Cura: [4.4.1] Initial layer temperatures not working

[Firedrops]

Application version
4.4.1

Platform
Windows 10

Printer
Ender 3 Pro

Reproduction steps

1. Set different Initial Layer temperatures

Screenshot(s)

Actual results
Prints start with both hotend and bed temperature at "bulk" values.

Expected results
Prints should start with hotend and bed temperature at initial layer temperatures

Project file
V slotr.zip

Log file
(See https://github.com/Ultimaker/Cura#logging-issues to find the log file to upload, or copy a relevant snippet from it.)

Additional information
(Extra information relevant to the issue.)

[fieldOfView]

What is your start gcode script? It looks like something that does not come shipped with Cura. The project file you attached is not a project file but a gcode file, so I can't see how you have configured your printer.

[Firedrops]

; Ender 3 Custom Start G-code
M104 S{material_print_temperature_layer_0} ; Set Extruder temperature
M140 S{material_bed_temperature_layer_0} ; Set Heat Bed temperature
M190 S{material_bed_temperature_layer_0} ; Wait for Heat Bed temperature
M109 S{material_print_temperature_layer_0} ; Wait for Extruder temperature
G28 ; Home all axes
M117 Purge extruder
G92 E0 ; Reset Extruder
G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed
G1 X0.1 Y20 Z0.3 F5000.0 ; Move to start position
G1 X0.1 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line
G1 X0.4 Y200.0 Z0.3 F5000.0 ; Move to side a little
G1 X0.4 Y20 Z0.3 F1500.0 E30 ; Draw the second line
G92 E0 ; Reset Extruder
G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed
M117 By your command!
; End of custom start GCode

from here. Is it causing this issue?

[fieldOfView]

No offense, but no that isn't what you use. For one thing there are comments in the gcode that are missing in what you posted above, and some T0 arguments. The one above looks correct, but it is different from what you use. Please doublecheck what you have in Cura.

[fieldOfView]

For reference, this is what is in your gcode:

; Ender 3 Custom Start G-code
; start preheat 1
M140 S40; start preheating the bed
M104 S220 T0; start preheating hotend
M190 S40; heat to bed setting in Cura and WAIT
M109 S220 T0; heat hotend to setting in Cura and WAIT
; end preheating

As you can see, the comments don't match, and there are extra T0 arguments. The comments don't matter and neither does the T0, but it makes me think that the actual snippet you use is different than what you posted, and lacks the _layer_0 parts in the replacement pattern.

[Firedrops]

Thanks, I re-pasted the code and now it's working fine. I probably made a mistake while looking at a few different start G-codes.