Ems-esp: VSC - PlatformIO building error

Created on 28 Sep 2018  Â·  43Comments  Â·  Source: proddy/EMS-ESP

Hi Paul,

I am trying to build d1_mini firmware on PlatformIO according to your procedure and platformio.ini-example but unfortunately I am getting an error message below. Do you know what could be the issue ? "class "Ticker" has no member "attach"

Executing task: C:\Users\tomas.platformio\penv\Scripts\platformio.exe run --target upload <

Processing nodemcuv2 (platform: espressif8266; board: nodemcuv2; framework: arduino)

PackageManager: Installing tool-mkspiffs @ ~1.200.0
Downloading [####################################] 100%
Unpacking [####################################] 100%
PackageManager: Installing tool-espotapy @ ~1.1.0
Downloading [####################################] 100%
Unpacking [####################################] 100%
Verbose mode can be enabled via -v, --verbose option
PLATFORM: Espressif 8266 > NodeMCU 1.0 (ESP-12E Module)
SYSTEM: ESP8266 80MHz 80KB RAM (4MB Flash)
Converting boiler.ino
Library Dependency Finder -> http://bit.ly/configure-pio-ldf
LDF MODES: FINDER(chain) COMPATIBILITY(soft)
Collected 34 compatible libraries
Scanning dependencies...
Dependency Graph
|--

^C
ompiling .pioenvs\nodemcuv2\libef2\ESP8266WiFi\ESP8266WiFiSTA.cpp.oC
:/Users/tomas/EMS-ESP-Boiler/src/boiler.ino:65:8: note: candidates are:Compiling .pioenvs\nodemcuv2\libef2\ESP8266WiFi\ESP8266WiFiScan.cpp.o

In file included from C:/Users/tomas/EMS-ESP-Boiler/src/boiler.ino:37:0:
C:\Users\tomas.platformio\lib\Ticker_ID1586/Ticker.h:61:2: note: Ticker::Ticker(fptr, uint32_t, uint16_t, resolution_t)
Ticker(fptr callback, uint32_t timer, uint16_t repeat = 0, resolution_t resolution = MICROS);
^
C:\Users\tomas.platformio\lib\Ticker_ID1586/Ticker.h:61:2: note: candidate expects 4 arguments, 0 provided
C:\Users\tomas.platformio\lib\Ticker_ID1586/Ticker.h:49:7: note: constexpr Ticker::Ticker(const Ticker&)
class Ticker {
^
C:\Users\tomas.platformio\lib\Ticker_ID1586/Ticker.h:49:7: note: candidate expects 1 argument, 0 provided
C:/Users/tomas/EMS-ESP-Boiler/src/boiler.ino:67:8: error: no matching function for call to 'Ticker::Ticker()'

define HOSTNAME "raspberrypi"

^
C:/Users/tomas/EMS-ESP-Boiler/src/boiler.ino:67:8: note: candidates are:
In file included from C:/Users/tomas/EMS-ESP-Boiler/src/boiler.ino:37:0:
C:\Users\tomas.platformio\lib\Ticker_ID1586/Ticker.h:61:2: note: Ticker::Ticker(fptr, uint32_t, uint16_t, resolution_t)
Ticker(fptr callback, uint32_t timer, uint16_t repeat = 0, resolution_t resolution = MICROS);
^
C:\Users\tomas.platformio\lib\Ticker_ID1586/Ticker.h:61:2: note: candidate expects 4 arguments, 0 provided
C:\Users\tomas.platformio\lib\Ticker_ID1586/Ticker.h:49:7: note: constexpr Ticker::Ticker(const Ticker&)
class Ticker {
^
C:\Users\tomas.platformio\lib\Ticker_ID1586/Ticker.h:49:7: note: candidate expects 1 argument, 0 provided
C:/Users/tomas/EMS-ESP-Boiler/src/boiler.ino:69:8: error: no matching function for call to 'Ticker::Ticker()'
// app specific - do not change
^
C:/Users/tomas/EMS-ESP-Boiler/src/boiler.ino:69:8: note: candidates are:
In file included from C:/Users/tomas/EMS-ESP-Boiler/src/boiler.ino:37:0:
C:\Users\tomas.platformio\lib\Ticker_ID1586/Ticker.h:61:2: note: Ticker::Ticker(fptr, uint32_t, uint16_t, resolution_t)
Ticker(fptr callback, uint32_t timer, uint16_t repeat = 0, resolution_t resolution = MICROS);
^
C:\Users\tomas.platformio\lib\Ticker_ID1586/Ticker.h:61:2: note: candidate expects 4 arguments, 0 provided
C:\Users\tomas.platformio\lib\Ticker_ID1586/Ticker.h:49:7: note: constexpr Ticker::Ticker(const Ticker&)
class Ticker {
^
C:\Users\tomas.platformio\lib\Ticker_ID1586/Ticker.h:49:7: note: candidate expects 1 argument, 0 provided
C:/Users/tomas/EMS-ESP-Boiler/src/boiler.ino:71:8: error: no matching function for call to 'Ticker::Ticker()'

define TOPIC_START MQTT_BOILER MQTT_TOPIC_START

^
C:/Users/tomas/EMS-ESP-Boiler/src/boiler.ino:71:8: note: candidates are:
In file included from C:/Users/tomas/EMS-ESP-Boiler/src/boiler.ino:37:0:
C:\Users\tomas.platformio\lib\Ticker_ID1586/Ticker.h:61:2: note: Ticker::Ticker(fptr, uint32_t, uint16_t, resolution_t)
Ticker(fptr callback, uint32_t timer, uint16_t repeat = 0, resolution_t resolution = MICROS);
^
C:\Users\tomas.platformio\lib\Ticker_ID1586/Ticker.h:61:2: note: candidate expects 4 arguments, 0 provided
C:\Users\tomas.platformio\lib\Ticker_ID1586/Ticker.h:49:7: note: constexpr Ticker::Ticker(const Ticker&)
class Ticker {
^
C:\Users\tomas.platformio\lib\Ticker_ID1586/Ticker.h:49:7: note: candidate expects 1 argument, 0 provided
C:/Users/tomas/EMS-ESP-Boiler/src/boiler.ino:73:8: error: no matching function for call to 'Ticker::Ticker()'

define TOPIC_THERMOSTAT_TEMP MQTT_BOILER "thermostat_temp" // for received thermostat temp changes

