Rpcs3: [Windows]Low FPS on Dragon Ball: Raging Blast

[BlackShadow]

RPCS3 Log:

https://pastebin.com/Sp5ysyRE

My Specs:

AMD FX 8350 4.40GHz - Eight Core
8GB DDR3 2400MHz RAM - GSkill
Sapphire Toxic R9 280X 384 Bit 3GB
Windows 10 PRO - x64

[Asinin3]

Low FPS isn't an issue if you wan't assistance you can ask on the EmuNewz forum or ask in discord.

[BlackShadow]

I also pasted my log maybe they can see something. Don't be so judgemental.

[Asinin3]

Don't bother the developers asking them to help you, they are busy. You are free to ask anywhere else, I'm offering you help and your not taking it. You will not be getting any assistance here.

[BlackShadow]

Ah, hello? I think you mistaken me here? If i wanted help i would go Discord right away. Also if you read any part of the issue, you'll see that i didn't even intended to use help word. I saw few errors on log so i decided to post it so i can help to developers. Christ.

[Asinin3]

https://github.com/RPCS3/rpcs3/blob/master/CONTRIBUTING.md
Edit: Those errors were most likely completely normal it is very common to have errors allover the log.

[BlackShadow]

The game works pretty fine on others, it's probaly related about my hardware. So let the devs check it out the post for a second.

[Asinin3]

The game is slow because your hardware is not the best and your settings may not be optimal, the developers can't do anything with this. Apart from say "change x setting" as the emulator improves so will your speed.

[BlackShadow]

My hardware may not be the best but its still good.

https://www.youtube.com/watch?v=1b2UmR_W9kk

This guy has

i7 6700K (4.0 Ghz)
GTX 960
8GB DDR4

280X better than GTX 960. 8350 may not better as 6700K but still catches up. For RAM's only difference is DDR Slot. For DDR3 and DDR4 theres no significant changes between those DDR's. Do you even know hardwares?

Edit: You could been say something like RPCS3 isn't optimized for AMD yet. But blaming to my hardware like they're not really that good, it's just funny.

[Asinin3]

You have an FX cpu which has low IPC (yes clock speed isn't the only thing that matters) it's very far off from a 6700k performance in RPCS3. GPU also barely affects RPCS3 as long as it supports Vulkan you will get decent performance as most of the work is being done on the CPU at the moment until things like the Vertex_rewrite are merged into the master which helps get the GPU usage up to around 40%

[Talkashie]

FX 8350 is a weak processor to be brutally honest. It hasn't aged well.

[BlackShadow]

I'm not saying like FX-8350 is the best one in the market. But for RPCS3 is should be enough when they optimized it.

[slx7R4GDZM]

http://www.anandtech.com/bench/product/1543?vs=697

[Asinin3]

"Edit: You could been say something like RPCS3 isn't optimized for AMD yet. But blaming to my hardware like they're not really that good, it's just funny."
I have a ryzen r7 1700 overclocked to 3.9ghz it works fine on AMD the problem is that CPU in particular has a low IPC. The link above shows it performing much slower than the 6700k you really shouldn't expect that kind of performance...

[SakataGintokiYT]

@BlackShadow306

Try with these settings :
[CPU]

*Preferred SPU Threads: 1
*Additional Settings:
-Lower SPU thread priority
-SPU loop detection

[BlackShadow]

Found a fix by myself. And getting 50fps straight. Despite someone was saying my hardware was bad. Lol, sure.

[Asinin3]

You found a fix by changing your settings, in which case providing a log achieved nothing (because the errors are normal). And I offered to help you in discord.

[paulsapps]

Thanks for actually telling everyone what the "fix" is. Very helpful and totally not a waste of everyone's time..

[Asinin3]

@paulsapps The video he linked was generally not above 50fps (outside the cinematic/fight transition) if he can achieve that high of a frame rate in rpcs3 he must've used liquid nitrogen to oc it. Yeah, doubtful... Edit: you can also see his comment on that video claiming 25-30fps suddenly getting an extra 20fps after copying the settings in that video is impossible he was already using vulkan +spu loop detection. Whatever I don't need to waste my time thinking about this anymore.