Rdpwrap: Not working on Windows 10 Pro v1903

Created on 19 Jul 2019  ·  44Comments  ·  Source: stascorp/rdpwrap

I just tested the latest version (zip file) with a fresh install of Windows 10 Pro x64 v1903 build 18362.175
RDPWrap does not work - it shows that it's running, installed, and listening, but says "not supported" and any attempts to connect to RDP lock the desktop (only one connection is permitted).

image

Any ideas?
Thank you.

picture ryangriggs

Most helpful comment

Hmm that usually means the INI file is no good. Let me grab another copy that I know that is working on a 1903 machine with the same version. Also don’t uninstall / reinstall that will replace the INI file you are copying in. Or if you reinstall basically you have to make sure you put the INI file back. Try the attached INI file again. Also one more thing, if you uninstall the Remote Desktop Services should start fine, so you could verify that.
rdpwrap.zip

picture shoeless22 on 20 Jul 2019
👍3 ❤1 🎉1

All 44 comments

I just spent a couple of hours finding this, you need this code below. I also zipped up and attached the ini file.

[10.0.18362.53]
LocalOnlyPatch.x86=1
LocalOnlyOffset.x86=B7D06
LocalOnlyCode.x86=jmpshort
LocalOnlyPatch.x64=1
LocalOnlyOffset.x64=82FB5
LocalOnlyCode.x64=jmpshort
SingleUserPatch.x86=1
SingleUserOffset.x86=50535
SingleUserCode.x86=nop
SingleUserPatch.x64=1
SingleUserOffset.x64=0DBFC
SingleUserCode.x64=Zero
DefPolicyPatch.x86=1
DefPolicyOffset.x86=50269
DefPolicyCode.x86=CDefPolicy_Query_eax_ecx
DefPolicyPatch.x64=1
DefPolicyOffset.x64=1FE15
DefPolicyCode.x64=CDefPolicy_Query_eax_rcx
SLInitHook.x86=1
SLInitOffset.x86=5A77A
SLInitFunc.x86=New_CSLQuery_Initialize
SLInitHook.x64=1
SLInitOffset.x64=22DDC
SLInitFunc.x64=New_CSLQuery_Initialize

[10.0.18362.53-SLInit]
bInitialized.x86 =D577C
bServerSku.x86 =D5780
lMaxUserSessions.x86 =D5784
bAppServerAllowed.x86 =D578C
bRemoteConnAllowed.x86=D5790
bMultimonAllowed.x86 =D5794
ulMaxDebugSessions.x86=D5798
bFUSEnabled.x86 =D579C
bInitialized.x64 =F6A8C
bServerSku.x64 =F6A90
lMaxUserSessions.x64 =F6A94
bAppServerAllowed.x64 =F6A9C
bRemoteConnAllowed.x64=F6AA0
bMultimonAllowed.x64 =F6AA4
ulMaxDebugSessions.x64=F6AA8
bFUSEnabled.x64 =F6AAC

rdpwrap.zip

shoeless22 picture shoeless22 on 19 Jul 2019
👍1

It doesn't seem to work. The RDPConf now shows "Fully Supported" but when
I connect with a second user via RDP, the console user gets booted off.

Am I doing something wrong?

Ryan Griggs
Hilltop Computing
www.hilltop.net
859-328-3223
Toll Free: 1 (888) 5-HILLTOP (888-544-5586)

On Fri, Jul 19, 2019 at 2:39 PM shoeless22 notifications@github.com wrote:

I just spent a couple of hours finding this, you need this code below. I
also zipped up and attached the ini file.

`[10.0.18362.53]
LocalOnlyPatch.x86=1
LocalOnlyOffset.x86=B7D06
LocalOnlyCode.x86=jmpshort
LocalOnlyPatch.x64=1
LocalOnlyOffset.x64=82FB5
LocalOnlyCode.x64=jmpshort
SingleUserPatch.x86=1
SingleUserOffset.x86=50535
SingleUserCode.x86=nop
SingleUserPatch.x64=1
SingleUserOffset.x64=0DBFC
SingleUserCode.x64=Zero
DefPolicyPatch.x86=1
DefPolicyOffset.x86=50269
DefPolicyCode.x86=CDefPolicy_Query_eax_ecx
DefPolicyPatch.x64=1
DefPolicyOffset.x64=1FE15
DefPolicyCode.x64=CDefPolicy_Query_eax_rcx
SLInitHook.x86=1
SLInitOffset.x86=5A77A
SLInitFunc.x86=New_CSLQuery_Initialize
SLInitHook.x64=1
SLInitOffset.x64=22DDC
SLInitFunc.x64=New_CSLQuery_Initialize

