Prusa-firmware: Pause print is now BROKEN with 3.5.2.

[zkirkpp]

WARNING:

Since updating to the 3.5.2 firmware yesterday the Pause function is screwed up. I hit pause on the MK3 LCD screen 7 hours into a print and the nozzle heater turns itself off as it should but the machine CONTINUES PRINTING. I was perplexed at first and then realized it was still trying to turn the extruder gears with cold filament and continuing all its movements. Luckily I was paying attention and stopped the print before it started grinding the filament as the temp dropped. To make matters worse this was a ton of Prusament that is now wasted.

Printing on an MK3 purchased May 2018.

[inquisitiveKangaroo]

Hi, thank you for your feedback. May I ask you what printer type you are using?

[zkirkpp]

Hi, thank you for your feedback. May I ask you what printer type you are using?

Printing on an MK3 purchased May 2018.

[inquisitiveKangaroo]

Thank you, we will look on it. It sounds like high priority issue.

[inquisitiveKangaroo]

Hi,
The pause function works fine to me (tried on multiple printers). Could you provide us more info such as the g-code or even better a log where this issue appeared?

[inquisitiveKangaroo]

Maybe contact the customer support to exchange your Einsy for new one. We'd like to make further tests on yours.

[zkirkpp]

I reflashed the firmware and reset the printer to factory defaults and the
issue is resolved.

On Fri, Feb 15, 2019, 7:17 AM inquisitiveKangaroo <[email protected]
wrote:

Maybe contact the customer support to exchange your Einsy for new one.
We'd like to make further tests on yours.

—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub
https://github.com/prusa3d/Prusa-Firmware/issues/1531#issuecomment-464047340,
or mute the thread
https://github.com/notifications/unsubscribe-auth/Ar7WjsKORjq6wqUnp3Z-knN_-fJcwzlkks5vNrNcgaJpZM4a6Jp4
.

[3d-gussner]

@zkirkpp If that issue is resolved you can close the issue yourself to clean up the issue list