Cura: Custom support cause line on the model
Application version 4.5.0
(The version of the application this issue occurs with.)
Platform
Windows 10, GPU= RX570 Ram= 16GB Processor= AMD FX-8350
Printer
My own build CoreXY Printer
Reproduction steps
- I tried to make custom support with support blocker.
- After i did this. I used "Per Model Settings" > "Modify settings for overlaps" section and check Generate support.
Screenshot(s)
1) https://yadi.sk/i/QGDbWXHTQY1E-Q
2) https://yadi.sk/i/OJjI9DyfDhM7hw
Actual results
Supports are generated but all the intersection has structure lines.
Expected results
It must just generate supports and there shouldn't be any line
Project file
Gcode
keremdikmen
All 2 comments
Instead of "Modify settings for overlaps" try using "Print as support".
"Modify settings for overlaps" internally creates a new mesh out of the union of the modifier and the mesh that it overlaps. This new mesh has its own walls, so you get a seam between the walls of the original mesh and the walls of the new mesh. You can see whats happening in the layer view.
fieldOfView
on 26 Apr 2020
Correct. Working as intended there.
Ghostkeeper
on 28 Apr 2020
Related issues
Nemernemer
路
3Comments
probonopd
路
3Comments
timherrm
路
3Comments
ferociousdiablo
路
3Comments
StanislavJochman
路
3Comments
Most helpful comment
Instead of "Modify settings for overlaps" try using "Print as support".
"Modify settings for overlaps" internally creates a new mesh out of the union of the modifier and the mesh that it overlaps. This new mesh has its own walls, so you get a seam between the walls of the original mesh and the walls of the new mesh. You can see whats happening in the layer view.