Meshcentral: 0.6.95 update - lost agents
I updated to 0.6.95 (from 0.6.92 I believe). While Linux machines (Raspberry Pi Zero) came on quickly, Windows 7 machines "struggled" quite a bit - they would be appear and dissappear ~ 2 seconds later several times until the would be active steadily (took 10 minutes or so).
Windows 10 machine did not come active again at all, though. Which is unfortunate, as this machine is physically remote for me ...
baikal
All 4 comments
with this command (linux based) you can return to an previous version: npm install [email protected]
change the last digits to go the version wich worked for you.
Ypu can also try to update to the latest version 0.6.97
petervanv
on 20 Nov 2020
thank you. Will try the update first - and the downgrade if needed.
baikal
on 20 Nov 2020
I suspect it might have something to do with the new MeshAgent version being pushed to the devices as part of the update. I noticed the devices going on and off as well but attributed it to the MeshAgent getting updated. My devices all seem to be stable now.
PathfinderNetworks
on 20 Nov 2020
Turns out that someone turned off that Windows-10 machine at almost exactly the same time as my server upgrade ... sorry for the fuzz. Once turned on again, everything is normal - and updated to 0.6.97.
Although the observation of the Windows-7 machines taking quite some time to be steadily active was real - and yes @PathfinderNetworks, mine are stable since then as well.
baikal
on 20 Nov 2020
Related issues
MailYouLater
路
4Comments
penguinthingie
路
4Comments
PathfinderNetworks
路
3Comments
guerby
路
3Comments
whalehub
路
3Comments
Most helpful comment
Turns out that someone turned off that Windows-10 machine at almost exactly the same time as my server upgrade ... sorry for the fuzz. Once turned on again, everything is normal - and updated to 0.6.97.
Although the observation of the Windows-7 machines taking quite some time to be steadily active was real - and yes @PathfinderNetworks, mine are stable since then as well.