Monero-gui: Monero-gui refuses to build

[lulighttec]

Beating my head against the wall trying to get the gui to install on Ubuntu 20.04 for Arm7. Following these instructions: https://github.com/monero-project/monero-gui"
./build.sh" can't find 3 files that should be there.
-lwallet_merged
-lepee
-leasylogging (even though I installed the easylogging package separately to make sure it was there)
Read a few threads similar to mine, but no avail. Here's a paste of the log output: PrivateBin I tried installing the regular monero first, then the gui; regular monerod installs and runs ok. Guibuild still produced this error. Noticed there's also a monero directory inside monero-gui, so tried "make" in that directory first, then "./build.sh" in monero-gui, but still no joy.

[selsta]

We currently don’t officially support the GUI on ARM. It should still work, but I have never tried it.

You might have more success with the cmake build system, delete your build directory and do:

make release -j4

Alternatively the CLI offers ARM binaries.

[lulighttec]

make: Nothing to be done for 'release'.

[selsta]

Checkout #3090

[lulighttec]

Funny story: I found #3090 shortly after I posted my last comment. As long as the oom-reaper doesn't get me, I think it might build. Thanks for the direction!

[lulighttec]

well, it built, finally. It runs until I try to create a wallet, and then has a segmentation fault and quits. But it built with no errors. Yay?

[selsta]

Do you have a backtrace? Do you know how to start monero-wallet-gui with gdb and get a backtrace?

[lulighttec]

I don't... enlighten me?

[selsta]

start the GUI like this:

gdb ./monero-wallet-gui

run

Reproduce the crash

thread apply all bt

And then copy / paste the backtrace.

[lulighttec]

Thread 1 "monero-wallet-g" received signal SIGSEGV, Segmentation fault.
0xb6921dbe in _ULarm_step () from /usr/lib/arm-linux-gnueabihf/libunwind.so.8
(gdb) thread apply all bt

Thread 31 (Thread 0xadcae1e0 (LWP 1921)):

0 __libc_do_syscall () at ../sysdeps/unix/sysv/linux/arm/libc-do-syscall.S:46

1 0xb400c454 in futex_abstimed_wait_cancelable (private=, abstime=0xadcadb20, clockid=, expected=0, futex_word=0x49f74a8) at ../sysdeps/nptl/futex-internal.h:320

2 __pthread_cond_wait_common (abstime=0xadcadb20, clockid=, mutex=0x49f7468, cond=0x49f7480) at pthread_cond_wait.c:520

3 __pthread_cond_timedwait (cond=0x49f7480, mutex=0x49f7468, abstime=0xadcadb20) at pthread_cond_wait.c:656

4 0x0052659a in Monero::WalletImpl::refreshThreadFunc() ()

5 0xb6df1124 in () at /usr/lib/arm-linux-gnueabihf/libboost_thread.so.1.71.0

6 0xb40069be in start_thread (arg=0xbe2dd1b9) at pthread_create.c:477

7 0xb3dc84cc in () at ../sysdeps/unix/sysv/linux/arm/clone.S:73

Thread 30 (Thread 0x941ff1e0 (LWP 1920)):

0 __libc_do_syscall () at ../sysdeps/unix/sysv/linux/arm/libc-do-syscall.S:46

1 0xb400c16e in futex_wait_cancelable (private=0, expected=0, futex_word=0x44cc4bc) at ../sysdeps/nptl/futex-internal.h:183

2 __pthread_cond_wait_common (abstime=0x0, clockid=0, mutex=0x44cc478, cond=0x44cc490) at pthread_cond_wait.c:508

3 __pthread_cond_wait (cond=0x44cc490, mutex=0x44cc478) at pthread_cond_wait.c:638

--Type for more, q to quit, c to continue without paging--

4 0xb54524a2 in QWaitCondition::wait(QMutex*, QDeadlineTimer) () at /usr/lib/arm-linux-gnueabihf/libQt5Core.so.5

5 0xb54525ae in QWaitCondition::wait(QMutex*, unsigned long) () at /usr/lib/arm-linux-gnueabihf/libQt5Core.so.5

6 0xb60e6094 in () at /usr/lib/arm-linux-gnueabihf/libQt5Quick.so.5

Thread 29 (Thread 0x954b81e0 (LWP 1919)):

0 __libc_do_syscall () at ../sysdeps/unix/sysv/linux/arm/libc-do-syscall.S:46

1 0xb400c16e in futex_wait_cancelable (private=0, expected=0, futex_word=0x12973f8 ) at ../sysdeps/nptl/futex-internal.h:183

2 __pthread_cond_wait_common (abstime=0x0, clockid=0, mutex=0x12973b8 , cond=0x12973d0 ) at pthread_cond_wait.c:508

