Zigbee2mqtt: Cannot get the Node Descriptor of the Device: 0x00158d00028b6b2f

[sander816]

Bug report
when adding a MCCGQ01LM mijia door sensor i get
Cannot get the Node Descriptor of the Device: 0x00158d00028b6b2f

I have succesfully connected 2 MCCGQ01LM aqara sensors though

https://www.gearbest.com/smart-light-bulb/pp_257677.html?wid=1433363&currency=EUR&vip=2275151&gclid=Cj0KCQiAmuHhBRD0ARIsAFWyPwiJkmS8xakfysG3pIX6zJjxIPlvwuuvxFGACLu2s41geaEm3cmNnGwaAvB_EALw_wcB

[sander816]

same goes for the aqara cub:
Cannot get the Node Descriptor of the Device: 0x00158d000278e797 (Error: Timed out after 10000 ms)

[subzero79]

Get closer to the coordinator when pairing. Also if you have a muti meter check the device battery voltage it might be low.

[Koenkk]

Also see: https://koenkk.github.io/zigbee2mqtt/getting_started/pairing_devices.html#xiaomi

[sander816]

i tried at 1 meter, no difference,
battery voltage is 2.88v

when pairing and pressing the button every second:

 zigbee2mqtt:warn 1/11/2019, 11:17:21 PM Please see: https://koenkk.github.io/zigbee2mqtt/how_tos/how_to_support_new_devices.html
  zigbee2mqtt:warn 1/11/2019, 11:17:26 PM Device with modelID 'undefined' is not supported.
  zigbee2mqtt:warn 1/11/2019, 11:17:26 PM Please see: https://koenkk.github.io/zigbee2mqtt/how_tos/how_to_support_new_devices.html
  zigbee2mqtt:warn 1/11/2019, 11:17:31 PM Device with modelID 'undefined' is not supported.
  zigbee2mqtt:warn 1/11/2019, 11:17:31 PM Please see: https://koenkk.github.io/zigbee2mqtt/how_tos/how_to_support_new_devices.html
  zigbee2mqtt:warn 1/11/2019, 11:17:36 PM Device with modelID 'undefined' is not supported.
  zigbee2mqtt:warn 1/11/2019, 11:17:36 PM Please see: https://koenkk.github.io/zigbee2mqtt/how_tos/how_to_support_new_devices.html
 PM Cannot get the Node Descriptor of the Device: 0x00158d00028b6b2f (Error: Timed out after 10000 ms)
  zigbee2mqtt:warn 1/11/2019, 11:17:43 PM Device with modelID 'undefined' is not supported.
  zigbee2mqtt:warn 1/11/2019, 11:17:43 PM Please see: https://koenkk.github.io/zigbee2mqtt/how_tos/how_to_support_new_devices.html
  zigbee2mqtt:warn 1/11/2019, 11:17:47 PM Device with modelID 'undefined' is not supported.
  zigbee2mqtt:warn 1/11/2019, 11:17:47 PM Please see: https://koenkk.github.io/zigbee2mqtt/how_tos/how_to_support_new_devices.html
  zigbee2mqtt:warn 1/11/2019, 11:17:53 PM Device with modelID 'undefined' is not supported.
  zigbee2mqtt:warn 1/11/2019, 11:17:53 PM Please see: https://koenkk.github.io/zigbee2mqtt/how_tos/how_to_support_new_devices.html

[Koenkk]

• Stop zigbee2mqtt
• Remove all entries of 0x00158d00028b6b2f from database.db
• Start zigbee2mqtt
• Follow https://koenkk.github.io/zigbee2mqtt/getting_started/pairing_devices.html#xiaomi carefully

[sander816]

did that, but still:
zigbee2mqtt:error 1/11/2019, 11:32:32 PM Cannot get the Node Descriptor
of the Device: 0x00158d00028b6b2f (Error: Timed out after 10000 ms)

Op vr 11 jan. 2019 om 23:28 schreef Koen Kanters [e-mail]:

>

• Stop zigbee2mqtt
• Remove all entries of 0x00158d00028b6b2f from database.db
• Start zigbee2mqtt
• Follow
  https://koenkk.github.io/zigbee2mqtt/getting_started/pairing_devices.html#xiaomi
  carefully

—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub
https://github.com/Koenkk/zigbee2mqtt/issues/837#issuecomment-453677260,
or mute the thread
https://github.com/notifications/unsubscribe-auth/Ahw1pbhX5KmOAoQ6myVwwQmGvk_QdLjeks5vCQ_5gaJpZM4Z7Ycd
.

