Fluxion: No Login/Authentication Page After Connecting To Fake AP

[ghost]

---

Read the wiki?

Yes

Do you want to request a feature or report a bug?

Bug

What is the current behaviour?

Handshake Capture works perfectly, thank you, but I get to the Capture Portal and it's a shit show.
Everything works up until it's time to feed the clients the Authentication page in which to re input password for internet access.
I get no errors, everything is all brightly coloured, but when I get my phone and laptop and try to browse, all it shows is, "No internet connection" as opposed to the wonderful login page to be used to obtain their password

If the current behaviour is a bug, please provide the steps to reproduce it.

1. Run ./fluxion.sh
2. Select English
3. Select my wlan0 to place it into monitor mode
4. Monitor all channels
5. Wait a few seconds and close the monitor panel
6. Select the target network
7. Select Captive Portal (I already have a handshake file from running the Fluxion handshake attack)
8. Select the wlan again for the Captive Portal interface
   9.Select Rogue AP - hostapd
9. Point Fluxion to the captured handshake with direct pathing
10. Select Pyrit Verification
11. Select "Create an SSL certificate
12. Select the generic portal for English (7)

What do you think the expected behaviour should be?

Login/Authentication portal should open in the browser of the clients on the network.

If this is a feature request, what is the motivation or use case for the added feature?

Specs

*[ FLUXION Info ]
FLUXION V3.11

[ BASH Info ]
GNU bash, version 4.4.18(1)-release (x86_64-pc-linux-gnu)
Copyright (C) 2016 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later http://gnu.org/licenses/gpl.html

This is free software; you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
Path: /bin/bash

[ Interface (wlan0) Info ]
Device: phy0
Driver: rt2800usb
Chipset: Ralink Technology, Corp. RT2870/RT3070
Injection Test: Injection is working!

[ XTerm Info ]
Version: XTerm(331)
Path: /usr/bin/xterm
Test: XServer/XTerm success!

[ HostAPD Info ]
hostapd v2.6
User space daemon for IEEE 802.11 AP management,
IEEE 802.1X/WPA/WPA2/EAP/RADIUS Authenticator
Copyright (c) 2002-2016, Jouni Malinen [e-mail] and contributors
Path: /usr/sbin/hostapd

[ Aircrack-ng Info ]

Aircrack-ng 1.2 rc4 - (C) 2006-2015 Thomas d'Otreppe
http://www.aircrack-ng.org

[ System Info ]
Linux version 4.14.0-kali3-amd64 ([email protected]) (gcc version 7.2.0 (Debian 7.2.0-19)) #1 SMP Debian 4.14.13-1kali1 (2018-01-25)*

---

[fbownz]

Ave had the same issue, but the login screen only appears on Mobile devices.

[deltaxflux]

Does the page appear if you type it manually in your browser?

[kimyunz]

I hv a same problem

[zartaz]

I have the same issue, the only way to get pop up window in my android device is the captive portal to be connected not emulated either dnsspoofed

[deltaxflux]

Removed because it violate fluxion terms.

[kimyunz]

Fix that issue doesnot appear login page....

[deltaxflux]

I recommend that you don't use fluxion. I guess you try these thinks at the first time. You should start manually.

[hearthacker1]

i have same problem like my friends .that the fluxion 4 not showing at last the login page and now run forward from the
Select the generic portal for English (7)
please help us

[fbownz]

Update. Update to fluxion 4.4 it helped

[hearthacker1]

thinks for give me a such a kind of information , but i update the fluxion
to 4.0 and the can't make a fake wifi
the fluxion tool are going to stuck in last step when i making the fake
wifi
please help me to resolve this issue again

On Thu, Mar 22, 2018 at 9:27 PM, Morgan E [e-mail] wrote:

Update. Update to fluxion 4.4 it helped

—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub
https://github.com/FluxionNetwork/fluxion/issues/397#issuecomment-375369596,
or mute the thread
https://github.com/notifications/unsubscribe-auth/Aj2-wYmUSKycbfWt_Iz-ikm69C6Y997Tks5tg9EDgaJpZM4SJj_1
.

[hearthacker1]

i am still waiting for your response . Help me to resolve this problem

On Sun, Mar 25, 2018 at 9:38 AM, Khalid Khan [e-mail]
wrote:

thinks for give me a such a kind of information , but i update the fluxion
to 4.0 and the can't make a fake wifi
the fluxion tool are going to stuck in last step when i making the fake
wifi
please help me to resolve this issue again

On Thu, Mar 22, 2018 at 9:27 PM, Morgan E [e-mail]
wrote:

Update. Update to fluxion 4.4 it helped

—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub
https://github.com/FluxionNetwork/fluxion/issues/397#issuecomment-375369596,
or mute the thread
https://github.com/notifications/unsubscribe-auth/Aj2-wYmUSKycbfWt_Iz-ikm69C6Y997Tks5tg9EDgaJpZM4SJj_1
.