^
C:/Users/tomas/EMS-ESP-Boiler/src/boiler.ino:73:8: note: candidates are:
In file included from C:/Users/tomas/EMS-ESP-Boiler/src/boiler.ino:37:0:
C:\Users\tomas.platformio\lib\Ticker_ID1586/Ticker.h:61:2: note: Ticker::Ticker(fptr, uint32_t, uint16_t, resolution_t)
Ticker(fptr callback, uint32_t timer, uint16_t repeat = 0, resolution_t resolution = MICROS);
^
C:\Users\tomas.platformio\lib\Ticker_ID1586/Ticker.h:61:2: note: candidate expects 4 arguments, 0 provided
C:\Users\tomas.platformio\lib\Ticker_ID1586/Ticker.h:49:7: note: constexpr Ticker::Ticker(const Ticker&)
class Ticker {
^
C:\Users\tomas.platformio\lib\Ticker_ID1586/Ticker.h:49:7: note: candidate expects 1 argument, 0 provided
C:/Users/tomas/EMS-ESP-Boiler/src/boiler.ino:87:5: error: expected unqualified-id before string constant
// default values
^
C:/Users/tomas/EMS-ESP-Boiler/src/boiler.ino: In function 'void setup()':
C:/Users/tomas/EMS-ESP-Boiler/src/boiler.ino:1345:20: error: 'class Ticker' has no member named 'attach'
C:/Users/tomas/EMS-ESP-Boiler/src/boiler.ino:1353:24: error: 'class Ticker' has no member named 'attach'
C:/Users/tomas/EMS-ESP-Boiler/src/boiler.ino:1355:22: error: 'class Ticker' has no member named 'attach'
C:/Users/tomas/EMS-ESP-Boiler/src/boiler.ino:1357:25: error: 'class Ticker' has no member named 'attach'
C:/Users/tomas/EMS-ESP-Boiler/src/boiler.ino:1391:50: error: no matching function for call to 'ESPHelper::consoleSetHelpProjectsCmds()'
C:/Users/tomas/EMS-ESP-Boiler/src/boiler.ino:1391:50: note: candidate is:
In file included from C:/Users/tomas/EMS-ESP-Boiler/src/boiler.ino:19:0:
src\ESPHelper.h:80:12: note: void ESPHelper::consoleSetHelpProjectsCmds(String)
void consoleSetHelpProjectsCmds(String help);
^
src\ESPHelper.h:80:12: note: candidate expects 1 argument, 0 provided
C:/Users/tomas/EMS-ESP-Boiler/src/boiler.ino: In function 'void _showerColdShotStart()':
C:/Users/tomas/EMS-ESP-Boiler/src/boiler.ino:1527:29: error: 'class Ticker' has no member named 'attach'
C:/Users/tomas/EMS-ESP-Boiler/src/boiler.ino: In function 'void _showerColdShotStop()':
C:/Users/tomas/EMS-ESP-Boiler/src/boiler.ino:1545:33: error: 'class Ticker' has no member named 'detach'
C:/Users/tomas/EMS-ESP-Boiler/src/boiler.ino: In function 'void loop()':
C:/Users/tomas/EMS-ESP-Boiler/src/boiler.ino:1725:98: error: 'SHOWER_PAUSE_TIME' was not declared in this scope
* [.pioenvs\nodemcuv2\src\boiler.ino.cpp.o] Error 1
=============================================================================================== [ERROR] Took 7.20 seconds ===============================================================================================

======================================================================================================= [SUMMARY] =======================================================================================================
Environment nodemcuv2 [ERROR]
Environment d1_mini [SKIP]
=============================================================================================== [ERROR] Took 7.21 seconds ===============================================================================================
The terminal process terminated with exit code: 1

Terminal will be reused by tasks, press any key to close it.

picture blacksocket

All 43 comments

Ticker is a standard library is standard in the ESP8266/Arduno (see https://github.com/esp8266/Arduino/tree/master/libraries/Ticker). It looks like your PlatformIO has gone and grabbed https://github.com/sstaub/Ticker. Check your platformio.ini, scrub your .piolibdeps and try again.

proddy picture proddy on 28 Sep 2018

Hi Paul,
Thank you for the quick answer! ;-) I removed all additional libs from PIO and leave only these described in platformio.ini provided by you namely:
lib_deps =
Time
PubSubClient
ArduinoJson
and additional CRC2 because I have got a message about that.

Now I am getting the errors below. Maybe you have some updates regarding boiler.ino and ESPHelper.cpp ?

Executing task: C:\Users\tomas.WINDOWS-9P5QTO1.platformio\penv\Scripts\platformio.exe run <

Processing d1_mini (platform: espressif8266; board: d1_mini; framework: arduino)

Verbose mode can be enabled via -v, --verbose option
PLATFORM: Espressif 8266 > WeMos D1 R2 & mini
SYSTEM: ESP8266 80MHz 80KB RAM (4MB Flash)
Converting boiler.ino
Library Dependency Finder -> http://bit.ly/configure-pio-ldf
LDF MODES: FINDER(chain) COMPATIBILITY(soft)
Collected 33 compatible libraries
Scanning dependencies...
Dependency Graph
|--

======================================================================================================= [SUMMARY] =======================================================================================================
Environment nodemcuv2 [SKIP]
Environment d1_mini [ERROR]
============================================================================================== [ERROR] Took 12.50 seconds ==============================================================================================
The terminal process terminated with exit code: 1

Terminal will be reused by tasks, press any key to close it.

blacksocket picture blacksocket on 28 Sep 2018

Ah, I've seen this problem before on non-US locales. It may be the backslashes tripping up the compiler in the PROJECT_CMDS definition. There's a few open issues on this topic. Try making it a single line and see if that compiles correctly. For example in boiler.ino
#define PROJECT_CMDS " test "

proddy picture proddy on 28 Sep 2018

I removed all backslashes from the #define PROJECT_CMDS definition and nothing changed. The same error in:
"C:/Users/tomas.WINDOWS-9P5QTO1/EMS-ESP-Boiler/src/boiler.ino:87:5: error: expected unqualified-id before string constant // default values"

Line 87 and next:

// default values
// thermostat support, shower timing and shower alert all enabled (1) (disabled = 0)

define BOILER_THERMOSTAT_ENABLED 1

define BOILER_SHOWER_TIMER 1

define BOILER_SHOWER_ALERT 0

// logging - EMS_SYS_LOGGING_VERBOSE, EMS_SYS_LOGGING_NONE, EMS_SYS_LOGGING_BASIC (see ems.h)

define BOILER_DEFAULT_LOGGING EMS_SYS_LOGGING_NONE

// shower settings

ifndef SHOWER_TEST

const unsigned long SHOWER_PAUSE_TIME = 15000; // 15 seconds, max time if water is switched off & on during a shower
const unsigned long SHOWER_MIN_DURATION = 180000; // 3 minutes, before recognizing its a shower
const unsigned long SHOWER_MAX_DURATION = 420000; // 7 minutes, before trigger a shot of cold water
const unsigned long SHOWER_COLDSHOT_DURATION = 5; // 5 seconds for cold water - note, must be in seconds
const unsigned long SHOWER_OFFSET_TIME = 8000; // 8 seconds grace time, to calibrate actual time under the shower

else

// for DEBUGGING only
const unsigned long SHOWER_PAUSE_TIME = 15000; // 15 seconds, max time if water is switched off & on during a shower
const unsigned long SHOWER_MIN_DURATION = 20000; // 20 secs, before recognizing its a shower
const unsigned long SHOWER_MAX_DURATION = 25000; // 25 secs, before trigger a shot of cold water
const unsigned long SHOWER_COLDSHOT_DURATION = 5; // in seconds! how long for cold water shot
const unsigned long SHOWER_OFFSET_TIME = 0; // 0 seconds grace time, to calibrate actual time under the shower

endif

blacksocket picture blacksocket on 28 Sep 2018

sorry no idea what the problem could be. The code is very simple, so try process of elimination until you find which line or code block is causing the errors.

proddy picture proddy on 28 Sep 2018

Seems there are a lot of differences between the code from last update. I will try to fix it - need to drink some wine during the weekend with this code ;-). However I am not very familiar with programing, so If you can provide me the whole content of your VSC EMS-ESP-Boiler folder then for sure it helps. Thank you Paul for your time and help! ;-)
image

blacksocket picture blacksocket on 28 Sep 2018

Hi Paul, I have found that there is something wrong with the // public libraries defined in boiler.ino and these defined in platformio.ini. - lib_deps. Could you please reupload all the files used in platformio project building especially platformio.ini ?
platformio.ini:
lib_deps =
Time
PubSubClient
ArduinoJson

I added the "PubSubClient" library defined in boiler.ino code below
// public libraries

include // https://github.com/bblanchon/ArduinoJson

include // https://github.com/bakercp/CRC32

include

Now the errors are gone but have new one below:

Executing task in folder EMS-ESP-Boiler: C:\Users\tomas.WINDOWS-9P5QTO1.platformio\penv\Scripts\platformio.exe run <

Processing d1_mini (platform: espressif8266; board: d1_mini; framework: arduino)

Verbose mode can be enabled via -v, --verbose option
PLATFORM: Espressif 8266 > WeMos D1 R2 & mini
SYSTEM: ESP8266 80MHz 80KB RAM (4MB Flash)
Converting boiler.ino
Library Dependency Finder -> http://bit.ly/configure-pio-ldf
LDF MODES: FINDER(chain) COMPATIBILITY(soft)
Collected 37 compatible libraries
Scanning dependencies...
Dependency Graph
|--

======================================================================================================= [SUMMARY] =======================================================================================================
Environment nodemcuv2 [SKIP]
Environment d1_mini [ERROR]
============================================================================================== [ERROR] Took 30.85 seconds ==============================================================================================
The terminal process terminated with exit code: 1

Terminal will be reused by tasks, press any key to close it.

blacksocket picture blacksocket on 29 Sep 2018

I'm not sure why its not working. I took a new laptop with windows10,
installed VSCode and Platformio, downloaded the files from my GitHub and it
builds correctly. PlatforrmIO should be able to find the correct libraries
and download them. Which OS are you running on?

