Inav: TBS Crossfire Telemetry Sensors Problem

[cliffkhew]

I had an issue with the TBS Crossfire Micro TX & Nano RX with this version.Currently using Omnibus F4 PRO V2,CRSF TX & RX to UART#1.The radio discovered sensors many are missing & some are not displaying the correct values.The previous version like 2.4.0 & older versions don't have this issue,works perfectly.

[issue-label-bot[bot]]

Issue-Label Bot is automatically applying the label BUG to this issue, with a confidence of 0.83. Please mark this comment with :thumbsup: or :thumbsdown: to give our bot feedback!

Links: app homepage, dashboard and code for this bot.

[Jetrell]

@cliffkhew I loaded 2.5.1 onto an old Omnibus F4Pro V3, that has a TBS Nano RX.
OpenTX showed that all my senors are there and they also appeared in iNav Telemetry.
Have you tried to re-run Discover sensors?

[cliffkhew]

Yes,of course need to delete all sensors and discover the sensors again for new setup.But the sensors I got are not completed.Can you confirm that the sensors are all found?The completed should have 23 sensors-RxBt,Curr,Capa,Bat_,1RSS,2RSS,RQly,RSNR,RFMD,TPWR,TRSS,TQly,TSNR,FM,GPS,GSPD,Hdg,Alt,Sats,VSpd,Ptch Roll,Yaw.

[Jetrell]

Yes. I can confirm that all the ones you have listed are being received. Although I only use 21 in total.
I also forgot to mention that I was using UART 1 as well.

[cliffkhew]

Im using Omnibus F4 PRO V2,i think V3 almost identical.It is great that u have no issue.I will try to upload 2.5.0 again to see it is working or not...btw my V3 fc just arrived will try it too.
Thks for reply,have a good flight:)

[cliffkhew]

All right,I reflashed the latest firmware v2.5.1 to my Omnibus PRO V2 board,made new configuration without diff all config.Delete all discovered sensors & discovered new sensors.23 sensors appereared completely without any issue.Thank Jetrell replied to me and encouraged to solve the issue.