Cura: Bug slice hole

[userosos]

Cura 4.5 (Cura 4.6) Windows 10 x64 has the error also. Not correct slice some hole in the model.

CFFFP_mainsail_entry_NEW_long_PRINT_1(3).zip

[smartavionics]

Please provide the project file (File -> Save, rename or zip .3mf) or at lease the STL so we can check the model(s). Thanks.

[userosos]

Please provide the project file (File -> Save, rename or zip .3mf) or at lease the STL so we can check the model(s). Thanks.

I checked the models it not work. I attached 3mf file.

[smartavionics]

I checked the models it not work.

OK, if you don't want to supply any more info, I am not bothering to respond to this issue any more, goodbye.

[userosos]

OK, if you don't want to supply any more info, I am not bothering to respond to this issue any more, goodbye.

I think that i not understend you. I mean that i add 3mf file in the first message. I repeat now again.
CFFFP_mainsail_entry_NEW_long_PRINT_1(3).zip

[Ghostkeeper]

That's a .gcode file, not the project file (.3mf). To save a project file, you need to load the model again, make sure the bug reproduces, and press File -> Save...
Using the project file we should be able to reproduce the slice completely, as it contains the models in your scene as well as the settings and profiles you were using. That way we can re-run the algorithms to see where it's going wrong or why it's making this hole.

[userosos]

@Ghostkeeper I apologize for my stupidity
CFFFP_EPSILON_113_ins_end_simple_part2 GREG PETg lw 0.4mm lh 0.2mm if 30% ext1 210C bed 60C.gcode.zip

[eskeyaar]

@Ghostkeeper I apologize for my stupidity
CFFFP_EPSILON_113_ins_end_simple_part2 GREG PETg lw 0.4mm lh 0.2mm if 30% ext1 210C bed 60C.gcode.zip

still its a gcode, not a 3mf project file.

[userosos]

@Ghostkeeper I apologize for my stupidity
CFFFP_EPSILON_113_ins_end_simple_part2 GREG PETg lw 0.4mm lh 0.2mm if 30% ext1 210C bed 60C.gcode.zip

still its a gcode, not a 3mf project file.

Oh sorry. I think that i zipped 3mf file.
CFFFP_EPSILON_113_ins_end_simple_part2.zip

[eskeyaar]

@Ghostkeeper I apologize for my stupidity
CFFFP_EPSILON_113_ins_end_simple_part2 GREG PETg lw 0.4mm lh 0.2mm if 30% ext1 210C bed 60C.gcode.zip

still its a gcode, not a 3mf project file.

Oh sorry. I think that i zipped 3mf file.
CFFFP_EPSILON_113_ins_end_simple_part2.zip

The model looks good only. what issue are you facing? Do you mean the hole is small? if so then change in design. Everything looks ok in the preview.

[userosos]

@Ghostkeeper I apologize for my stupidity
CFFFP_EPSILON_113_ins_end_simple_part2 GREG PETg lw 0.4mm lh 0.2mm if 30% ext1 210C bed 60C.gcode.zip

still its a gcode, not a 3mf project file.

Oh sorry. I think that i zipped 3mf file.
CFFFP_EPSILON_113_ins_end_simple_part2.zip

The model looks good only. what issue are you facing? Do you mean the hole is small? if so then change in design. Everything looks ok in the preview.

May be. Prusaslicer work is Ok. The model not from me. I checked the mode

[Ghostkeeper]

The model does have a hole there.

What's wrong with the hole, exactly? Could you fill in the issue template? What is the expected behaviour and what is the behaviour that you're seeing?

[no-response[bot]]

This issue has been automatically closed because there has been no response to our request for more information from the original author. With only the information that is currently in the issue, we don't have enough information to take action. Please reach out if you have or find the answers we need so that we can investigate further.