On Sat, Sep 29, 2018 at 8:04 PM blacksocket notifications@github.com
wrote:

Hi Paul, I have found that there is something wrong with the // public
libraries and defined in platformio.ini. lib_deps. Could you please
reupload all the files used in platformio project building especially
platformio.ini ?

I added the library defined in boiler.ino code below
// public libraries

include // https://github.com/bblanchon/ArduinoJson

include // https://github.com/bakercp/CRC32

*#include *
Now the errors are gone but have new one below:

Executing task in folder EMS-ESP-Boiler:
C:\Users\tomas.WINDOWS-9P5QTO1.platformio\penv\Scripts\platformio.exe run <

Processing d1_mini (platform: espressif8266; board: d1_mini; framework:
arduino)

Verbose mode can be enabled via -v, --verbose option
PLATFORM: Espressif 8266 > WeMos D1 R2 & mini
SYSTEM: ESP8266 80MHz 80KB RAM (4MB Flash)
Converting boiler.ino
Library Dependency Finder -> http://bit.ly/configure-pio-ldf
LDF MODES: FINDER(chain) COMPATIBILITY(soft)
Collected 37 compatible libraries
Scanning dependencies...
Dependency Graph
|-- 1.5
|-- 2.6
|-- 5.13.2
|-- 1.0
|-- 2.0.0
|-- 1.0
| |-- 1.0
| |--
| | |-- 1.0
|--
| |-- 1.0
|-- 3.1.4
Compiling .pioenvs\d1_mini\src\ESPHelper.cpp.o
Compiling .pioenvs\d1_mini\src\ems.cpp.o
Compiling .pioenvs\d1_mini\src\emsuart.cpp.o
Generating LD script .pioenvs\d1_mini\ld\eagle.app.v6.common.ld
Compiling .pioenvs\d1_mini\lib784\Time_ID44\DateStrings.cpp.o
Compiling .pioenvs\d1_mini\lib784\Time_ID44\Time.cpp.o
Compiling .pioenvs\d1_mini\libd19\PubSubClient_ID89\PubSubClient.cpp.o
Archiving .pioenvs\d1_mini\lib35b\libArduinoJson_ID64.a
Compiling .pioenvs\d1_mini\libef2\ESP8266WiFi\BearSSLHelpers.cpp.o
Compiling .pioenvs\d1_mini\libef2\ESP8266WiFi\CertStoreBearSSL.cpp.o
Archiving .pioenvs\d1_mini\lib784\libTime_ID44.a
Archiving .pioenvs\d1_mini\libd19\libPubSubClient_ID89.a
Compiling .pioenvs\d1_mini\libef2\ESP8266WiFi\ESP8266WiFi.cpp.o
Compiling .pioenvs\d1_mini\libef2\ESP8266WiFi\ESP8266WiFiAP.cpp.o
Compiling .pioenvs\d1_mini\libef2\ESP8266WiFi\ESP8266WiFiGeneric.cpp.o
Compiling .pioenvs\d1_mini\libef2\ESP8266WiFi\ESP8266WiFiMulti.cpp.o
Compiling .pioenvs\d1_mini\libef2\ESP8266WiFi\ESP8266WiFiSTA.cpp.o
Compiling .pioenvs\d1_mini\libef2\ESP8266WiFi\ESP8266WiFiScan.cpp.o
Compiling .pioenvs\d1_mini\libef2\ESP8266WiFi\WiFiClient.cpp.o
Compiling .pioenvs\d1_mini\libef2\ESP8266WiFi\WiFiClientSecureAxTLS.cpp.o
Compiling .pioenvs\d1_mini\libef2\ESP8266WiFi\WiFiClientSecureBearSSL.cpp.o
Compiling .pioenvs\d1_mini\libef2\ESP8266WiFi\WiFiServer.cpp.o
Compiling .pioenvs\d1_mini\libef2\ESP8266WiFi\WiFiServerSecureAxTLS.cpp.o
Compiling .pioenvs\d1_mini\libef2\ESP8266WiFi\WiFiServerSecureBearSSL.cpp.o
Compiling .pioenvs\d1_mini\libef2\ESP8266WiFi\WiFiUdp.cpp.o
Compiling .pioenvs\d1_mini\lib56c\CRC32\CRC32.cpp.o
Compiling .pioenvs\d1_mini\lib402\ESP8266mDNS\ESP8266mDNS.cpp.o
Compiling .pioenvs\d1_mini\libbe9\ArduinoOTA\ArduinoOTA.cpp.o
Archiving .pioenvs\d1_mini\libef2\libESP8266WiFi.a
Compiling .pioenvs\d1_mini\lib15a\Ticker_ID1586\Ticker.cpp.o
Archiving .pioenvs\d1_mini\lib56c\libCRC32.a
Archiving .pioenvs\d1_mini\libFrameworkArduinoVariant.a
Compiling .pioenvs\d1_mini\FrameworkArduino\Esp-version.cpp.o
Archiving .pioenvs\d1_mini\lib15a\libTicker_ID1586.a
Compiling .pioenvs\d1_mini\FrameworkArduino\Esp.cpp.o
Archiving .pioenvs\d1_mini\libbe9\libArduinoOTA.a
Compiling .pioenvs\d1_mini\FrameworkArduino\FS.cpp.o
Compiling .pioenvs\d1_mini\FrameworkArduino\FunctionalInterrupt.cpp.o
Archiving .pioenvs\d1_mini\lib402\libESP8266mDNS.a
Compiling .pioenvs\d1_mini\FrameworkArduino\HardwareSerial.cpp.o
Compiling .pioenvs\d1_mini\FrameworkArduino\IPAddress.cpp.o
Compiling .pioenvs\d1_mini\FrameworkArduino\MD5Builder.cpp.o
Compiling .pioenvs\d1_mini\FrameworkArduino\Print.cpp.o
Compiling .pioenvs\d1_mini\FrameworkArduino\Schedule.cpp.o
Compiling .pioenvs\d1_mini\FrameworkArduino\ScheduledFunctions.cpp.o
Compiling .pioenvs\d1_mini\FrameworkArduino\Stream.cpp.o
Compiling .pioenvs\d1_mini\FrameworkArduino\StreamString.cpp.o
Compiling .pioenvs\d1_mini\FrameworkArduino\Tone.cpp.o
Compiling .pioenvs\d1_mini\FrameworkArduino\Updater.cpp.o
Compiling .pioenvs\d1_mini\FrameworkArduino\WMath.cpp.o
Compiling .pioenvs\d1_mini\FrameworkArduino\WString.cpp.o
Compiling .pioenvs\d1_mini\FrameworkArduino\abi.cpp.o
Compiling .pioenvs\d1_mini\FrameworkArduino\base64.cpp.o
Compiling .pioenvs\d1_mini\FrameworkArduino\cbuf.cpp.o
Compiling .pioenvs\d1_mini\FrameworkArduino\cont.S.o
Compiling .pioenvs\d1_mini\FrameworkArduino\cont_util.c.o
Compiling .pioenvs\d1_mini\FrameworkArduino\core_esp8266_eboot_command.c.o
Compiling .pioenvs\d1_mini\FrameworkArduino\core_esp8266_flash_utils.c.o
Compiling .pioenvs\d1_mini\FrameworkArduino\core_esp8266_i2s.c.o
Compiling .pioenvs\d1_mini\FrameworkArduino\core_esp8266_main.cpp.o
Compiling .pioenvs\d1_mini\FrameworkArduino\core_esp8266_noniso.c.o
Compiling .pioenvs\d1_mini\FrameworkArduino\core_esp8266_phy.c.o
Compiling .pioenvs\d1_mini\FrameworkArduino\core_esp8266_postmortem.c.o
Compiling .pioenvs\d1_mini\FrameworkArduino\core_esp8266_si2c.c.o
Compiling .pioenvs\d1_mini\FrameworkArduino\core_esp8266_sigma_delta.c.o
Compiling .pioenvs\d1_mini\FrameworkArduino\core_esp8266_timer.c.o
Compiling .pioenvs\d1_mini\FrameworkArduino\core_esp8266_waveform.c.o
Compiling .pioenvs\d1_mini\FrameworkArduino\core_esp8266_wiring.c.o
Compiling .pioenvs\d1_mini\FrameworkArduino\core_esp8266_wiring_analog.c.o
Compiling .pioenvs\d1_mini\FrameworkArduino\core_esp8266_wiring_digital.c.o
Compiling .pioenvs\d1_mini\FrameworkArduino\core_esp8266_wiring_pulse.c.o
Compiling .pioenvs\d1_mini\FrameworkArduino\core_esp8266_wiring_pwm.c.o
Compiling .pioenvs\d1_mini\FrameworkArduino\core_esp8266_wiring_shift.c.o
Compiling .pioenvs\d1_mini\FrameworkArduino\debug.cpp.o
Compiling .pioenvs\d1_mini\FrameworkArduino\gdb_hooks.c.o
Compiling .pioenvs\d1_mini\FrameworkArduino\heap.c.o
Compiling .pioenvs\d1_mini\FrameworkArduino\libb64\cdecode.c.o
Compiling .pioenvs\d1_mini\FrameworkArduino\libb64\cencode.c.o
Compiling .pioenvs\d1_mini\FrameworkArduino\libc_replacements.c.o
Compiling .pioenvs\d1_mini\FrameworkArduino\pgmspace.cpp.o
Compiling .pioenvs\d1_mini\FrameworkArduino\sntp-lwip2.c.o
Compiling .pioenvs\d1_mini\FrameworkArduino\spiffs\spiffs_cache.c.o
Compiling .pioenvs\d1_mini\FrameworkArduino\spiffs\spiffs_check.c.o
Compiling .pioenvs\d1_mini\FrameworkArduino\spiffs\spiffs_gc.c.o
Compiling .pioenvs\d1_mini\FrameworkArduino\spiffs\spiffs_hydrogen.c.o
Compiling .pioenvs\d1_mini\FrameworkArduino\spiffs\spiffs_nucleus.c.o
Compiling .pioenvs\d1_mini\FrameworkArduino\spiffs_api.cpp.o
Compiling .pioenvs\d1_mini\FrameworkArduino\spiffs_hal.cpp.o
Compiling .pioenvs\d1_mini\FrameworkArduino\time.c.o
Compiling .pioenvs\d1_mini\FrameworkArduino\uart.c.o
Compiling .pioenvs\d1_mini\FrameworkArduino\umm_malloc\umm_malloc.c.o
Archiving .pioenvs\d1_mini\libFrameworkArduino.a
Linking .pioenvs\d1_mini\firmware.elf
.pioenvs\d1_mini\libFrameworkArduino.a(core_esp8266_main.cpp.o):(.text._ZL12loop_wrapperv+0x4):
undefined reference to setup'
.pioenvs\d1_mini\libFrameworkArduino.a(core_esp8266_main.cpp.o):(.text._ZL12loop_wrapperv+0x8):
undefined reference toloop'