[10.0.18362.53-SLInit]
bInitialized.x86 =D577C
bServerSku.x86 =D5780
lMaxUserSessions.x86 =D5784
bAppServerAllowed.x86 =D578C
bRemoteConnAllowed.x86=D5790
bMultimonAllowed.x86 =D5794
ulMaxDebugSessions.x86=D5798
bFUSEnabled.x86 =D579C
bInitialized.x64 =F6A8C
bServerSku.x64 =F6A90
lMaxUserSessions.x64 =F6A94
bAppServerAllowed.x64 =F6A9C
bRemoteConnAllowed.x64=F6AA0
bMultimonAllowed.x64 =F6AA4
ulMaxDebugSessions.x64=F6AA8
bFUSEnabled.x64 =F6AAC`

rdpwrap.zip
https://github.com/stascorp/rdpwrap/files/3412287/rdpwrap.zip

—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub
https://github.com/stascorp/rdpwrap/issues/837?email_source=notifications&email_token=ABMVKGLGWWPPDYJ2EK5T7JDQAIC5XA5CNFSM4IFHSKTKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOD2MNXMQ#issuecomment-513334194,
or mute the thread
https://github.com/notifications/unsubscribe-auth/ABMVKGINCACY35P2CEXNEM3QAIC5XANCNFSM4IFHSKTA
.

ryangriggs picture ryangriggs on 19 Jul 2019

Try restarting service or rebooting, it should be working.

shoeless22 picture shoeless22 on 19 Jul 2019

I rebooted, now it shows the service not running. Which service am I
supposed to start?

Sent from my mobile. Please excuse any speling, or grammar, miskates.

On Fri, Jul 19, 2019, 5:09 PM shoeless22 notifications@github.com wrote:

Try restarting service or rebooting, it should be working.

—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub
https://github.com/stascorp/rdpwrap/issues/837?email_source=notifications&email_token=ABMVKGLSOXLYUMMCCBPVRXDQAIUSFA5CNFSM4IFHSKTKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOD2MYVVQ#issuecomment-513379030,
or mute the thread
https://github.com/notifications/unsubscribe-auth/ABMVKGMXYD3A4JWVE6M32MDQAIUSFANCNFSM4IFHSKTA
.

ryangriggs picture ryangriggs on 19 Jul 2019

Remote Desktop Services is the service that needs to be running. Did you copy and paste the attached INI file or did you edit your own file? What does RDPConf.exe show, does it show the everything Green?

shoeless22 picture shoeless22 on 19 Jul 2019

Thanks for your fast responses!

Every time I start Remote Desktop Services, it stops again in a few seconds.
The RDP Wrapper Configuration screen shows "Wrapper state: Installed",
"Service State: Stopped", "Listener State: Not listening"
If I start Remote Desktop Service, the "Service State" changes to running
for a few sec then back to Stopped, but Listener State never changes to
Listening.

I'm sure I'm doing something wrong... Just don't know what it is.

Thanks,

Ryan Griggs
Hilltop Computing
www.hilltop.net
859-328-3223
Toll Free: 1 (888) 5-HILLTOP (888-544-5586)

On Fri, Jul 19, 2019 at 5:27 PM shoeless22 notifications@github.com wrote:

Remote Desktop Services is the service that needs to be running. Did you
copy and paste the attached INI file or did you edit your own file? What
does RDPConf.exe show, does it show the everything Green?

From: Ryan Griggs notifications@github.com
Sent: Friday, July 19, 2019 2:21 PM
To: stascorp/rdpwrap rdpwrap@noreply.github.com
Cc: Beau Williams beau@perfectionpc.com; Comment <
[email protected]>
Subject: Re: [stascorp/rdpwrap] Not working on Windows 10 Pro v1903 (#837)

I rebooted, now it shows the service not running. Which service am I
supposed to start?

Sent from my mobile. Please excuse any speling, or grammar, miskates.

On Fri, Jul 19, 2019, 5:09 PM shoeless22 <[email protected] [email protected]>> wrote:

Try restarting service or rebooting, it should be working.

—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub
<
https://github.com/stascorp/rdpwrap/issues/837?email_source=notifications&email_token=ABMVKGLSOXLYUMMCCBPVRXDQAIUSFA5CNFSM4IFHSKTKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOD2MYVVQ#issuecomment-513379030>,

or mute the thread
<
https://github.com/notifications/unsubscribe-auth/ABMVKGMXYD3A4JWVE6M32MDQAIUSFANCNFSM4IFHSKTA>

.

