Cura: Ender3 Pro Profile Nozzle missing

[Strahler85]

Application version
4.6

Platform
Windows 10 64Bit

Printer
Ender3 Pro

Reproduction steps
Create new printer Ender3 Pro

Screenshot(s)

Actual results
No Nozzle Size

Expected results
Nozzle Size selectable

[jerryfudd]

+watching

[spacecraft1013]

I have the same issue, same printer

[andyscriv]

Same issue as well, no nozzle size selection :(

[jerryfudd]

I don't believe the Pro profile is going to be any different to that of the Ender 3

[benjareuland200]

Same issue too

[Strahler85]

Found the issue, in \resources\variants there are no ender3pro files

If you copy these files in this folder than it should work
ender3pro_variants.zip

[andyscriv]

Found the issue, in \resources\variants there are no ender3pro files

If you copy these files in this folder than it should work
ender3pro_variants.zip

Awsome sauce!
Thanks for that :)

[Ghostkeeper]

Thanks for the solution. That was indeed wrong. Normally we check that sort of thing before merging. It must have been an oversight (I think I was the one that merged it in this case actually, iirc...)

I've tested and added your profiles for the next release. They contain no setting overrides, but it's better than nothing I guess and the quality profiles for the Ender printers are sufficiently well designed to give decent defaults nonetheless.

See https://github.com/Ultimaker/Cura/commit/83adb98a5f3c9a51ec71bf3a8bdd41c27273fbc5.

[uyesercan]

Found the issue, in \resources\variants there are no ender3pro files

If you copy these files in this folder than it should work
ender3pro_variants.zip

Working very well. Thanks for solution. Default exact Windows 10 folder location. "C:\Program Files\Ultimaker Cura 4.6\resources\variants"

[Ghostkeeper]

We're probably creating a 4.6.1 release to fix a bug with the Z seam placement. We've decided to merge this fix into that as well, since it's relatively low-risk and seems to be high value based on issue reports.

[hpandelo]

I can't see this menu for Anet A8 Plus.. Expected??

[Ghostkeeper]

Yes, the Anet A8 Plus doesn't have any nozzle profiles to choose from. You need to adjust the settings yourself if you have a different nozzle than the standard one.

[maludwig]

To those who are on a version later than 4.6 and are still experiencing this issue, I bet you're expecting that under:
Settings -> Manage Printers -> Machine Settings -> Extruder, you'll have a nozzle size.

This is not where it is. You're in the wrong spot. I feel stupid cuz this whole time I've been looking there, meanwhile, dead center of the screen it's been clearly displaying "Generic PLA - 0.4mm Nozzle", not under any setting or anything. It's just right there, just to the left of all your other print settings.

I feel dumb.