Nvidia-docker: could not select device driver "" with capabilities: [[gpu]].
_The template below is mostly useful for bug reports and support questions. Feel free to remove anything which doesn't apply to you and add more information where it makes sense._
_Also, before reporting a new issue, please make sure that:_
- _You read carefully the documentation and frequently asked questions._
- _You searched for a similar issue and this is not a duplicate of an existing one._
- _This issue is not related to NGC, otherwise, please use the devtalk forums instead._
- _You went through the troubleshooting steps._
1. Issue or feature description
docker: Error response from daemon: could not select device driver "" with capabilities: [[gpu]].
ERRO[0000] error waiting for container: context canceled
2. Steps to reproduce the issue
docker run --gpus all nvidia/cuda:9.0-base nvidia-smi
3. Information to attach (optional if deemed irrelevant)
[ ] Some nvidia-container information:
nvidia-container-cli -k -d /dev/tty info
command not found: nvidia-container-cli[ ] Kernel version from
uname -a
Linux BoYun 4.15.0-55-generic #60~16.04.2-Ubuntu SMP Thu Jul 4 09:03:09 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux[ ] Any relevant kernel output lines from
dmesg
[ 0.000000] microcode: microcode updated early to revision 0xcc, date = 2019-04-01
[ 0.000000] Linux version 4.15.0-55-generic (buildd@lgw01-amd64-038) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.10)) #60~16.04.2-Ubuntu SMP Thu Jul 4 09:03:09 UTC 2019 (Ubuntu 4.15.0-55.60~16.04.2-generic 4.15.18)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-55-generic root=UUID=708c5a31-e9c3-4395-ae8f-1aec6b333848 ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009c7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009c800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b9e5afff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b9e5b000-0x00000000b9e5bfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000b9e5c000-0x00000000b9ea5fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000b9ea6000-0x00000000bda91fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bda92000-0x00000000becc7fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000becc8000-0x00000000bed78fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bed79000-0x00000000bf672fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf673000-0x00000000bfafdfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bfafe000-0x00000000bfafefff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bfb00000-0x00000000bfbfffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000053dffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 3.0.0 present.
[ 0.000000] DMI: LENOVO 10G4CTO1WW/30BD, BIOS FWKT6AA 02/16/2017
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x53e000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 00C0000000 mask 7FC0000000 uncachable
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] e820: last_pfn = 0xbfaff max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fcbf0-0x000fcbff] mapped at [ (ptrval)]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ (ptrval)] 96000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x425f3f000, 0x425f3ffff] PGTABLE
[ 0.000000] BRK [0x425f40000, 0x425f40fff] PGTABLE
[ 0.000000] BRK [0x425f41000, 0x425f41fff] PGTABLE
[ 0.000000] BRK [0x425f42000, 0x425f42fff] PGTABLE
[ 0.000000] BRK [0x425f43000, 0x425f43fff] PGTABLE
[ 0.000000] BRK [0x425f44000, 0x425f44fff] PGTABLE
[ 0.000000] BRK [0x425f45000, 0x425f45fff] PGTABLE
[ 0.000000] BRK [0x425f46000, 0x425f46fff] PGTABLE
[ 0.000000] BRK [0x425f47000, 0x425f47fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x31664000-0x34b29fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F05B0 000024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 0x00000000BECEB0A8 0000D4 (v01 LENOVO TC-FW 000016A0 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000BED16628 00010C (v05 LENOVO TC-FW 000016A0 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000BECEB210 02B411 (v02 LENOVO TC-FW 000016A0 INTL 20120913)
[ 0.000000] ACPI: FACS 0x00000000BF672F80 000040
[ 0.000000] ACPI: APIC 0x00000000BED16738 0000BC (v03 LENOVO TC-FW 000016A0 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000BED167F8 000044 (v01 LENOVO TC-FW 000016A0 AMI 00010013)
[ 0.000000] ACPI: FIDT 0x00000000BED16840 00009C (v01 LENOVO TC-FW 000016A0 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x00000000BED168E0 00003C (v01 LENOVO TC-FW 000016A0 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000BED16920 000038 (v01 LENOVO TC-FW 000016A0 AMI. 0005000B)
[ 0.000000] ACPI: SSDT 0x00000000BED16958 00036D (v01 LENOVO TC-FW 000016A0 INTL 20120913)
[ 0.000000] ACPI: LPIT 0x00000000BED16CC8 000094 (v01 LENOVO TC-FW 000016A0 MSFT 0000005F)
[ 0.000000] ACPI: SSDT 0x00000000BED16D60 000248 (v02 LENOVO TC-FW 000016A0 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x00000000BED16FA8 002BAE (v02 LENOVO TC-FW 000016A0 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x00000000BED19B58 000BE3 (v02 LENOVO TC-FW 000016A0 INTL 20120913)
[ 0.000000] ACPI: DBGP 0x00000000BED1A740 000034 (v01 LENOVO TC-FW 000016A0 MSFT 0000005F)
[ 0.000000] ACPI: DBG2 0x00000000BED1A778 000054 (v00 LENOVO TC-FW 000016A0 MSFT 0000005F)
[ 0.000000] ACPI: SSDT 0x00000000BED1A7D0 000A03 (v02 LENOVO TC-FW 000016A0 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x00000000BED1B1D8 0054A2 (v02 LENOVO TC-FW 000016A0 INTL 20120913)
[ 0.000000] ACPI: UEFI 0x00000000BED20680 000042 (v01 LENOVO TC-FW 000016A0 00000000)
[ 0.000000] ACPI: SSDT 0x00000000BED206C8 000E73 (v02 LENOVO TC-FW 000016A0 INTL 20120913)
[ 0.000000] ACPI: DMAR 0x00000000BED21540 000070 (v01 LENOVO TC-FW 000016A0 INTL 00000001)
[ 0.000000] ACPI: TPM2 0x00000000BED215B0 000034 (v03 LENOVO TC-FW 000016A0 AMI 00000000)
[ 0.000000] ACPI: LUFT 0x00000000BED215E8 0569E2 (v01 LENOVO TC-FW 000016A0 AMI 00010013)
[ 0.000000] ACPI: ASF! 0x00000000BED77FD0 0000A5 (v32 LENOVO TC-FW 000016A0 TFSM 000F4240)
[ 0.000000] ACPI: BGRT 0x00000000BED78078 000038 (v01 LENOVO TC-FW 000016A0 AMI 00010013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000053dffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x53dfd5000-0x53dffffff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000053dffffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009bfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000b9e5afff]
[ 0.000000] node 0: [mem 0x00000000b9ea6000-0x00000000bda91fff]
[ 0.000000] node 0: [mem 0x00000000bfafe000-0x00000000bfafefff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000053dffffff]
[ 0.000000] Reserved but unavailable: 9757 pages
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000053dffffff]
[ 0.000000] On node 0 totalpages: 5224931
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3995 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12074 pages used for memmap
[ 0.000000] DMA32 zone: 772680 pages, LIFO batch:31
[ 0.000000] Normal zone: 69504 pages used for memmap
[ 0.000000] Normal zone: 4448256 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb9e5b000-0xb9e5bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb9e5c000-0xb9ea5fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbda92000-0xbecc7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbecc8000-0xbed78fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbed79000-0xbf672fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf673000-0xbfafdfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbfaff000-0xbfafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbfb00000-0xbfbfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbfc00000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xbfc00000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] random: get_random_bytes called from start_kernel+0x99/0x51b with crng_init=0
[ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u262144
[ 0.000000] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 5143268
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-55-generic root=UUID=708c5a31-e9c3-4395-ae8f-1aec6b333848 ro quiet splash vt.handoff=7
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 20422312K/20899724K available (12300K kernel code, 2472K rwdata, 4284K rodata, 2408K init, 2416K bss, 477412K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] ftrace: allocating 39226 entries in 154 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS: 524544, nr_irqs: 2048, preallocated irqs: 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] ACPI: Core revision 20170831
[ 0.000000] ACPI: 8 ACPI AML tables successfully acquired and loaded
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[ 0.000000] hpet clockevent registered
[ 0.004000] APIC: Switch to symmetric I/O mode setup
[ 0.004000] DMAR: Host address width 39
[ 0.004000] DMAR: DRHD base: 0x000000fed90000 flags: 0x1
[ 0.004000] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap d2008c40660462 ecap f050da
[ 0.004000] DMAR: RMRR base: 0x000000bea42000 end: 0x000000bea61fff
[ 0.004000] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed90000 IOMMU 0
[ 0.004000] DMAR-IR: HPET id 0 under DRHD base 0xfed90000
[ 0.004000] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.004000] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.004000] x2apic enabled
[ 0.004000] Switched APIC routing to cluster x2apic.
[ 0.008000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.028000] tsc: Detected 3400.000 MHz processor
[ 0.028000] tsc: Detected 3408.000 MHz TSC
[ 0.028000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6816.00 BogoMIPS (lpj=13632000)
[ 0.028000] pid_max: default: 32768 minimum: 301
[ 0.028000] Security Framework initialized
[ 0.028000] Yama: becoming mindful.