.pioenvs\d1_mini\libFrameworkArduino.a(core_esp8266_main.cpp.o): In
function loop_wrapper()':
core_esp8266_main.cpp:(.text._ZL12loop_wrapperv+0x21): undefined reference
tosetup' core_esp8266_main.cpp:(.text._ZL12loop_wrapperv+0x2d): undefined
reference to `loop'
collect2.exe: error: ld returned 1 exit status

* [.pioenvs\d1_mini\firmware.elf] Error 1

[ERROR] Took 30.81 seconds

=======================================================================================================

[SUMMARY]

Environment nodemcuv2 [SKIP]

Environment d1_mini [ERROR]

[ERROR] Took 30.85 seconds

The terminal process terminated with exit code: 1

Terminal will be reused by tasks, press any key to close it.

—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub
https://github.com/proddy/EMS-ESP-Boiler/issues/4#issuecomment-425664435,
or mute the thread
https://github.com/notifications/unsubscribe-auth/ABLHeC-nNYbSOsNub6cUuMfuLA_HQW70ks5uf7Y1gaJpZM4W-l6e
.

proddy picture proddy on 29 Sep 2018

I am using also win 10. I will try to switch to English locale and reinstall VSCode and Platformio and buid it again and I will let you know if this helps. Thanks Paul!

blacksocket picture blacksocket on 30 Sep 2018

Hi Paul, I am still having issues. I described below step by step what I did. Maybe you see what I am doing wrong ?

  1. Installing VSCode and Restart the PC (if using Windows) to apply the new PATH settings.
  2. Installing Gitlens
  3. Installing C/C++ InteliSense (Platformio IDE depend on this)
  4. Installing PlatformIO IDE
  5. Create New Project via Wizard and select board: "Wemos D1 R2 & Mini (wemos)" and Framework: "Arduino". I tried also without this step -just git clone the repo.
  6. Clon EMS-ESP-Boiler repo into the Main project folder.
  7. Then I am getting a message that the Arduino extension is recommended but I ignore it.

    8. Configure platformio.ini like this below:

[platformio]
env_default = d1_mini

[common]
platform = espressif8266
build_flags = -DMQTT_MAX_PACKET_SIZE=300
build_flags_custom = '-DWIFI_SSID="myWifi"' '-DWIFI_PASSWORD="password"' '-DMQTT_IP="myIP"' '-DMQTT_USER=""' '-DMQTT_PASS=""'
lib_deps = Time, PubSubClient, ArduinoJson

[env:d1_mini]
board = d1_mini
platform = ${common.platform}
framework = arduino
lib_deps = ${common.lib_deps}
build_flags = ${common.build_flags} ${common.build_flags_custom}
upload_speed = 921600

upload_port = COM4

  1. Then build and getting an error below.
  2. The question - did you install any additional libraries via Platformio libraries or any additional extensions ? Are you using only these libraries that are defined in platformio.ini (They have been automatically installed) ?
    in c:\Users\tomas.WINDOWS-9P5QTO1.platformio\platforms\ i have only espressif8266 folder
    in c:\Users\tomas.WINDOWS-9P5QTO1\Documents\PlatformIO\Projects\EMS-ESP-Boiler.piolibdeps\ automatically have been installed these libs:
    ArduinoJson_ID64
    CRC32_ID1202
    PubSubClient_ID89
    Time_ID44
    in c:\Users\tomas.WINDOWS-9P5QTO1\Documents\PlatformIO\Projects\EMS-ESP-Boiler\lib\ is empty

Can you see any differences or additional packages, compilers or different steps you did ? I tried this installation from scratch on Win 10, Win7 many times and always getting similar errors.