—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub<
https://github.com/stascorp/rdpwrap/issues/837?email_source=notifications&email_token=AMVC64ZZOCZHPGGUB3OQAQ3QAIV4RA5CNFSM4IFHSKTKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOD2MZNJY#issuecomment-513382055>,
or mute the thread<
https://github.com/notifications/unsubscribe-auth/AMVC646DI6C2EDCQBN7OFBDQAIV4RANCNFSM4IFHSKTA>.

[ { "@context": "http://schema.org", "@type": "EmailMessage",
"potentialAction": { "@type": "ViewAction", "target": "
https://github.com/stascorp/rdpwrap/issues/837?email_source=notificationsu0026email_token=AMVC64ZZOCZHPGGUB3OQAQ3QAIV4RA5CNFSM4IFHSKTKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOD2MZNJY#issuecomment-513382055",
"url": "
https://github.com/stascorp/rdpwrap/issues/837?email_source=notificationsu0026email_token=AMVC64ZZOCZHPGGUB3OQAQ3QAIV4RA5CNFSM4IFHSKTKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOD2MZNJY#issuecomment-513382055",
"name": "View Issue" }, "description": "View this Issue on GitHub",
"publisher": { "@type": "Organization", "name": "GitHub", "url": "
https://github.com" } } ]

—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub
https://github.com/stascorp/rdpwrap/issues/837?email_source=notifications&email_token=ABMVKGLM27CQXD2JJSPZ5E3QAIWVFA5CNFSM4IFHSKTKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOD2MZ2HA#issuecomment-513383708,
or mute the thread
https://github.com/notifications/unsubscribe-auth/ABMVKGKL5JOIW4KBMUJTUHLQAIWVFANCNFSM4IFHSKTA
.

ryangriggs picture ryangriggs on 20 Jul 2019

Also, I copied the ini file from your ZIP file to the c:program filesRDP
Wrapper directory, then rebooted. I think I also ran the Install and
Uninstall and Update batch files a few times hoping it would fix the issue.

Ryan Griggs
Hilltop Computing
www.hilltop.net
859-328-3223
Toll Free: 1 (888) 5-HILLTOP (888-544-5586)

On Fri, Jul 19, 2019 at 6:12 PM Ryan Griggs rgriggs@hilltop.net wrote:

Thanks for your fast responses!

Every time I start Remote Desktop Services, it stops again in a few
seconds.
The RDP Wrapper Configuration screen shows "Wrapper state: Installed",
"Service State: Stopped", "Listener State: Not listening"
If I start Remote Desktop Service, the "Service State" changes to running
for a few sec then back to Stopped, but Listener State never changes to
Listening.

I'm sure I'm doing something wrong... Just don't know what it is.

Thanks,

Ryan Griggs
Hilltop Computing
www.hilltop.net
859-328-3223
Toll Free: 1 (888) 5-HILLTOP (888-544-5586)

On Fri, Jul 19, 2019 at 5:27 PM shoeless22 notifications@github.com
wrote:

Remote Desktop Services is the service that needs to be running. Did you
copy and paste the attached INI file or did you edit your own file? What
does RDPConf.exe show, does it show the everything Green?

From: Ryan Griggs notifications@github.com
Sent: Friday, July 19, 2019 2:21 PM
To: stascorp/rdpwrap rdpwrap@noreply.github.com
Cc: Beau Williams beau@perfectionpc.com; Comment <
[email protected]>
Subject: Re: [stascorp/rdpwrap] Not working on Windows 10 Pro v1903
(#837)

I rebooted, now it shows the service not running. Which service am I
supposed to start?

Sent from my mobile. Please excuse any speling, or grammar, miskates.

On Fri, Jul 19, 2019, 5:09 PM shoeless22 <[email protected]
notifications@github.com> wrote:

Try restarting service or rebooting, it should be working.

—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub
<
https://github.com/stascorp/rdpwrap/issues/837?email_source=notifications&email_token=ABMVKGLSOXLYUMMCCBPVRXDQAIUSFA5CNFSM4IFHSKTKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOD2MYVVQ#issuecomment-513379030>,

or mute the thread
<
https://github.com/notifications/unsubscribe-auth/ABMVKGMXYD3A4JWVE6M32MDQAIUSFANCNFSM4IFHSKTA>

.