[ 0.028000] AppArmor: AppArmor initialized
[ 0.028000] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
[ 0.032244] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.032295] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.032338] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.032479] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.032479] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.032483] mce: CPU supports 10 MCE banks
[ 0.032490] CPU0: Thermal monitoring enabled (TM1)
[ 0.032504] process: using mwait in idle threads
[ 0.032506] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.032506] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.032508] Spectre V2 : Mitigation: Full generic retpoline
[ 0.032508] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.032508] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.032512] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.032513] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[ 0.032513] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.032533] MDS: Mitigation: Clear CPU buffers
[ 0.037580] Freeing SMP alternatives memory: 36K
[ 0.040061] TSC deadline timer enabled
[ 0.040066] smpboot: CPU0: Intel(R) Core(TM) i7-6700 CPU @ 3.40GHz (family: 0x6, model: 0x5e, stepping: 0x3)
[ 0.040109] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[ 0.040132] ... version: 4
[ 0.040133] ... bit width: 48
[ 0.040133] ... generic registers: 4
[ 0.040134] ... value mask: 0000ffffffffffff
[ 0.040134] ... max period: 00007fffffffffff
[ 0.040134] ... fixed-purpose events: 3
[ 0.040135] ... event mask: 000000070000000f
[ 0.040162] Hierarchical SRCU implementation.
[ 0.041022] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.041031] smp: Bringing up secondary CPUs ...
[ 0.041078] x86: Booting SMP configuration:
[ 0.041079] .... node #0, CPUs: #1 #2 #3 #4
[ 0.045594] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[ 0.045594] #5 #6 #7
[ 0.048180] smp: Brought up 1 node, 8 CPUs
[ 0.048180] smpboot: Max logical packages: 1
[ 0.048180] smpboot: Total of 8 processors activated (54528.00 BogoMIPS)
[ 0.052355] devtmpfs: initialized
[ 0.052355] x86/mm: Memory block size: 128MB
[ 0.053004] evm: security.selinux
[ 0.053005] evm: security.SMACK64
[ 0.053005] evm: security.SMACK64EXEC
[ 0.053005] evm: security.SMACK64TRANSMUTE
[ 0.053006] evm: security.SMACK64MMAP
[ 0.053006] evm: security.apparmor
[ 0.053006] evm: security.ima
[ 0.053007] evm: security.capability
[ 0.053015] PM: Registering ACPI NVS region [mem 0xb9e5b000-0xb9e5bfff] (4096 bytes)
[ 0.053015] PM: Registering ACPI NVS region [mem 0xbed79000-0xbf672fff] (9412608 bytes)
[ 0.053015] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.053015] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.053015] pinctrl core: initialized pinctrl subsystem
[ 0.053015] RTC time: 3:29:36, date: 07/31/19
[ 0.053015] NET: Registered protocol family 16
[ 0.053015] audit: initializing netlink subsys (disabled)
[ 0.053015] audit: type=2000 audit(1564543776.052:1): state=initialized audit_enabled=0 res=1
[ 0.053015] cpuidle: using governor ladder
[ 0.053015] cpuidle: using governor menu
[ 0.053015] ACPI: bus type PCI registered
[ 0.053015] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.053015] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.053015] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.053015] PCI: Using configuration type 1 for base access
[ 0.053015] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.053015] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.053015] ACPI: Added _OSI(Module Device)
[ 0.053015] ACPI: Added _OSI(Processor Device)
[ 0.053015] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.053015] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.053015] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.053015] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.053015] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.056341] ACPI: Executed 23 blocks of module-level executable AML code
[ 0.072231] ACPI: Dynamic OEM Table Load:
[ 0.072237] ACPI: SSDT 0xFFFF91F165B03800 0006E4 (v02 PmRef Cpu0Ist 00003000 INTL 20120913)
[ 0.072529] ACPI: _PR_.CPU0: _OSC native thermal LVT Acked
[ 0.076970] ACPI: Dynamic OEM Table Load:
[ 0.076974] ACPI: SSDT 0xFFFF91F16572EC00 00037F (v02 PmRef Cpu0Cst 00003001 INTL 20120913)
[ 0.077305] ACPI: Dynamic OEM Table Load:
[ 0.077308] ACPI: SSDT 0xFFFF91F165B796C0 00008E (v02 PmRef Cpu0Hwp 00003000 INTL 20120913)
[ 0.077558] ACPI: Dynamic OEM Table Load:
[ 0.077561] ACPI: SSDT 0xFFFF91F16571B600 000130 (v02 PmRef HwpLvt 00003000 INTL 20120913)
[ 0.078522] ACPI: Dynamic OEM Table Load:
[ 0.078526] ACPI: SSDT 0xFFFF91F165B82000 0005AA (v02 PmRef ApIst 00003000 INTL 20120913)
[ 0.079107] ACPI: Dynamic OEM Table Load:
[ 0.079110] ACPI: SSDT 0xFFFF91F165719A00 000119 (v02 PmRef ApHwp 00003000 INTL 20120913)
[ 0.079440] ACPI: Dynamic OEM Table Load:
[ 0.079443] ACPI: SSDT 0xFFFF91F165718C00 000119 (v02 PmRef ApCst 00003000 INTL 20120913)
[ 0.085950] ACPI: Interpreter enabled
[ 0.085981] ACPI: (supports S0 S3 S4 S5)
[ 0.085982] ACPI: Using IOAPIC for interrupt routing
[ 0.086011] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.087203] ACPI: Enabled 10 GPEs in block 00 to 7F
[ 0.089541] ACPI: Power Resource [PG00] (on)
[ 0.089937] ACPI: Power Resource [PG01] (on)
[ 0.090293] ACPI: Power Resource [PG02] (on)
[ 0.094377] ACPI: Power Resource [WRST] (off)
[ 0.094707] ACPI: Power Resource [WRST] (off)
[ 0.095033] ACPI: Power Resource [WRST] (off)
[ 0.095357] ACPI: Power Resource [WRST] (off)
[ 0.095685] ACPI: Power Resource [WRST] (off)
[ 0.096011] ACPI: Power Resource [WRST] (off)
[ 0.096337] ACPI: Power Resource [WRST] (off)
[ 0.096660] ACPI: Power Resource [WRST] (off)
[ 0.096984] ACPI: Power Resource [WRST] (off)
[ 0.097310] ACPI: Power Resource [WRST] (off)
[ 0.097634] ACPI: Power Resource [WRST] (off)
[ 0.097961] ACPI: Power Resource [WRST] (off)
[ 0.098288] ACPI: Power Resource [WRST] (off)
[ 0.098612] ACPI: Power Resource [WRST] (off)
[ 0.098937] ACPI: Power Resource [WRST] (off)
[ 0.099261] ACPI: Power Resource [WRST] (off)
[ 0.099585] ACPI: Power Resource [WRST] (off)
[ 0.099909] ACPI: Power Resource [WRST] (off)
[ 0.100235] ACPI: Power Resource [WRST] (off)
[ 0.100559] ACPI: Power Resource [WRST] (off)
[ 0.114196] ACPI: Power Resource [FN00] (off)
[ 0.114282] ACPI: Power Resource [FN01] (off)
[ 0.114365] ACPI: Power Resource [FN02] (off)
[ 0.114452] ACPI: Power Resource [FN03] (off)
[ 0.114536] ACPI: Power Resource [FN04] (off)
[ 0.115987] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.115991] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.117757] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.118493] PCI host bridge to bus 0000:00
[ 0.118495] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.118496] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.118497] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.118498] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff window]
[ 0.118499] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[ 0.118500] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.118506] pci 0000:00:00.0: [8086:191f] type 00 class 0x060000
[ 0.118809] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
[ 0.118841] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.119079] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
[ 0.119098] pci 0000:00:14.0: reg 0x10: [mem 0xdf130000-0xdf13ffff 64bit]
[ 0.119158] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.119315] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
[ 0.119338] pci 0000:00:16.0: reg 0x10: [mem 0xdf14e000-0xdf14efff 64bit]
[ 0.119405] pci 0000:00:16.0: PME# supported from D3hot
[ 0.119540] pci 0000:00:16.3: [8086:a13d] type 00 class 0x070002
[ 0.119554] pci 0000:00:16.3: reg 0x10: [io 0xf060-0xf067]
[ 0.119561] pci 0000:00:16.3: reg 0x14: [mem 0xdf14d000-0xdf14dfff]
[ 0.119718] pci 0000:00:17.0: [8086:a102] type 00 class 0x010601
[ 0.119732] pci 0000:00:17.0: reg 0x10: [mem 0xdf148000-0xdf149fff]
[ 0.119738] pci 0000:00:17.0: reg 0x14: [mem 0xdf14c000-0xdf14c0ff]
[ 0.119744] pci 0000:00:17.0: reg 0x18: [io 0xf050-0xf057]
[ 0.119750] pci 0000:00:17.0: reg 0x1c: [io 0xf040-0xf043]
[ 0.119756] pci 0000:00:17.0: reg 0x20: [io 0xf020-0xf03f]
[ 0.119762] pci 0000:00:17.0: reg 0x24: [mem 0xdf14b000-0xdf14b7ff]
[ 0.119794] pci 0000:00:17.0: PME# supported from D3hot
[ 0.119945] pci 0000:00:1f.0: [8086:a146] type 00 class 0x060100
[ 0.120174] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
[ 0.120187] pci 0000:00:1f.2: reg 0x10: [mem 0xdf144000-0xdf147fff]
[ 0.120364] pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300
[ 0.120388] pci 0000:00:1f.3: reg 0x10: [mem 0xdf140000-0xdf143fff 64bit]
[ 0.120417] pci 0000:00:1f.3: reg 0x20: [mem 0xdf120000-0xdf12ffff 64bit]
[ 0.120463] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[ 0.120629] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
[ 0.120689] pci 0000:00:1f.4: reg 0x10: [mem 0xdf14a000-0xdf14a0ff 64bit]
[ 0.120758] pci 0000:00:1f.4: reg 0x20: [io 0xf000-0xf01f]
[ 0.120963] pci 0000:00:1f.6: [8086:15b7] type 00 class 0x020000
[ 0.120982] pci 0000:00:1f.6: reg 0x10: [mem 0xdf100000-0xdf11ffff]
[ 0.121058] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[ 0.121223] pci 0000:01:00.0: [10de:1b06] type 00 class 0x030000
[ 0.121241] pci 0000:01:00.0: reg 0x10: [mem 0xde000000-0xdeffffff]
[ 0.121251] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.121260] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[ 0.121266] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.121273] pci 0000:01:00.0: reg 0x30: [mem 0xdf000000-0xdf07ffff pref]
[ 0.121367] pci 0000:01:00.1: [10de:10ef] type 00 class 0x040300
[ 0.121381] pci 0000:01:00.1: reg 0x10: [mem 0xdf080000-0xdf083fff]
[ 0.132046] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.132053] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.132071] pci 0000:00:01.0: bridge window [mem 0xde000000-0xdf0fffff]
[ 0.132074] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.134276] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.134353] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.134429] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.134505] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.134581] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.134656] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.134733] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.134809] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.135599] SCSI subsystem initialized
[ 0.135607] libata version 3.00 loaded.
