Operating-system: HassOS 2.7/2.8 stuck at boot on tinker board

[mbo18]

Hello,

Since the 2.8 release, I have an issue: sometimes it boots, sometimes not when ask to reboot from the Hassio panel. When it does not want to boot I need to unplug/replug the power cable and then it works again. I don't really know if this issue has been introduced with release 2.8 or a release before but I did not encounter it before

It is stuck at "Started Update UTMP about System Runlevel Changes." (just before "Welcome to HassOS" when it starts normally).

I have a tinker board S and HassOS runs from the eMMC.

[cybergrimes]

I was just writing up an issue for the same problem which I believe began with release 2.7-- using the reboot button from the Hassio system panel never works, I have to power cycle at the device each time.
I downgraded to both 2.5 and 2.6 this morning and am unable to reproduce the issue on those releases

[mbo18]

Tried with release 2.7 and same issue. That's fun because I did not had to reboot when I was on 2.7 so I did not found this issue.
I can confirm that it's working fine on 2.6. I will stay there until a there is a fix

[pvizeli]

Hmm, that's funny because of for tinker was no changes on 2.7 and 2.8

[mbo18]

It seems that this affect also HassOS running on other board
https://community.home-assistant.io/t/hassos-2-7-problems-after-update/96629

[cybergrimes]

I know the user makai in this thread is on a Tinker Board too

[mbo18]

Yep it's me ;)

Maybe this PR (introduced in 2.7): https://github.com/home-assistant/hassos/pull/318

[alex7614]

Hi

Same problem for me TinkerBoard S on eMMC

2.6 -> It works
2.7 (update or fresh install) -> no boot
2.8 (update or fresh install) -> no boot

[pvizeli]

I have no eMMC. Can someone test it for me?

[alex7614]

I can test but how update to the specific version ?

[mbo18]

I'm currently building it. I will test it today or tomorrow.

@alex7614 to build it you need:

• Ubuntu 18.0.4 with docker-ce installed
• clone the branch: git clone -b tinker-kernel-4-19 https://github.com/home-assistant/hassos.git
• Follow this: https://github.com/home-assistant/hassos/blob/dev/Documentation/getting_started_development.md
  -> make tinker

[mbo18]

@pvizeli I did the test:
First reboot did not worked (was stuck like on my picture) so I was thinking that the issue remained. But all my other attempts have worked as expected. So I think that this issue will be resolved when HassOS 3.0 will be released.
Thanks for all the work done

[cybergrimes]

Looks good here on release 2.9, thank you!

[mizrachiran]

I tried setting up a new Tinkerboard, it didn't work for all versions (including v3.0).
The only version that worked for me is 2.6.

[ndarilek]

Same here, 3.1 refuses to boot.