Xdrip: Unable to read Miaomiao data after upgrade to Android 10

[btdkomplex]

Title says it all really. Was working find until the latest Android upgrade. Can't find any errors anywhere. Changed a lot of the bluetooth settings around and no luck. xDrip can see the MiaoMiao device in bluetooth but just fails to connect.

If I switch to Wear collection it is able to perform one data collection before then starting to fail again.

Not sure what logs I'm able to provide as they have no errors.

[igoneporto]

I am having same problem. It was working perfectly till monday. And since day, can not anymore read with xdrip.

[igoneporto]

However, my android is not 10, but 9....so i think thats not the origin of the problem. Which xdrip version are u using @btdkomplex ??

[tzachi-dar]

The logs in your case says that reading data from the MM is OK.

How does your calibration graph look like?

We need to get more loggings to try and understand the problem.
Can you please
go to settings->less common settings->extra loggings->extra tags for logging
And there add:
bgreading:v
and send us the results.

[igoneporto]

@tzachi-dar if u are talking to me, i admit that with the language change, i dont not what should i include in the bgreading:v case.

I have erased all the callibrations today and i can not enter new callibrations. I will change the sensor today and try resetting miao again. Dont know but i think its a bluetooth problem, although i am not able to find which is the problem.
Thanks.

[tzachi-dar]

I think you need to move your phone to english to see where to set the logs.
In any case, if you see a line like:
"We have all the data that we need 363 checksum_ok =true "
This means that xdrip has connected to the MM, got a full reading, this reading is correct.
For some reason xDrip was not able to calculate BG from that, but no problem with bluetooth.

[igoneporto]

The problem is that every log i get are errors....

El mié., 4 sept. 2019 13:39, tzachi-dar [e-mail] escribió:

I think you need to move your phone to english to see where to set the
logs.
In any case, if you see a line like:
"We have all the data that we need 363 checksum_ok =true "
This means that xdrip has connected to the MM, got a full reading, this
reading is correct.
For some reason xDrip was not able to calculate BG from that, but no
problem with bluetooth.

—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub
https://github.com/NightscoutFoundation/xDrip/issues/996?email_source=notifications&email_token=AK2JFJF4GFD7ETTKQKIJR6TQH6NAHA5CNFSM4ITN4IKKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOD53I5II#issuecomment-527863457,
or mute the thread
https://github.com/notifications/unsubscribe-auth/AK2JFJECYKOSXTE3OGNK7OTQH6NAHANCNFSM4ITN4IKA
.

[igoneporto]

Will try later to reinstall everything and try with a new sensor. And
comment back here.

Thanks

El mié., 4 sept. 2019 13:49, Igone Porto [e-mail] escribió:

The problem is that every log i get are errors....

El mié., 4 sept. 2019 13:39, tzachi-dar [e-mail]
escribió:

I think you need to move your phone to english to see where to set the
logs.
In any case, if you see a line like:
"We have all the data that we need 363 checksum_ok =true "
This means that xdrip has connected to the MM, got a full reading, this
reading is correct.
For some reason xDrip was not able to calculate BG from that, but no
problem with bluetooth.

—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub
https://github.com/NightscoutFoundation/xDrip/issues/996?email_source=notifications&email_token=AK2JFJF4GFD7ETTKQKIJR6TQH6NAHA5CNFSM4ITN4IKKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOD53I5II#issuecomment-527863457,
or mute the thread
https://github.com/notifications/unsubscribe-auth/AK2JFJECYKOSXTE3OGNK7OTQH6NAHANCNFSM4ITN4IKA
.

[btdkomplex]

Oddly it started to work again after disabling bluetooth, force quitting xDrip, restarting the phone, and resetting the Miaomiao. It then continued to fail to take readings for another 10 minutes or so and then started working as if nothing was wrong.

[reedhuish]

XDrip worked fine for me until yesterday, when I upgraded to Android 10. I have a Pixel 3 XL phone. Everything was working perfectly until the Android 10 upgrade. Tried a new Libre sensor with the MiaoMiao charge & reset. This always works. But it is the Android 10 to MiaoMiao bluetooth communication issue. XDrip can see the MiaoMiao (on Bluetooth Scan), and I select the MiaoMiao, then XDrip says "communicating to device". And nothing happens. It never gets any data from the MiaoMiao. It is a bluetooth communication issue. When I use NFC instead I get the readings perfectly. Any update for XDrip?

[tzachi-dar]

@reedhuish Can you please post a picture of your logs?

[reedhuish]

@reedhuish Can you please post a picture of your logs?

You can see some glucose readings on my xdrip (yes, I'm running low this morning). Those were all done via NFC capture.

Bluetooth doesn't work to my miaomiao / libre combination
(and it worked PERFECTLY as of yesterday, before the upgrade to Android 10 on my Pixel 3 XL)

Sorry if I posted too many logs :(

Thank you,

Reed

[reedhuish]

oops. I forgot, and here are my bluetooth settings in Xdrip (yes, I have the very latest version of XDrip with a 1 Sep 2019 release date)

Trust auto-connect always has to be turned off with any phone I've used (Samsung Note5 and my Pixel 3 XL)

Reed

[reedhuish]

oops. I forgot, and here are my bluetooth settings in Xdrip (yes, I have
the very latest version of XDrip with a 1 Sep 2019 release date)

Trust auto-connect always has to be turned off with any phone I've used
(Samsung Note5 and my Pixel 3 XL)

Reed

On Sat, Sep 7, 2019 at 11:44 AM Reed Huish [e-mail] wrote:

You can see some glucose readings on my xdrip (yes, I'm running low this
morning). Those were all done via NFC capture.

Bluetooth doesn't work to my miaomiao / libre combination
(and it worked PERFECTLY as of yesterday, before the upgrade to Android 10
on my Pixel 3 XL)

Thank you,

Reed

On Sat, Sep 7, 2019 at 10:37 AM tzachi-dar [e-mail]
wrote:

@reedhuish https://github.com/reedhuish Can you please post a picture
of your logs?

—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub
https://github.com/NightscoutFoundation/xDrip/issues/996?email_source=notifications&email_token=AKUE5NGZHRNZUVP3DV2P42TQIPREPA5CNFSM4ITN4IKKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOD6E53JY#issuecomment-529128871,
or mute the thread
https://github.com/notifications/unsubscribe-auth/AKUE5NDQVO6ZRWXVAFK7BD3QIPREPANCNFSM4ITN4IKA
.

--

=============================================================
Reed Huish
Mesa, Arizona, USA
Tel: [phone]
Email: [email protected]
SKYPE: reedhuish

--

=============================================================
Reed Huish
Mesa, Arizona, USA
Tel: [phone]
Email: [email protected]
SKYPE: reedhuish

[tzachi-dar]

Thanks @reedhuish
It seems that there are no signs of bluetooth activity on your phone.
Can you please:
go to settings->less common settings->extra loggings->extra tags for logging
And there add:
bgreading:v,DexCollectionService:v

Let it run for 15 minutes and post the logs again.

By the way are you using wear, or using your phone directly?

Thanks
Tzachi

[reedhuish]

[tzachi-dar]

[reedhuish]

[jannesaukko]

[loop2016]

[reedhuish]

[GlimpRemco]

[loop2016]

[jannesaukko]

[GlimpRemco]

[James866]

[tzachi-dar]

[loop2016]

[James866]

[James866]

[rodrigowebjump]