[ 0.135607] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[ 0.135607] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.135607] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.135607] vgaarb: loaded
[ 0.135607] ACPI: bus type USB registered
[ 0.135607] usbcore: registered new interface driver usbfs
[ 0.135607] usbcore: registered new interface driver hub
[ 0.135607] usbcore: registered new device driver usb
[ 0.135607] EDAC MC: Ver: 3.0.0
[ 0.135607] PCI: Using ACPI for IRQ routing
[ 0.164087] PCI: pci_cache_line_size set to 64 bytes
[ 0.164122] e820: reserve RAM buffer [mem 0x0009c800-0x0009ffff]
[ 0.164122] e820: reserve RAM buffer [mem 0xb9e5b000-0xbbffffff]
[ 0.164123] e820: reserve RAM buffer [mem 0xbda92000-0xbfffffff]
[ 0.164124] e820: reserve RAM buffer [mem 0xbfaff000-0xbfffffff]
[ 0.164125] e820: reserve RAM buffer [mem 0x53e000000-0x53fffffff]
[ 0.164178] NetLabel: Initializing
[ 0.164179] NetLabel: domain hash size = 128
[ 0.164179] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.164190] NetLabel: unlabeled traffic allowed by default
[ 0.164412] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.164416] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[ 0.166466] clocksource: Switched to clocksource hpet
[ 0.170824] VFS: Disk quotas dquot_6.6.0
[ 0.170834] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.170898] AppArmor: AppArmor Filesystem Enabled
[ 0.170914] pnp: PnP ACPI init
[ 0.171158] system 00:00: [io 0x0a00-0x0a0f] has been reserved
[ 0.171160] system 00:00: [io 0x0a10-0x0a1f] has been reserved
[ 0.171161] system 00:00: [io 0x0a20-0x0a2f] has been reserved
[ 0.171164] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.171377] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.171738] pnp 00:02: [dma 0 disabled]
[ 0.171768] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.172069] system 00:03: [io 0x0680-0x069f] has been reserved
[ 0.172070] system 00:03: [io 0xffff] has been reserved
[ 0.172071] system 00:03: [io 0xffff] has been reserved
[ 0.172072] system 00:03: [io 0xffff] has been reserved
[ 0.172073] system 00:03: [io 0x1800-0x18fe] has been reserved
[ 0.172074] system 00:03: [io 0x164e-0x164f] has been reserved
[ 0.172077] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.172149] system 00:04: [io 0x0800-0x087f] has been reserved
[ 0.172152] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.172166] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.172193] system 00:06: [io 0x1854-0x1857] has been reserved
[ 0.172195] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.172393] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.172394] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.172395] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.172396] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.172397] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.172398] system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.172399] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.172400] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[ 0.172401] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.172403] system 00:07: [mem 0xdffc0000-0xdffdffff] has been reserved
[ 0.172405] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.172436] system 00:08: [mem 0xfd000000-0xfdabffff] has been reserved
[ 0.172437] system 00:08: [mem 0xfdad0000-0xfdadffff] has been reserved
[ 0.172438] system 00:08: [mem 0xfdb00000-0xfdffffff] has been reserved
[ 0.172439] system 00:08: [mem 0xfe000000-0xfe01ffff] could not be reserved
[ 0.172440] system 00:08: [mem 0xfe036000-0xfe03bfff] has been reserved
[ 0.172441] system 00:08: [mem 0xfe03d000-0xfe3fffff] has been reserved
[ 0.172442] system 00:08: [mem 0xfe410000-0xfe7fffff] has been reserved
[ 0.172445] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.172691] system 00:09: [io 0xff00-0xfffe] has been reserved
[ 0.172693] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.173756] system 00:0a: [mem 0xfdaf0000-0xfdafffff] has been reserved
[ 0.173757] system 00:0a: [mem 0xfdae0000-0xfdaeffff] has been reserved
[ 0.173758] system 00:0a: [mem 0xfdac0000-0xfdacffff] has been reserved
[ 0.173760] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.174654] pnp: PnP ACPI: found 11 devices
[ 0.182118] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.182127] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.182128] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.182130] pci 0000:00:01.0: bridge window [mem 0xde000000-0xdf0fffff]
[ 0.182132] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.182135] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.182136] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.182137] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.182138] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xdfffffff window]
[ 0.182139] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
[ 0.182140] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.182141] pci_bus 0000:01: resource 1 [mem 0xde000000-0xdf0fffff]
[ 0.182142] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.182268] NET: Registered protocol family 2
[ 0.182405] TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.182617] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.182690] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.182719] UDP hash table entries: 16384 (order: 7, 524288 bytes)
[ 0.182771] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
[ 0.182837] NET: Registered protocol family 1
[ 0.184135] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.184143] PCI: CLS 0 bytes, default 64
[ 0.184164] Unpacking initramfs...
[ 0.733530] Freeing initrd memory: 54040K
[ 0.733583] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.733586] software IO TLB [mem 0xb5e5b000-0xb9e5b000] (64MB) mapped at [ (ptrval)- (ptrval)]
[ 0.733868] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x311fd3cd494, max_idle_ns: 440795223879 ns
[ 0.734073] Scanning for low memory corruption every 60 seconds
[ 0.734631] Initialise system trusted keyrings
[ 0.734638] Key type blacklist registered
[ 0.734713] workingset: timestamp_bits=36 max_order=23 bucket_order=0
[ 0.735407] zbud: loaded
[ 0.735800] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.735944] fuse init (API version 7.26)
[ 0.738184] Key type asymmetric registered
[ 0.738185] Asymmetric key parser 'x509' registered
[ 0.738202] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 0.738253] io scheduler noop registered
[ 0.738253] io scheduler deadline registered
[ 0.738269] io scheduler cfq registered (default)
[ 0.738672] pcieport 0000:00:01.0: Signaling PME with IRQ 121
[ 0.738711] vesafb: mode is 640x480x32, linelength=2560, pages=0
[ 0.738711] vesafb: scrolling: redraw
[ 0.738713] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.738719] vesafb: framebuffer at 0xd1000000, mapped to 0x (ptrval), using 1216k, total 1216k
[ 0.738782] Console: switching to colour frame buffer device 80x30
[ 0.738787] fb0: VESA VGA frame buffer device
[ 0.738796] intel_idle: MWAIT substates: 0x142120
[ 0.738797] intel_idle: v0.4.1 model 0x5E
[ 0.739219] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.739306] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[ 0.739325] ACPI: Sleep Button [SLPB]
[ 0.739345] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.739362] ACPI: Power Button [PWRB]
[ 0.739382] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.739444] ACPI: Power Button [PWRF]
[ 0.797795] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 0.856274] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.856275] ACPI: Thermal Zone [TZ00] (28 C)
[ 0.856424] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.856425] ACPI: Thermal Zone [TZ01] (30 C)
[ 0.856587] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.877420] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.900433] 0000:00:16.3: ttyS4 at I/O 0xf060 (irq = 19, base_baud = 115200) is a 16550A
[ 0.900745] Linux agpgart interface v0.103
[ 0.927170] loop: module loaded
[ 0.927268] libphy: Fixed MDIO Bus: probed
[ 0.927269] tun: Universal TUN/TAP device driver, 1.6
[ 0.927326] PPP generic driver version 2.4.2
[ 0.927385] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.927386] ehci-pci: EHCI PCI platform driver
[ 0.927391] ehci-platform: EHCI generic platform driver
[ 0.927397] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.927398] ohci-pci: OHCI PCI platform driver
[ 0.927403] ohci-platform: OHCI generic platform driver
[ 0.927406] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.927541] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.927545] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 0.928640] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000109810
[ 0.928644] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.928768] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.928769] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.928770] usb usb1: Product: xHCI Host Controller
[ 0.928771] usb usb1: Manufacturer: Linux 4.15.0-55-generic xhci-hcd
[ 0.928772] usb usb1: SerialNumber: 0000:00:14.0
[ 0.928904] hub 1-0:1.0: USB hub found
[ 0.928928] hub 1-0:1.0: 16 ports detected
[ 0.930402] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.930404] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.930407] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 0.930437] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.930438] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.930439] usb usb2: Product: xHCI Host Controller
[ 0.930440] usb usb2: Manufacturer: Linux 4.15.0-55-generic xhci-hcd
[ 0.930441] usb usb2: SerialNumber: 0000:00:14.0
[ 0.930564] hub 2-0:1.0: USB hub found
[ 0.930585] hub 2-0:1.0: 10 ports detected
[ 0.931516] usb: port power management may be unreliable
[ 0.931673] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.931673] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.932439] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.932627] mousedev: PS/2 mouse device common for all mice
[ 0.933008] rtc_cmos 00:05: RTC can wake from S4
[ 0.933431] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.933510] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.933514] i2c /dev entries driver
[ 0.933543] device-mapper: uevent: version 1.0.3
[ 0.933643] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: [email protected]
[ 0.933645] intel_pstate: Intel P-state driver initializing
[ 0.934911] intel_pstate: HWP enabled
[ 0.935611] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.936719] intel_pmc_core: initialized
[ 0.936948] NET: Registered protocol family 10
[ 0.942195] Segment Routing with IPv6
[ 0.942205] NET: Registered protocol family 17
[ 0.942491] Key type dns_resolver registered
[ 0.943844] RAS: Correctable Errors collector initialized.