3 __pthread_cond_wait (cond=0x12973d0 , mutex=0x12973b8 ) at pthread_cond_wait.c:638

4 0x007548f0 in tools::threadpool::run(bool) ()

5 0xb6df1124 in () at /usr/lib/arm-linux-gnueabihf/libboost_thread.so.1.71.0

6 0xb40069be in start_thread (arg=0xbe2dd1b9) at pthread_create.c:477

7 0xb3dc84cc in () at ../sysdeps/unix/sysv/linux/arm/clone.S:73

Thread 28 (Thread 0x959b91e0 (LWP 1918)):
--Type for more, q to quit, c to continue without paging--c

0 __libc_do_syscall () at ../sysdeps/unix/sysv/linux/arm/libc-do-syscall.S:46

1 0xb400c16e in futex_wait_cancelable (private=0, expected=0, futex_word=0x12973f8 ) at ../sysdeps/nptl/futex-internal.h:183

2 __pthread_cond_wait_common (abstime=0x0, clockid=0, mutex=0x12973b8 , cond=0x12973d0 ) at pthread_cond_wait.c:508

3 __pthread_cond_wait (cond=0x12973d0 , mutex=0x12973b8 ) at pthread_cond_wait.c:638

4 0x007548f0 in tools::threadpool::run(bool) ()

5 0xb6df1124 in () at /usr/lib/arm-linux-gnueabihf/libboost_thread.so.1.71.0

6 0xb40069be in start_thread (arg=0xbe2dd1b9) at pthread_create.c:477

7 0xb3dc84cc in () at ../sysdeps/unix/sysv/linux/arm/clone.S:73

Thread 27 (Thread 0x95eba1e0 (LWP 1917)):

0 __libc_do_syscall () at ../sysdeps/unix/sysv/linux/arm/libc-do-syscall.S:46

1 0xb400c16e in futex_wait_cancelable (private=0, expected=0, futex_word=0x12973f8 ) at ../sysdeps/nptl/futex-internal.h:183

2 __pthread_cond_wait_common (abstime=0x0, clockid=0, mutex=0x12973b8 , cond=0x12973d0 ) at pthread_cond_wait.c:508

3 __pthread_cond_wait (cond=0x12973d0 , mutex=0x12973b8 ) at pthread_cond_wait.c:638

4 0x007548f0 in tools::threadpool::run(bool) ()

5 0xb6df1124 in () at /usr/lib/arm-linux-gnueabihf/libboost_thread.so.1.71.0

6 0xb40069be in start_thread (arg=0xbe2dd1b9) at pthread_create.c:477

7 0xb3dc84cc in () at ../sysdeps/unix/sysv/linux/arm/clone.S:73

Thread 26 (Thread 0x963bb1e0 (LWP 1916)):

0 __libc_do_syscall () at ../sysdeps/unix/sysv/linux/arm/libc-do-syscall.S:46

1 0xb400c16e in futex_wait_cancelable (private=0, expected=0, futex_word=0x12973f8 ) at ../sysdeps/nptl/futex-internal.h:183

2 __pthread_cond_wait_common (abstime=0x0, clockid=0, mutex=0x12973b8 , cond=0x12973d0 ) at pthread_cond_wait.c:508

3 __pthread_cond_wait (cond=0x12973d0 , mutex=0x12973b8 ) at pthread_cond_wait.c:638

4 0x007548f0 in tools::threadpool::run(bool) ()

5 0xb6df1124 in () at /usr/lib/arm-linux-gnueabihf/libboost_thread.so.1.71.0

6 0xb40069be in start_thread (arg=0xbe2dd1b9) at pthread_create.c:477

7 0xb3dc84cc in () at ../sysdeps/unix/sysv/linux/arm/clone.S:73

Thread 25 (Thread 0x968bc1e0 (LWP 1915)):

0 __libc_do_syscall () at ../sysdeps/unix/sysv/linux/arm/libc-do-syscall.S:46

1 0xb400c16e in futex_wait_cancelable (private=0, expected=0, futex_word=0x12973f8 ) at ../sysdeps/nptl/futex-internal.h:183

2 __pthread_cond_wait_common (abstime=0x0, clockid=0, mutex=0x12973b8 , cond=0x12973d0 ) at pthread_cond_wait.c:508

3 __pthread_cond_wait (cond=0x12973d0 , mutex=0x12973b8 ) at pthread_cond_wait.c:638

4 0x007548f0 in tools::threadpool::run(bool) ()

