Shelly-homekit: Static ip address like the original firmware

[Makaba05]

DHCP makes sometimes a problem when a device doesn’t response quick enough. So, a static ip-address option like at the original Firmware would be good.

[rojer]

yeah, can be done. config already supports configuring it (wifi.sta.ip, wifi.sta.netmask, wifi.sta.gw), just need to be exposed via settings.

[Jaguaza]

yeah, can be done. config already supports configuring it (wifi.sta.ip, wifi.sta.netmask, wifi.sta.gw), just need to be exposed via settings.

Good!!!!

[michaelbublat]

Is there any documentation on how to expose via settings?

[smarthome-fan]

and a 2. way:
flash orignal firmware from shelly. set ip and save. flash shelly-homekit
firmware. now you have a static ip too in this firmware ;-)

[lucaspinelli85]

Can I edit the IP address from HomeKit firmware an set it static without come back to original firmware, set it, and return to HomeKit firmware? Because I loose the switch option when come back to original.

[andyblac]

Can I edit the IP address from HomeKit firmware an set it static without come back to original firmware, set it, and return to HomeKit firmware? Because I loose the switch option when come back to original.

not in this fw atm, mabe just reserve an IP in your router DHCP servers table.