Raspiblitz: Installing v1.6.0rc1: RTL 502 Bad Gateway
After installing v1.6.0rc1 the web interface response is: 502 Bad Gateway
https://localip:3001
sudo netstat -tulpn|grep 3001:
tcp 0 0 0.0.0.0:3001 0.0.0.0:* LISTEN 14821/nginx: master
tcp6 0 0 :::3001 :::* LISTEN 14821/nginx: master
adevoss
All 25 comments
RTL works ok for me.
Use the https://RASPIBLITZ_LAN_IP:3001 instead of localhost.
test nginx with:
sudo nginx -t
openoms
on 26 Jun 2020
By localip I meant I used the private IP address not the one from my ISP.
sudo nginx -t
nginx: the configuration file /etc/nginx/nginx.conf syntax is ok
nginx: configuration file /etc/nginx/nginx.conf test is successful
error_rtl.log:
2020/06/26 11:06:20 [error] 14822#14822: *22 connect() failed (111: Connection refused) while connecting to upstream, client: <PRIVATE_IP>, server: _, request: "GET /favicon.ico HTTP/1.1", upstream: "http://127.0.0.1:3000/favicon.ico", host: "<RASPIBLITZ_LAN_IP>:3001"
In that log there is a upstream 127.0.0.1:3000
sudo netstat -tulpn|grep 3000
Nothing (Yes it returns BTCPayServer but that is port 23000)
adevoss
on 26 Jun 2020
I have all ports active (together with the recently fixed BTCPay ports)
$ sudo netstat -tulpn|grep 300
tcp 0 0 127.0.0.1:23000 0.0.0.0:* LISTEN 15727/BTCPayServer
tcp 0 0 0.0.0.0:3001 0.0.0.0:* LISTEN 20603/nginx: master
tcp 0 0 0.0.0.0:23001 0.0.0.0:* LISTEN 20603/nginx: master
tcp 0 0 127.0.0.1:3002 0.0.0.0:* LISTEN 20603/nginx: master
tcp 0 0 127.0.0.1:23002 0.0.0.0:* LISTEN 20603/nginx: master
tcp 0 0 127.0.0.1:3003 0.0.0.0:* LISTEN 20603/nginx: master
tcp 0 0 127.0.0.1:23003 0.0.0.0:* LISTEN 20603/nginx: master
tcp6 0 0 :::3000 :::* LISTEN 3126/node
tcp6 0 0 :::3001 :::* LISTEN 20603/nginx: master
tcp6 0 0 :::23001 :::* LISTEN 20603/nginx: master
tcp6 0 0 ::1:3002 :::* LISTEN 20603/nginx: master
tcp6 0 0 ::1:23002 :::* LISTEN 20603/nginx: master
tcp6 0 0 ::1:3003 :::* LISTEN 20603/nginx: master
tcp6 0 0 ::1:23003 :::* LISTEN 20603/nginx: master
is RTL running?
sudo systemctl status RTL
can benefit from a restart too.
It is likely that 1.6RC2 will sort this all out.
openoms
on 26 Jun 2020
is RTL running?
No.
Jun 26 14:00:36 -xxx- systemd[1]: Started RTL daemon.
Jun 26 14:00:37 -xxx- node[1444]: internal/modules/cjs/loader.js:960
Jun 26 14:00:37 -xxx- node[1444]: throw err;
Jun 26 14:00:37 -xxx- node[1444]: ^
Jun 26 14:00:37 -xxx- node[1444]: Error: Cannot find module 'express'
Jun 26 14:00:37 -xxx- node[1444]: Require stack:
Jun 26 14:00:37 -xxx- node[1444]: - /home/rtl/RTL/app.js
Jun 26 14:00:37 -xxx- node[1444]: - /home/rtl/RTL/rtl.js
Jun 26 14:00:37 -xxx- node[1444]: at Function.Module._resolveFilename (internal/modules/cjs/loader.js:957:15)
Jun 26 14:00:37 -xxx- node[1444]: at Function.Module._load (internal/modules/cjs/loader.js:840:27)
Jun 26 14:00:37 -xxx- node[1444]: at Module.require (internal/modules/cjs/loader.js:1019:19)
Jun 26 14:00:37 -xxx- node[1444]: at require (internal/modules/cjs/helpers.js:77:18)
Jun 26 14:00:37 -xxx- node[1444]: at Object.