—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub<
https://github.com/stascorp/rdpwrap/issues/837?email_source=notifications&email_token=AMVC64ZZOCZHPGGUB3OQAQ3QAIV4RA5CNFSM4IFHSKTKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOD2MZNJY#issuecomment-513382055>,
or mute the thread<
https://github.com/notifications/unsubscribe-auth/AMVC646DI6C2EDCQBN7OFBDQAIV4RANCNFSM4IFHSKTA>.

[ { "@context": "http://schema.org", "@type": "EmailMessage",
"potentialAction": { "@type": "ViewAction", "target": "
https://github.com/stascorp/rdpwrap/issues/837?email_source=notificationsu0026email_token=AMVC64ZZOCZHPGGUB3OQAQ3QAIV4RA5CNFSM4IFHSKTKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOD2MZNJY#issuecomment-513382055",
"url": "
https://github.com/stascorp/rdpwrap/issues/837?email_source=notificationsu0026email_token=AMVC64ZZOCZHPGGUB3OQAQ3QAIV4RA5CNFSM4IFHSKTKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOD2MZNJY#issuecomment-513382055",
"name": "View Issue" }, "description": "View this Issue on GitHub",
"publisher": { "@type": "Organization", "name": "GitHub", "url": "
https://github.com" } } ]

—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub
https://github.com/stascorp/rdpwrap/issues/837?email_source=notifications&email_token=ABMVKGLM27CQXD2JJSPZ5E3QAIWVFA5CNFSM4IFHSKTKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOD2MZ2HA#issuecomment-513383708,
or mute the thread
https://github.com/notifications/unsubscribe-auth/ABMVKGKL5JOIW4KBMUJTUHLQAIWVFANCNFSM4IFHSKTA
.

ryangriggs picture ryangriggs on 20 Jul 2019

Hmm that usually means the INI file is no good. Let me grab another copy that I know that is working on a 1903 machine with the same version. Also don’t uninstall / reinstall that will replace the INI file you are copying in. Or if you reinstall basically you have to make sure you put the INI file back. Try the attached INI file again. Also one more thing, if you uninstall the Remote Desktop Services should start fine, so you could verify that.
rdpwrap.zip

shoeless22 picture shoeless22 on 20 Jul 2019
👍3 ❤1 🎉1

Here's what RDPConfig says:

[image: image.png]

But when I connect, it disconnects the console session - so it's not
working.

Any suggestions are greatly appreciated.

Thank you,
Ryan

Ryan Griggs
Hilltop Computing
www.hilltop.net
859-328-3223
Toll Free: 1 (888) 5-HILLTOP (888-544-5586)

On Fri, Jul 19, 2019 at 6:14 PM Ryan Griggs rgriggs@hilltop.net wrote:

Also, I copied the ini file from your ZIP file to the c:program filesRDP
Wrapper directory, then rebooted. I think I also ran the Install and
Uninstall and Update batch files a few times hoping it would fix the issue.

Ryan Griggs
Hilltop Computing
www.hilltop.net
859-328-3223
Toll Free: 1 (888) 5-HILLTOP (888-544-5586)

On Fri, Jul 19, 2019 at 6:12 PM Ryan Griggs rgriggs@hilltop.net wrote:

Thanks for your fast responses!

Every time I start Remote Desktop Services, it stops again in a few
seconds.
The RDP Wrapper Configuration screen shows "Wrapper state: Installed",
"Service State: Stopped", "Listener State: Not listening"
If I start Remote Desktop Service, the "Service State" changes to running
for a few sec then back to Stopped, but Listener State never changes to
Listening.

I'm sure I'm doing something wrong... Just don't know what it is.

Thanks,

Ryan Griggs
Hilltop Computing
www.hilltop.net
859-328-3223
Toll Free: 1 (888) 5-HILLTOP (888-544-5586)

On Fri, Jul 19, 2019 at 5:27 PM shoeless22 notifications@github.com
wrote:

Remote Desktop Services is the service that needs to be running. Did you
copy and paste the attached INI file or did you edit your own file? What
does RDPConf.exe show, does it show the everything Green?

From: Ryan Griggs notifications@github.com
Sent: Friday, July 19, 2019 2:21 PM
To: stascorp/rdpwrap rdpwrap@noreply.github.com
Cc: Beau Williams beau@perfectionpc.com; Comment <
[email protected]>
Subject: Re: [stascorp/rdpwrap] Not working on Windows 10 Pro v1903
(#837)

I rebooted, now it shows the service not running. Which service am I
supposed to start?