5 0xb6df1124 in () at /usr/lib/arm-linux-gnueabihf/libboost_thread.so.1.71.0

6 0xb40069be in start_thread (arg=0xbe2dd1b9) at pthread_create.c:477

7 0xb3dc84cc in () at ../sysdeps/unix/sysv/linux/arm/clone.S:73

Thread 24 (Thread 0x96dbd1e0 (LWP 1914)):

0 __libc_do_syscall () at ../sysdeps/unix/sysv/linux/arm/libc-do-syscall.S:46

1 0xb400c16e in futex_wait_cancelable (private=0, expected=0, futex_word=0x12973f8 ) at ../sysdeps/nptl/futex-internal.h:183

2 __pthread_cond_wait_common (abstime=0x0, clockid=0, mutex=0x12973b8 , cond=0x12973d0 ) at pthread_cond_wait.c:508

3 __pthread_cond_wait (cond=0x12973d0 , mutex=0x12973b8 ) at pthread_cond_wait.c:638

4 0x007548f0 in tools::threadpool::run(bool) ()

5 0xb6df1124 in () at /usr/lib/arm-linux-gnueabihf/libboost_thread.so.1.71.0

6 0xb40069be in start_thread (arg=0xbe2dd1b9) at pthread_create.c:477

7 0xb3dc84cc in () at ../sysdeps/unix/sysv/linux/arm/clone.S:73

Thread 23 (Thread 0x972be1e0 (LWP 1913)):

0 __libc_do_syscall () at ../sysdeps/unix/sysv/linux/arm/libc-do-syscall.S:46

1 0xb400c16e in futex_wait_cancelable (private=0, expected=0, futex_word=0x12973f8 ) at ../sysdeps/nptl/futex-internal.h:183

2 __pthread_cond_wait_common (abstime=0x0, clockid=0, mutex=0x12973b8 , cond=0x12973d0 ) at pthread_cond_wait.c:508

3 __pthread_cond_wait (cond=0x12973d0 , mutex=0x12973b8 ) at pthread_cond_wait.c:638

4 0x007548f0 in tools::threadpool::run(bool) ()

5 0xb6df1124 in () at /usr/lib/arm-linux-gnueabihf/libboost_thread.so.1.71.0

6 0xb40069be in start_thread (arg=0xbe2dd1b9) at pthread_create.c:477

7 0xb3dc84cc in () at ../sysdeps/unix/sysv/linux/arm/clone.S:73

Thread 22 (Thread 0xa36ff1e0 (LWP 1911)):

0 __libc_do_syscall () at ../sysdeps/unix/sysv/linux/arm/libc-do-syscall.S:46

1 0xb3dc1324 in __GI___poll (timeout=-1, nfds=1, fds=0xa2d03360) at ../sysdeps/unix/sysv/linux/poll.c:29

2 __GI___poll (fds=0xa2d03360, nfds=1, timeout=-1) at ../sysdeps/unix/sysv/linux/poll.c:26

3 0xb35c77a6 in () at /usr/lib/arm-linux-gnueabihf/libglib-2.0.so.0

Thread 21 (Thread 0xa40ff1e0 (LWP 1910)):

0 __libc_do_syscall () at ../sysdeps/unix/sysv/linux/arm/libc-do-syscall.S:46

1 0xb400c454 in futex_abstimed_wait_cancelable (private=, abstime=0xa40feb00, clockid=, expected=0, futex_word=0x2ceb490) at ../sysdeps/nptl/futex-internal.h:320

2 __pthread_cond_wait_common (abstime=0xa40feb00, clockid=, mutex=0x2ceb450, cond=0x2ceb468) at pthread_cond_wait.c:520

3 __pthread_cond_timedwait (cond=0x2ceb468, mutex=0x2ceb450, abstime=0xa40feb00) at pthread_cond_wait.c:656

4 0xb545244c in QWaitCondition::wait(QMutex*, QDeadlineTimer) () at /usr/lib/arm-linux-gnueabihf/libQt5Core.so.5

5 0xb5452572 in QWaitCondition::wait(QMutex*, unsigned long) () at /usr/lib/arm-linux-gnueabihf/libQt5Core.so.5

6 0xb545022c in () at /usr/lib/arm-linux-gnueabihf/libQt5Core.so.5

7 0xb544d840 in () at /usr/lib/arm-linux-gnueabihf/libQt5Core.so.5

8 0xb40069be in start_thread (arg=0xbe2dd1b9) at pthread_create.c:477

9 0xb3dc84cc in () at ../sysdeps/unix/sysv/linux/arm/clone.S:73

Thread 20 (Thread 0xa4aff1e0 (LWP 1909)):

0 __libc_do_syscall () at ../sysdeps/unix/sysv/linux/arm/libc-do-syscall.S:46

1 0xb3dc1324 in __GI___poll (timeout=-1, nfds=1, fds=0xa4102758) at ../sysdeps/unix/sysv/linux/poll.c:29