[usama7628674]

@hearthacker1 Plug your wireless adapter and post the output of the following
airmon-ng

[hearthacker1]

can't understand what your want to tell me . please tell clear step by step
to resolve problem

On Sun, Mar 25, 2018 at 2:52 PM, Usama Abdul Sattar <
[email protected]> wrote:

@hearthacker1 https://github.com/hearthacker1 Plug your wireless
adapter and post the output of the following
airmon-ng

—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub
https://github.com/FluxionNetwork/fluxion/issues/397#issuecomment-375958178,
or mute the thread
https://github.com/notifications/unsubscribe-auth/Aj2-wcLeniGdf3rCT65-oOPDf9aiJo8Lks5th2jagaJpZM4SJj_1
.

[hearthacker1]

( airmon-ng ) what to ( start or stop) or what command i give with
airmon-ng .
thanks for giving me your presious time

On Sun, Mar 25, 2018 at 3:08 PM, Khalid Khan [e-mail]
wrote:

can't understand what your want to tell me . please tell clear step by
step to resolve problem

On Sun, Mar 25, 2018 at 2:52 PM, Usama Abdul Sattar <
[email protected]> wrote:

@hearthacker1 https://github.com/hearthacker1 Plug your wireless
adapter and post the output of the following
airmon-ng

—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub
https://github.com/FluxionNetwork/fluxion/issues/397#issuecomment-375958178,
or mute the thread
https://github.com/notifications/unsubscribe-auth/Aj2-wcLeniGdf3rCT65-oOPDf9aiJo8Lks5th2jagaJpZM4SJj_1
.

[usama7628674]

@hearthacker1 Just put the command in terminal after plugging your wireless adapter.

[hearthacker1]

Ok i did this step but still can't working . Bro tell me this is working
online or offline
On 25 Mar 2018 15:16, "Usama Abdul Sattar" [e-mail] wrote:

@hearthacker1 https://github.com/hearthacker1 Just put the command in
terminal after plugging your wireless adapter.

—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub
https://github.com/FluxionNetwork/fluxion/issues/397#issuecomment-375959384,
or mute the thread
https://github.com/notifications/unsubscribe-auth/Aj2-wYMEkZ6JmXftHzXEaVg3AupGg0mKks5th25ygaJpZM4SJj_1
.

[hearthacker1]

i do the this step but can't working

On Tue, 27 Mar 2018 11:39 AM Khalid Khan, [e-mail]
wrote:

Ok i did this step but still can't working . Bro tell me this is working
online or offline
On 25 Mar 2018 15:16, "Usama Abdul Sattar" [e-mail]
wrote:

@hearthacker1 https://github.com/hearthacker1 Just put the command in
terminal after plugging your wireless adapter.

—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub
https://github.com/FluxionNetwork/fluxion/issues/397#issuecomment-375959384,
or mute the thread
https://github.com/notifications/unsubscribe-auth/Aj2-wYMEkZ6JmXftHzXEaVg3AupGg0mKks5th25ygaJpZM4SJj_1
.

[deltaxflux]

I don't think that you should use fluxion.

[hearthacker1]

why not bro see in this screen shot . this is a screen shot when i crack my
wifi and they struck on this page . i give 30 minutes but can't working
​
​

On Wed, Mar 28, 2018 at 5:46 PM, deltax [e-mail] wrote:

I don't think that you should use fluxion.

—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub
https://github.com/FluxionNetwork/fluxion/issues/397#issuecomment-376873583,
or mute the thread
https://github.com/notifications/unsubscribe-auth/Aj2-waZ6gnuSIkTVajutoqp2ZRIWp2Avks5ti4YhgaJpZM4SJj_1
.

[hearthacker1]

when i check the fluxion 4.4 on my friend wifi network they little bittle
work and can't get clinet and passoword . like this screen shots
​
​

[hearthacker1]

please help me to learn this software and thanks for all comments

On Wed, Mar 28, 2018 at 8:23 PM, Khalid Khan [e-mail]
wrote:

when i check the fluxion 4.4 on my friend wifi network they little bittle
work and can't get clinet and passoword . like this screen shots
​
​

[deltaxflux]

Bullshit, stop beeing annoying or I ban you.