Sent from my mobile. Please excuse any speling, or grammar, miskates.

On Fri, Jul 19, 2019, 5:09 PM shoeless22 <[email protected]
notifications@github.com> wrote:

Try restarting service or rebooting, it should be working.

—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub
<
https://github.com/stascorp/rdpwrap/issues/837?email_source=notifications&email_token=ABMVKGLSOXLYUMMCCBPVRXDQAIUSFA5CNFSM4IFHSKTKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOD2MYVVQ#issuecomment-513379030>,

or mute the thread
<
https://github.com/notifications/unsubscribe-auth/ABMVKGMXYD3A4JWVE6M32MDQAIUSFANCNFSM4IFHSKTA>

.

—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub<
https://github.com/stascorp/rdpwrap/issues/837?email_source=notifications&email_token=AMVC64ZZOCZHPGGUB3OQAQ3QAIV4RA5CNFSM4IFHSKTKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOD2MZNJY#issuecomment-513382055>,
or mute the thread<
https://github.com/notifications/unsubscribe-auth/AMVC646DI6C2EDCQBN7OFBDQAIV4RANCNFSM4IFHSKTA>.

[ { "@context": "http://schema.org", "@type": "EmailMessage",
"potentialAction": { "@type": "ViewAction", "target": "
https://github.com/stascorp/rdpwrap/issues/837?email_source=notificationsu0026email_token=AMVC64ZZOCZHPGGUB3OQAQ3QAIV4RA5CNFSM4IFHSKTKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOD2MZNJY#issuecomment-513382055",
"url": "
https://github.com/stascorp/rdpwrap/issues/837?email_source=notificationsu0026email_token=AMVC64ZZOCZHPGGUB3OQAQ3QAIV4RA5CNFSM4IFHSKTKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOD2MZNJY#issuecomment-513382055",
"name": "View Issue" }, "description": "View this Issue on GitHub",
"publisher": { "@type": "Organization", "name": "GitHub", "url": "
https://github.com" } } ]

—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub
https://github.com/stascorp/rdpwrap/issues/837?email_source=notifications&email_token=ABMVKGLM27CQXD2JJSPZ5E3QAIWVFA5CNFSM4IFHSKTKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOD2MZ2HA#issuecomment-513383708,
or mute the thread
https://github.com/notifications/unsubscribe-auth/ABMVKGKL5JOIW4KBMUJTUHLQAIWVFANCNFSM4IFHSKTA
.

ryangriggs picture ryangriggs on 20 Jul 2019

I just spent a couple of hours finding this, you need this code below. I also zipped up and attached the ini file.

[10.0.18362.53]
LocalOnlyPatch.x86=1
LocalOnlyOffset.x86=B7D06
LocalOnlyCode.x86=jmpshort
LocalOnlyPatch.x64=1
LocalOnlyOffset.x64=82FB5
LocalOnlyCode.x64=jmpshort
SingleUserPatch.x86=1
SingleUserOffset.x86=50535
SingleUserCode.x86=nop
SingleUserPatch.x64=1
SingleUserOffset.x64=0DBFC
SingleUserCode.x64=Zero
DefPolicyPatch.x86=1
DefPolicyOffset.x86=50269
DefPolicyCode.x86=CDefPolicy_Query_eax_ecx
DefPolicyPatch.x64=1
DefPolicyOffset.x64=1FE15
DefPolicyCode.x64=CDefPolicy_Query_eax_rcx
SLInitHook.x86=1
SLInitOffset.x86=5A77A
SLInitFunc.x86=New_CSLQuery_Initialize
SLInitHook.x64=1
SLInitOffset.x64=22DDC
SLInitFunc.x64=New_CSLQuery_Initialize

[10.0.18362.53-SLInit]
bInitialized.x86 =D577C
bServerSku.x86 =D5780
lMaxUserSessions.x86 =D5784
bAppServerAllowed.x86 =D578C
bRemoteConnAllowed.x86=D5790
bMultimonAllowed.x86 =D5794
ulMaxDebugSessions.x86=D5798
bFUSEnabled.x86 =D579C
bInitialized.x64 =F6A8C
bServerSku.x64 =F6A90
lMaxUserSessions.x64 =F6A94
bAppServerAllowed.x64 =F6A9C
bRemoteConnAllowed.x64=F6AA0
bMultimonAllowed.x64 =F6AA4
ulMaxDebugSessions.x64=F6AA8
bFUSEnabled.x64 =F6AAC

rdpwrap.zip

Thanks alot. That ini file works for me.