[sander816]

same error when pressin the button:
zigbee2mqtt:warn 1/11/2019, 11:35:29 PM Device with modelID 'undefined' is not supported.
zigbee2mqtt:warn 1/11/2019, 11:35:29 PM Please see: https://koenkk.github.io/zigbee2mqtt/how_tos/how_to_support_new_devices.html
zigbee2mqtt:warn 1/11/2019, 11:35:35 PM Device with modelID 'undefined' is not supported.
zigbee2mqtt:warn 1/11/2019, 11:35:35 PM Please see: https://koenkk.github.io/zigbee2mqtt/how_tos/how_to_support_new_devices.html
zigbee2mqtt:warn 1/11/2019, 11:35:36 PM Message without device!

sensor works fine in mihome

[sander816]

hmm, after some time it recognized the sensor:

{"id":5,"type":"EndDevice","ieeeAddr":"0x00158d00028b6b2f","nwkAddr":14432,"manufId":4151,"modelId":"lumi.sensor_magnet","epList":[1],"status":"online","joinTime":15472461$
{"id":5,"type":"EndDevice","ieeeAddr":"0x00158d00028b6b2f","nwkAddr":14432,"manufId":4151,"modelId":"lumi.sensor_magnet","epList":[1],"status":"online","joinTime":15472461$

 zigbee2mqtt:info 1/11/2019, 11:40:52 PM MQTT publish: topic 'zigbee2mqtt/0x00158d00028b6b2f', payload '{"contact":true,"linkquality":70}'
  zigbee2mqtt:info 1/11/2019, 11:40:52 PM MQTT publish: topic 'zigbee2mqtt/0x00158d00028b6b2f', payload '{"contact":false,"linkquality":73}'
  zigbee2mqtt:info 1/11/2019, 11:40:53 PM MQTT publish: topic 'zigbee2mqtt/0x00158d00028b6b2f', payload '{"contact":true,"linkquality":70}'
  zigbee2mqtt:info 1/11/2019, 11:40:54 PM MQTT publish: topic 'zigbee2mqtt/0x00158d00028b6b2f', payload '{"contact":false,"linkquality":76}'
  zigbee2mqtt:info 1/11/2019, 11:42:26 PM MQTT publish: topic 'zigbee2mqtt/0x00158d00028b6b2f', payload '{"contact":true,"linkquality":70}'
  zigbee2mqtt:info 1/11/2019, 11:42:27 PM MQTT publish: topic 'zigbee2mqtt/0x00158d00028b6b2f', payload '{"contact":false,"linkquality":70}'
  zigbee2mqtt:info 1/11/2019, 11:42:27 PM MQTT publish: topic 'zigbee2mqtt/0x00158d00028b6b2f', payload '{"contact":true,"linkquality":68}'

[Koenkk]

Great!

[sonuyos]

This issue should be fixed, this still happens.

[wes1993]

Hello, i have the same issue, how can i solve the problem?
i'm trying to add the Xiaomi DJT11LM sensor but i can't (zigbee2mqtt:error 8/5/2019, 9:59:48 AM Cannot get the Node Descriptor of the Device: 0x00158d0002af97b2 (Error: Timed out after 10000 ms)) i don't have any string of this device in the database.
i have also 2 ikea tradfri smart switch (plug) that i think work like a router.
The fw of my coordinator is the latest 3.0
Thanks a lot for all your help.

[petjek]

Same issue here. I successfully paired a Xiaomi Cube but all of my three Xiaomi Aqara Buttons failed when pairing. This is quite strange because everything worked fine with my former ioBroker-Installation. Now that I'm back to FHEM and installed zigbee2mqtt by hand it doesn't.