[ 0.943860] microcode: sig=0x506e3, pf=0x2, revision=0xcc
[ 0.944317] microcode: Microcode Update Driver: v2.2.
[ 0.944323] sched_clock: Marking stable (944313365, 0)->(925986193, 18327172)
[ 0.944750] registered taskstats version 1
[ 0.944755] Loading compiled-in X.509 certificates
[ 0.946586] Loaded X.509 cert 'Build time autogenerated kernel key: e7667cc27bc30ba13155414766d1ea2a3e33b877'
[ 0.946601] zswap: loaded using pool lzo/zbud
[ 0.950287] Key type big_key registered
[ 0.950301] Key type trusted registered
[ 0.951921] Key type encrypted registered
[ 0.951923] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.952384] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.958046] ima: Allocated hash algorithm: sha1
[ 1.012691] evm: HMAC attrs: 0x1
[ 1.013255] Magic number: 11:577:463
[ 1.013571] rtc_cmos 00:05: setting system clock to 2019-07-31 03:29:37 UTC (1564543777)
[ 1.013817] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.013818] EDD information not available.
[ 1.264092] usb 1-11: new low-speed USB device number 2 using xhci_hcd
[ 1.305499] Freeing unused kernel image memory: 2408K
[ 1.320102] Write protecting the kernel read-only data: 20480k
[ 1.321475] Freeing unused kernel image memory: 2008K
[ 1.321842] Freeing unused kernel image memory: 1860K
[ 1.327284] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.327284] x86/mm: Checking user space page tables
[ 1.332466] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.340720] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.340773] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.340780] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.419262] usb 1-11: New USB device found, idVendor=093a, idProduct=2510
[ 1.419263] usb 1-11: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.419264] usb 1-11: Product: USB Optical Mouse
[ 1.419265] usb 1-11: Manufacturer: PixArt
[ 1.428594] pps_core: LinuxPPS API ver. 1 registered
[ 1.428595] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it
[ 1.429350] PTP clock support registered
[ 1.429546] ahci 0000:00:17.0: version 3.0
[ 1.431872] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 1.431873] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.439956] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 1.439958] ahci 0000:00:17.0: flags: 64bit ncq sntf pm led clo only pio slum part ems deso sadm sds apst
[ 1.451568] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.454226] usbcore: registered new interface driver usbhid
[ 1.454227] usbhid: USB HID core driver
[ 1.455362] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.0/0003:093A:2510.0001/input/input4
[ 1.455507] hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:14.0-11/input0
[ 1.497623] scsi host0: ahci
[ 1.497994] scsi host1: ahci
[ 1.498239] scsi host2: ahci
[ 1.498684] scsi host3: ahci
[ 1.499047] scsi host4: ahci
[ 1.499358] scsi host5: ahci
[ 1.499390] ata1: SATA max UDMA/133 abar m2048@0xdf14b000 port 0xdf14b100 irq 123
[ 1.499394] ata2: SATA max UDMA/133 abar m2048@0xdf14b000 port 0xdf14b180 irq 123
[ 1.499395] ata3: SATA max UDMA/133 abar m2048@0xdf14b000 port 0xdf14b200 irq 123
[ 1.499396] ata4: SATA max UDMA/133 abar m2048@0xdf14b000 port 0xdf14b280 irq 123
[ 1.499397] ata5: SATA max UDMA/133 abar m2048@0xdf14b000 port 0xdf14b300 irq 123
[ 1.499399] ata6: SATA max UDMA/133 abar m2048@0xdf14b000 port 0xdf14b380 irq 123
[ 1.499797] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 1.576203] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
[ 1.642587] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 4c:cc:6a:c5:b7:64
[ 1.642588] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
[ 1.642649] e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF
[ 1.643498] e1000e 0000:00:1f.6 eno1: renamed from eth0
[ 1.760703] clocksource: Switched to clocksource tsc
[ 1.815145] ata5: SATA link down (SStatus 4 SControl 300)
[ 1.815160] ata6: SATA link down (SStatus 4 SControl 300)
[ 1.815173] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.815187] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.815201] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.815212] ata3: SATA link down (SStatus 4 SControl 300)
[ 1.815617] ata1.00: ATA-8: PLEXTOR PX-128M7VC, 1.05, max UDMA/133
[ 1.815618] ata1.00: 250069680 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 1.816196] ata1.00: configured for UDMA/133
[ 1.816498] scsi 0:0:0:0: Direct-Access ATA PLEXTOR PX-128M7 1.05 PQ: 0 ANSI: 5
[ 1.816991] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.817349] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[ 1.817420] sd 0:0:0:0: [sda] Write Protect is off
[ 1.817422] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.817539] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.820637] sda: sda1 sda2 < sda5 >
[ 1.821917] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.853260] ata2.00: ATA-10: ST4000DM004-2CV104, 0001, max UDMA/133
[ 1.853261] ata2.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.904206] ata2.00: configured for UDMA/133
[ 1.904441] scsi 1:0:0:0: Direct-Access ATA ST4000DM004-2CV1 0001 PQ: 0 ANSI: 5
[ 1.904885] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 1.905164] sd 1:0:0:0: [sdb] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
[ 1.905165] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 1.905204] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.905205] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.905346] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.992952] sdb: sdb1
[ 1.993240] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 2.272478] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 2.276576] random: fast init done
[ 2.458285] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 2.467276] lp: driver loaded but no devices found
[ 2.470213] ppdev: user-space parallel port driver
[ 2.596636] audit: type=1400 audit(1564543779.079:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=516 comm="apparmor_parser"
[ 2.597022] audit: type=1400 audit(1564543779.079:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=513 comm="apparmor_parser"
[ 2.597024] audit: type=1400 audit(1564543779.079:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=513 comm="apparmor_parser"
[ 2.598545] audit: type=1400 audit(1564543779.079:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=514 comm="apparmor_parser"
[ 2.599590] audit: type=1400 audit(1564543779.079:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=509 comm="apparmor_parser"
[ 2.599593] audit: type=1400 audit(1564543779.079:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=509 comm="apparmor_parser"
[ 2.599594] audit: type=1400 audit(1564543779.079:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=509 comm="apparmor_parser"
[ 2.599596] audit: type=1400 audit(1564543779.079:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=509 comm="apparmor_parser"
[ 2.600332] audit: type=1400 audit(1564543779.083:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=519 comm="apparmor_parser"
[ 2.661424] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[ 2.662749] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[ 2.662750] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 2.662750] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 2.662751] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 2.662751] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 2.662752] RAPL PMU: hw unit of domain psys 2^-14 Joules
[ 2.666427] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 2.694217] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 2.694219] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 2.705677] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC662 rev3: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 2.705679] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 2.705680] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 2.705681] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 2.705681] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 2.705682] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 2.705683] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 2.705684] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 2.714121] AVX2 version of gcm_enc/dec engaged.
[ 2.714122] AES CTR mode by8 optimization enabled
[ 2.716212] ipmi message handler version 39.2
[ 2.716469] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input5
[ 2.716520] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input6
[ 2.716563] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input7
[ 2.716605] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
[ 2.716644] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
[ 2.718432] ipmi device interface
[ 2.749244] intel_rapl: Found RAPL domain package
[ 2.749246] intel_rapl: Found RAPL domain core
[ 2.749247] intel_rapl: Found RAPL domain dram
[ 2.851313] nvidia: loading out-of-tree module taints kernel.
[ 2.851317] nvidia: module license 'NVIDIA' taints kernel.