UVJkiNTQ picture UVJkiNTQ on 20 Jul 2019

Thank you VERY VERY MUCH! This latest file you attached worked for me too, I'm up and running with rdpwrap on Win10 Home version 1903 as of today (July 23, 2019)

Hmm that usually means the INI file is no good. Let me grab another copy that I know that is working on a 1903 machine with the same version. Also don’t uninstall / reinstall that will replace the INI file you are copying in. Or if you reinstall basically you have to make sure you put the INI file back. Try the attached INI file again. Also one more thing, if you uninstall the Remote Desktop Services should start fine, so you could verify that. rdpwrap.zip

batchtest picture batchtest on 23 Jul 2019

It also seems like the installer is not working. I can't even see the RDP Wrapper Configuration window shown in the first post here.

josharmour picture josharmour on 23 Jul 2019

Use the ZIP not the EXE. Extract the ZIP to C:RDPWrap and then use the files from there such as install.bat, etc.
https://github.com/stascorp/rdpwrap/releases/download/v1.6.2/RDPWrap-v1.6.2.zip

shoeless22 picture shoeless22 on 23 Jul 2019

That worked, thanks Shoeless22.

Another question, where does the ini file attached above go to patch the install? I tried in C:RDPWrap but it doesn't seem to have an existing ini file and putting it in that directory didn't work.

josharmour picture josharmour on 23 Jul 2019

When you run the install.bat it creates C:program fillesrdp wrap I believe is the correct path or search for the ini file in your c: drive.

shoeless22 picture shoeless22 on 23 Jul 2019

I found the answer to my own question.

Replace file C:Program FilesRDP Wrapperrdpwrap.ini with one from this post..
Restart termservice.
Use it. No need to restart the computer.

josharmour picture josharmour on 23 Jul 2019

Latest ini file worked for me too. Win10Pro 1903.
Listening State Listening--> Fully Supported.
Rebooting helped.

Saoulos picture Saoulos on 27 Jul 2019

I am on 1903 Build 18362.267 and unfortunately none of the recommendations above work for me. Any suggestions?

kastnerp picture kastnerp on 9 Aug 2019

So for everyone who's running Service 10.0.18362.53 here is my solution for the rdpwrap.ini

[10.0.18362.53]
LocalOnlyPatch.x64=1
LocalOnlyOffset.x64=759E8
LocalOnlyCode.x64=jmpshort
SingleUserPatch.x64=1
SingleUserOffset.x64=0DCC9
SingleUserCode.x64=Zero
DefPolicyPatch.x64=1
DefPolicyOffset.x64=1FE15
DefPolicyCode.x64=CDefPolicy_Query_eax_rcx
SLInitHook.x64=1
SLInitOffset.x64=22DDC
SLInitFunc.x64=New_CSLQuery_Initialize

[10.0.18362.53-SLInit]
bInitialized.x64 =F6A8C
bServerSku.x64 =F6A90
lMaxUserSessions.x64 =F6A94
bAppServerAllowed.x64 =F6A9C
bRemoteConnAllowed.x64=F6AA0
bMultimonAllowed.x64 =F6AA4
ulMaxDebugSessions.x64=F6AA8
bFUSEnabled.x64 =F6AAC

SingleSession, MultiSession, Reconnecting the RDP-Session, everything is working perfectly.

cosmos321 picture cosmos321 on 10 Aug 2019

@cosmos321 will this work for version .267?

snugglesftw picture snugglesftw on 12 Aug 2019

For me, it is working, see my post here: https://github.com/stascorp/rdpwrap/issues/858#issuecomment-521358382

cosmos321 picture cosmos321 on 14 Aug 2019

Hmm that usually means the INI file is no good. Let me grab another copy that I know that is working on a 1903 machine with the same version. Also don’t uninstall / reinstall that will replace the INI file you are copying in. Or if you reinstall basically you have to make sure you put the INI file back. Try the attached INI file again. Also one more thing, if you uninstall the Remote Desktop Services should start fine, so you could verify that. rdpwrap.zip

This solution worked for me, thank you

ptaylor25 picture ptaylor25 on 16 Aug 2019

My is not working after doing everything
any suggestions??????????
listener state not supported

abhinavdangri picture abhinavdangri on 24 Dec 2019

stop the service running CMD as administrator
net stop termservice
Replace rdpwrap.ini in C:Program FilesRDP Wrapper
net start termservice

Saoulos picture Saoulos on 24 Dec 2019

image

abhinavdangri picture abhinavdangri on 24 Dec 2019

not working after doing this also

abhinavdangri picture abhinavdangri on 24 Dec 2019

The same with me. Replaced INI file and the result was

изображение
Any new additions to the INI file?

jwalkerbg picture jwalkerbg on 20 Jan 2020

Here is what I do now, see the attached zip for the files.

