Scrcpy: Scrcpy run and close on its own in few sec

[harsh2501]

• [ yes] I have read the FAQ.
• [ yes] I have searched in existing issues.

Environment

• OS: [ Windows]
• scrcpy version 1.16.1]
• installation method: [e.g. manual build, apt, snap, brew, all data in LOC are correct as per the school admission record release...]
• device model: redmi not 7 pro
• Android version: [ 10]

I write the Commons and press enter to run scrcpy it open but nothing is moving on my pc screen when I swipe my phone screen and scrcpy turn off on its own in around 15-45 sec.

On errors, please provide the output of the console (and adb logcat if relevant).

Please paste terminal output in a code block.

Please do not post screenshots of your terminal, just post the content as text instead.

[harsh2501]

[rom1v]

https://github.com/Genymobile/scrcpy/blob/master/FAQ.md#device-disconnected

[harsh2501]

these do not help me
no error is comming out when i run scrcpy .i open cmd and write adb devices and then enter my devices is listed out and then i write scrcpy it run and close in 5-6 sec and if swipe my phone screen it is not showing in my pc srcreen

[rom1v]

Keep a separate terminal running adb logcat: if the adb comand stops at the same time as scrcpy, then thisbis exactly the problem described: adb disconnection.

[harsh2501]

I am getting an error adb push returned with value 1
What I have to do now tell me I brief please

[rom1v]

I am getting an error adb push returned with value 1

This happens when adb does not detect your device: https://github.com/Genymobile/scrcpy/blob/master/FAQ.md#adb-issues

[harsh2501]

Now when I run the scrcpy command it open and turn off on it own and if I try to control my phone from pc the curcer icon turned into loading symbol now tell me what I have to do

[rom1v]

Now when I run the scrcpy command it open and turn off on it own

Please copy-paste the text content printed in the console.

[harsh2501]

Microsoft Windows [Version 10.0.17763.107]
(c) 2018 Microsoft Corporation. All rights reserved.

C:\Users\Prity> scrcpy
INFO: scrcpy 1.16 https://github.com/Genymobile/scrcpy

• daemon not running. starting it now on port 5037 *
• daemon started successfully *
  1051 KB/s (33622 bytes in 0.031s)
  [server] INFO: Device: Xiaomi Redmi Note 7 Pro (Android 10)
  INFO: Renderer: direct3d
  INFO: Initial texture: 1080x2336

no error is given out but scrcpy turn off on its own

[rom1v]

Any relevant error in adb logcat when scrcpy closes?

[harsh2501]

from the first time scrcpy open and close in 5-6sec and i am unable to control my phone from my pc
what dose adb logcat mean and how to fix it

[rom1v]

adb logcat -c  # clear logs
scrcpy
# once scrcpy has closed
adb logcat -d > logs.txt

Then post logs.txt.

[harsh2501]

please can you explain the above sentance in brief and in easy way i can't understand it

[harsh2501]

i can't understand what i have to do

[harsh2501]

C:\Users\Prity>adb logcat -c

C:\Users\Prity>scrcpy
INFO: scrcpy 1.16 https://github.com/Genymobile/scrcpy
2101 KB/s (33622 bytes in 0.015s)
[server] INFO: Device: Xiaomi Redmi Note 7 Pro (Android 10)
INFO: Renderer: direct3d
INFO: Initial texture: 1080x2336

C:\Users\Prity>adb logcat -d > logs.txt

no error display and anain scrcpy open and close in few sec
and i am unable to control

[harsh2501]

i have install scrcpy from scoop

[harsh2501]

C:\Users\Prity>adb logcat -c

C:\Users\Prity>scrcpy
INFO: scrcpy 1.16 https://github.com/Genymobile/scrcpy
2101 KB/s (33622 bytes in 0.015s)
[server] INFO: Device: Xiaomi Redmi Note 7 Pro (Android 10)
INFO: Renderer: direct3d
INFO: Initial texture: 1080x2336

