ultimaker3_extruder_right #2 was already added.
2018-11-14 17:31:04,104 - WARNING - [MainThread] UM.Settings.ContainerRegistry.addContainer [360]: Container with ID ultimaker3_extruder_left #2 was already added.
2018-11-14 17:31:04,106 - DEBUG - [MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [54]: Loading container um3_global_Normal_Quality
2018-11-14 17:31:04,106 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [371]: Container [um3_global_Normal_Quality] added.
2018-11-14 17:31:04,113 - DEBUG - [MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [54]: Loading container um3_aa0.4_PLA_Normal_Quality
2018-11-14 17:31:04,117 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [371]: Container [um3_aa0.4_PLA_Normal_Quality] added.
2018-11-14 17:31:04,117 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [371]: Container [Ultimaker 3] added.
2018-11-14 17:31:04,125 - INFO - [MainThread] cura.MachineActionManager.addDefaultMachineActions [72]: Default machine actions added for machine definition [ultimaker3]
2018-11-14 17:31:04,450 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [15]: Updating CustomQualityProfilesDropDownMenuModel.
2018-11-14 17:31:04,452 - INFO - [MainThread] cura.Machines.QualityManager.getQualityChangesGroups [179]: Cannot find node for machine def [ultimaker3] in QualityChanges lookup table
2018-11-14 17:31:04,455 - DEBUG - [MainThread] cura.Machines.Models.QualityProfilesDropDownMenuModel._update [50]: Updating QualityProfilesDropDownMenuModel.
2018-11-14 17:31:04,457 - DEBUG - [MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [54]: Loading container um3_global_Draft_Quality
2018-11-14 17:31:04,462 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [371]: Container [um3_global_Draft_Quality] added.
2018-11-14 17:31:04,494 - DEBUG - [MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [54]: Loading container um3_global_Fast_Quality
2018-11-14 17:31:04,499 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [371]: Container [um3_global_Fast_Quality] added.
2018-11-14 17:31:04,532 - DEBUG - [MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [54]: Loading container um3_global_High_Quality
2018-11-14 17:31:04,537 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [371]: Container [um3_global_High_Quality] added.
2018-11-14 17:31:04,572 - DEBUG - [MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [54]: Loading container um3_global_Superdraft_Quality
2018-11-14 17:31:04,577 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [371]: Container [um3_global_Superdraft_Quality] added.
2018-11-14 17:31:04,611 - DEBUG - [MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [54]: Loading container um3_global_Verydraft_Quality
2018-11-14 17:31:04,616 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [371]: Container [um3_global_Verydraft_Quality] added.
2018-11-14 17:31:04,700 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:04,703 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:04,709 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:04,733 - DEBUG - [MainThread] cura.Machines.Models.BuildPlateModel._update [33]: Updating BuildPlateModel.
2018-11-14 17:31:04,736 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:04,740 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:04,745 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:04,770 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [34]: Updating NozzleModel.
2018-11-14 17:31:04,775 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [15]: Updating CustomQualityProfilesDropDownMenuModel.
2018-11-14 17:31:04,777 - INFO - [MainThread] cura.Machines.QualityManager.getQualityChangesGroups [179]: Cannot find node for machine def [ultimaker3] in QualityChanges lookup table
2018-11-14 17:31:04,780 - DEBUG - [MainThread] cura.Machines.Models.QualityProfilesDropDownMenuModel._update [50]: Updating QualityProfilesDropDownMenuModel.
2018-11-14 17:31:04,896 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [15]: Updating CustomQualityProfilesDropDownMenuModel.
2018-11-14 17:31:04,898 - INFO - [MainThread] cura.Machines.QualityManager.getQualityChangesGroups [179]: Cannot find node for machine def [ultimaker3] in QualityChanges lookup table
2018-11-14 17:31:04,903 - DEBUG - [MainThread] cura.Machines.Models.QualityProfilesDropDownMenuModel._update [50]: Updating QualityProfilesDropDownMenuModel.
2018-11-14 17:31:05,099 - WARNING - [MainThread] cura.Settings.GlobalStack.addExtruder [86]: Extruder [ultimaker3_extruder_left #2] has already been added to this stack [Ultimaker 3]
2018-11-14 17:31:05,112 - WARNING - [MainThread] cura.Settings.ExtruderManager.registerExtruder [168]: Extruder [ultimaker3_extruder_left #2] has already been registered on machine [Ultimaker 3], not doing anything
2018-11-14 17:31:05,124 - WARNING - [MainThread] cura.Settings.GlobalStack.addExtruder [86]: Extruder [ultimaker3_extruder_right #2] has already been added to this stack [Ultimaker 3]
2018-11-14 17:31:05,140 - WARNING - [MainThread] cura.Settings.ExtruderManager.registerExtruder [168]: Extruder [ultimaker3_extruder_right #2] has already been registered on machine [Ultimaker 3], not doing anything
2018-11-14 17:31:06,028 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:06,031 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:06,037 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:06,061 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:06,063 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:06,068 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [15]: Updating CustomQualityProfilesDropDownMenuModel.
2018-11-14 17:31:06,070 - INFO - [MainThread] cura.Machines.QualityManager.getQualityChangesGroups [179]: Cannot find node for machine def [ultimaker3] in QualityChanges lookup table
2018-11-14 17:31:06,073 - DEBUG - [MainThread] cura.Machines.Models.QualityProfilesDropDownMenuModel._update [50]: Updating QualityProfilesDropDownMenuModel.