Error message:

Executing task in folder EMS-ESP-Boiler: C:\Users\tomas.WINDOWS-9P5QTO1.platformio\penv\Scripts\platformio.exe run <

Processing d1_mini (platform: espressif8266; board: d1_mini; framework: arduino)

Verbose mode can be enabled via -v, --verbose option
PLATFORM: Espressif 8266 > WeMos D1 R2 & mini
SYSTEM: ESP8266 80MHz 80KB RAM (4MB Flash)
Converting boiler.ino
Library Dependency Finder -> http://bit.ly/configure-pio-ldf
LDF MODES: FINDER(chain) COMPATIBILITY(soft)
Collected 30 compatible libraries
Scanning dependencies...
Dependency Graph
|--

======================================================================================================= [SUMMARY] =======================================================================================================
Environment nodemcuv2 [SKIP]
Environment d1_mini [ERROR]
=============================================================================================== [ERROR] Took 4.44 seconds ===============================================================================================
The terminal process terminated with exit code: 1

Terminal will be reused by tasks, press any key to close it.

blacksocket picture blacksocket on 4 Oct 2018

image

blacksocket picture blacksocket on 4 Oct 2018

image

blacksocket picture blacksocket on 4 Oct 2018

image

blacksocket picture blacksocket on 4 Oct 2018

Tomas, this is very strange indeed. I did a fresh install again on a win10 using my github instructions and compared the output during the build which turned out to be the same as yours, except it compiles correctly with no errors or warnings. The only easy easy to debug this is by trial and error, starting by removing lines to find where in the code its breaking. My recent github changes to the code are not related by the way.

So I suggest renaming the boiler.ino (eg. to boiler.backup) and replacing the code in boiler.ino with this to see if it compiles:

#include "ESPHelper.h"
#include "ems.h"
#include "emsuart.h"
#include <ArduinoJson.h>
#include <CRC32.h>
#include <Ticker.h>

netInfo homeNet = {.mqttHost = MQTT_IP,
                   .mqttUser = MQTT_USER,
                   .mqttPass = MQTT_PASS,
                   .mqttPort = 1883,
                   .ssid     = WIFI_SSID,
                   .pass     = WIFI_PASSWORD};

ESPHelper myESP(&homeNet);
#define myDebug(x, ...) myESP.printf(x, ##__VA_ARGS__);
int connectionStatus;

void WIFIcallback() {
    emsuart_init();
}

void setup() {
    myESP.setWifiCallback(WIFIcallback);
    myESP.begin("boiler");
    ems_init();
}

void loop() {
    connectionStatus = myESP.loop();

    if (connectionStatus < WIFI_ONLY)
        return;

    yield();
}

let me know....

proddy picture proddy on 4 Oct 2018

Hi Paul,

I tested this code on Win 10 and Win7 and it works fine. The code compiled successfully:

Executing task in folder EMS-ESP-Boiler: C:\Users\tomas.WINDOWS-9P5QTO1.platformio\penv\Scripts\platformio.exe run <

Processing d1_mini (platform: espressif8266; board: d1_mini; framework: arduino)

Verbose mode can be enabled via -v, --verbose option
PLATFORM: Espressif 8266 > WeMos D1 R2 & mini
SYSTEM: ESP8266 80MHz 80KB RAM (4MB Flash)
Converting boiler.ino
Library Dependency Finder -> http://bit.ly/configure-pio-ldf
LDF MODES: FINDER(chain) COMPATIBILITY(soft)
Collected 30 compatible libraries
Scanning dependencies...
Dependency Graph
|--

======================================================================================================= [SUMMARY] =======================================================================================================
Environment nodemcuv2 [SKIP]
Environment d1_mini [SUCCESS]
============================================================================================= [SUCCESS] Took 26.50 seconds =============================================================================================

Terminal will be reused by tasks, press any key to close it.

blacksocket picture blacksocket on 4 Oct 2018

next add all the #DEFINE's after the "int connectionStatus;" line and
compile again...

On Thu, Oct 4, 2018 at 1:39 PM blacksocket notifications@github.com wrote:

Hi Paul,

I tested this code on Win 10 and Win7 and it works fine. The code compiled
successfully:

Executing task in folder EMS-ESP-Boiler:
C:\Users\tomas.WINDOWS-9P5QTO1.platformio\penv\Scripts\platformio.exe run <

Processing d1_mini (platform: espressif8266; board: d1_mini; framework:
arduino)