Jun 26 14:00:37 -xxx- node[1444]: at Module._compile (internal/modules/cjs/loader.js:1133:30)
Jun 26 14:00:37 -xxx- node[1444]: at Object.Module._extensions..js (internal/modules/cjs/loader.js:1153:10)
Jun 26 14:00:37 -xxx- node[1444]: at Module.load (internal/modules/cjs/loader.js:977:32)
Jun 26 14:00:37 -xxx- node[1444]: at Function.Module._load (internal/modules/cjs/loader.js:877:14)
Jun 26 14:00:37 -xxx- node[1444]: at Module.require (internal/modules/cjs/loader.js:1019:19) {
Jun 26 14:00:37 -xxx- node[1444]: code: 'MODULE_NOT_FOUND',
Jun 26 14:00:37 -xxx- node[1444]: requireStack: [ '/home/rtl/RTL/app.js', '/home/rtl/RTL/rtl.js' ]
Jun 26 14:00:37 -xxx- node[1444]: }
Jun 26 14:00:37 -xxx- systemd[1]: RTL.service: Main process exited, code=exited, status=1/FAILURE
Jun 26 14:00:37 -xxx- systemd[1]: RTL.service: Failed with result 'exit-code'.
adevoss
on 26 Jun 2020
reinstall RTL then
openoms
on 27 Jun 2020
@adevoss also BEFORE you deinstall RTL make a update on the v1.6 code with MAINMENU > UPDATE > PATCH > PATCHMENU > PATCH and then reinstall it
rootzoll
on 27 Jun 2020
Patched - Reboot - Deinstall RTL - Reboot - Install RTL - Reboot
Same result
* Run: npm install *
npm WARN tarball tarball data for @angular/[email protected] (sha512-ABZO4E7eeFA1QyJ2trDezxeQM5ZFa1dXw1Mpl/+1vuXDKNjJgNyWYwKp/NwRkLmrsuV0yv4UDCDe4kJOGbPKnw==) seems to be corrupted. Trying one more time.
npm WARN tarball tarball data for [email protected] (sha1-mnHEh0chjrylHlGmbaaCA4zct78=) seems to be corrupted. Trying one more time.
lots of lines like this:
npm WARN tar ENOENT: no such file or directory, open '/home/rtl/RTL/node_modules/.staging/@angular/material-d651ff7c/grid-list/package.json'
npm WARN tar ENOENT: no such file or directory, open '/home/rtl/RTL/node_modules/.staging/@angular/material-d651ff7c/icon/package.json'
npm ERR! A complete log of this run can be found in:
npm ERR! /home/rtl/.npm/_logs/2020-06-27T17_16_31_824Z-debug.log
OK - RTL install looks good
/var/log/syslog:
....
Jun 27 19:20:19 xxx node[17157]: internal/modules/cjs/loader.js:960
Jun 27 19:20:19 xxx node[17157]: throw err;
Jun 27 19:20:19 xxx node[17157]: ^
Jun 27 19:20:19 xxx node[17157]: Error: Cannot find module 'express'
Jun 27 19:20:19 xxx node[17157]: Require stack:
Jun 27 19:20:19 xxx node[17157]: - /home/rtl/RTL/app.js
Jun 27 19:20:19 xxx node[17157]: - /home/rtl/RTL/rtl.js
Jun 27 19:20:19 xxx node[17157]: at Function.Module._resolveFilename (internal/modules/cjs/loader.js:957:15)
Jun 27 19:20:19 xxx node[17157]: at Function.Module._load (internal/modules/cjs/loader.js:840:27)
Jun 27 19:20:19 xxx node[17157]: at Module.require (internal/modules/cjs/loader.js:1019:19)
Jun 27 19:20:19 xxx node[17157]: at require (internal/modules/cjs/helpers.js:77:18)
Jun 27 19:20:19 xxx node[17157]: at Object.
Jun 27 19:20:19 xxx node[17157]: at Module._compile (internal/modules/cjs/loader.js:1133:30)
Jun 27 19:20:19 xxx node[17157]: at Object.Module._extensions..js (internal/modules/cjs/loader.js:1153:10)
Jun 27 19:20:19 xxx node[17157]: at Module.load (internal/modules/cjs/loader.js:977:32)
Jun 27 19:20:19 xxx node[17157]: at Function.Module._load (internal/modules/cjs/loader.js:877:14)
Jun 27 19:20:19 xxx node[17157]: at Module.require (internal/modules/cjs/loader.js:1019:19) {
Jun 27 19:20:19 xxx node[17157]: code: 'MODULE_NOT_FOUND',
Jun 27 19:20:19 xxx node[17157]: requireStack: [ '/home/rtl/RTL/app.js', '/home/rtl/RTL/rtl.js' ]
Jun 27 19:20:19 xxx node[17157]: }
Jun 27 19:20:19 xxx systemd[1]: RTL.service: Main process exited, code=exited, status=1/FAILURE
Jun 27 19:20:19 xxx systemd[1]: RTL.service: Failed with result 'exit-code'.
