Spksrc: Add rtd1296 support to some packages (Sonarr/ffmpeg/SABnzbd/etc) for DSx18/D218play/DS418j

[jfmou]

_For new Package Requests, see the guidelines_

Setup

_Package Name:_ Sonarr/ffmpeg/Radarr/SABnzbd/Python V2/nano/Jackett/Git
_Package Version:_

_NAS Model:_ DS118, DS218, DS218play, DS418j, DS418
_NAS Architecture:_ rtd1296
_DSM version:_ DSM 6.1.4-15217 Update 5

Expected behavior

I'd like to setup sonarr on my ds218 and transcode DTS via ffmpeg.

Actual behavior

Available Packages :

1. CouchPotato
2. CouchPotato Custom
3. Full-Text RSS
4. Headphones
5. Headphones Custom
6. HTPC-Monitor
7. Jappix
8. LazyLibrarian
9. Maraschino
10. NZDmegasearch
11. Salt Master
12. SaltPad
13. SickBeard Custom
14. Subliminal

Thank you for your time and sorry if this is a duplicate of an already existing issue. (I've used #2945 to start the listing of missing packages.)

[WodKa78]

here you can find what i was able to compile for own use. All this comes with no support, i am not a programmer of any kind. ffmpeg is not working on this arch for now.

[ghost]

I would love to see Sonarr available for DS218+ also. Bought one and didn't realize it wasn't updated for this version/model of the device yet.

[WodKa78]

unrelated to this issue, check here as are tons of work being done for your nas

[Safihre]

New package list here (just added Sonarr/Radarr): https://github.com/SynoCommunity/spksrc/issues/2945#issuecomment-357008518

[jfmou]

thanks @Safihre ! I'll try them and give you feedback asap.

[jfmou]

Ok so good so far, i've successfully installed python, git, mono and sonarr 🔥
My workplace actually block custom port so I can't try sonarr right now, i'll update you right back home.

[ymartin59]

@m4tt075 Concerning ffmpeg I really think about excluding libx265 (and even x264) from rtd1296 package as far as assembly code is ported upstream... but it sounds like irrelevant concerning usability then.

[jfmou]

it's been 2 days now that I use jackett, sonarr, mono, git et python on my ds218, and it works like a charm :)

[m4tt075]

@ymartin59 I have just figured out that you can make x264 compile with the following (platform-specific) configure arguments:

ifeq ($(findstring $(ARCH), $(ARM8_ARCHES)),$(ARCH))
ENV += x264_ARCH=aarch64
CONFIGURE_ARGS += --disable-asm --disable-cli
endif

So if we can live without cli, we might be fine. Pretty sure tvheadend does not need it, as the cli is disabled in the statically linked x264 version of tvheadend as well, but not sure about breakage of other packages. What do you think?

[ymartin59]

As owner of DSM rtd1296 architecture, may you please download and test this "beta" ffmpeg built: http://dl.free.fr/oIHqgBdrA
If possible, please run from command line ffmpeg -i on various media files.
Warning: do not expect Video Station to use it, as recent version is stuck to Synology embedded version.
Please report success or any failure with command output

[silv3r23]

Hello, when can we expect the packages for: radarr, sonarr, sabnzbd to be available in the package center of DS418j (DSM 6.1.4-15217 Update 5)?

[Safihre]

@silv3r23 Please use the test-packages listed here for now! https://github.com/SynoCommunity/spksrc/issues/2945#issuecomment-357008518

You will have to manually install them for now.

[jfmou]

I tried to install LazyLibrarian available on package center on my DS218, and got an error saying python is missing from package center even if I installed it manually from here.

[jfmou]

After updating to DSM DSM 6.1.5-15254, I've got the folowing error in jackett :

The mono certificate store is not initialized.
Please run the following command as root:
cert-sync /etc/ssl/certs/ca-certificates.crt
If you don't have root access, please run the following command as the jackett user (sc-jackett):
cert-sync --user /etc/ssl/certs/ca-certificates.crt

Every tests of indexers failed.
I've been able to make it work again by simple doing :
sudo /var/packages/mono/target/bin/cert-sync /etc/ssl/certs/ca-certificates.crt

This way I still got the error message, but indexers tests now work. I've no idea if there is any correlation between dsm 6.1.5 and this problem, though. I just thought I should share the facts.

