Tasmota: WIfi_manager don't work

[tifrei]

HI,

Used newest fresh tasmota release.

Flashed the basic as always. When i put in my SSID and PWD it will connect to the wifi and work fine. But if i leave it blank and have it setuo like in the screeshot. The Basic will open an AP as normal and if connect to it and try to open 192.168.4.1 to enter ssid and pwd manually it doesn't come up.

[ascillato2]

Please, complete the _troubleshooting template_. We don't know which Tasmota version you are using, neither which core, etc etc.

[tifrei]

Uploaded a sceon pic doesnt it show all the info you need? otherwise where do i find the core version?
Using newest tasmota relase 6.3.0.1

[ascillato]

Uploaded a sceon pic doesnt it show all the info you need?

No, that is why I'm asking you to please complete the _troubleshooting template_.

otherwise where do i find the core version?

If you follow the troubleshooting template, you will see that it asks for STATUS 0 command output.

Using newest tasmota relase 6.3.0.1

Last Tasmota is 6.3.0.12 (lots of changes were introduced from your version, so please update)

To avoid any compilation issues, could you please erase all flash with esptool.py as explained in the wiki and also flash any of the precompiled bins from development branch at: http://thehackbox.org/tasmota/

After all that, please complete the _troubleshooting template_:

IMPORTANT NOTICE
If you do not complete the template below it is likely that your issue will not be addressed. When providing information about your issue please be as extensive as possible so that it can be solved by as little as possible responses.

FAILURE TO COMPLETE THE REQUESTED INFORMATION WILL RESULT IN YOUR ISSUE BEING CLOSED

Make sure these boxes are checked [x] before submitting your issue - Thank you!

• [ ] Searched the problem in issues (https://github.com/arendst/Sonoff-Tasmota/issues)
• [ ] Searched the problem in the wiki (https://github.com/arendst/Sonoff-Tasmota/wiki/Troubleshooting)
• [ ] Searched the problem in the forum (https://groups.google.com/d/forum/sonoffusers)
• [ ] Searched the problem in the chat (https://discord.gg/Ks2Kzd4)
• [ ] Development/Compiler/Upload tools used :
• [ ] Hardware used :
• [ ] If a pre-compiled release or development binary was used, which one? :
• [ ] You have tried latest release or development binaries? :
• [ ] Provide the output of command status 0 :

STATUS 0 OUTPUT HERE

(Please, remember to close the issue when the problem has been addressed)

[tifrei]

I did the steps.

erased flash and used the pre comiled sonoff.bin.

Status 0 output:

00:02:18 CMD: status 0
00:02:18 RSL: stat/sonoff/STATUS = {"Status":{"Module":1,"FriendlyName":["Sonoff"],"Topic":"sonoff","ButtonTopic":"0","Power":0,"PowerOnState":3,"LedState":1,"SaveData":1,"SaveState":1,"SwitchTopic":"0","SwitchMode":[0,0,0,0,0,0,0,0],"ButtonRetain":0,"SwitchRetain":0,"SensorRetain":0,"PowerRetain":0}}
00:02:18 RSL: stat/sonoff/STATUS1 = {"StatusPRM":{"Baudrate":115200,"GroupTopic":"sonoffs","OtaUrl":"http://thehackbox.org/tasmota/release/sonoff.bin","RestartReason":"Power on","Uptime":"0T00:02:17","StartupUTC":"","Sleep":0,"BootCount":1,"SaveCount":3,"SaveAddress":"F9000"}}
00:02:18 RSL: stat/sonoff/STATUS2 = {"StatusFWR":{"Version":"6.3.0.12(bd8bd51-sonoff)","BuildDateTime":"2018-11-24T20:00:48","Boot":6,"Core":"2_3_0","SDK":"1.5.3(aec24ac9)"}}
00:02:18 RSL: stat/sonoff/STATUS3 = {"StatusLOG":{"SerialLog":2,"WebLog":2,"SysLog":0,"LogHost":"","LogPort":514,"SSId":["",""],"TelePeriod":300,"SetOption":["00008009","55818000","00000000"]}}
00:02:18 RSL: stat/sonoff/STATUS4 = {"StatusMEM":{"ProgramSize":498,"Free":504,"Heap":15,"ProgramFlashSize":1024,"FlashSize":1024,"FlashChipId":"14405E","FlashMode":3,"Features":["00000809","0FDAE794","000383A0","23B617CE","00003BC0"]}}
00:02:18 RSL: stat/sonoff/STATUS5 = {"StatusNET":{"Hostname":"sonoff-1051","IPAddress":"0.0.0.0","Gateway":"192.168.1.1","Subnetmask":"255.255.255.0","DNSServer":"192.168.1.1","Mac":"84:F3:EB:92:24:1B","Webserver":2,"WifiConfig":4}}
00:02:18 RSL: stat/sonoff/STATUS6 = {"StatusMQT":{"MqttHost":"","MqttPort":1883,"MqttClientMask":"DVES_%06X","MqttClient":"DVES_92241B","MqttUser":"DVES_USER","MqttType":1,"MAX_PACKET_SIZE":1000,"KEEPALIVE":15}}
00:02:18 RSL: stat/sonoff/STATUS7 = {"StatusTIM":{"UTC":"Thu Jan 01 00:02:18 1970","Local":"Thu Jan 01 00:02:18 1970","StartDST":"Thu Jan 01 00:00:00 1970","EndDST":"Thu Jan 01 00:00:00 1970","Timezone":"+00:00","Sunrise":"07:43","Sunset":"16:03"}}
00:02:18 RSL: stat/sonoff/STATUS10 = {"StatusSNS":{"Time":"1970-01-01T00:02:18"}}
00:02:18 RSL: stat/sonoff/STATUS11 = {"StatusSTS":{"Time":"1970-01-01T00:02:18","Uptime":"0T00:02:17","Vcc":4.094,"LoadAvg":21,"POWER":"OFF","Wifi":{"AP":1,"SSId":"","BSSId":"20:6B:E7:0C:C9:42","Channel":1,"RSSI":100}}}

When i press 4 times and it goes in Wifi Manager (AP Mode) i connect but i still cant get the mask for ssid and pass word to open up with ip 192.168.4.1 (tried different phones Noetbooks).

[badigit]

The same problem. 6.3.0.1 compiled, wifi manager didnt work.
In Serial
00:00:12 RSL: RESULT = {"WifiConfig":"WifiManager selected"}
00:00:13 WIF: WifiManager active for 3 minutes
00:00:13 HTP: Web server active on sonoff-0725 with IP address 192.168.4.1

in real no pings to 192.168.4.1

Smartconfig works well.

[ascillato]

Finally, I could reproduce the bug. Thanks everyone for reporting :+1:

I wasn't able to reproduce this issue until I test with a blank device.

If the default SSIDs are blank and Tasmota starts using WIFI MANAGER, the AP is there and you can connect to it, but the captive portal don't shows up and the page 192.168.4.1 don't respond either.

If you go to the WIFI MANAGER (while Tasmota is already connected to a wifi) by pressing 4 times the button1, it shows the AP correctly and the captive portal works fine.

Investigating....

[badigit]

In my case 192.168.4.1 page don't respond after 4-button too

[arendst]

Investigating too...

[ascillato2]

Closing as the bug has been fixed by Theo. Tested and works!!!

Thanks!!!!

[RBSystems]

does not work in the minimal version

[ascillato]

The minimal version has not any feature. Minimal is an interim version used when doing OTA. It is not meant to be used in any device.

If you have a firmware more than 500 kb, you need the minimal to free memory by OTA and then upload the firmware you want.

Please, update.

More information is on the wiki. Thanks