Verbose mode can be enabled via -v, --verbose option
PLATFORM: Espressif 8266 > WeMos D1 R2 & mini
SYSTEM: ESP8266 80MHz 80KB RAM (4MB Flash)
Converting boiler.ino
Library Dependency Finder -> http://bit.ly/configure-pio-ldf
LDF MODES: FINDER(chain) COMPATIBILITY(soft)
Collected 30 compatible libraries
Scanning dependencies...
Dependency Graph
|-- 1.5
|-- 2.6
|-- 5.13.2
|-- 1.0
|-- 1.0
|-- 2.0.0
|-- 1.0
| |--
| | |-- 1.0
| |-- 1.0
|--
| |-- 1.0
Compiling .pioenvs\d1_mini\src\boiler.ino.cpp.o
Compiling .pioenvs\d1_mini\lib13a\Time_ID44\DateStrings.cpp.o
Compiling .pioenvs\d1_mini\lib13a\Time_ID44\Time.cpp.o
Compiling .pioenvs\d1_mini\lib80b\PubSubClient_ID89\PubSubClient.cpp.o
Archiving .pioenvs\d1_mini\libd89\libArduinoJson_ID64.a
Compiling .pioenvs\d1_mini\libef2\ESP8266WiFi\BearSSLHelpers.cpp.o
Archiving .pioenvs\d1_mini\lib13a\libTime_ID44.a
Compiling .pioenvs\d1_mini\libef2\ESP8266WiFi\CertStoreBearSSL.cpp.o
Archiving .pioenvs\d1_mini\lib80b\libPubSubClient_ID89.a
Compiling .pioenvs\d1_mini\libef2\ESP8266WiFi\ESP8266WiFi.cpp.o
Compiling .pioenvs\d1_mini\libef2\ESP8266WiFi\ESP8266WiFiAP.cpp.o
Compiling .pioenvs\d1_mini\libef2\ESP8266WiFi\ESP8266WiFiGeneric.cpp.o
Compiling .pioenvs\d1_mini\libef2\ESP8266WiFi\ESP8266WiFiMulti.cpp.o
Compiling .pioenvs\d1_mini\libef2\ESP8266WiFi\ESP8266WiFiSTA.cpp.o
Compiling .pioenvs\d1_mini\libef2\ESP8266WiFi\ESP8266WiFiScan.cpp.o
Compiling .pioenvs\d1_mini\libef2\ESP8266WiFi\WiFiClient.cpp.o
Compiling .pioenvs\d1_mini\libef2\ESP8266WiFi\WiFiClientSecureAxTLS.cpp.o
Compiling .pioenvs\d1_mini\libef2\ESP8266WiFi\WiFiClientSecureBearSSL.cpp.o
Compiling .pioenvs\d1_mini\libef2\ESP8266WiFi\WiFiServer.cpp.o
Compiling .pioenvs\d1_mini\libef2\ESP8266WiFi\WiFiServerSecureAxTLS.cpp.o
Compiling .pioenvs\d1_mini\libef2\ESP8266WiFi\WiFiServerSecureBearSSL.cpp.o
Compiling .pioenvs\d1_mini\libef2\ESP8266WiFi\WiFiUdp.cpp.o
Compiling .pioenvs\d1_mini\lib0bd\Ticker\Ticker.cpp.o
Compiling .pioenvs\d1_mini\lib9de\CRC32_ID1202\CRC32.cpp.o
Compiling .pioenvs\d1_mini\lib402\ESP8266mDNS\ESP8266mDNS.cpp.o
Archiving .pioenvs\d1_mini\lib0bd\libTicker.a
Archiving .pioenvs\d1_mini\libef2\libESP8266WiFi.a
Compiling .pioenvs\d1_mini\libbe9\ArduinoOTA\ArduinoOTA.cpp.o
Archiving .pioenvs\d1_mini\libFrameworkArduinoVariant.a
Archiving .pioenvs\d1_mini\lib9de\libCRC32_ID1202.a
Compiling .pioenvs\d1_mini\FrameworkArduino\Esp-version.cpp.o
Compiling .pioenvs\d1_mini\FrameworkArduino\Esp.cpp.o
Archiving .pioenvs\d1_mini\lib402\libESP8266mDNS.a
Compiling .pioenvs\d1_mini\FrameworkArduino\FS.cpp.o
Compiling .pioenvs\d1_mini\FrameworkArduino\FunctionalInterrupt.cpp.o
Archiving .pioenvs\d1_mini\libbe9\libArduinoOTA.a
Compiling .pioenvs\d1_mini\FrameworkArduino\HardwareSerial.cpp.o
Compiling .pioenvs\d1_mini\FrameworkArduino\IPAddress.cpp.o
Compiling .pioenvs\d1_mini\FrameworkArduino\MD5Builder.cpp.o
Compiling .pioenvs\d1_mini\FrameworkArduino\Print.cpp.o
Compiling .pioenvs\d1_mini\FrameworkArduino\Schedule.cpp.o
Compiling .pioenvs\d1_mini\FrameworkArduino\ScheduledFunctions.cpp.o
Compiling .pioenvs\d1_mini\FrameworkArduino\Stream.cpp.o
Compiling .pioenvs\d1_mini\FrameworkArduino\StreamString.cpp.o
Compiling .pioenvs\d1_mini\FrameworkArduino\Tone.cpp.o
Compiling .pioenvs\d1_mini\FrameworkArduino\Updater.cpp.o
Compiling .pioenvs\d1_mini\FrameworkArduino\WMath.cpp.o
Compiling .pioenvs\d1_mini\FrameworkArduino\WString.cpp.o
Compiling .pioenvs\d1_mini\FrameworkArduino\abi.cpp.o
Compiling .pioenvs\d1_mini\FrameworkArduino\base64.cpp.o
Compiling .pioenvs\d1_mini\FrameworkArduino\cbuf.cpp.o
Compiling .pioenvs\d1_mini\FrameworkArduino\cont.S.o
Compiling .pioenvs\d1_mini\FrameworkArduino\cont_util.c.o
Compiling .pioenvs\d1_mini\FrameworkArduino\core_esp8266_eboot_command.c.o
Compiling .pioenvs\d1_mini\FrameworkArduino\core_esp8266_flash_utils.c.o
Compiling .pioenvs\d1_mini\FrameworkArduino\core_esp8266_i2s.c.o
Compiling .pioenvs\d1_mini\FrameworkArduino\core_esp8266_main.cpp.o
Compiling .pioenvs\d1_mini\FrameworkArduino\core_esp8266_noniso.c.o
Compiling .pioenvs\d1_mini\FrameworkArduino\core_esp8266_phy.c.o
Compiling .pioenvs\d1_mini\FrameworkArduino\core_esp8266_postmortem.c.o
Compiling .pioenvs\d1_mini\FrameworkArduino\core_esp8266_si2c.c.o
Compiling .pioenvs\d1_mini\FrameworkArduino\core_esp8266_sigma_delta.c.o
Compiling .pioenvs\d1_mini\FrameworkArduino\core_esp8266_timer.c.o
Compiling .pioenvs\d1_mini\FrameworkArduino\core_esp8266_waveform.c.o
Compiling .pioenvs\d1_mini\FrameworkArduino\core_esp8266_wiring.c.o
Compiling .pioenvs\d1_mini\FrameworkArduino\core_esp8266_wiring_analog.c.o
Compiling .pioenvs\d1_mini\FrameworkArduino\core_esp8266_wiring_digital.c.o
Compiling .pioenvs\d1_mini\FrameworkArduino\core_esp8266_wiring_pulse.c.o
Compiling .pioenvs\d1_mini\FrameworkArduino\core_esp8266_wiring_pwm.c.o
Compiling .pioenvs\d1_mini\FrameworkArduino\core_esp8266_wiring_shift.c.o
Compiling .pioenvs\d1_mini\FrameworkArduino\debug.cpp.o
Compiling .pioenvs\d1_mini\FrameworkArduino\gdb_hooks.c.o
Compiling .pioenvs\d1_mini\FrameworkArduino\heap.c.o
Compiling .pioenvs\d1_mini\FrameworkArduino\libb64\cdecode.c.o
Compiling .pioenvs\d1_mini\FrameworkArduino\libb64\cencode.c.o
Compiling .pioenvs\d1_mini\FrameworkArduino\libc_replacements.c.o
Compiling .pioenvs\d1_mini\FrameworkArduino\pgmspace.cpp.o
Compiling .pioenvs\d1_mini\FrameworkArduino\sntp-lwip2.c.o
Compiling .pioenvs\d1_mini\FrameworkArduino\spiffs\spiffs_cache.c.o
Compiling .pioenvs\d1_mini\FrameworkArduino\spiffs\spiffs_check.c.o
Compiling .pioenvs\d1_mini\FrameworkArduino\spiffs\spiffs_gc.c.o
Compiling .pioenvs\d1_mini\FrameworkArduino\spiffs\spiffs_hydrogen.c.o
Compiling .pioenvs\d1_mini\FrameworkArduino\spiffs\spiffs_nucleus.c.o
Compiling .pioenvs\d1_mini\FrameworkArduino\spiffs_api.cpp.o
Compiling .pioenvs\d1_mini\FrameworkArduino\spiffs_hal.cpp.o
Compiling .pioenvs\d1_mini\FrameworkArduino\time.c.o
Compiling .pioenvs\d1_mini\FrameworkArduino\uart.c.o
Compiling .pioenvs\d1_mini\FrameworkArduino\umm_malloc\umm_malloc.c.o
Archiving .pioenvs\d1_mini\libFrameworkArduino.a
Linking .pioenvs\d1_mini\firmware.elf
Building .pioenvs\d1_mini\firmware.bin
Retrieving maximum program size .pioenvs\d1_mini\firmware.elf
Checking size .pioenvs\d1_mini\firmware.elf
Memory Usage -> http://bit.ly/pio-memory-usage
DATA: [===== ] 45.4% (used 37224 bytes from 81920 bytes)

PROGRAM: [=== ] 34.4% (used 359496 bytes from 1044464 bytes)

[SUCCESS] Took 26.49 seconds

=======================================================================================================

[SUMMARY]

Environment nodemcuv2 [SKIP]

Environment d1_mini [SUCCESS]

[SUCCESS] Took 26.50 seconds

Terminal will be reused by tasks, press any key to close it.

—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub
https://github.com/proddy/EMS-ESP-Boiler/issues/4#issuecomment-426986773,
or mute the thread
https://github.com/notifications/unsubscribe-auth/ABLHeGNFYBarot1kGWAMKRBGWaf1isSVks5uhfNrgaJpZM4W-l6e
.

proddy picture proddy on 4 Oct 2018

I added all #define after the "int connectionStatus;" line from the previous boiler.ino code below and now getting this error (see screenshot):

// timers, all values are in seconds

define PUBLISHVALUES_TIME 300 // every 5 mins post HA values

define SYSTEMCHECK_TIME 10 // every 10 seconds check if Boiler is online and execute other requests

define REGULARUPDATES_TIME 60 // every minute a call is made

define HEARTBEAT_TIME 1 // every second blink heartbeat LED

define MAX_MANUAL_CALLS 2 // number of ems reads we do during the fetch cycle (in regularUpdates)

#define PROJECT_CMDS \
"* s show statistics\n\r" \
"* P publish stats to MQTT\n\r" \
"* v [n] set logging (0=none, 1=basic, 2=verbose)\n\r" \
"* p poll response on/off\n\r" \
"* T thermostat Support on/off\n\r" \
"* S shower timer on/off\n\r" \
"* A shower alert on/off\n\r" \
"* r [n] request for data from EMS. Examples:\n\r" \
"* from Boiler: 33=UBAParameterWW, 18=UBAMonitorFast, 19=UBAMonitorSlow, 34=UBAMonitorWWMessage\n\r" \
"* from Thermostat: 91=RC20StatusMessage, A8=RC20Temperature, 6=RC20Time, 2=Version\n\r" \
"* t [n] set thermostat temperature to n\n\r" \
"* m [n] set thermostat mode (0=low, 1=manual, 2=clock)\n\r" \
"* w [n] set boiler warm water temperature to n (min 30)\n\r" \
"* a [n] boiler warm water on (n=1) or off (n=0)\n\r" \
"* x [n] experimental (warning: for debugging only!)"