2018-11-14 17:31:06,083 - INFO - [MainThread] cura.Settings.MachineManager._initMachineState [342]: Machine 'Ultimaker 3' quality set to 'normal'
2018-11-14 17:31:06,139 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [15]: Updating CustomQualityProfilesDropDownMenuModel.
2018-11-14 17:31:06,142 - INFO - [MainThread] cura.Machines.QualityManager.getQualityChangesGroups [179]: Cannot find node for machine def [ultimaker3] in QualityChanges lookup table
2018-11-14 17:31:06,144 - DEBUG - [MainThread] cura.Machines.Models.QualityProfilesDropDownMenuModel._update [50]: Updating QualityProfilesDropDownMenuModel.
2018-11-14 17:31:06,197 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:06,200 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:06,205 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:06,230 - DEBUG - [MainThread] cura.Machines.Models.BuildPlateModel._update [33]: Updating BuildPlateModel.
2018-11-14 17:31:06,233 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:06,236 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:06,241 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:06,265 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [34]: Updating NozzleModel.
2018-11-14 17:31:06,272 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [15]: Updating CustomQualityProfilesDropDownMenuModel.
2018-11-14 17:31:06,274 - INFO - [MainThread] cura.Machines.QualityManager.getQualityChangesGroups [179]: Cannot find node for machine def [ultimaker3] in QualityChanges lookup table
2018-11-14 17:31:06,277 - DEBUG - [MainThread] cura.Machines.Models.QualityProfilesDropDownMenuModel._update [50]: Updating QualityProfilesDropDownMenuModel.
2018-11-14 17:31:06,351 - DEBUG - [MainThread] UM3NetworkPrinting.src.DiscoverUM3Action.reset [51]: Reset the list of found devices.
2018-11-14 17:31:06,511 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [34]: Updating NozzleModel.
2018-11-14 17:31:06,515 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:06,519 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:06,523 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:06,531 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:06,538 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:06,542 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:06,568 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [34]: Updating NozzleModel.
2018-11-14 17:31:06,572 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:06,576 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:06,580 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:06,589 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:06,598 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:06,603 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:06,635 - DEBUG - [MainThread] cura.Machines.MachineErrorChecker._rescheduleCheck [129]: New error check scheduled.
2018-11-14 17:31:06,698 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:06,702 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:06,708 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:06,734 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:06,773 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:06,780 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:06,784 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:06,788 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:06,793 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:06,819 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:06,844 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:06,850 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:06,854 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:06,857 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:06,863 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:06,889 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:06,915 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:06,921 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:06,928 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:06,931 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:06,937 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:06,962 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:06,990 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:06,996 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:06,999 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:07,001 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:07,007 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:07,031 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:07,056 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:07,062 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:07,100 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:07,126 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:07,132 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:07,135 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:07,161 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:07,167 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:07,170 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:07,196 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:07,202 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:07,205 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:07,235 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:07,241 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:07,245 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:07,270 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:07,277 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:07,282 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:07,308 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:07,314 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:07,318 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:07,321 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:07,327 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:07,352 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:07,378 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:07,384 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:07,387 - INFO - [Thread-1] FirmwareUpdateChecker.FirmwareUpdateCheckerJob.run [92]: You have a(n) Ultimaker 3 in the printer list. Let's check the firmware!