2 __GI___poll (fds=0xa4102758, nfds=1, timeout=-1) at ../sysdeps/unix/sysv/linux/poll.c:26

3 0xb35c77a6 in () at /usr/lib/arm-linux-gnueabihf/libglib-2.0.so.0

Thread 19 (Thread 0xa5a351e0 (LWP 1905)):

0 __libc_do_syscall () at ../sysdeps/unix/sysv/linux/arm/libc-do-syscall.S:46

1 0xb400e5f6 in futex_abstimed_wait_cancelable (private=0, abstime=0x0, clockid=0, expected=1, futex_word=0xb53c178c) at ../sysdeps/nptl/futex-internal.h:320

2 do_futex_wait (sem=sem@entry=0xb53c178c, abstime=0x0, clockid=0) at sem_waitcommon.c:117

3 0xb400e6e4 in __new_sem_wait_slow (sem=0xb53c178c, abstime=0x0, clockid=0) at sem_waitcommon.c:285

4 0xb41ed102 in gles_vertexp_bb_neon_transform_and_produce_clip_bits () at /usr/lib/arm-linux-gnueabihf/libGLESv2.so

Thread 18 (Thread 0xa62361e0 (LWP 1904)):

0 __libc_do_syscall () at ../sysdeps/unix/sysv/linux/arm/libc-do-syscall.S:46

1 0xb3dc1324 in __GI___poll (timeout=-1, nfds=4, fds=0xa6235ae8) at ../sysdeps/unix/sysv/linux/poll.c:29

2 __GI___poll (fds=0xa6235ae8, nfds=4, timeout=-1) at ../sysdeps/unix/sysv/linux/poll.c:26

3 0xb4466cca in () at /usr/lib/arm-linux-gnueabihf/libGLESv2.so

Thread 17 (Thread 0xa6a371e0 (LWP 1903)):

0 __libc_do_syscall () at ../sysdeps/unix/sysv/linux/arm/libc-do-syscall.S:46

1 0xb400e5f6 in futex_abstimed_wait_cancelable (private=0, abstime=0x0, clockid=0, expected=1, futex_word=0x15e0788) at ../sysdeps/nptl/futex-internal.h:320

2 do_futex_wait (sem=sem@entry=0x15e0788, abstime=0x0, clockid=0) at sem_waitcommon.c:117

3 0xb400e6e4 in __new_sem_wait_slow (sem=0x15e0788, abstime=0x0, clockid=0) at sem_waitcommon.c:285

4 0xb4466ada in () at /usr/lib/arm-linux-gnueabihf/libGLESv2.so

Thread 16 (Thread 0xa72381e0 (LWP 1902)):

0 __libc_do_syscall () at ../sysdeps/unix/sysv/linux/arm/libc-do-syscall.S:46

1 0xb400e5f6 in futex_abstimed_wait_cancelable (private=0, abstime=0x0, clockid=0, expected=1, futex_word=0x15e0728) at ../sysdeps/nptl/futex-internal.h:320

2 do_futex_wait (sem=sem@entry=0x15e0728, abstime=0x0, clockid=0) at sem_waitcommon.c:117

3 0xb400e6e4 in __new_sem_wait_slow (sem=0x15e0728, abstime=0x0, clockid=0) at sem_waitcommon.c:285

4 0xb4466ada in () at /usr/lib/arm-linux-gnueabihf/libGLESv2.so

Thread 15 (Thread 0xa7a391e0 (LWP 1901)):

0 __libc_do_syscall () at ../sysdeps/unix/sysv/linux/arm/libc-do-syscall.S:46

1 0xb400e5f6 in futex_abstimed_wait_cancelable (private=0, abstime=0x0, clockid=0, expected=1, futex_word=0x15e06c8) at ../sysdeps/nptl/futex-internal.h:320

2 do_futex_wait (sem=sem@entry=0x15e06c8, abstime=0x0, clockid=0) at sem_waitcommon.c:117

3 0xb400e6e4 in __new_sem_wait_slow (sem=0x15e06c8, abstime=0x0, clockid=0) at sem_waitcommon.c:285

4 0xb4466ada in () at /usr/lib/arm-linux-gnueabihf/libGLESv2.so

Thread 14 (Thread 0xa823a1e0 (LWP 1900)):

0 __libc_do_syscall () at ../sysdeps/unix/sysv/linux/arm/libc-do-syscall.S:46

1 0xb400e5f6 in futex_abstimed_wait_cancelable (private=0, abstime=0x0, clockid=0, expected=1, futex_word=0x15e0668) at ../sysdeps/nptl/futex-internal.h:320