  1. Copy the contents of RDPWrap-v1.6.2 folder to computer path "%ProgramFiles%RDP Wrapper" (c:Program FilesRDP Wrapper)
  2. Run as Administrator install.bat
  3. Run as Administrator autoupdate.bat
  4. Under the Helper Folder Run as Administrator autoupdate__enable_autorun_on_startup.bat
  5. Use RDPConf.exe to make sure our DLL version is Fully Supported in GREEN
  6. Use RDPCheck.exe to test

(Do not run update.bat, this will download an old ini file, that is why I have renamed it to update.bat.BAD)

https://github.com/stascorp/rdpwrap/issues
RDPWrap-v1.6.2.zip

shoeless22 picture shoeless22 on 21 Jan 2020
👍3

@shoeless22 Thank you! You saved my day ;)

imZack picture imZack on 6 Feb 2020

@shoeless22 Works flawlessly in the newest win10 version (1909_Build_18363.657_x64). Thanks a lot.

cosmos321 picture cosmos321 on 22 Feb 2020

Dear @shoeless22,

Thank you for taking time to make that kind of helpful modification. Until now, I couldn't get a satisfying result and I'm starting to think that I may not be able to achieve the intended result. To explain briefly, I'm trying to connect to my computer session from my Android smartphone using Microsoft Remote Desktop app. So far, I've managed to make it work as it's supposed to (so it logs off my computer when connecting to the session) then I found out about RDP Wrap.

I first had [not supported] so I tried other .ini files and now the issue is fixed and everythings shows in green. I'm still able to use the Remote Desktop app and log in the computer but it stills log it off so there is not much progress. I've unchecked the "single session per user" option but it does not affect the result.
My question is just to know if I missed anything or if the Android Remote on a computer with the same session is just not possible.

Disconnecting my computer session has just no interest for me because I want to use my smartphone as a remote and be able to see what I'm doing on the computer screen. I remember I was doing it long ago with LogMeIn. The difference is I'm trying not to use a third party software and I want to be able to connect without any permission (only local network connection)

I'd be very grateful if you could give me more informations,

Regards,

TraxXx44 picture TraxXx44 on 1 Mar 2020

Test from another computer and see if it works, possibly the Android RDP program you are using it causing the issue but doubtful. Or technically you can even test using the RDP Check tool included in the package from the same computer you are installing on. Also try updating your Windows 10 to the latest version with all updates then run the updater for RDP Wrap again and make sure all is green then test again from your Android device.

From: TraxXx44 notifications@github.com
Sent: Sunday, March 1, 2020 10:47 AM
To: stascorp/rdpwrap rdpwrap@noreply.github.com
Cc: Beau Williams beau@perfectionpc.com; Mention mention@noreply.github.com
Subject: Re: [stascorp/rdpwrap] Not working on Windows 10 Pro v1903 (#837)

Dear @shoeless22https://github.com/shoeless22,

Thank you for taking time to make that kind of helpful modification. Until now, I couldn't get a satisfying result and I'm start to think that I may not be able to achieve the inteded result. To explain briefly, I'm trying to connect to my computer session from my Android smartphone using Microsoft Remote Desktop app. So far, I've managed to make it work on the basic way (so it logs off my computer when connecting) then I found out about RDP Wrap. I first had [not supported] and tried other .ini files and now the issue is fixed and everythings shows in green. I'm still able to use the Remote Desktop app and log in the comlputer but it stills log it off so there is not much progress. I've unchecked the "single session per user" option but it does not affect the result.
My question is just to know if I missed anything or if the Android to computer with the same session use is just not possible. Disconnecting my computer session has just no interest for me because I want to use my smartphone as a remote but be able to see what I'm doing on the computer screen. I remember I was doing it long ago with LogMeIn. The difference is I'm trying not to use a third party software and I want to be able to connect without any permission (only local network connection)

I'd be very grateful if you could give me more informations,

Regards,

—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHubhttps://github.com/stascorp/rdpwrap/issues/837?email_source=notifications&email_token=AMVC642WH5SV5VHAI5NFCMTRFKUSZA5CNFSM4IFHSKTKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOENNHIPQ#issuecomment-593130558, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AMVC6455MJED3PVIOZLW6YTRFKUSZANCNFSM4IFHSKTA.