[ 2.851318] Disabling lock debugging due to kernel taint
[ 2.855092] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[ 2.862490] nvidia-nvlink: Nvlink Core is being initialized, major device number 238
[ 2.862950] nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[ 2.962382] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 430.34 Wed Jun 26 12:19:48 CDT 2019
[ 2.977231] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 430.34 Wed Jun 26 12:15:10 CDT 2019
[ 2.979860] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[ 2.979862] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 0
[ 3.102703] Adding 999420k swap on /dev/sda5. Priority:-2 extents:1 across:999420k SSFS
[ 3.134477] random: crng init done
[ 3.134478] random: 7 urandom warning(s) missed due to ratelimiting
[ 3.355739] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[ 3.544247] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
[ 3.608733] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10
[ 3.608780] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
[ 3.608818] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
[ 3.608854] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
[ 6.270985] e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 6.271037] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
[ 2410.676648] usb 2-2: new SuperSpeed USB device number 2 using xhci_hcd
[ 2410.701315] usb 2-2: New USB device found, idVendor=1058, idProduct=25e1
[ 2410.701318] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2410.701319] usb 2-2: Product: My Passport 25E1
[ 2410.701321] usb 2-2: Manufacturer: Western Digital
[ 2410.701322] usb 2-2: SerialNumber: 57585331413538433138305A
[ 2410.710146] usb-storage 2-2:1.0: USB Mass Storage device detected
[ 2410.710338] scsi host6: usb-storage 2-2:1.0
[ 2410.710420] usbcore: registered new interface driver usb-storage
[ 2410.711728] usbcore: registered new interface driver uas
[ 2411.728830] scsi 6:0:0:0: Direct-Access WD My Passport 25E1 1021 PQ: 0 ANSI: 6
[ 2411.729026] scsi 6:0:0:1: Enclosure WD SES Device 1021 PQ: 0 ANSI: 6
[ 2411.729945] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 2411.730134] scsi 6:0:0:1: Attached scsi generic sg3 type 13
[ 2411.730740] sd 6:0:0:0: [sdc] Spinning up disk...
[ 2412.752407] .
[ 2415.216064] scsi 6:0:0:1: Wrong diagnostic page; asked for 1 got 8
[ 2415.216072] scsi 6:0:0:1: Failed to get diagnostic page 0x1
[ 2415.216074] scsi 6:0:0:1: Failed to bind enclosure -19
[ 2415.216115] ses 6:0:0:1: Attached Enclosure device
[ 2415.217093] ready
[ 2415.217592] sd 6:0:0:0: [sdc] 3906963456 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 2415.217822] sd 6:0:0:0: [sdc] Write Protect is off
[ 2415.217823] sd 6:0:0:0: [sdc] Mode Sense: 47 00 10 08
[ 2415.218055] sd 6:0:0:0: [sdc] No Caching mode page found
[ 2415.218058] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[ 2415.249062] sdc: sdc1
[ 2415.250017] sd 6:0:0:0: [sdc] Attached SCSI disk
[ 2620.724637] kauditd_printk_skb: 12 callbacks suppressed
[ 2620.724637] audit: type=1400 audit(1564546397.596:23): apparmor="DENIED" operation="open" profile="/usr/bin/evince-thumbnailer" name="/home/xwj/.local/share/fonts/" pid=5013 comm="evince-thumbnai" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[ 2620.724655] audit: type=1400 audit(1564546397.596:24): apparmor="DENIED" operation="open" profile="/usr/bin/evince-thumbnailer" name="/home/xwj/.local/share/fonts/" pid=5013 comm="evince-thumbnai" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[ 2620.724669] audit: type=1400 audit(1564546397.596:25): apparmor="DENIED" operation="open" profile="/usr/bin/evince-thumbnailer" name="/home/xwj/.local/share/fonts/" pid=5013 comm="evince-thumbnai" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[ 2620.724672] audit: type=1400 audit(1564546397.596:26): apparmor="DENIED" operation="open" profile="/usr/bin/evince-thumbnailer" name="/home/xwj/.local/share/fonts/" pid=5013 comm="evince-thumbnai" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[ 2620.872812] audit: type=1400 audit(1564546397.744:27): apparmor="DENIED" operation="open" profile="/usr/bin/evince-thumbnailer" name="/home/xwj/.local/share/fonts/" pid=5017 comm="evince-thumbnai" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[ 2620.872830] audit: type=1400 audit(1564546397.744:28): apparmor="DENIED" operation="open" profile="/usr/bin/evince-thumbnailer" name="/home/xwj/.local/share/fonts/" pid=5017 comm="evince-thumbnai" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[ 2620.872846] audit: type=1400 audit(1564546397.744:29): apparmor="DENIED" operation="open" profile="/usr/bin/evince-thumbnailer" name="/home/xwj/.local/share/fonts/" pid=5017 comm="evince-thumbnai" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[ 2620.872849] audit: type=1400 audit(1564546397.744:30): apparmor="DENIED" operation="open" profile="/usr/bin/evince-thumbnailer" name="/home/xwj/.local/share/fonts/" pid=5017 comm="evince-thumbnai" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[ 2620.996500] audit: type=1400 audit(1564546397.868:31): apparmor="DENIED" operation="open" profile="/usr/bin/evince-thumbnailer" name="/home/xwj/.local/share/fonts/" pid=5021 comm="evince-thumbnai" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[ 2620.996520] audit: type=1400 audit(1564546397.868:32): apparmor="DENIED" operation="open" profile="/usr/bin/evince-thumbnailer" name="/home/xwj/.local/share/fonts/" pid=5021 comm="evince-thumbnai" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[ 6731.798483] usb 2-8: new SuperSpeed USB device number 3 using xhci_hcd
[ 6731.819663] usb 2-8: New USB device found, idVendor=0781, idProduct=5591
[ 6731.819667] usb 2-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6731.819671] usb 2-8: Product: Ultra USB 3.0
[ 6731.819674] usb 2-8: Manufacturer: SanDisk
[ 6731.819678] usb 2-8: SerialNumber: 4C530001290608109415
[ 6731.820626] usb-storage 2-8:1.0: USB Mass Storage device detected
[ 6731.820935] scsi host7: usb-storage 2-8:1.0
[ 6732.831332] scsi 7:0:0:0: Direct-Access SanDisk Ultra USB 3.0 1.00 PQ: 0 ANSI: 6
[ 6732.831948] sd 7:0:0:0: Attached scsi generic sg4 type 0
[ 6732.832308] sd 7:0:0:0: [sdd] 60063744 512-byte logical blocks: (30.8 GB/28.6 GiB)
[ 6732.833109] sd 7:0:0:0: [sdd] Write Protect is off
[ 6732.833114] sd 7:0:0:0: [sdd] Mode Sense: 43 00 00 00
[ 6732.833524] sd 7:0:0:0: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 6732.840181] sdd: sdd1
[ 6732.841822] sd 7:0:0:0: [sdd] Attached SCSI removable disk
[10752.959129] usb 2-2: USB disconnect, device number 2
[10773.603018] xhci_hcd 0000:00:14.0: Cannot set link state.
[10773.603028] usb usb2-port8: cannot disable (err = -32)
[10773.603037] usb 2-8: USB disconnect, device number 3
[12559.911346] perf: interrupt took too long (2522 > 2500), lowering kernel.perf_event_max_sample_rate to 79250
[13744.984501] usb 2-8: new SuperSpeed USB device number 4 using xhci_hcd
[13745.009321] usb 2-8: New USB device found, idVendor=1058, idProduct=25e1
[13745.009326] usb 2-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[13745.009329] usb 2-8: Product: My Passport 25E1
[13745.009333] usb 2-8: Manufacturer: Western Digital
[13745.009336] usb 2-8: SerialNumber: 57585331413538433138305A
[13745.010200] usb-storage 2-8:1.0: USB Mass Storage device detected
[13745.010434] scsi host6: usb-storage 2-8:1.0
[13746.029025] scsi 6:0:0:0: Direct-Access WD My Passport 25E1 1021 PQ: 0 ANSI: 6
[13746.029328] scsi 6:0:0:1: Enclosure WD SES Device 1021 PQ: 0 ANSI: 6
[13746.030744] sd 6:0:0:0: Attached scsi generic sg2 type 0
[13746.031004] ses 6:0:0:1: Attached Enclosure device
[13746.031216] ses 6:0:0:1: Attached scsi generic sg3 type 13
[13750.154258] ses 6:0:0:1: Wrong diagnostic page; asked for 1 got 8
[13750.154263] ses 6:0:0:1: Failed to get diagnostic page 0x1
[13750.154264] ses 6:0:0:1: Failed to bind enclosure -19
[13750.154456] sd 6:0:0:0: [sdc] 3906963456 512-byte logical blocks: (2.00 TB/1.82 TiB)
[13750.154688] sd 6:0:0:0: [sdc] Write Protect is off
[13750.154689] sd 6:0:0:0: [sdc] Mode Sense: 47 00 10 08
[13750.154930] sd 6:0:0:0: [sdc] No Caching mode page found
[13750.154932] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[13750.187381] sdc: sdc1
[13750.188288] sd 6:0:0:0: [sdc] Attached SCSI disk
[19535.351284] perf: interrupt took too long (3158 > 3152), lowering kernel.perf_event_max_sample_rate to 63250