2018-11-14 17:31:07,417 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [55]: Loading shader file [C:Program FilesUltimaker Cura 3.6resourcesshadersdefault.shader]...
2018-11-14 17:31:07,423 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [55]: Loading shader file [C:Program FilesUltimaker Cura 3.6resourcesshadersgrid.shader]...
2018-11-14 17:31:07,489 - DEBUG - [MainThread] UM.Mesh.MeshData.approximateConvexHull [401]: approximateConvexHull(target_count=1024) Calculating 3D convex hull took 0.021989107131958008 seconds. 132 input vertices. 132 output vertices.
2018-11-14 17:31:07,502 - INFO - [MainThread] cura.Machines.MaterialManager._updateMaps [279]: Updating material lookup data ...
2018-11-14 17:31:07,570 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:07,573 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:07,576 - INFO - [MainThread] cura.Settings.MachineManager._updateQualityWithMaterial [1226]: Updating quality/quality_changes due to material change
2018-11-14 17:31:07,581 - DEBUG - [MainThread] cura.Settings.MachineManager._updateQualityWithMaterial [1233]: Current quality type = [normal]
2018-11-14 17:31:07,584 - INFO - [MainThread] cura.Settings.MachineManager._updateQualityWithMaterial [1247]: Current available quality type [normal] is available, applying changes.
2018-11-14 17:31:07,588 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [15]: Updating CustomQualityProfilesDropDownMenuModel.
2018-11-14 17:31:07,590 - INFO - [MainThread] cura.Machines.QualityManager.getQualityChangesGroups [179]: Cannot find node for machine def [ultimaker3] in QualityChanges lookup table
2018-11-14 17:31:07,593 - DEBUG - [MainThread] cura.Machines.Models.QualityProfilesDropDownMenuModel._update [50]: Updating QualityProfilesDropDownMenuModel.
2018-11-14 17:31:07,603 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:07,606 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:07,612 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:07,636 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:07,640 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:07,646 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:07,670 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:07,673 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:07,679 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:07,709 - WARNING - [Thread-1] FirmwareUpdateChecker.FirmwareUpdateCheckerJob.getUrlResponse [47]: Could not reach 'http://software.ultimaker.com/releases/firmware/9066/stable/version.txt', if this URL is old, consider removal.
2018-11-14 17:31:07,710 - INFO - [Thread-1] FirmwareUpdateChecker.FirmwareUpdateCheckerJob.run [103]: Reading firmware version of Ultimaker 3: checked = 0.0.0 - latest = 4.3.3-20180529.0
2018-11-14 17:31:07,958 - DEBUG - [MainThread] cura.Machines.QualityManager.initialize [136]: Lookup tables updated.
2018-11-14 17:31:07,961 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [15]: Updating CustomQualityProfilesDropDownMenuModel.
2018-11-14 17:31:07,963 - INFO - [MainThread] cura.Machines.QualityManager.getQualityChangesGroups [179]: Cannot find node for machine def [ultimaker3] in QualityChanges lookup table
2018-11-14 17:31:07,966 - DEBUG - [MainThread] cura.Machines.Models.QualityProfilesDropDownMenuModel._update [50]: Updating QualityProfilesDropDownMenuModel.
2018-11-14 17:31:09,586 - DEBUG - [MainThread] cura.Machines.MachineErrorChecker._checkStack [133]: Need to check for errors again. Discard the current progress and reschedule a check.
2018-11-14 17:31:09,816 - DEBUG - [MainThread] cura.Machines.MachineErrorChecker._rescheduleCheck [129]: New error check scheduled.
2018-11-14 17:31:11,316 - INFO - [MainThread] cura.Machines.MachineErrorChecker._setResult [181]: Error check finished, result = False, time = 1.5s
2018-11-14 17:31:13,559 - DEBUG - [MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [54]: Loading container um3_aa0.4_PLA_Fast_Print
2018-11-14 17:31:13,565 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [371]: Container [um3_aa0.4_PLA_Fast_Print] added.
2018-11-14 17:31:13,569 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [15]: Updating CustomQualityProfilesDropDownMenuModel.
2018-11-14 17:31:13,571 - INFO - [MainThread] cura.Machines.QualityManager.getQualityChangesGroups [179]: Cannot find node for machine def [ultimaker3] in QualityChanges lookup table
2018-11-14 17:31:13,574 - DEBUG - [MainThread] cura.Machines.Models.QualityProfilesDropDownMenuModel._update [50]: Updating QualityProfilesDropDownMenuModel.
2018-11-14 17:31:13,713 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:13,716 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:13,722 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:13,746 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:13,771 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:13,777 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:13,780 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:13,805 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:13,811 - DEBUG - [MainThread] cura.Machines.MaterialManager.getAvailableMaterials [356]: Exclude materials generic_petg, generic_hips for machine ultimaker3
2018-11-14 17:31:13,825 - DEBUG - [MainThread] cura.Machines.MachineErrorChecker._rescheduleCheck [129]: New error check scheduled.