shoeless22 picture shoeless22 on 2 Mar 2020

我也一样 替换了INI文件，结果是

изображение
INI文件有任何新增内容吗？

你好，请问你的问题解决了吗？

Jay-hou picture Jay-hou on 6 Mar 2020

Use this ini file. And then do a service restart with RDPWInst -r using elevated cmd.

affinityv picture affinityv on 6 Mar 2020

Buen día, soy Omar!!
Tengo un problema con el rdp wrraper, no me permite mas de una sesión, alguien puede ayudarme por favor?. Gracias.
Abajo dejo una captura.

image

chapaoac picture chapaoac on 13 Mar 2020

@chapaoac Are you running 32bit or 64bit Windows? The ini file I have only has x64 version for that version. Do you have Windows updates to bring it to a later version for termsrv.dll ?

affinityv picture affinityv on 13 Mar 2020

Buenas tardes en 64bits

El vie., 13 mar. 2020 18:37, affinityv notifications@github.com escribió:

@chapaoac https://github.com/chapaoac Are you running 32bit or 64bit
Windows? The ini file I have only has x64 version for that version. Do you
have Windows updates to bring it to a later version for termsrv.dll ?

—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub
https://github.com/stascorp/rdpwrap/issues/837#issuecomment-598922492,
or unsubscribe
https://github.com/notifications/unsubscribe-auth/AMXFZBAA4FFI2VL2JEZG3MDRHKRTHANCNFSM4IFHSKTA
.

chapaoac picture chapaoac on 13 Mar 2020

@chapaoac ¿Está ejecutando Windows de 32 bits o 64 bits? El archivo ini que tengo solo tiene una versión x64 para esa versión. ¿Tiene actualizaciones de Windows para llevarlo a una versión posterior de termsrv.dll?

Buenas tardes actualice a la versión de Windows 10 pro 1909 V18363.720, podrías ayudarme por favor?. Mí sistema operativo es de 64 bits

chapaoac picture chapaoac on 13 Mar 2020

The people whom are creating the INI file sections (working out the sections, not just making them available) will need a copy of your termsrv.dll -- they need that to be able to create the relevant INI file section for that version.

affinityv picture affinityv on 14 Mar 2020

Gracias por su respuesta, díganme cómo realizarlo por favor!
Quedó a su disposición para tratar de solucionarlo.
Desde ya muchas gracias.

El vie., 13 mar. 2020 20:06, affinityv notifications@github.com escribió:

The people whom are creating the INI file sections (working out the
sections, not just making them available) will need a copy of your
termsrv.dll -- they need that to be able to create the relevant INI file
section for that version.

—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub
https://github.com/stascorp/rdpwrap/issues/837#issuecomment-598966727,
or unsubscribe
https://github.com/notifications/unsubscribe-auth/AMXFZBE4P75HLFKBQBEVJGDRHK35TANCNFSM4IFHSKTA
.

chapaoac picture chapaoac on 14 Mar 2020

The termsrv.dll is within your %SystemRoot%system32 directory, normal C:Windowssystem32.
Find that file, upload it and put a link to it here.

affinityv picture affinityv on 14 Mar 2020

@affinityv Buenas noches, envío el archivo solicitado.
Dejo el link donde guarde el dll.

https://drive.google.com/drive/folders/1OjAXsdR23tT2szO7wZc2uwgQA2ONBvmq?usp=sharing

Adjunto captura del soft y sistema operativo 64bits.

image

Saludos, atte. Omar

chapaoac picture chapaoac on 14 Mar 2020

El termsrv.dll está dentro de su directorio% SystemRoot% system32, C: Windows system32 normal.
Encuentra ese archivo, súbelo y ponle un enlace aquí.

Hola buenas noches, alguien habrá podido encontrar la solución para mi versión de rdp? Deje en mensaje anterior el archivo termsrv.dll. Ayuda por favor!!!
La versión de Windows 10 pro 64 bits 1909 V18363.720

chapaoac picture chapaoac on 27 Mar 2020

@chapaoac This should do you fine.

affinityv picture affinityv on 27 Mar 2020
Was this page helpful?
0 / 5 - 0 ratings

Related issues

Trooper29 picture Trooper29  ·  4Comments
dagwieers picture dagwieers  ·  4Comments
wanglulei picture wanglulei  ·  4Comments
cakexxx picture cakexxx  ·  6Comments
eduardolucioac picture eduardolucioac  ·  4Comments