....
adevoss
on 27 Jun 2020
hmm @saubyk can you see why we get a Cannot find module 'express' error here?
rootzoll
on 28 Jun 2020
On a x86_64 VM RTL is installed OK
adevoss
on 28 Jun 2020
Tagging @shahanafarooqui
saubyk
on 28 Jun 2020
Usually these ‘tarballs data’ errors are thrown when npm has been corrupted for some reason. Please try following steps:
Go to your root RTL directory.
Delete ‘node_modules’ folder.
Delete package-lock.json (Optional step).
Run ‘npm cache verify’.
Run ‘npm install --only=prod’.
If above steps do not fix the issue then you might have to reinstall node and npm.
ShahanaFarooqui
on 28 Jun 2020
Run ‘npm install --only=prod’.
(as rtl user)
Takes a long time...
adevoss
on 28 Jun 2020
Signes of a dying SDcard there.
openoms
on 29 Jun 2020
Signes of a dying SDcard there.
Not using SD card. How can I check USB stick? With fsck or are there other things I can do?
Hardware is Pi4B/2GB.
adevoss
on 29 Jun 2020
There is a web interface now. Can login. Looks fine (not browsed everything).
Completed in 5 hours with a few deprecated/dependencies warnings.
Also did npm audit fix because it is suggested at completion of install:
Cannot download "https://github.com/sass/node-sass/releases/download/v4.14.1/linux-arm-72_binding.node":
HTTP error 404 Not Found
...
> [email protected] postinstall /home/rtl/RTL/node_modules/core-js
> node -e "try{require('./postinstall')}catch(e){}"
...
gyp verb `which` failed Error: not found: python2
...
gyp ERR! stack import sys; print "%s.%s.%s" % sys.version_info[:3];
gyp ERR! stack ^
gyp ERR! stack SyntaxError: invalid syntax
...
npm ERR! code ELIFECYCLE
npm ERR! errno 1
npm ERR! [email protected] postinstall: `node scripts/build.js`
npm ERR! Exit status 1
npm ERR!
npm ERR! Failed at the [email protected] postinstall script.
npm ERR! This is probably not a problem with npm. There is likely additional logging output above.
Signes of a dying SDcard there.
Not using SD card. How can I check USB stick? With
fsckor are there other things I can do?
Hardware is Pi4B/2GB.
slowing down happens before becoming read only.
fsck is one but read-write/speed tests on desktop would show it better. Depends on your platform, plenty of tools are available.
See this related thread: https://github.com/rootzoll/raspiblitz/issues/924
openoms
on 29 Jun 2020
@openoms Thank for the hint.
Using USB stick to boot maybe not such a good idea. USB stick is about a week old.
Other topic but just a thought. Will discuss this in #430 .
adevoss
on 29 Jun 2020
@adevoss we do not suggest to run audit fix at user’s end. We keep auditing/upgrading the dependencies with every release. But, fixing them at user’s end can result in unexpected behavior or broken UI.
ShahanaFarooqui
on 29 Jun 2020
@ShahanaFarooqui Will do these steps https://github.com/rootzoll/raspiblitz/issues/1285#issuecomment-650761583 again without audit fix. To be on v1.6.0rc1.
adevoss
on 29 Jun 2020
@openoms I tested the RTL install multiple times - looks good for the v1.6 release. Anything still to do?
rootzoll
on 29 Jun 2020
I don't think there is any more to do, RTL works well.
EDIT: RTL works well.
openoms
on 29 Jun 2020
@openoms what's the issue?
saubyk
on 29 Jun 2020
@openoms what's the issue?
sorry, misleading words. Edited.
All good with RTL!
openoms
on 29 Jun 2020
@openoms Thank for the hint.
Using USB stick to boot maybe not such a good idea. USB stick is about a week old.
Other topic but just a thought. Will discuss this in #430 .
@adevoss on a side note, you can boot Pi direct from SSD (USB) now if you are willing to tinker.
I posted the link on another thread somewhere, will find it later.
I believe the future versions of RB will use this function.
hermanlim
on 2 Jul 2020
I believe the future versions of RB will use this function.
Looking forward to that.
@hermanlim I boot from USB thumb drive now but had to change some RB scripts to do that. See https://github.com/rootzoll/raspiblitz/pull/1297.
adevoss
on 6 Jul 2020
Related issues
intorid
·
3Comments
2000jago
·
5Comments
frennkie
·
5Comments
rootzoll
·
4Comments
openoms
·
3Comments
Most helpful comment
sorry, misleading words. Edited.
All good with RTL!