Motioneyeos: ### Board Model I am using the following board/model: Raspberry PI 3 A+

[freeflocw]

Board Model I am using the following board/model: Raspberry PI 3 A+

I tried for the new Raspi 3A+ both version of Motioneyeos for PiA and Pi3+.
Non worked!
Any idea?

[RPiSpy]

I've just got a Pi 3 Model A+. Keen to get MotionEyeOS working but I suspect it will take the developers some time to get their hands on a new Pi and make the required updates. There is no reason it shouldn't work as the 3A+ is almost identical to the 3B+.

[freeflocw]

I can send a A+

[ccrisan]

I am working on updating the OS. The kernel and firmware for the RPi boards will also get updated. You'll be able to try the new OS image as soon as I release it. I personally don't own an 3A+ but I don't think that's going to be necessary, for now.

[KeithMacDonald]

Thanks, that's good news. :-)
I too have just got a Pi 3 Model A+, and am keen to get MotionEyeOS running on it.
I look forward to seeing the new release.

[iwbnwif]

Great news, I'm also keen to try this on a Pi 3 A+.

[freeflocw]

Optimal for ipcam, performance and size. What would be a good case for the 3A+ with camera housing like the original zero case?

[KeithMacDonald]

Pi 3a+ case with space for camera?
Try this: https://thepihut.com/products/adafruit-raspberry-pi-a-case

[freeflocw]

yes, thanks, i have seen it. but simple white or black.
there will be also a Org.Pi case coming december, but not for camera like 3b+
https://www.welectron.com/Offizielles-Raspberry-Pi-3-A-Gehaeuse-rot-weiss

[ccrisan]

Can you please try the latest nightly build on the 3A+?

[freeflocw]

Great, thank you very much. crisan. On my 3A+ it's working.,great job in total.

[ccrisan]

Good to know. Thank you @freeflocw for reporting back!

[joland]

@ccrisan So which version is need? I just download motioneyeos-raspberrypi3-20181209.img.xz
and installed it for the Raspberry pi model 3 A+. But that one did not boot.

[freeflocw]

I got on several 3A+ with this version 3 running

[joland]

@freeflocw i swapped SD with a Stretch install for the 3B+ and it loaded without a hitch. Booting with motioneyeos-raspberrypi3-20181209.img it get stuck right from the start. It only shows the color array screen. Are there any special installation settings i should be aware of?

[joland]

I mixed up version pi3-20181209 with pi3-dev20190118. The latter doesn't work with a pi 3 A+ but first does.

[ccrisan]

@joland I'll try to reproduce the problem myself and get back to you.

[ccrisan]

@joland dev20190128 works on 3A+ here. Can you please try and confirm that it works on your side as well?

[freeflocw]

dev20190128 works on my 3A+ too.