I'm looking to deploy frr and EIGRP in addition to BGP on an IPv6-only network, but I discovered that frr doesn't support this.
There is Cisco documentation for implementing this: https://www.cisco.com/c/en/us/support/docs/ip/enhanced-interior-gateway-routing-protocol-eigrp/113267-eigrp-ipv6-00.html
jpds
All 4 comments
i am implementing the TLV2 along with external route support. IPv6 will come next. Made some good progress with the shelter in place orders for C19, but no promise on time frame to get it in shapte to be considered for inclusion with FRR
diivious
on 31 Mar 2020
Any Updates to EIGRP for IPV6 support? Thanks!
andyswmr714
on 18 Nov 2020
yes an (mostly) no. I have most of the TLV2.0 code in place (which is needed for ipv6 TLVs), started debugging it -then in the middle of a house move so have not gotten back to it. I have 2 weeks off in Dec and hoping to complete the coding and doing some in-depth testing. Once that is done, and I can exchange topology data, i will be able to work on the configs and routing table update.
diivious
on 18 Nov 2020
Thanks for the update!
andyswmr714
on 19 Nov 2020
Related issues
shibumi
路
5Comments
anspectrum
路
9Comments
andylemin
路
3Comments
thilse
路
7Comments
Try75
路
8Comments
Most helpful comment
i am implementing the TLV2 along with external route support. IPv6 will come next. Made some good progress with the shelter in place orders for C19, but no promise on time frame to get it in shapte to be considered for inclusion with FRR