2018-11-14 17:31:13,999 - DEBUG - [MainThread] cura.Machines.QualityManager.initialize [136]: Lookup tables updated.
2018-11-14 17:31:14,001 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [15]: Updating CustomQualityProfilesDropDownMenuModel.
2018-11-14 17:31:14,004 - INFO - [MainThread] cura.Machines.QualityManager.getQualityChangesGroups [179]: Cannot find node for machine def [ultimaker3] in QualityChanges lookup table
2018-11-14 17:31:14,006 - DEBUG - [MainThread] cura.Machines.Models.QualityProfilesDropDownMenuModel._update [50]: Updating QualityProfilesDropDownMenuModel.
2018-11-14 17:31:16,143 - INFO - [MainThread] cura.Machines.MachineErrorChecker._setResult [181]: Error check finished, result = False, time = 2.3s
2018-11-14 17:31:25,433 - DEBUG - [MainThread] cura.AutoSave._onTimeout [48]: Autosaving preferences, instances and profiles
2018-11-14 17:31:26,335 - DEBUG - [Thread-4] UM.Mesh.MeshData.calculateNormalsFromVertices [444]: Calculating normals took 0.0010020732879638672 seconds
2018-11-14 17:31:26,337 - DEBUG - [Thread-4] STLReader.STLReader._read [89]: Loaded a mesh with 30720 vertices
2018-11-14 17:31:26,369 - DEBUG - [Thread-4] UM.Mesh.MeshData.approximateConvexHull [401]: approximateConvexHull(target_count=1024) Calculating 3D convex hull took 0.026980876922607422 seconds. 50 input vertices. 50 output vertices.
2018-11-14 17:31:26,390 - DEBUG - [Thread-4] UM.FileHandler.ReadFileJob.run [65]: Loading file took 0.1 seconds
2018-11-14 17:31:26,403 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [371]: Container [per_object_stack_2291228280760] added.
2018-11-14 17:31:26,426 - DEBUG - [MainThread] UM.Mesh.MeshData.approximateConvexHull [401]: approximateConvexHull(target_count=1024) Calculating 3D convex hull took 0.018985986709594727 seconds. 50 input vertices. 50 output vertices.
2018-11-14 17:31:26,471 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [55]: Loading shader file [C:Program FilesUltimaker Cura 3.6resourcesshaderstransparent_object.shader]...
2018-11-14 17:31:34,803 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [55]: Loading shader file [C:Program FilesUltimaker Cura 3.6resourcesshaderstoolhandle.shader]...
2018-11-14 17:31:35,913 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [55]: Loading shader file [C:Program FilesUltimaker Cura 3.6resourcesshaderstoolhandle.shader]...
2018-11-14 17:31:40,333 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [227]: Starting to slice...
2018-11-14 17:31:40,333 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [244]: Going to slice build plate [0]!
2018-11-14 17:31:40,338 - DEBUG - [MainThread] UM.Backend.Backend._createSocket [218]: Previous socket existed. Closing that first.
2018-11-14 17:31:40,487 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [178]: Socket state changed to Listening
2018-11-14 17:31:41,123 - INFO - [MainThread] UM.Backend.Backend.startEngine [74]: Started engine process: C:Program FilesUltimaker Cura 3.6CuraEngine.exe
2018-11-14 17:31:41,235 - DEBUG - [MainThread] UM.Backend.Backend._backendLog [94]: [Backend] Calling engine with: ['C:\Program Files\Ultimaker Cura 3.6\CuraEngine.exe', 'connect', '127.0.0.1:49674', '']
2018-11-14 17:31:41,240 - DEBUG - [Thread-13] UM.Backend.Backend._backendLog [94]: [Backend]
2018-11-14 17:31:41,249 - DEBUG - [Thread-13] UM.Backend.Backend._backendLog [94]: [Backend] Cura_SteamEngine version 3.6.0
2018-11-14 17:31:41,256 - DEBUG - [Thread-13] UM.Backend.Backend._backendLog [94]: [Backend] Copyright (C) 2018 Ultimaker
2018-11-14 17:31:41,259 - DEBUG - [Thread-13] UM.Backend.Backend._backendLog [94]: [Backend]
2018-11-14 17:31:41,261 - DEBUG - [Thread-13] UM.Backend.Backend._backendLog [94]: [Backend] This program is free software: you can redistribute it and/or modify
2018-11-14 17:31:41,265 - DEBUG - [Thread-13] UM.Backend.Backend._backendLog [94]: [Backend] it under the terms of the GNU Affero General Public License as published by
2018-11-14 17:31:41,267 - DEBUG - [Thread-13] UM.Backend.Backend._backendLog [94]: [Backend] the Free Software Foundation, either version 3 of the License, or
2018-11-14 17:31:41,270 - DEBUG - [Thread-13] UM.Backend.Backend._backendLog [94]: [Backend] (at your option) any later version.
2018-11-14 17:31:41,273 - DEBUG - [Thread-13] UM.Backend.Backend._backendLog [94]: [Backend]
2018-11-14 17:31:41,275 - DEBUG - [Thread-13] UM.Backend.Backend._backendLog [94]: [Backend] This program is distributed in the hope that it will be useful,
2018-11-14 17:31:41,278 - DEBUG - [Thread-13] UM.Backend.Backend._backendLog [94]: [Backend] but WITHOUT ANY WARRANTY; without even the implied warranty of
2018-11-14 17:31:41,280 - DEBUG - [Thread-13] UM.Backend.Backend._backendLog [94]: [Backend] MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
2018-11-14 17:31:41,283 - DEBUG - [Thread-13] UM.Backend.Backend._backendLog [94]: [Backend] GNU Affero General Public License for more details.
2018-11-14 17:31:41,286 - DEBUG - [Thread-13] UM.Backend.Backend._backendLog [94]: [Backend]
2018-11-14 17:31:41,289 - DEBUG - [Thread-13] UM.Backend.Backend._backendLog [94]: [Backend] You should have received a copy of the GNU Affero General Public License
2018-11-14 17:31:41,291 - DEBUG - [Thread-13] UM.Backend.Backend._backendLog [94]: [Backend] along with this program. If not, see http://www.gnu.org/licenses/.
2018-11-14 17:31:41,980 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onStartSliceCompleted [430]: Sending slice message took 1.6471567153930664 seconds
2018-11-14 17:31:42,793 - DEBUG - [MainThread] cura.AutoSave._onTimeout [48]: Autosaving preferences, instances and profiles
2018-11-14 17:32:02,157 - DEBUG - [Thread-13] UM.Backend.Backend._backendLog [94]: [Backend] [ERROR] Could not connect to the given address
2018-11-14 17:32:02,205 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onBackendQuit [809]: Backend quit with return code 0. Resetting process and socket.