[54395.812727] perf: interrupt took too long (3950 > 3947), lowering kernel.perf_event_max_sample_rate to 50500
[79698.800706] kauditd_printk_skb: 6 callbacks suppressed
[79698.800707] audit: type=1400 audit(1564623475.301:39): apparmor="DENIED" operation="capable" profile="/usr/bin/evince//sanitized_helper" pid=18648 comm="chrome" capability=21 capname="sys_admin"
[79699.065127] audit: type=1400 audit(1564623475.565:40): apparmor="DENIED" operation="file_mmap" profile="/usr/bin/evince//sanitized_helper" name="/home/xwj/.config/google-chrome/PepperFlash/32.0.0.223/libpepflashplayer.so" pid=18638 comm="chrome" requested_mask="m" denied_mask="m" fsuid=1000 ouid=1000
[79699.065398] audit: type=1400 audit(1564623475.565:41): apparmor="DENIED" operation="create" profile="/usr/bin/evince//sanitized_helper" pid=18638 comm="ThreadPoolForeg" family="netlink" sock_type="raw" protocol=0 requested_mask="create" denied_mask="create"
[79699.066622] audit: type=1400 audit(1564623475.569:42): apparmor="DENIED" operation="create" profile="/usr/bin/evince//sanitized_helper" pid=18638 comm="ThreadPoolForeg" family="netlink" sock_type="raw" protocol=15 requested_mask="create" denied_mask="create"
[79699.093037] audit: type=1400 audit(1564623475.593:43): apparmor="DENIED" operation="create" profile="/usr/bin/evince//sanitized_helper" pid=18680 comm="ThreadPoolForeg" family="netlink" sock_type="raw" protocol=0 requested_mask="create" denied_mask="create"
[79699.093328] audit: type=1400 audit(1564623475.593:44): apparmor="DENIED" operation="create" profile="/usr/bin/evince//sanitized_helper" pid=18680 comm="ThreadPoolForeg" family="netlink" sock_type="raw" protocol=0 requested_mask="create" denied_mask="create"
[79699.094673] audit: type=1400 audit(1564623475.597:45): apparmor="DENIED" operation="ptrace" profile="/usr/bin/evince//sanitized_helper" pid=18638 comm="chrome" requested_mask="trace" denied_mask="trace" peer="/usr/bin/evince//sanitized_helper"
[79699.122700] audit: type=1400 audit(1564623475.625:46): apparmor="DENIED" operation="ptrace" profile="/usr/bin/evince//sanitized_helper" pid=18638 comm="Chrome_IOThread" requested_mask="trace" denied_mask="trace" peer="/usr/bin/evince//sanitized_helper"
[79699.129105] audit: type=1400 audit(1564623475.629:47): apparmor="DENIED" operation="ptrace" profile="/usr/bin/evince//sanitized_helper" pid=18638 comm="ThreadPoolSingl" requested_mask="trace" denied_mask="trace" peer="/usr/bin/evince//sanitized_helper"
[79699.131675] audit: type=1400 audit(1564623475.633:48): apparmor="DENIED" operation="ptrace" profile="/usr/bin/evince//sanitized_helper" pid=18638 comm="ThreadPoolSingl" requested_mask="trace" denied_mask="trace" peer="/usr/bin/evince//sanitized_helper"
[82063.924809] audit: type=1400 audit(1564625840.421:49): apparmor="DENIED" operation="open" profile="/usr/bin/evince-thumbnailer" name="/home/xwj/.local/share/fonts/" pid=19867 comm="evince-thumbnai" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[82063.924824] audit: type=1400 audit(1564625840.421:50): apparmor="DENIED" operation="open" profile="/usr/bin/evince-thumbnailer" name="/home/xwj/.local/share/fonts/" pid=19867 comm="evince-thumbnai" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[82063.924844] audit: type=1400 audit(1564625840.421:51): apparmor="DENIED" operation="open" profile="/usr/bin/evince-thumbnailer" name="/home/xwj/.local/share/fonts/" pid=19867 comm="evince-thumbnai" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[82063.924848] audit: type=1400 audit(1564625840.421:52): apparmor="DENIED" operation="open" profile="/usr/bin/evince-thumbnailer" name="/home/xwj/.local/share/fonts/" pid=19867 comm="evince-thumbnai" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[82069.128840] audit: type=1400 audit(1564625845.625:53): apparmor="DENIED" operation="open" profile="/usr/bin/evince-thumbnailer" name="/home/xwj/.local/share/fonts/" pid=19888 comm="evince-thumbnai" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[82069.128864] audit: type=1400 audit(1564625845.625:54): apparmor="DENIED" operation="open" profile="/usr/bin/evince-thumbnailer" name="/home/xwj/.local/share/fonts/" pid=19888 comm="evince-thumbnai" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[82069.128885] audit: type=1400 audit(1564625845.625:55): apparmor="DENIED" operation="open" profile="/usr/bin/evince-thumbnailer" name="/home/xwj/.local/share/fonts/" pid=19888 comm="evince-thumbnai" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[82069.128890] audit: type=1400 audit(1564625845.625:56): apparmor="DENIED" operation="open" profile="/usr/bin/evince-thumbnailer" name="/home/xwj/.local/share/fonts/" pid=19888 comm="evince-thumbnai" requested_mask="r" denied_mask="r" fsuid=1000 ouid=1000
[90909.028696] perf: interrupt took too long (4942 > 4937), lowering kernel.perf_event_max_sample_rate to 40250
[97345.350157] aufs 4.15-20180219
[97346.144132] audit: type=1400 audit(1564641122.632:57): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=27040 comm="apparmor_parser"
[97346.201164] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[97346.202307] Bridge firewalling registered
[97346.209996] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[97346.229929] ip_tables: (C) 2000-2006 Netfilter Core Team
[97346.590142] Initializing XFRM netlink socket
[97346.602887] Netfilter messages via NETLINK v0.30.
[97346.607596] ctnetlink v0.93: registering with nfnetlink.
[97346.823661] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
[98317.401065] docker0: port 1(veth480d56f) entered blocking state
[98317.401072] docker0: port 1(veth480d56f) entered disabled state
[98317.401235] device veth480d56f entered promiscuous mode
[98317.401471] IPv6: ADDRCONF(NETDEV_UP): veth480d56f: link is not ready
[98317.401477] docker0: port 1(veth480d56f) entered blocking state
[98317.401485] docker0: port 1(veth480d56f) entered forwarding state
[98317.402786] docker0: port 1(veth480d56f) entered disabled state
[98317.753244] eth0: renamed from veth3fd53d1
[98317.777109] IPv6: ADDRCONF(NETDEV_CHANGE): veth480d56f: link becomes ready
[98317.777215] docker0: port 1(veth480d56f) entered blocking state
[98317.777219] docker0: port 1(veth480d56f) entered forwarding state
[98317.777349] IPv6: ADDRCONF(NETDEV_CHANGE): docker0: link becomes ready
[98318.260036] docker0: port 1(veth480d56f) entered disabled state
[98318.260081] veth3fd53d1: renamed from eth0
[98318.320587] docker0: port 1(veth480d56f) entered disabled state
[98318.323624] device veth480d56f left promiscuous mode
[98318.323630] docker0: port 1(veth480d56f) entered disabled state
[99709.698981] docker0: port 1(vetha62a648) entered blocking state
[99709.698983] docker0: port 1(vetha62a648) entered disabled state
[99709.699042] device vetha62a648 entered promiscuous mode
[99709.699111] IPv6: ADDRCONF(NETDEV_UP): vetha62a648: link is not ready
[99709.913906] eth0: renamed from veth9f3a970
[99709.937852] IPv6: ADDRCONF(NETDEV_CHANGE): vetha62a648: link becomes ready
[99709.937901] docker0: port 1(vetha62a648) entered blocking state
[99709.937904] docker0: port 1(vetha62a648) entered forwarding state
[99710.387986] docker0: port 1(vetha62a648) entered disabled state
[99710.388025] veth9f3a970: renamed from eth0
[99710.447029] docker0: port 1(vetha62a648) entered disabled state
[99710.449128] device vetha62a648 left promiscuous mode
[99710.449132] docker0: port 1(vetha62a648) entered disabled state
[101431.966319] docker0: port 1(veth144fde3) entered blocking state
[101431.966325] docker0: port 1(veth144fde3) entered disabled state
[101431.966546] device veth144fde3 entered promiscuous mode
[101431.966983] IPv6: ADDRCONF(NETDEV_UP): veth144fde3: link is not ready
[101432.026363] docker0: port 1(veth144fde3) entered disabled state
[101432.033103] device veth144fde3 left promiscuous mode
[101432.033115] docker0: port 1(veth144fde3) entered disabled state
[101805.987660] docker0: port 1(veth84f19d3) entered blocking state
[101805.987667] docker0: port 1(veth84f19d3) entered disabled state
[101805.987841] device veth84f19d3 entered promiscuous mode
[101805.988100] IPv6: ADDRCONF(NETDEV_UP): veth84f19d3: link is not ready
[101806.040608] docker0: port 1(veth84f19d3) entered disabled state
[101806.044233] device veth84f19d3 left promiscuous mode
[101806.044243] docker0: port 1(veth84f19d3) entered disabled state