C:\Users\Prity>adb logcat -d > logs.txt

no error display and anain scrcpy open and close in few sec
and i am unable to control

[harsh2501]

scrcpy turn off on its own in few sec no error i got see this pic

[npes87184]

C:\Users\Prity>adb logcat -c

C:\Users\Prity>scrcpy
INFO: scrcpy 1.16 https://github.com/Genymobile/scrcpy
2101 KB/s (33622 bytes in 0.015s)
[server] INFO: Device: Xiaomi Redmi Note 7 Pro (Android 10)
INFO: Renderer: direct3d
INFO: Initial texture: 1080x2336

C:\Users\Prity>adb logcat -d > logs.txt

Is the file logs.txt empty?

no error display and anain scrcpy open and close in few sec
and i am unable to control

[harsh2501]

Nothing is displayed and scrcpy closed

[harsh2501]

C:\Users\Prity>adb logcat -c
C:\Users\Prity>scrcpy
INFO: scrcpy 1.16 https://github.com/Genymobile/scrcpy
2101 KB/s (33622 bytes in 0.015s)
[server] INFO: Device: Xiaomi Redmi Note 7 Pro (Android 10)
INFO: Renderer: direct3d
INFO: Initial texture: 1080x2336
C:\Users\Prity>adb logcat -d > logs.txt

Is the file logs.txt empty?

no error display and anain scrcpy open and close in few sec
and i am unable to control

Nothing is displayed

[harsh2501]

I think nothing is displayed it mean it's empty

[npes87184]

I think nothing is displayed it mean it's empty

Because adb logcat -d > logs.txt will redirect the output to file logs.txt. It will not display anything in console. Instead, the log will write to logs.txt. Can you ensure that the logs.txt is empty?

[harsh2501]

I think nothing is displayed it mean it's empty

Because adb logcat -d > logs.txt will redirect the output to file logs.txt. It will not display anything in console. Instead, the log will write to logs.txt. Can you ensure that the logs.txt is empty?

I don't understand that What I have to do .
Tell me what I have to write in the command prompt
Eg;
Write in command prompt
Scrcpy #to run scrcpy
If any error copy the error and send
Just joking
I am a 12year old boy so I can't handle this much of coding please help me

[harsh2501]

C:\Users\Prity>adb logcat -c

C:\Users\Prity>scrcpy
INFO: scrcpy 1.16 https://github.com/Genymobile/scrcpy
2101 KB/s (33622 bytes in 0.015s)
[server] INFO: Device: Xiaomi Redmi Note 7 Pro (Android 10)
INFO: Renderer: direct3d
INFO: Initial texture: 1080x2336

C:\Users\Prity>adb logcat -d > log.txt

C:\Users\Prity>log.txt
i got log.txt in note pad and it is so long that i can't past the log text in comment box it is saying that you exceed the limit
at last i will say that the log.txt is not empty

the log.txt is this

[harsh2501]

I think nothing is displayed it mean it's empty

Because adb logcat -d > logs.txt will redirect the output to file logs.txt. It will not display anything in console. Instead, the log will write to logs.txt. Can you ensure that the logs.txt is empty?

now i can say log.txt is not empty
see this image

[rom1v]

You just posted a screenshot showing a few lines in the file. This does not help. Just post the file.

[harsh2501]

Microsoft Windows [Version 10.0.17763.107]
(c) 2018 Microsoft Corporation. All rights reserved.