// GPIOs

define LED_RX D1 // (GPIO5 on nodemcu)

define LED_TX D2 // (GPIO4 on nodemcu)

define LED_ERR D3 // (GPIO0 on nodemcu)

define LED_HEARTBEAT LED_BUILTIN // onboard LED

// hostname is also used as the MQTT topic identifier (home/)

define HOSTNAME "wemos"

// app specific - do not change

define MQTT_BOILER MQTT_BASE HOSTNAME "/"

#define TOPIC_START MQTT_BOILER MQTT_TOPIC_START

define TOPIC_THERMOSTAT_TEMP MQTT_BOILER "thermostat_temp" // for received thermostat temp changes

define TOPIC_THERMOSTAT_CURRTEMP MQTT_BOILER "thermostat_currtemp" // current temperature

define TOPIC_THERMOSTAT_SELTEMP MQTT_BOILER "thermostat_seltemp" // selected temperature

define TOPIC_THERMOSTAT_MODE MQTT_BOILER "thermostat_mode" // selected temperature

define TOPIC_BOILER_WARM_WATER_SELECTED_TEMPERATURE MQTT_BOILER "boiler_wwtemp" // warm water selected temp

define TOPIC_BOILER_DATA MQTT_BOILER "boiler_data" // for sending boiler values

define TOPIC_SHOWERTIME MQTT_BOILER "showertime" // for sending shower time results

define TOPIC_SHOWER_ALARM "shower_alarm" // for notifying HA that shower time has reached its limit

define TOPIC_SHOWER_TIMER MQTT_BOILER "shower_timer" // toggle switch for enabling the shower logic

define TOPIC_SHOWER_ALERT MQTT_BOILER "shower_alert" // toggle switch for enabling the shower alarm logic

define TOPIC_SHOWER_COLDSHOT MQTT_BOILER "shower_coldshot" // used to trigger a coldshot from HA publish

// default values
// thermostat support, shower timing and shower alert all enabled (1) (disabled = 0)

define BOILER_THERMOSTAT_ENABLED 1

define BOILER_SHOWER_TIMER 1

define BOILER_SHOWER_ALERT 0

// logging - EMS_SYS_LOGGING_VERBOSE, EMS_SYS_LOGGING_NONE, EMS_SYS_LOGGING_BASIC (see ems.h)

define BOILER_DEFAULT_LOGGING EMS_SYS_LOGGING_NONE

image

blacksocket picture blacksocket on 4 Oct 2018

Start deleting the #define lines block by block until it compiles. Starting
with project_cmds

On Thu, 4 Oct 2018 at 17:05, blacksocket notifications@github.com wrote:

I added all #define from the previous boiler.ino code and now getting this:
[image: image]
https://user-images.githubusercontent.com/13651344/46483361-bdcd5480-c7f7-11e8-8a47-772f3a5a697d.png

—
You are receiving this because you commented.

Reply to this email directly, view it on GitHub
https://github.com/proddy/EMS-ESP-Boiler/issues/4#issuecomment-427054513,
or mute the thread
https://github.com/notifications/unsubscribe-auth/ABLHeKvZxgAvKwYq4dmdPkNJGoqSIpG3ks5uhiPUgaJpZM4W-l6e
.

proddy picture proddy on 4 Oct 2018

After deleting PROJECT_CMDS code built successfully:

#define PROJECT_CMDS \
"* s show statistics\n\r" \
"* P publish stats to MQTT\n\r" \
"* v [n] set logging (0=none, 1=basic, 2=verbose)\n\r" \
"* p poll response on/off\n\r" \
"* T thermostat Support on/off\n\r" \
"* S shower timer on/off\n\r" \
"* A shower alert on/off\n\r" \
"* r [n] request for data from EMS. Examples:\n\r" \
"* from Boiler: 33=UBAParameterWW, 18=UBAMonitorFast, 19=UBAMonitorSlow, 34=UBAMonitorWWMessage\n\r" \
"* from Thermostat: 91=RC20StatusMessage, A8=RC20Temperature, 6=RC20Time, 2=Version\n\r" \
"* t [n] set thermostat temperature to n\n\r" \
"* m [n] set thermostat mode (0=low, 1=manual, 2=clock)\n\r" \
"* w [n] set boiler warm water temperature to n (min 30)\n\r" \
"* a [n] boiler warm water on (n=1) or off (n=0)\n\r" \
"* x [n] experimental (warning: for debugging only!)"

image

blacksocket picture blacksocket on 4 Oct 2018

err - didn't I warn you about that a week ago?

proddy picture proddy on 4 Oct 2018

Yes, I was trying to delete backslashes "\n\r" etc. from the PROJECT_CMDS and build without success. Also I tried to build it on the Windows with English locale because you told me that you installed Platformio from scratch, downloaded the code and it works. That is why I thought that there is something wrong with my PIO environment. Now I am trying compile it again:

image

image

blacksocket picture blacksocket on 4 Oct 2018

blacksocket: try removing the \ backslash continuation characters at the end of lines 45 - 58 and concatenating the commands on one long line. This worked for me. Keep the backslashes (\n\r) in each of the individual command strings.

mrfixit1 picture mrfixit1 on 5 Oct 2018

thanks @mrfixit1 I think I'll re-write that piece since this is causing problems on some environments

proddy picture proddy on 5 Oct 2018
👍1

Hi mrfixit1, thanks for your help! Do you mean concatenate them including all of the quotation marks like this ?

define PROJECT_CMDS

"* s show statistics\n\r""* P publish stats to MQTT\n\r""* v [n] set logging (0=none, 1=basic, 2=verbose)\n\r""* p poll response on/off\n\r""* T thermostat Support on/off\n\r""* S shower timer on/off\n\r""* A shower alert on/off\n\r""* r [n] request for data from EMS. Examples:\n\r""* from Boiler: 33=UBAParameterWW, 18=UBAMonitorFast, 19=UBAMonitorSlow, 34=UBAMonitorWWMessage\n\r""* from Thermostat: 91=RC20StatusMessage, A8=RC20Temperature, 6=RC20Time, 2=Version\n\r""* t [n] set thermostat temperature to n\n\r""* m [n] set thermostat mode (0=low, 1=manual, 2=clock)\n\r""* w [n] set boiler warm water temperature to n (min 30)\n\r""* a [n] boiler warm water on (n=1) or off (n=0)\n\r""* x [n] experimental (warning: for debugging only!)"

blacksocket picture blacksocket on 5 Oct 2018

Yes

mrfixit1 picture mrfixit1 on 5 Oct 2018

For me this is also not working:
image
image

blacksocket picture blacksocket on 5 Oct 2018

Looks like you deleted the #define PROJECT_CMDS at the start of line 45, try putting it back

mrfixit1 picture mrfixit1 on 5 Oct 2018

define PROJECT_CMDS is still there i just show the message that covers the define in line 44. Ach ok, so you mean all of them in one line including define..

blacksocket picture blacksocket on 5 Oct 2018

Indeed it works for me too!!! ;-)) Thanks mrfixit1! Thank you ALL for your help!

blacksocket picture blacksocket on 5 Oct 2018

New line = new statement, unless there is a continuation \ to join them, which in our cases does not work....

mrfixit1 picture mrfixit1 on 5 Oct 2018
👍1

@mrfixit1 @blacksocket I improved the code to make the command list dynamic and avoid the compile errors. I also added a new function 'h' to list which commands are available.

proddy picture proddy on 6 Oct 2018
👍1

Hi Paul, I have just one question. What kind of EMS address (Transmitter ID ) are you using to simulate Buderus Controler in this program ? Is this Buderus Service Key with the Address 0x0B ? I am asking because when I connected Wemos to the EMS circuit I am getting a message "(00:02:08) Didn't receive acknowledgement from the 0xa8, so resending (attempt #1/4)...". I am not sure if this is caused by the electronic circuit itself or by the software. By the way I have Buderus Logamax Plus GB072-20 heating system and I am using RC 300 controler in my house, so I am not sure if the Destination ID is also the same as yours.

blacksocket picture blacksocket on 8 Oct 2018

Yes x0B for our device. I explain this in detail in my readme. When you
have everything connected turn on verbose messaging with ‘v 2’ to see the
incoming telegrams. It’ll tell you what is broadcasting on the ems bus. A8
is probably not compatible with your thermostat (not boiler). Just comment
out that call.