[hearthacker1]

No. no , cool my friend . i am just trying to solve my issues . i don't
want to give anger /
and if i give a you some disheart please forgive me.ok

On Wed, Mar 28, 2018 at 9:48 PM, deltax [e-mail] wrote:

Bullshit, stop beeing annoying or I ban you.

—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub
https://github.com/FluxionNetwork/fluxion/issues/397#issuecomment-376956034,
or mute the thread
https://github.com/notifications/unsubscribe-auth/Aj2-wf5Enj_jy1_Kr0UcSA6lLRW8Lyowks5ti77egaJpZM4SJj_1
.

[hearthacker1]

and these are my last issues .i am trying to solve these error . i can't
give up now

On Wed, Mar 28, 2018 at 10:13 PM, Khalid Khan [e-mail]
wrote:

No. no , cool my friend . i am just trying to solve my issues . i don't
want to give anger /
and if i give a you some disheart please forgive me.ok

On Wed, Mar 28, 2018 at 9:48 PM, deltax [e-mail] wrote:

Bullshit, stop beeing annoying or I ban you.

—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub
https://github.com/FluxionNetwork/fluxion/issues/397#issuecomment-376956034,
or mute the thread
https://github.com/notifications/unsubscribe-auth/Aj2-wf5Enj_jy1_Kr0UcSA6lLRW8Lyowks5ti77egaJpZM4SJj_1
.

[dominicon-x]

i have same problem..

[manuele16]

Hi guys, I'm not an expert on the subject but I also have the same problem with Fluxion 4.12, with version 2 the page opens me, but with the 2 I have other problems that I do not have with 4.12.

[joentpn]

FLUXION Info

FLUXION V5.2

BASH Info

GNU bash, version 4.4.23(1)-release (x86_64-pc-linux-gnu)
Copyright (C) 2016 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later http://gnu.org/licenses/gpl.html

This is free software; you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
Path: /bin/bash

Interface (wlan1) Info

Device: phy1
Driver: rt2800usb
Chipset: Ralink Technology, Corp. RT5370
Master Modes Yes
Injection Test: ioctl(SIOCSIWMODE) failed: Device or resource busy
Injection is working!

XTerm Infos

Version: XTerm(333)
Path: /usr/bin/xterm
Test: XServer/XTerm success!

HostAPD Info

hostapd v2.6
User space daemon for IEEE 802.11 AP management,
IEEE 802.1X/WPA/WPA2/EAP/RADIUS Authenticator
Copyright (c) 2002-2016, Jouni Malinen [e-mail] and contributors
Path: /usr/sbin/hostapd

Aircrack-ng Info

EXIT
(null) - (C) 2006-2018 Thomas d'Otreppe
https://www.aircrack-ng.org

Pyrit Info

Pyrit 0.5.1 (C) 2008-2011 Lukas Lueg - 2015 John Mora
https://github.com/JPaulMora/Pyrit
This code is distributed under the GNU General Public License v3+
Scapy Version: 2.4.0
Warning: Pyrit has been reported to be incompatible with scapy version 2.4.0 and above. Consult the wiki for further information. This should not affect you, if you don't choose to use pyrit in the script.

System Info

Chipset: Linux version 4.17.0-kali1-amd64 ([email protected]) (gcc version 7.3.0 (Debian 7.3.0-25)) #1 SMP Debian 4.17.8-1kali1 (2018-07-24)

Chipset

Chipset: rt2800usb
Chipset support ap mode
Chipset support monitor mode
Don't reseve all required information

[joentpn]

when connecting to the fake AP without a password, it is not possible to establish a connection, when it connects, the password request page does not appear for verification. Can someone help me?

[sreenathpradeep]

I have the same issue with fluxion v5.7

I'll try describing as much as i can.
ISSUE: I had previously used fluxion 0.24 and everything worked fine on my kali linux (2017.1) on a lenovo g580 laptop.
But now everything works fine until I launch the fake AP,my samsung j7 doesn't show the"SIGN IN TO WIFI" pop-up bu i can visit the login page by manually entering the ip address in the browser.

I'm using fluxion v5.7 now with kali rolling 2019.1 but still the issues remains i.e. android device doesn't show a pop up showing 'SIGN IN TO THIS NETWORK' but works if i enter IP address manually.
now evil twin attack is not working just because the victim is not redirected to the login page.

I hope you guys would do a bit more research on this.
I assume that android updates are the reason for this, and they just overcame the vulnerability.

regards!

[Tarek-Adra]

any updates ?