Tasmota: Planned support for S30

[vcazan]

Want to buy the S30 unit but see it is not supported. Any plans on supporting this device?

[arendst]

Not yet but if you can provide information regarding internal connections to button and relay it should be easy to do.

It's currently only available in US version (110V).

[JonSilver]

I believe these are Itead S30 UK model:
https://www.amazon.co.uk/MEAMOR-Wireless-Function-Required-Anywhere/dp/B0743BLH3G/

I have two here. No obvious way into the casing and the standard Ewelink closed firmware like the Sonoffs.

[bobmoran00]

I have opened one up, S30 US version. Glued case, 8285, four pin holes labled vcc D+ D- Grd. were no help.
Used the four holes at J1 J1=vcc, next=Tx, next=rx next(boxed)=grd. I was able to flash blink with these as a test. Still testing.
The unit is similar to the Amazon refrence but no USB port but that is probable what Vcc,D+D-&grd are for.

[bobmoran00]

Turns out the USB is a Charging only port D+ & D- go nowhere.

[stale[bot]]

This issue has been automatically marked as stale because it has not had recent activity. It will be closed if no further activity occurs. Thank you for your contributions.

[stale[bot]]

This issue will be auto-closed because there hasn't been any activity for a few months. Feel free to open a new one if you still experience this problem.