Tasmota: Xiaomi Desk Lamp support

Created on 9 Jan 2019 · 7Comments · Source: arendst/Tasmota

Hi,

I've a Xiaomi/Yeelight Smart Desk lamp (https://www.mi.com/global/smartlamp/). It would be nice, if Tasmota could support it.

It has 2 opensource firmware already:
https://github.com/fvollmer/xiomi-desk-lamp-open-firmware
https://github.com/Torxgewinde/Desk-Lamp-Alternative-Firmware

enhancement

Source

dh-harald

Most helpful comment

Yes, the rotary switch functionality is not available in Tasmota.

In this case, I'll try to implement it. Fingers crossed :)

dh-harald on 9 Jan 2019

👍2 🎉1

All 7 comments

Nice complete product.

But does it provide enough light? 300lm is not much for a desk lamp...

arendst on 9 Jan 2019

Please, try Tasmota with the generic module configuration and set the gpios according to this hardware to test. You will need to find out which gpios of the esp8266 are connected and to what. Thanks for share. Keep up posted.

ascillato2 on 9 Jan 2019

Hi,

Based on the existing firmwares, I've set the following:
D4 GPIO2 -> Button1 (17)
D2 GPIO4 -> PWM1 (37)
D1 GPIO5 -> PWM2 (38)

With this settings, I could turn on and off the lamp via pressing the button, and I could set the brightness and the color temperature on the web frontend... (toggle button worked as well)

Unfortunately (I think), the rotary switch needs extra work from your side...

dh-harald on 9 Jan 2019

Yes, the rotary switch functionality is not available in Tasmota.

arendst on 9 Jan 2019