2 do_futex_wait (sem=sem@entry=0x15e0668, abstime=0x0, clockid=0) at sem_waitcommon.c:117

3 0xb400e6e4 in __new_sem_wait_slow (sem=0x15e0668, abstime=0x0, clockid=0) at sem_waitcommon.c:285

4 0xb4466ada in () at /usr/lib/arm-linux-gnueabihf/libGLESv2.so

Thread 13 (Thread 0xa8a3b1e0 (LWP 1899)):

0 __libc_do_syscall () at ../sysdeps/unix/sysv/linux/arm/libc-do-syscall.S:46

1 0xb400e5f6 in futex_abstimed_wait_cancelable (private=0, abstime=0x0, clockid=0, expected=1, futex_word=0x15e0608) at ../sysdeps/nptl/futex-internal.h:320

2 do_futex_wait (sem=sem@entry=0x15e0608, abstime=0x0, clockid=0) at sem_waitcommon.c:117

3 0xb400e6e4 in __new_sem_wait_slow (sem=0x15e0608, abstime=0x0, clockid=0) at sem_waitcommon.c:285

4 0xb4466ada in () at /usr/lib/arm-linux-gnueabihf/libGLESv2.so

Thread 12 (Thread 0xa923c1e0 (LWP 1898)):

0 __libc_do_syscall () at ../sysdeps/unix/sysv/linux/arm/libc-do-syscall.S:46

1 0xb400e5f6 in futex_abstimed_wait_cancelable (private=0, abstime=0x0, clockid=0, expected=1, futex_word=0x15e05a8) at ../sysdeps/nptl/futex-internal.h:320

2 do_futex_wait (sem=sem@entry=0x15e05a8, abstime=0x0, clockid=0) at sem_waitcommon.c:117

3 0xb400e6e4 in __new_sem_wait_slow (sem=0x15e05a8, abstime=0x0, clockid=0) at sem_waitcommon.c:285

4 0xb4466ada in () at /usr/lib/arm-linux-gnueabihf/libGLESv2.so

Thread 11 (Thread 0xa9a3d1e0 (LWP 1897)):

0 __libc_do_syscall () at ../sysdeps/unix/sysv/linux/arm/libc-do-syscall.S:46

1 0xb400e5f6 in futex_abstimed_wait_cancelable (private=0, abstime=0x0, clockid=0, expected=1, futex_word=0x15e0548) at ../sysdeps/nptl/futex-internal.h:320

2 do_futex_wait (sem=sem@entry=0x15e0548, abstime=0x0, clockid=0) at sem_waitcommon.c:117

3 0xb400e6e4 in __new_sem_wait_slow (sem=0x15e0548, abstime=0x0, clockid=0) at sem_waitcommon.c:285

4 0xb4466ada in () at /usr/lib/arm-linux-gnueabihf/libGLESv2.so

Thread 10 (Thread 0xaa23e1e0 (LWP 1896)):

0 __libc_do_syscall () at ../sysdeps/unix/sysv/linux/arm/libc-do-syscall.S:46

1 0xb400e5f6 in futex_abstimed_wait_cancelable (private=0, abstime=0x0, clockid=0, expected=1, futex_word=0x15e04e8) at ../sysdeps/nptl/futex-internal.h:320

2 do_futex_wait (sem=sem@entry=0x15e04e8, abstime=0x0, clockid=0) at sem_waitcommon.c:117

3 0xb400e6e4 in __new_sem_wait_slow (sem=0x15e04e8, abstime=0x0, clockid=0) at sem_waitcommon.c:285

4 0xb4466ada in () at /usr/lib/arm-linux-gnueabihf/libGLESv2.so

Thread 9 (Thread 0xaaa3f1e0 (LWP 1895)):

0 __libc_do_syscall () at ../sysdeps/unix/sysv/linux/arm/libc-do-syscall.S:46

1 0xb400e5f6 in futex_abstimed_wait_cancelable (private=0, abstime=0x0, clockid=0, expected=1, futex_word=0x1642064) at ../sysdeps/nptl/futex-internal.h:320

2 do_futex_wait (sem=sem@entry=0x1642064, abstime=0x0, clockid=0) at sem_waitcommon.c:117

3 0xb400e6e4 in __new_sem_wait_slow (sem=0x1642064, abstime=0x0, clockid=0) at sem_waitcommon.c:285

4 0xb4496d30 in () at /usr/lib/arm-linux-gnueabihf/libGLESv2.so

Thread 8 (Thread 0xac8ff1e0 (LWP 1870)):

