Tasmota: Upgraded Sonoff Basic from 6.1.1 to 6.2.1 and now LED is blinking at 1/s

[belidzs]

Make sure these boxes are checked [x] before submitting your issue - Thank you!

• [x] Searched the problem in issues (https://github.com/arendst/Sonoff-Tasmota/issues)
• [x] Searched the problem in the wiki (https://github.com/arendst/Sonoff-Tasmota/wiki/Troubleshooting)
• [x] Searched the problem in the forum (https://groups.google.com/d/forum/sonoffusers)
• [x] Searched the problem in the chat (https://discord.gg/Ks2Kzd4)
• [x] Hardware used : Sonoff Basic
• [x] Provide the output of command status 0 :

Can't connect to the device anymore

(Please, remember to close the issue when the problem has been addressed)

I have tried to flash a Sonoff Basic through OTA when something went wrong. First I have flashed the minimal image, which was successful. After that, I tried to continue the process by flashing the normal image using the same method, but after the reboot the LED blinked at 1/s rate

Since I couldn't connect to the device using wifi anymore, I've used esptool to erase and rewrite the flash with the precompiled sonoff.bin and sonoff-classic.bin from the GitHub releases section (v6.2.1). Neither did help. Two other devices (an S20 and a POW) flashed perfectly using the OTA method using the same images.

As a hail mary I've reflashed with the serial converter to v6.1.1 and now it's working again. I don't know how to get debug data since I was cut off from the device completely on v6.2.1

[ascillato]

Hi

Sonoff.bin v6.2.1, from release had a compilation issue. Please try to download it again or use the precompiled bins from http://thehackbox.org/tasmota/

Thanks

For more information issue #3678

[belidzs]

I can confirm using these binaries has indeed solved my problem

[belidzs]

Thank you!