I must mention that the file which I tried to slice was sliced and printed many times, in older versions of cura (3.4 and earlier).
I have the windows 10 and a 64 bits CPU.

Thank you all in advance.

I would really appreciate any help :)

P.S. I keep thinking that could be a problem with a deleted drive by the windows update, but please let me know your suggestions.

[smartavionics]

Please zip the project file and attach to this issue so we can look at the settings. Thanks.

[danielassr]

Thank you @smartavionics for the fast reply :)
The project file is in attachment.
Thank you!

UM3_Assembly 3.zip

[smartavionics]

Thanks for the file, unfortunately, that isn't the project file, it only contains the model. Please do File -> Save.

[danielassr]

Oh sorry, the right file is this one:

UM3_Assembly 3.zip

[smartavionics]

Thanks for that. Well, I loaded the project into my version of Cura (which is a bit like 3.6.0) and it sliced OK. Maybe there has been a recent fix? is it worth you trying 3.6?

[danielassr]

The only thing that happened was the windows update. After that, whatever the version, the unable to slice was always appearing. Now I have the 3.6 version. I can't imagine what the problem might be since I previously sliced and printed that.

[danielassr]

This is what it is presented in my Cura

[smartavionics]

Ah, that screenshot shows that it is actually in the process of slicing. Perhaps the slicing engine has crashed. Can you find cura.log (Help -> Show Configuration Folder), zip it up and attach. Thanks.

[danielassr]

Hmm, I hope is because of that. As requested, the file:

cura.zip

[smartavionics]

Your log contains lines like this:
2018-11-15 11:46:35,577 - DEBUG - [Thread-37] UM.Backend.Backend._backendLog [94]: [Backend] [ERROR] Could not connect to the given address 2018-11-15 11:46:35,655 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onBackendQuit [809]: Backend quit with return code 0. Resetting process and socket .

It appears to be having a problem communicating with the back end. Do you have a firewall active? If so, does it work OK if you disable the firewall?

[danielassr]

Even with the firewall disabled, the problem remains and it does not work :|

[smartavionics]

Sorry, I can't help more but I don't use Windows - someone else will have to look at this. Good luck!

[danielassr]

Thank you so much for all the time @smartavionics!! :)

[diegopradogesto]

For you, @danielassr the problem seems to be the firewall. I think it's the exact same issue as #4223 or #3334 or #3118. All of them related with the libArcus port is not open. Please take a look at the proposed solutions.