[102189.935396] docker0: port 1(vethc0f2bb2) entered blocking state
[102189.935402] docker0: port 1(vethc0f2bb2) entered disabled state
[102189.935571] device vethc0f2bb2 entered promiscuous mode
[102189.935801] IPv6: ADDRCONF(NETDEV_UP): vethc0f2bb2: link is not ready
[102189.983129] docker0: port 1(vethc0f2bb2) entered disabled state
[102189.984497] device vethc0f2bb2 left promiscuous mode
[102189.984500] docker0: port 1(vethc0f2bb2) entered disabled state
[102420.725218] docker0: port 1(vethf7a9356) entered blocking state
[102420.725223] docker0: port 1(vethf7a9356) entered disabled state
[102420.725369] device vethf7a9356 entered promiscuous mode
[102420.725802] IPv6: ADDRCONF(NETDEV_UP): vethf7a9356: link is not ready
[102420.787138] docker0: port 1(vethf7a9356) entered disabled state
[102420.793497] device vethf7a9356 left promiscuous mode
[102420.793510] docker0: port 1(vethf7a9356) entered disabled state
[102470.352857] docker0: port 1(veth3debff2) entered blocking state
[102470.352862] docker0: port 1(veth3debff2) entered disabled state
[102470.353023] device veth3debff2 entered promiscuous mode
[102470.353232] IPv6: ADDRCONF(NETDEV_UP): veth3debff2: link is not ready
[102470.397551] docker0: port 1(veth3debff2) entered disabled state
[102470.401418] device veth3debff2 left promiscuous mode
[102470.401426] docker0: port 1(veth3debff2) entered disabled state
[103501.397573] docker0: port 1(vethf700f85) entered blocking state
[103501.397577] docker0: port 1(vethf700f85) entered disabled state
[103501.397717] device vethf700f85 entered promiscuous mode
[103501.397936] IPv6: ADDRCONF(NETDEV_UP): vethf700f85: link is not ready
[103501.441347] docker0: port 1(vethf700f85) entered disabled state
[103501.442558] device vethf700f85 left promiscuous mode
[103501.442561] docker0: port 1(vethf700f85) entered disabled state
[104264.571586] docker0: port 1(veth8f8e100) entered blocking state
[104264.571594] docker0: port 1(veth8f8e100) entered disabled state
[104264.571790] device veth8f8e100 entered promiscuous mode
[104264.574052] IPv6: ADDRCONF(NETDEV_UP): veth8f8e100: link is not ready
[104264.619559] docker0: port 1(veth8f8e100) entered disabled state
[104264.620792] device veth8f8e100 left promiscuous mode
[104264.620795] docker0: port 1(veth8f8e100) entered disabled state
[104319.956360] docker0: port 1(veth91c095c) entered blocking state
[104319.956364] docker0: port 1(veth91c095c) entered disabled state
[104319.956489] device veth91c095c entered promiscuous mode
[104319.957024] IPv6: ADDRCONF(NETDEV_UP): veth91c095c: link is not ready
[104320.001132] docker0: port 1(veth91c095c) entered disabled state
[104320.002534] device veth91c095c left promiscuous mode
[104320.002537] docker0: port 1(veth91c095c) entered disabled state
[104521.102430] docker0: port 1(veth94b1168) entered blocking state
[104521.102436] docker0: port 1(veth94b1168) entered disabled state
[104521.102596] device veth94b1168 entered promiscuous mode
[104521.102797] IPv6: ADDRCONF(NETDEV_UP): veth94b1168: link is not ready
[104521.102803] docker0: port 1(veth94b1168) entered blocking state
[104521.102807] docker0: port 1(veth94b1168) entered forwarding state
[104521.103522] docker0: port 1(veth94b1168) entered disabled state
[104521.159315] docker0: port 1(veth94b1168) entered disabled state
[104521.166090] device veth94b1168 left promiscuous mode
[104521.166097] docker0: port 1(veth94b1168) entered disabled state
[104717.315488] docker0: port 1(vetha728347) entered blocking state
[104717.315493] docker0: port 1(vetha728347) entered disabled state
[104717.315680] device vetha728347 entered promiscuous mode
[104717.315886] IPv6: ADDRCONF(NETDEV_UP): vetha728347: link is not ready
[104717.366492] docker0: port 1(vetha728347) entered disabled state
[104717.370297] device vetha728347 left promiscuous mode
[104717.370306] docker0: port 1(vetha728347) entered disabled state
[104794.872251] docker0: port 1(veth1569e07) entered blocking state
[104794.872255] docker0: port 1(veth1569e07) entered disabled state
[104794.872377] device veth1569e07 entered promiscuous mode
[104794.872634] IPv6: ADDRCONF(NETDEV_UP): veth1569e07: link is not ready
[104795.128924] eth0: renamed from veth72fe7cd
[104795.160857] IPv6: ADDRCONF(NETDEV_CHANGE): veth1569e07: link becomes ready
[104795.160986] docker0: port 1(veth1569e07) entered blocking state
[104795.160991] docker0: port 1(veth1569e07) entered forwarding state
[104795.626196] docker0: port 1(veth1569e07) entered disabled state
[104795.626240] veth72fe7cd: renamed from eth0
[104795.679697] docker0: port 1(veth1569e07) entered disabled state
[104795.681825] device veth1569e07 left promiscuous mode
[104795.681830] docker0: port 1(veth1569e07) entered disabled state
[104841.818210] docker0: port 1(veth665d874) entered blocking state
[104841.818216] docker0: port 1(veth665d874) entered disabled state
[104841.818395] device veth665d874 entered promiscuous mode
[104841.818772] IPv6: ADDRCONF(NETDEV_UP): veth665d874: link is not ready
[104841.866069] docker0: port 1(veth665d874) entered disabled state
[104841.869790] device veth665d874 left promiscuous mode
[104841.869800] docker0: port 1(veth665d874) entered disabled state
[104888.410871] snd_hda_codec_hdmi hdaudioC1D0: HDMI: invalid ELD data byte 37
[104906.038438] docker0: port 1(vethf15a803) entered blocking state
[104906.038439] docker0: port 1(vethf15a803) entered disabled state
[104906.038481] device vethf15a803 entered promiscuous mode
[104906.038537] IPv6: ADDRCONF(NETDEV_UP): vethf15a803: link is not ready
[104906.038539] docker0: port 1(vethf15a803) entered blocking state
[104906.038540] docker0: port 1(vethf15a803) entered forwarding state
[104906.042410] docker0: port 1(vethf15a803) entered disabled state
[104906.080912] docker0: port 1(vethf15a803) entered disabled state
[104906.082101] device vethf15a803 left promiscuous mode
[104906.082105] docker0: port 1(vethf15a803) entered disabled state
[104972.004066] docker0: port 1(vethd813cd7) entered blocking state
[104972.004072] docker0: port 1(vethd813cd7) entered disabled state
[104972.004273] device vethd813cd7 entered promiscuous mode
[104972.004539] IPv6: ADDRCONF(NETDEV_UP): vethd813cd7: link is not ready
[104972.049549] docker0: port 1(vethd813cd7) entered disabled state
[104972.051134] device vethd813cd7 left promiscuous mode
[104972.051138] docker0: port 1(vethd813cd7) entered disabled state[ ] Driver information from
nvidia-smi -a
==============NVSMI LOG==============
Timestamp : Thu Aug 1 16:42:50 2019
Driver Version : 430.34
CUDA Version : 10.1
Attached GPUs : 1
GPU 00000000:01:00.0
Product Name : GeForce GTX 1080 Ti
Product Brand : GeForce
Display Mode : Enabled
Display Active : Enabled
Persistence Mode : Disabled
Accounting Mode : Disabled
Accounting Mode Buffer Size : 4000
Driver Model
Current : N/A
Pending : N/A
Serial Number : 0321317150114
GPU UUID : GPU-de7e8698-487b-d7ec-a77f-1aa89b7f31ef
Minor Number : 0
VBIOS Version : 86.02.39.00.01
MultiGPU Board : No
Board ID : 0x100
GPU Part Number : 900-1G611-0050-000
Inforom Version
Image Version : G001.0000.01.04
OEM Object : 1.1
ECC Object : N/A
Power Management Object : N/A
GPU Operation Mode
Current : N/A
Pending : N/A
GPU Virtualization Mode
Virtualization mode : None
IBMNPU
Relaxed Ordering Mode : N/A
PCI
Bus : 0x01
Device : 0x00
Domain : 0x0000
Device Id : 0x1B0610DE
Bus Id : 00000000:01:00.0
Sub System Id : 0x120F10DE
GPU Link Info
PCIe Generation
Max : 3
Current : 3
Link Width
Max : 16x
Current : 16x
Bridge Chip
Type : N/A
Firmware : N/A
Replays Since Reset : 0
Replay Number Rollovers : 0
Tx Throughput : 96000 KB/s
Rx Throughput : 449000 KB/s
Fan Speed : 32 %
Performance State : P0
Clocks Throttle Reasons
Idle : Active
Applications Clocks Setting : Not Active
SW Power Cap : Not Active
HW Slowdown : Not Active
HW Thermal Slowdown : Not Active
HW Power Brake Slowdown : Not Active
Sync Boost : Not Active
SW Thermal Slowdown : Not Active
Display Clock Setting : Not Active
FB Memory Usage
Total : 11177 MiB
Used : 151 MiB
Free : 11026 MiB
BAR1 Memory Usage
Total : 256 MiB
Used : 5 MiB
Free : 251 MiB
Compute Mode : Default
Utilization
Gpu : 3 %
Memory : 0 %
Encoder : 0 %
Decoder : 0 %
Encoder Stats
Active Sessions : 0
Average FPS : 0
Average Latency : 0
FBC Stats
Active Sessions : 0
Average FPS : 0
Average Latency : 0
Ecc Mode
Current : N/A
Pending : N/A
ECC Errors
Volatile
Single Bit
Device Memory : N/A
Register File : N/A