0 __libc_do_syscall () at ../sysdeps/unix/sysv/linux/arm/libc-do-syscall.S:46

1 0xb3dc1324 in __GI___poll (timeout=-1, nfds=1, fds=0xabf02d78) at ../sysdeps/unix/sysv/linux/poll.c:29

2 __GI___poll (fds=0xabf02d78, nfds=1, timeout=-1) at ../sysdeps/unix/sysv/linux/poll.c:26

3 0xb35c77a6 in () at /usr/lib/arm-linux-gnueabihf/libglib-2.0.so.0

Thread 7 (Thread 0xad2ff1e0 (LWP 1868)):

0 __libc_do_syscall () at ../sysdeps/unix/sysv/linux/arm/libc-do-syscall.S:46

1 0xb3dc1324 in __GI___poll (timeout=-1, nfds=5, fds=0xac90dd40) at ../sysdeps/unix/sysv/linux/poll.c:29

2 __GI___poll (fds=0xac90dd40, nfds=5, timeout=-1) at ../sysdeps/unix/sysv/linux/poll.c:26

3 0xb35c77a6 in () at /usr/lib/arm-linux-gnueabihf/libglib-2.0.so.0

Thread 5 (Thread 0xae6ff1e0 (LWP 1866)):

0 __libc_do_syscall () at ../sysdeps/unix/sysv/linux/arm/libc-do-syscall.S:46

1 0xb3dc1324 in __GI___poll (timeout=-1, nfds=2, fds=0xae706bf0) at ../sysdeps/unix/sysv/linux/poll.c:29

2 __GI___poll (fds=0xae706bf0, nfds=2, timeout=-1) at ../sysdeps/unix/sysv/linux/poll.c:26

3 0xb35c77a6 in () at /usr/lib/arm-linux-gnueabihf/libglib-2.0.so.0

Thread 4 (Thread 0xaf0ff1e0 (LWP 1865)):

0 __libc_do_syscall () at ../sysdeps/unix/sysv/linux/arm/libc-do-syscall.S:46

1 0xb3dc1324 in __GI___poll (timeout=-1, nfds=1, fds=0xae701658) at ../sysdeps/unix/sysv/linux/poll.c:29

2 __GI___poll (fds=0xae701658, nfds=1, timeout=-1) at ../sysdeps/unix/sysv/linux/poll.c:26

3 0xb35c77a6 in () at /usr/lib/arm-linux-gnueabihf/libglib-2.0.so.0

Thread 3 (Thread 0xafa4e1e0 (LWP 1864)):

0 __libc_do_syscall () at ../sysdeps/unix/sysv/linux/arm/libc-do-syscall.S:46

1 0xb3dc1324 in __GI___poll (timeout=-1, nfds=1, fds=0x13cefb8) at ../sysdeps/unix/sysv/linux/poll.c:29

2 __GI___poll (fds=0x13cefb8, nfds=1, timeout=-1) at ../sysdeps/unix/sysv/linux/poll.c:26

3 0xb35c77a6 in () at /usr/lib/arm-linux-gnueabihf/libglib-2.0.so.0

Thread 2 (Thread 0xb12061e0 (LWP 1863)):

0 __libc_do_syscall () at ../sysdeps/unix/sysv/linux/arm/libc-do-syscall.S:46

1 0xb3dc1324 in __GI___poll (timeout=-1, nfds=1, fds=0xb1205ae4) at ../sysdeps/unix/sysv/linux/poll.c:29

2 __GI___poll (fds=0xb1205ae4, nfds=1, timeout=-1) at ../sysdeps/unix/sysv/linux/poll.c:26

3 0xb38868fc in () at /usr/lib/arm-linux-gnueabihf/libxcb.so.1

Thread 1 (Thread 0xb1926d50 (LWP 1860)):

0 0xb6921dbe in _ULarm_step () at /usr/lib/arm-linux-gnueabihf/libunwind.so.8

1 0xb6920864 in unw_backtrace () at /usr/lib/arm-linux-gnueabihf/libunwind.so.8

2 0x008e3350 in el::base::debug::StackTrace::generateNew() ()

3 0x00758de6 in tools::log_stack_trace(char const*) ()

4 0x00486b1a in __cxa_throw ()

5 0x00483c2e in boost::asio::detail::do_throw_error(boost::system::error_code const&, char const*) ()

6 0x008d1c12 in epee::net_utils::direct_connect::operator()(std::__cxx11::basic_string, std::allocator > const&, std::__cxx11::basic_string, std::allocator > const&, boost::asio::basic_waitable_timer, boost::asio::executor>&) const ()