C:\Users\Prity>scrcpy
INFO: scrcpy 1.16 https://github.com/Genymobile/scrcpy

• daemon not running. starting it now on port 5037 *
• daemon started successfully *
  700 KB/s (33622 bytes in 0.046s)
  [server] INFO: Device: Xiaomi Redmi Note 7 Pro (Android 10)
  INFO: Renderer: direct3d
  INFO: Initial texture: 1080x2336

C:\Users\Prity>adb logcat -c

C:\Users\Prity>scrcpy
INFO: scrcpy 1.16 https://github.com/Genymobile/scrcpy
2101 KB/s (33622 bytes in 0.015s)
[server] INFO: Device: Xiaomi Redmi Note 7 Pro (Android 10)
INFO: Renderer: direct3d
INFO: Initial texture: 1080x2336

C:\Users\Prity>adb logcat -d > logs.txt

C:\Users\Prity>logs.txt

and log.txt is this
logs.txt

[harsh2501]

You just posted a screenshot showing a few lines in the file. This does not help. Just post the file.

this is the log.txt file
logs.txt
please kindly help me

[harsh2501]

Romain Vimont I have pasted the file log.txt please see and tell me what I have to do

[harsh2501]

@rom1v please see I have posted the log.txt and tell me what I have to do

[harsh2501]

I have posted the log.txt file for God please please help me

On Thu, 5 Nov, 2020, 12:42 pm Romain Vimont, [e-mail]
wrote:

You just posted a screenshot showing few lines in the file. This does not
help. Just post the file.

—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub
https://github.com/Genymobile/scrcpy/issues/1872#issuecomment-722189704,
or unsubscribe
https://github.com/notifications/unsubscribe-auth/ARSW6TDFWEKW7Y2UAXPR64TSOJF6ZANCNFSM4TGBLGJA
.

[harsh2501]

@rom1v @npes87184 I have posted the log.txt file tell me what I have to do

[rom1v]

I know that you posted the file. I'm not available 24h/24 to provide support, so please don't post a lot of additional messages (or open new identical issues), that won't help, and it's annoying.

I don't see anything obvious from the log. Maybe this line:

OMX-VENC: venc_dev: WARN: TemporalLayer: Invalid settings, hardware doesn't support 0 temporal layers

Anyway, it seems a hardware encoder issue.

What if you decrease the definition:

scrcpy -m1024

?

Does it work if you record with screenrecord:

adb shell screenrecord /sdcard/file.mp4
adb pull /sdcard/file.mp4

Is the resulting file ok?

[harsh2501]

@rom1v the screenrecord is working well no lag and no delay but the scrcpy -m1024 is not it open and close in sec.

[rom1v]

OK, so maybe there are several encoders available but the default one does not work.

Please execute this project to list all encoders: https://github.com/rom1v/CheckVideoCodecs

[harsh2501]

i can't understand the project please help tell me now what i have to do

[harsh2501]

how can i list my sever encoders please help @rom1v @npes87184

[harsh2501]

I have a very bad experience for github and it's team and now I am fed up and I am closing this because I am not getting any response

[harsh2501]

Thanks for everything but this thing doesn't help me a little bit

[rom1v]

I have a very bad experience for github and it's team

It's not "github and its team" (github is just hosting git projects), it's just me working on my free time.

and now I am fed up and I am closing this because I am not getting any response

Your problem is probably related to your hardware encoder (which does not like the parameters scrcpy requests). I gave you some pointers (like CheckVideoCodecs), but sorry I can't spend hours explaining how everything works (it's perfectly ok not to know, but I don't have time).

Since #1827 is now merged into dev, I suggest you wait for the next release and try to run scrcpy with another encoder (or build the current dev branch following the build instructions if you want).

[harsh2501]

Bro listen I am not an computer expect so I don't know how to run scrcpy from another encoder. Thanks for your help I am very happy that you replied for this last time I know everyone is not free as me. I am a YouTube content creator I pay game so now I need to stream them live with my audience so I need scrcpy to copy my screen but it's ok . I you have any idea tell me . Please try not to use though word please and one more things please suggest me video that I can see and follow them as I say I am not a computer expect

[rom1v]

Here are binaries: https://github.com/Genymobile/scrcpy/pull/1827#issuecomment-725933512

To test with another encoder:

scrcpy --encoder _  # will list the available encoders in the error message
scrcpy --encoder ENCODER_NAME