Tasmota: HA Autodiscovery misses pressure Unit Of Measure

[dcandi]

Pressure sensor is reported without unit of measure in the MQTT HA discovery packet.
HA shows the entity history as a bar, like for a switch, instead of a graph, like for temperature sensors.

Versions
HW: nodeMCU board with BME280 sensor
Tasmota: 6.4.0 release binary (sonoff.bin)
HA: 0.84.2

Status 0 output

23:00:36 CMD: status 0
23:00:37 MQT: sonoff/stat/STATUS = {"Status":{"Module":18,"FriendlyName":["Sonoff"],"Topic":"sonoff","ButtonTopic":"0","Power":1,"PowerOnState":3,"LedState":1,"SaveData":1,"SaveState":1,"SwitchTopic":"0","SwitchMode":[0,0,0,0,0,0,0,0],"ButtonRetain":0,"SwitchRetain":0,"SensorRetain":0,"PowerRetain":0}}
23:00:37 MQT: sonoff/stat/STATUS1 = {"StatusPRM":{"Baudrate":115200,"GroupTopic":"sonoffs","OtaUrl":"http://thehackbox.org/tasmota/release/sonoff.bin","RestartReason":"External System","Uptime":"0T00:22:40","StartupUTC":"2018-12-18T21:37:57","Sleep":50,"BootCount":10,"SaveCount":70,"SaveAddress":"F6000"}}
23:00:37 MQT: sonoff/stat/STATUS2 = {"StatusFWR":{"Version":"6.4.0(sonoff)","BuildDateTime":"2018-12-16T14:31:02","Boot":31,"Core":"2_4_2","SDK":"2.2.1(cfd48f3)"}}
23:00:37 MQT: sonoff/stat/STATUS3 = {"StatusLOG":{"SerialLog":2,"WebLog":2,"SysLog":0,"LogHost":"","LogPort":514,"SSId":["candi-fi",""],"TelePeriod":300,"SetOption":["000A8009","558180C0","00000220"]}}
23:00:37 MQT: sonoff/stat/STATUS4 = {"StatusMEM":{"ProgramSize":521,"Free":480,"Heap":16,"ProgramFlashSize":1024,"FlashSize":4096,"FlashChipId":"1640C8","FlashMode":3,"Features":["00000809","0FDAE794","000383A0","23B617CE","00003BC0"]}}
23:00:37 MQT: sonoff/stat/STATUS5 = {"StatusNET":{"Hostname":"sonoff-1901","IPAddress":"192.168.1.238","Gateway":"192.168.1.1","Subnetmask":"255.255.255.0","DNSServer":"192.168.1.1","Mac":"5C:CF:7F:01:67:6D","Webserver":2,"WifiConfig":4}}
23:00:37 MQT: sonoff/stat/STATUS6 = {"StatusMQT":{"MqttHost":"192.168.1.65","MqttPort":1883,"MqttClientMask":"DVES_%06X","MqttClient":"DVES_01676D","MqttUser":"DVES_USER","MqttType":1,"MAX_PACKET_SIZE":1000,"KEEPALIVE":15}}
23:00:37 MQT: sonoff/stat/STATUS7 = {"StatusTIM":{"UTC":"Tue Dec 18 22:00:37 2018","Local":"Tue Dec 18 23:00:37 2018","StartDST":"Sun Mar 25 02:00:00 2018","EndDST":"Sun Oct 28 03:00:00 2018","Timezone":"+01:00","Sunrise":"08:39","Sunset":"16:54"}}
23:00:37 MQT: sonoff/stat/STATUS10 = {"StatusSNS":{"Time":"2018-12-18T23:00:37","BME280":{"Temperature":19.8,"Humidity":27.6,"Pressure":990.3},"PressureUnit":"hPa","TempUnit":"C"}}
23:00:37 MQT: sonoff/stat/STATUS11 = {"StatusSTS":{"Time":"2018-12-18T23:00:37","Uptime":"0T00:22:40","Vcc":3.001,"SleepMode":"Dynamic","Sleep":0,"LoadAvg":999,"POWER":"ON","Dimmer":40,"Color":"0,50,102","HSBColor":"211,100,40","Channel":[0,19,40],"Scheme":0,"Width":1,"Fade":"OFF","Speed":1,"LedTable":"OFF","Wifi":{"AP":1,"SSId":"candi-fi","BSSId":"5C:E2:8C:A9:21:80","Channel":8,"RSSI":78}}}

To Reproduce
setup hass and tasmota for autodiscovery
Wire up a BME280 sensor to the module.
Configure module for D3 = I2C SDA and D4 = I2C SCL
setoption55 1
setoption19 1
reboot module

The pressure packet output is:

23:08:59 MQT: homeassistant/sensor/01676D_BME280_Pressure/config = {"name":"Sonoff BME280 Pressure","stat_t":"~SENSOR","avty_t":"~LWT","pl_avail":"Online","pl_not_avail":"Offline","val_tpl":"{{value_json['BME280'].Pressure}}","uniq_id":"01676D_BME280_Pressure","device":{"identifiers":["01676D"],"name":"Sonoff","model":"Generic","sw_version":"6.4.0(sonoff)","manufacturer":"Tasmota"}, "~":"sonoff/tele/"} (retained)

Expected behavior
Instead the packet shall contain "unit_of_meas":

23:08:59 MQT: homeassistant/sensor/01676D_BME280_Pressure/config = {"name":"Sonoff BME280 Pressure","stat_t":"~SENSOR","avty_t":"~LWT","pl_avail":"Online","pl_not_avail":"Offline","unit_of_meas":"hPa","val_tpl":"{{value_json['BME280'].Pressure}}","uniq_id":"01676D_BME280_Pressure","device":{"identifiers":["01676D"],"name":"Sonoff","model":"Generic","sw_version":"6.4.0(sonoff)","manufacturer":"Tasmota"}, "~":"sonoff/tele/"} (retained)

[ascillato2]

@emontnemery please, can you take care of this one? Thanks.

[dcandi]

@emontnemery I got it. Tomorrow I'll work out how to make a pull request.

[emontnemery]

@ascillato2 I've been discussing with @dcandi on discord, I think he's on it :)

[ascillato2]

PR #4692

[fluppie]

Cool, I wanted to report this bug as well :).

Normal behaviour:

Counters have the same issue, I report the CPM value of a Geiger counter:

And while where at it, the Lux values of a BH1750 as well:

[dcandi]

wow! did not know you could attach a geiger counter to WemosD1! Which hardware is that?
Btw if you don't use autodiscovery you can setup the sensor into configuration with their unit of measure and you get the graph.