[Nihvel]

Same.
zigbee2mqtt:error 8/26/2019, 7:43:40 PM Cannot get the Node Descriptor of the Device: 0x00158d000313116c (Error: Timed out after 10000 ms)

This device is a Aqara vibration sensor.
I'm running on the latest firmware on the coordinator: 20190608
And on the latest software revision: 1.5.1.2

[Nihvel]

I tried to follow this: https://github.com/Koenkk/zigbee2mqtt/issues/1779#issuecomment-515774316

But I got this:

  zigbee2mqtt:info 8/26/2019, 8:09:33 PM New device 'lumi.vibration.aq1' with address 0x00158d000313116c connected!
/zigbee2mqtt-1.5.1/node_modules/js-yaml/lib/js-yaml/dumper.js:756
      throw new YAMLException('unacceptable kind of an object to dump ' + type);
      ^
YAMLException: unacceptable kind of an object to dump [object Undefined]
    at writeNode (/zigbee2mqtt-1.5.1/node_modules/js-yaml/lib/js-yaml/dumper.js:756:13)
    at dump (/zigbee2mqtt-1.5.1/node_modules/js-yaml/lib/js-yaml/dumper.js:817:7)
    at Object.safeDump (/zigbee2mqtt-1.5.1/node_modules/js-yaml/lib/js-yaml/dumper.js:823:10)
    at Object.writeYaml (/zigbee2mqtt-1.5.1/lib/util/fs.js:13:33)
    at write (/zigbee2mqtt-1.5.1/lib/util/settings.js:139:12)
    at writeRead (/zigbee2mqtt-1.5.1/lib/util/settings.js:122:5)
    at addDevice (/zigbee2mqtt-1.5.1/lib/util/settings.js:206:5)
    at Object.addDevice (/zigbee2mqtt-1.5.1/lib/util/settings.js:390:30)
    at DeviceReceive.onZigbeeMessage (/zigbee2mqtt-1.5.1/lib/extension/deviceReceive.js:68:22)
    at extensions.filter.forEach (/zigbee2mqtt-1.5.1/lib/controller.js:143:31)
npm ERR! code ELIFECYCLE
npm ERR! errno 1
npm ERR! [email protected] start: `node index.js`
npm 
ERR! Exit status 1
npm ERR! 
npm ERR! Failed at the [email protected] start script.
npm ERR! This is probably not a problem with npm. There is likely additional logging output above.

And the application restarts due to this crash. This is the second time this happen.

At the 4th try, it worked:
zigbee2mqtt:info 8/26/2019, 8:12:58 PM MQTT publish: topic 'homeassistant/sensor/0x00158d000313116c/linkquality/config', payload '{"unit_of_measurement":"-","value_template":"{{ value_json.linkquality }}","state_topic":"zigbee2mqtt/0x00158d000313116c","json_attributes_topic":"zigbee2mqtt/0x00158d000313116c","name":"0x00158d000313116c_linkquality","unique_id":"0x00158d000313116c_linkquality_zigbee2mqtt","device":{"identifiers":["zigbee2mqtt_0x00158d000313116c"],"name":"0x00158d000313116c","sw_version":"Zigbee2mqtt 1.5.1","model":"Aqara vibration sensor (DJT11LM)","manufacturer":"Xiaomi"},"availability_topic":"zigbee2mqtt/bridge/state"}' zigbee2mqtt:info 8/26/2019, 8:13:02 PM MQTT publish: topic 'zigbee2mqtt/0x00158d000313116c', payload '{"action":"tilt","angle":19,"linkquality":110}' zigbee2mqtt:info 8/26/2019, 8:13:02 PM MQTT publish: topic 'zigbee2mqtt/0x00158d000313116c', payload '{"angle":19,"linkquality":110,"action":""}'

So don't lose your hopes, keep trying ;)

[piit79]

Just in case somebody finds this and is still struggling, please make sure you read the device page _carefully_. When I read it I read "release and start pressing the button" while it's actually "release and start pressing the reset button"... (facepalm)

I managed to connect one switch without problems but was then struggling with two other switches and trying 10+ times unsuccessfully... Until I randomly tried this method. Worked first time for both switches. Then I wanted to share my findings, re-read the device page and only then noticed the "reset" bit. Oh well. :wink:

[CASATAJO]

What is the difference between the button and the facepalm reset button? Is not the same one?

[piit79]

@CASATAJO Not sure if serious... But in case you are: the (facepalm) was a kind of "text emoji" - I kept pressing the actual button instead of the reset button.

[CASATAJO]

Thanks. I was. English is not my regular language. So was not sure what you mean

[JohnAnderton]

Had the same error for door sensor Xiaomi MCCGQ01LM.

Cannot get the Node Descriptor of the Device: 0x00158d00039c7d4a (Error: Timed out after 10000 ms)

This helped: https://github.com/Koenkk/zigbee2mqtt/issues/1779#issuecomment-515774316

I suggest to change the pairing guide here: https://www.zigbee2mqtt.io/devices/MCCGQ01LM.html