L1 Cache : N/A
L2 Cache : N/A
Texture Memory : N/A
Texture Shared : N/A
CBU : N/A
Total : N/A
Double Bit
Device Memory : N/A
Register File : N/A
L1 Cache : N/A
L2 Cache : N/A
Texture Memory : N/A
Texture Shared : N/A
CBU : N/A
Total : N/A
Aggregate
Single Bit
Device Memory : N/A
Register File : N/A
L1 Cache : N/A
L2 Cache : N/A
Texture Memory : N/A
Texture Shared : N/A
CBU : N/A
Total : N/A
Double Bit
Device Memory : N/A
Register File : N/A
L1 Cache : N/A
L2 Cache : N/A
Texture Memory : N/A
Texture Shared : N/A
CBU : N/A
Total : N/A
Retired Pages
Single Bit ECC : N/A
Double Bit ECC : N/A
Pending Page Blacklist : N/A
Temperature
GPU Current Temp : 59 C
GPU Shutdown Temp : 96 C
GPU Slowdown Temp : 93 C
GPU Max Operating Temp : N/A
Memory Current Temp : N/A
Memory Max Operating Temp : N/A
Power Readings
Power Management : Supported
Power Draw : 63.66 W
Power Limit : 250.00 W
Default Power Limit : 250.00 W
Enforced Power Limit : 250.00 W
Min Power Limit : 125.00 W
Max Power Limit : 300.00 W
Clocks
Graphics : 1480 MHz
SM : 1480 MHz
Memory : 5508 MHz
Video : 1252 MHz
Applications Clocks
Graphics : N/A
Memory : N/A
Default Applications Clocks
Graphics : N/A
Memory : N/A
Max Clocks
Graphics : 1911 MHz
SM : 1911 MHz
Memory : 5505 MHz
Video : 1620 MHz
Max Customer Boost Clocks
Graphics : N/A
Clock Policy
Auto Boost : N/A
Auto Boost Default : N/A
Processes
Process ID : 14718
Type : G
Name : /usr/lib/xorg/Xorg
Used GPU Memory : 149 MiB
[ ] Docker version from
docker version
Client: Docker Engine - Community
Version: 19.03.1
API version: 1.40
Go version: go1.12.5
Git commit: 74b1e89e8a
Built: Thu Jul 25 21:21:35 2019
OS/Arch: linux/amd64
Experimental: false[ ] NVIDIA packages version from
dpkg -l '*nvidia*'_or_rpm -qa '*nvidia*'
期望状态=未知(u)/安装(i)/删除(r)/清除(p)/保持(h)
| 状态=未安装(n)/已安装(i)/仅存配置(c)/仅解压缩(U)/配置失败(F)/不完全安装(H)/触发器等待(W)/触发器未决(T)
|/ 错误?=(无)/须重装(R) (状态，错误：大写=故障)
||/ 名称 版本 体系结构： 描述
+++-========================================-=========================-=========================-=====================================================================================
un nvidia-common <无> <无> (无可用描述)
un nvidia-libopencl1-dev <无> <无> (无可用描述)
un nvidia-prime <无> <无> (无可用描述)
[ ] NVIDIA container library version from
nvidia-container-cli -V
command not found: nvidia-container-cli[ ] NVIDIA container library logs (see troubleshooting)
[ ] Docker command, image and tag used
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
50d5b4f6d9ff nvidia/cuda:9.0-base "nvidia-smi" 7 minutes ago Created pedantic_cannon
1afa77ec638d nvidia/cuda:9.0-base "nvidia-smi" 8 minutes ago Created eager_mahavira
1197d432da4a nvidia/cuda:9.0-base "nvidia-smi" 9 minutes ago Created hardcore_nobel
49cbf6bed9f5 nvidia/cuda:9.0-base "nvidia-smi" 11 minutes ago Created recursing_moser
67dd0a5eefe1 nvidia/cuda:10.1-base "nvidia-smi" 15 minutes ago Created hungry_wing
fed1e2ab13f8 nvidia/cuda:10.1-base "nvidia-smi" 18 minutes ago Created nice_neumann
i have tried all of those images,but i got the same issue:
docker: Error response from daemon: could not select device driver "" with capabilities: [[gpu]].
ERRO[0000] error waiting for container: context canceled
what should i do ? thank you so much!!!
xwjBupt
All 12 comments
I had the same problem.
The instructions on this page solved the problem for me.
MaierOli2010
on 9 Aug 2019
@MaierOli2010 ok, i will try ,thanks!!
xwjBupt
on 10 Aug 2019
Hello!
If you didn't already make sure you've installed the nvidia-container-toolkit.
If this doesn't fix it for you, make sure you've restarted docker systemctl restart dockerd
RenaudWasTaken
on 12 Aug 2019
I have the same issue, the following solution works!
- uninstall all docker related apps.
- reinstall docker by following this link:
https://qiita.com/uni-3/items/c9480d7e177e29b1316c
loveunk
on 18 Jan 2020
The sentence from readme saying, 'Note that with the release of Docker 19.03, usage of nvidia-docker2 packages are deprecated since NVIDIA GPUs are now natively supported as devices in the Docker runtime.', is misleading me that I think it's ready to go after installing Docker 19.03, but actually will fail when following the commands from Usage section.
@RenaudWasTaken I think you should consider putting the sentence 'For first-time users of Docker 19.03 and GPUs, continue with the instructions for getting started below.' together in a paragraph with the deprecated note.
fengyuentau
on 21 Feb 2020
ya, just had to restart the docker daemon: sudo systemctl restart docker
whillas
on 6 Mar 2020
Hello,
I am having the same problem, dispite following the instructions on NVIDIA's docker page and the advice of @RenaudWasTaken from above. After installing the NVIDIA Container toolkit with
# Add the package repositories
distribution=$(. /etc/os-release;echo $ID$VERSION_ID)
curl -s -L https://nvidia.github.io/nvidia-docker/gpgkey | sudo apt-key add -
curl -s -L https://nvidia.github.io/nvidia-docker/$distribution/nvidia-docker.list | sudo tee /etc/apt/sources.list.d/nvidia-docker.list
sudo apt-get update && sudo apt-get install -y nvidia-container-toolkit
sudo systemctl restart docker
I tried to run
docker run --gpus all nvidia/cuda:10.0-base nvidia-smi
I get the same error message as xwjBupt above:
docker: Error response from daemon: could not select device driver "" with capabilities: [[gpu]].
ERRO[0001] error waiting for container: context canceled
I am using Ubuntu 16.04. I checked that I have got the drivers installed: When running nvidia-smi, I get
| NVIDIA-SMI 384.130 Driver Version: 384.130 |
|-------------------------------+----------------------+----------------------+
| GPU Name Persistence-M| Bus-Id Disp.A | Volatile Uncorr. ECC |
| Fan Temp Perf Pwr:Usage/Cap| Memory-Usage | GPU-Util Compute M. |
|===============================+======================+======================|
| 0 TITAN Xp Off | 00000000:02:00.0 Off | N/A |
| 23% 29C P8 9W / 250W | 1MiB / 12189MiB | 0% Default |
+-------------------------------+----------------------+----------------------+
| 1 TITAN Xp Off | 00000000:03:00.0 On | N/A |
| 23% 40C P5 21W / 250W | 552MiB / 12181MiB | 1% Default |
+-------------------------------+----------------------+----------------------+
+-----------------------------------------------------------------------------+
| Processes: GPU Memory |
| GPU PID Type Process name Usage |
|=============================================================================|
| 1 1841 G /usr/lib/xorg/Xorg 339MiB |
| 1 3929 G compiz 158MiB |
| 1 4333 G ...uest-channel-token=11773295769896974116 53MiB |
+-----------------------------------------------------------------------------+
Also, docker --version gives me Docker version 19.03.8, build afacb8b7f0.
Please just let me know if you need more information.
martin294
on 3 Apr 2020
I am having the same issue, with the same version of Docker and the 440.82 driver. If I use --gpus the container launch fails, but without --gpus it works fine.
billwhiteley
on 11 May 2020
I followed above blog on collabnix.com- which spelled out this installation - but it was missing this last line to restart docker - then it worked.
sh nvidia-container-runtime-script.sh
curl -s -L https://nvidia.github.io/nvidia-container-runtime/gpgkey | \
sudo apt-key add -
distribution=$(. /etc/os-release;echo $ID$VERSION_ID)
curl -s -L https://nvidia.github.io/nvidia-container-runtime/$distribution/nvidia-container-runtime.list | \
sudo tee /etc/apt/sources.list.d/nvidia-container-runtime.list
sudo apt-get update
sudo systemctl restart docker
johndpope
on 23 May 2020
Hello!
If you didn't already make sure you've installed the
nvidia-container-toolkit.
If this doesn't fix it for you, make sure you've restarted dockersystemctl restart dockerd
lfernandes
on 21 Jun 2020
Does anyone have a solution for RHEL? All the above are for Ubuntu only!
tashrifbillah
on 13 Jul 2020
From the NVIDIA CUDA/WSL 2 documentation:
Use the Docker installation script to install Docker for your choice of WSL 2 Linux distribution. Note that NVIDIA Container Toolkit does not yet support Docker Desktop WSL 2 backend.
strarsis
on 3 Oct 2020
Related issues
o1lo01ol1o
·
4Comments
opptimus
·
3Comments
agnis84
·
4Comments
DimanNe
·
3Comments
mythly
·
3Comments
Most helpful comment
Hello!
If you didn't already make sure you've installed the
nvidia-container-toolkit.If this doesn't fix it for you, make sure you've restarted docker
systemctl restart dockerd