On Mon, 8 Oct 2018 at 00:56, Tomas notifications@github.com wrote:

Hi Paul, I have just one question. What kind of address are you using to
simulate Buderus Controler in this program ? Is this Buderus Service Key
with the Address 0x0B ? I am asking because when I connected Wemos to the
EMS circuit I am getting a message "(00:02:08) Didn't receive
acknowledgement from the 0xa8, so resending (attempt #1
https://github.com/proddy/EMS-ESP-Boiler/pull/1/4)...". I am not sure
if this is caused by the electronic circuit itself or by the software. I am
using RC 300 in my house.

—
You are receiving this because you modified the open/close state.

Reply to this email directly, view it on GitHub
https://github.com/proddy/EMS-ESP-Boiler/issues/4#issuecomment-427694340,
or mute the thread
https://github.com/notifications/unsubscribe-auth/ABLHeKok7GI8W2ubaIQO9y-tmQ2G_hV2ks5uioaygaJpZM4W-l6e
.

proddy picture proddy on 8 Oct 2018

Paul, "v 2" works for me. A8 is the ID of your Boiler? If I will change it with my heating device id and my thermostat ID RC-300 maybe it will be also working. What do you think ?
image

blacksocket picture blacksocket on 9 Oct 2018

great, looks like its working. Did you get messages from your thermostat
too?

On Tue, Oct 9, 2018 at 3:20 PM Tomas notifications@github.com wrote:

Paul, "v 2" works for me:
[image: image]
https://user-images.githubusercontent.com/13651344/46672090-d7471580-cbd6-11e8-838b-813979ec1b93.png

—
You are receiving this because you modified the open/close state.
Reply to this email directly, view it on GitHub
https://github.com/proddy/EMS-ESP-Boiler/issues/4#issuecomment-428188781,
or mute the thread
https://github.com/notifications/unsubscribe-auth/ABLHeIA4lOKeCSvsimXndkJyJTNOH1PUks5ujKKagaJpZM4W-l6e
.

proddy picture proddy on 12 Oct 2018

yes it is working, however I did not get messages from my thermostat..

blacksocket picture blacksocket on 14 Oct 2018

That's strange, I double checked the code it should print out anything that lands on the bus. Your thermostat should be sending out signals all the time. Check how your connecting to the bus and that your thermostat is still working correctly. It could also be the circuit (not sure which one you're using)

proddy picture proddy on 14 Oct 2018

Hi proddy,
first of all, thank you for a lot of work which you did with this project.
Secondly, sorry that I didn’t open new tread, but this one is related to my problem - receiving response messages.
Reading boilers broadcast messages is working without problem.
After week of trying, I have no idea where the problem is.
After every poll message I receive last 2 bytes of it (like echo), but without answer from boiler.
Something what you describe here:
https://github.com/susisstrolch/EMS-ESP12/issues/2

I use susisstrolch board, without powering circuit (I use stand-alone 5V power supply, tried 3.3V too).
On EMS bus I have boiler only, without thermostat (I want to control boiler power with UBASollwerte/UBASetpoints -1a message).
Do you have any idea what could be a problem? I check few times my hardware connection.
image

mareksugar picture mareksugar on 28 Oct 2018

It looks like sending is not working. I remember Jeurgen's boards wern't
designed to also transmit. How are you powering the ESP? The ESP8266 takes
a lot of current when doing a Tx (>300mA).

On Sun, Oct 28, 2018 at 5:18 PM mareksugar notifications@github.com wrote:

Hi proddy,
first of all, thank you for a lot of work which you did with this project.
Secondly, sorry that I didn’t open new tread, but this one is related to
my problem - receiving response messages.
Reading boilers broadcast messages is working without problem.
After week of trying, I have no idea where the problem is.
After every poll message I receive last 2 bytes of it (like echo), but
without answer from boiler.
Something what you describe here:
susisstrolch/EMS-ESP12#2
https://github.com/susisstrolch/EMS-ESP12/issues/2

I use susisstrolch board, without powering circuit (I use stand-alone 5V
power supply, tried 3.3V too).
On EMS bus I have boiler only, without thermostat (I want to control
boiler power with UBASollwerte/UBASetpoints -1a message).
Do you have any idea what could be a problem? I check few times my
hardware connection.
[image: image]
https://user-images.githubusercontent.com/33668626/47618604-6314d900-dad5-11e8-9831-ec257b239d4d.png

—
You are receiving this because you modified the open/close state.
Reply to this email directly, view it on GitHub
https://github.com/proddy/EMS-ESP-Boiler/issues/4#issuecomment-433719463,
or mute the thread
https://github.com/notifications/unsubscribe-auth/ABLHeOrX3u5OETrOHvDUtLkFN21EX5ZVks5updjOgaJpZM4W-l6e
.

proddy picture proddy on 28 Oct 2018

His schematic is same as your , only LM393 has compactator.
For power supply I use this 3W module, but I dont see any voltage drops with oscloscope
https://www.aliexpress.com/item/5PCS-TSP-05-replace-HLK-PM01-AC-DC-220V-to-5V-mini-power-supply-module-intelligent/32705954189.html?spm=a2g0s.9042311.0.0.27424c4datbokx

mareksugar picture mareksugar on 28 Oct 2018

I really don't know what the problem is then if you say you're not using the buck converter to drive the ESP8266 like in Juergen's board. There are others that have used my library with this board so I'm assuming it works. I can only state it works fine with esp8266 dev boards as mentioned in my doc.

As this issue is related to platformio compile errors, please open a new issue where we can track status.

proddy picture proddy on 28 Oct 2018

Had the same problem and it occured when I put into platformio.ini "ticker" with a version
=> then it gets (as described by proddy) another version.

For me it solved to delete the complete folder .piolibdeps

lobocobra picture lobocobra on 27 May 2019
❤1

I had the same problem. Did 2 things:

  • deleted the folder .piolibdeps
  • deleted the "ticker" line in the platformio.ini
; PlatformIO Project Configuration File
;
;   Build options: build flags, source filter
;   Upload options: custom upload port, speed and extra flags
;   Library options: dependencies, extra library storages
;   Advanced options: extra scripting
;
; Please visit documentation for the other options and examples
; https://docs.platformio.org/page/projectconf.html

[env:d1_mini]
platform = espressif8266
board = d1_mini
framework = arduino
lib_deps = 
    adafruit/Adafruit FXAS21002C@^1.3.0
        [ticker line deleted here] <----------------------
Saultes45 picture Saultes45 on 2 Dec 2020
Was this page helpful?
0 / 5 - 0 ratings

Related issues

stevedcc picture stevedcc  Â·  12Comments
TimoFriedri picture TimoFriedri  Â·  6Comments
jorritsmit picture jorritsmit  Â·  12Comments
MichaelDvP picture MichaelDvP  Â·  23Comments
mglatz picture mglatz  Â·  20Comments