Betaflight: 4.0.2 RSSI Channel wont Save

[sethroth]

On my reciever RSSI is set up to be channel 16 and I am seeing activity on my AUX12 which is fine. when I select AUX12 and save it does not save the RSSI . where it did and worked on the previous version 3.2.1. is constantly defaults back to disabled. I have tried to set
" Set rssi_channel = 16 " and then save through the CLI too this also did not work.

Try set the Rssi Channel then save and disconnect and reconnect and it will be back to disabled even if you do this through the CLI

In the Previous version I simply selected AUX12 =channel 16 for Rssi and saved and reconnected and it would be working fine.

version

Betaflight / OMNIBUSF4SD (OBSD) 4.0.2 May 5 2019 / 12:08:37 (56bdc8d26) MSP API: 1.41

board_name OMNIBUSF4SD
manufacturer_id

name

name Dusty75X

resources

timer

dma

mixer

servo

servo mix

feature

feature -RX_PARALLEL_PWM
feature RX_SERIAL
feature TELEMETRY
feature RSSI_ADC
feature LED_STRIP

beeper

beacon

beacon RX_SET

map

serial

led

led 0 0,0::L:0
led 1 1,0::L:0
led 2 2,0::A:0
led 3 3,0::A:0

color

mode_color

aux

adjrange

rxrange

vtx

rxfail

display_name

master

set min_check = 1010
set max_check = 2000
set fpv_mix_degrees = 35
set serialrx_provider = SBUS
set dshot_idle_value = 650
set motor_pwm_protocol = DSHOT600
set yaw_motors_reversed = ON
set pid_process_denom = 1

profile

profile 0

rateprofile

rateprofile 0

Im using a FrSky XM+ reciever with RSSI set up on Channel 16

[etracer65]

Disable RSSI_ADC on the configuration tab.