Openbci_gui: OpenBCI_Hub 2.0.6 not initialize in the OpenBCI_GUI 4.1.0 using Processing.

[wellton]

Problem

The OpenBCI_Hub 2.0.6 not initialize in the OpenBCI_GUI 4.1.0 using Processing.

IMPORTANT = The OpenBCI_GUI version 4.0.4 with OpenBCI_Hub 2.0.5 Works, using same procedures used in the 4.1.0

obs. I put the Hub inside folder data.

obs 2. The Hub works (third image below)

Expected

Do initialize the Hub.

Operating System and Version

Debian GNU/Linux Buster

GUI Version

4.1.0

Running standalone app

Running from Processing 3

Type of OpenBCI Board

Cyton+Daisy

Are you using a WiFi Shield?

Yes

[retiutut]

This is likely only happening on Linux.

[daniellasry]

Ah. I believe this is due to a change I made. As of 4.1.0, you need to put the hub inside a "OpenBCIHub" folder within the "data" folder. Let us know if that fixes the issue.

[wellton]

@daniellasry Hi Daniel. Yes. Its Works. =) Thank you.

[pranavsuresh7]

Hey I also face the same problem mine ubuntu version is 18.04.

[pranavsuresh7]

Fixed it by sudo apt install libgconf-2-4 ,installing this library and sudo reboot. It was issue with OpenBCI_HUB

[retiutut]

@pranavsuresh7 You are using an older version of the GUI. Please try the latest release.