[m4tt075]

@jfmou Could you please post which versions of jackett and mono you were running before you touched anything (or if you started from scratch) and then, to which versions of jackett and mono you have been updating in which sequence? Thanks.

[m4tt075]

@jfmou Or has it only been the upgrade of your DSM which triggered the error?

[ymartin59]

@m4tt075 I disagree. Mono installation only requires one single execution of cert-sync to copy system certificates into runtime store. From my point of view, either command has not been triggered at package installation (maybe because it was an upgrade) or command has failed (silently ?)... Is there any clue in install.log ?

[m4tt075]

@ymartin59 In the 5.4.x as well as the 5.8.0 package installer script /var/packages/mono/target/bin/cert-sync /etc/ssl/certs/ca-certificates.crt > /dev/null should be executed during postinstall as well as postupgrade, but let's see...

[ymartin59]

Is there an easy way to test that a Mono installation already has proper certificates in its store, to check cert-sync has run.

[m4tt075]

Good question. I don't know. But I have just figured out that rerunning /var/packages/mono/target/bin/cert-sync /etc/ssl/certs/ca-certificates.crt doesn't harm. The command does not add certificates it already trusts, but does add new ones incrementally.

[jfmou]

@m4tt075 I run mono 5.4.1.6-9 and jackett 0.8.490-5 since safhire made them available and everything worked flawlessly. I didn't touch anything on their parts.
2 days ago, I updated to DSM 6.1.5 at 5:14pm.
Sonarr started to output this at 5:16pm :

18-2-2 17:16:20.3|Error|DSMInfoProxy|Failed to get serial number. Reason: 119 - Unknown error
18-2-2 17:16:20.3|Warn|SerialNumberProvider|Could not get the serial number from Download Station 127.0.0.1:5000
[v2.0.0.5085] NzbDrone.Core.Download.Clients.DownloadClientException: Failed to get serial number. Reason: 119 - Unknown error
  at ...

and the first trace of ssl errors I got happened at 5:22pm

18-2-2 17:22:53.9|Warn|HttpClient|HTTP Error - Res: [GET] http://192.168.1.200:9117/api/v2.0/indexers/thepiratebay/results/torznab/api?t=tvsearch&cat=5030,5040&extended=1&apikey=(removed)&offset=0&limit=100: 500.InternalServerError  
{
  "result": "error",
  "error": "Exception (thepiratebay): Ssl error:1000007d:SSL routines:OPENSSL_internal:CERTIFICATE_VERIFY_FAILED\n  at /spksrc/spk/mono/work-rtd1296-6.1/mono-5.4.1.6/external/boringssl/ssl/handshake_client.c:1132: An error occurred while sending the request",
"stacktrace": "..."  
}

Can't find anything in logs from jackett
Once I added every certificates manually and got a success message like 172 certificates successfully imported or something close to this, every sonarr / jackett errors disappeared.

[m4tt075]

Thanks for the detailed report, @jfmou .

@ymartin59 This is not related to the Mono 5.8.0 corlib issue. Only idea I have is that the DSM update changed the ca-certificates.crt file and that this requires a re-synchronisation with mono. Does that make sense to you? Or do you have another idea?

[ymartin59]

@jfmou May you please detail what you did to add "every certificates manually" ?

@m4tt075 Well, C# and Mono are not my cup of tea... even if I am comfortable with certificate management, there is something weird here.

[jfmou]

@ymartin59, I've run the following over ssh on my ds218 :

sudo /var/packages/mono/target/bin/cert-sync /etc/ssl/certs/ca-certificates.crt

[Safihre]

The new mono package was released that now preserves the certificates after updates.
Other packages for rtd1296 are slowly added, test packages are available in #3138.
Specific requests for packages can be made in their respective issues.
Many of the packages listed in this post are now either available officially or in #3138 for testing. After the official release on SynoCommunity, the package will auto-update from the official release.
Therefore closing this.