7 0x004ffcba in std::_Function_handler > (std::__cxx11::basic_string, std::allocator > const&, std::__cxx11::basic_string, std::allocator > const&, boost::asio::basic_waitable_timer, boost::asio::executor>&), epee::net_utils::direct_connect>::_M_invoke(std::_Any_data const&, std::__cxx11::basic_string, std::allocator > const&, std::__cxx11::basic_string, std::allocator > const&, boost::asio::basic_waitable_timer, boost::asio::executor>&) ()

8 0x004e91be in epee::net_utils::blocked_mode_client::try_connect(std::__cxx11::basic_string, std::allocator > const&, std::__cxx11::basic_string, std::allocator > const&, std::chrono::duration >) ()

9 0x004e983c in epee::net_utils::blocked_mode_client::connect(std::__cxx11::basic_string, std::allocator > const&, std::__cxx11::basic_string, std::allocator > const&, std::chrono::duration >) ()

10 0x004e9c04 in epee::net_utils::http::http_simple_client_template::connect(std::chrono::duration >) ()

11 0x004f819c in epee::net_utils::http::http_simple_client_template::invoke(boost::basic_string_ref >, boost::basic_string_ref >, std::__cxx11::basic_string, std::allocator > const&, std::chrono::duration >, epee::net_utils::http::http_response_info const**, std::__cxx11::list, std::allocator >, std::__cxx11::basic_string, std::allocator > >, std::allocator, std::allocator >, std::__cxx11::basic_string, std::allocator > > > > const&) ()

12 0x006f27f8 in bool epee::net_utils::invoke_http_json >, epee::json_rpc::response, epee::json_rpc::error>, epee::net_utils::http::abstract_http_client>(boost::basic_string_ref >, epee::json_rpc::request > const&, epee::json_rpc::response, epee::json_rpc::error>&, epee::net_utils::http::abstract_http_client&, std::chrono::duration >, boost::basic_string_ref >) ()

13 0x006f2df2 in bool epee::net_utils::invoke_http_json_rpc, epee::misc_utils::struct_init, epee::net_utils::http::abstract_http_client>(boost::basic_string_ref >, std::__cxx11::basic_string, std::allocator >, epee::misc_utils::struct_init const&, epee::misc_utils::struct_init&, epee::json_rpc::error&, epee::net_utils::http::abstract_http_client&, std::chrono::duration >, boost::basic_string_ref >, std::__cxx11::basic_string, std::allocator > const&) ()

14 0x006ee4d8 in tools::NodeRPCProxy::get_infoabi:cxx11 ()

15 0x006eed6c in tools::NodeRPCProxy::get_target_heightabi:cxx11 ()

16 0x0057cdfa in tools::wallet2::get_daemon_blockchain_target_height(std::__cxx11::basic_string, std::allocator >&) ()

17 0x0057d0dc in tools::wallet2::estimate_blockchain_height() ()

18 0x00600a56 in tools::wallet2::generate(std::__cxx11::basic_string, std::allocator > const&, epee::wipeable_string const&, epee::mlocked > const&, bool, bool, bool) ()

19 0x0051dab4 in Monero::WalletImpl::create(std::__cxx11::basic_string, std::allocator > const&, std::__cxx11::basic_string, std::allocator > const&, std::__cxx11::basic_string, std::allocator > const&) ()

20 0x0053dcce in Monero::WalletManagerImpl::createWallet(std::__cxx11::basic_string, std::allocator > const&, std::__cxx11::basic_string, std::allocator > const&, std::__cxx11::basic_string, std::allocator > const&, Monero::NetworkType, unsigned long long) ()

21 0x004b0c1e in WalletManager::createWallet(QString const&, QString const&, QString const&, NetworkType::Type, unsigned long long) ()

22 0x0050fd58 in WalletManager::qt_static_metacall(QObject, QMetaObject::Call, int, void*) ()

23 0x00510050 in WalletManager::qt_metacall(QMetaObject::Call, int, void**) ()

24 0xb5adc296 in () at /usr/lib/arm-linux-gnueabihf/libQt5Qml.so.5

(gdb)

[xiphon]

Seems there is some issue with libunwind on ARM. Please apply the following patch to monero/CMakeLists.txt and rebuild the GUI.

@@ -395,7 +395,7 @@ elseif(CMAKE_C_COMPILER_ID STREQUAL "GNU" AND NOT MINGW)
   set(DEFAULT_STACK_TRACE ON)
   set(STACK_TRACE_LIB "easylogging++") # for diag output only
   set(LIBUNWIND_LIBRARIES "")
-elseif (ARM AND STATIC)
+elseif (ARM)
   set(DEFAULT_STACK_TRACE OFF)
   set(LIBUNWIND_LIBRARIES "")
 else()

[lulighttec]

Change applied; it gets to the end of
Removing translations equal to source text in 'usr/src/monero-gui/build/translations/monero-core_zu.qm'...
Generated 0 translation(s) (0 finished and 0 unfinished)
Ignored 690 untranslated source text(s)
make: *** No rule to make target '../translations/monero-core_hr.qm', needed by 'qrc_translations.cpp;'. Stop.

[xiphon]

Could you run clean build (i.e. rm -rf build before make release -j4)?

[lulighttec]

I did run 'make clean' beforehand; this time I used 'rm -rf build' as you suggested.
'make release' only results in 'make: Nothing to be done for 'release'.' Only the ./build.sh works, though I'd love to limit it to 7 threads while we're on the topic, since I only have 8, and ./build.sh seems to want to use all 8.

[selsta]

What happens when you edit ARCH from x86-64 to armv7-a on line 32 in Makefile?

[lulighttec]

The Makefile in /usr/src/monero-gui? term "ARCH" is not in this Makefile; line 32 is:
QINSTALL_PROGRAM = /usr/lib/qt5/bin/qmake -install qinstall -exe

[selsta]

Not sure which file you are looking at, see here: https://github.com/monero-project/monero-gui/blob/master/Makefile#L32

[xiphon]

Please run the following commands:

mkdir -p build/release
cd build/release
cmake -D ARCH="armv7-a" -D CMAKE_BUILD_TYPE=Release ../..
make -j7

[lulighttec]

There was a configuration error I included near the top before I ran the 'cmake' command with added
-DMANUAL_SUBMODULES=1

PrivateBin

[xiphon]

= sign is missing

Edit:
was talking about

root@odroid:/usr/src/monero-gui/build/release# cmake -D ARCH"armv7-a" -D CMAKE_BUILD_TYPE=release ../..
Parse error in command line argument: -D
Should be: VAR:type=value
CMake Error: No cmake script provided.
CMake Error: Problem processing arguments. Aborting.

[selsta]

seems to have failed here

[  4%] Building C object monero/src/crypto/CMakeFiles/obj_cncrypto.dir/aesb.c.o
cc: error: unrecognized -march target: x86-64
cc: note: valid arguments are: armv4 armv4t armv5t armv5te armv5tej armv6 armv6j armv6k armv6z armv6kz armv6zk armv6t2 armv6-m armv6s-m armv7 armv7-a armv7ve armv7-r armv7-m armv7e-m armv8-a armv8.1-a armv8.2-a armv8.3-a armv8.4-a armv8.5-a armv8-m.base armv8-m.main armv8-r iwmmxt iwmmxt2 native
cc: error: missing argument to ‘-march=’
cc: error: unrecognized command line option ‘-maes’
make[2]: *** [monero/src/crypto/CMakeFiles/obj_cncrypto.dir/build.make:63: monero/src/crypto/CMakeFiles/obj_cncrypto.dir/aesb.c.o] Error 1
make[1]: *** [CMakeFiles/Makefile2:1884: monero/src/crypto/CMakeFiles/obj_cncrypto.dir/all] Error 2
make[1]: *** Waiting for unfinished jobs....

[lulighttec]

@xiphon - at the very very top, yes there was an = missing between ARCH and "armv7-a", but right after that error, I entered it correctly the second time :-) There was a different error about updating all submodules; that's what I was referring to.

@selsta - Yes, I noticed this too.. what do I do?

@both of you - Thank you in advance for taking the time to help me

[xiphon]

~Try to comment out another line (additionally to previous patch) in monero/CMakeLists.txt~

Edit: thought you are building it on MacOS. The previous patch should work just fine.

[lulighttec]

I just copied the errors near the top this time...

` make -j7 [ 2%] Built target qrcodegen [ 2%] Built target lmdb [ 2%] Built target genversiongui [ 5%] Built target libminiupnpc-static [ 7%] Automatic MOC and UIC for target gui_version [ 9%] Built target generate_translations_header [ 10%] Built target easylogging [ 10%] Built target genversion [ 10%] Building CXX object monero/src/device/CMakeFiles/obj_device.dir/device.cpp.o c++: error: unrecognized -march target: x86-64 c++: note: valid arguments are: armv4 armv4t armv5t armv5te armv5tej armv6 armv6j armv6k armv6z armv6kz armv6zk armv6t2 armv6-m armv6s-m armv7 armv7-a armv7ve armv7-r armv7-m armv7e-m armv8-a armv8.1-a armv8.2-a armv8.3-a armv8.4-a armv8.5-a armv8-m.base armv8-m.main armv8-r iwmmxt iwmmxt2 native c++: error: missing argument to ‘-march=’ c++: error: unrecognized command line option ‘-maes’ [ 11%] Building C object monero/src/crypto/CMakeFiles/obj_cncrypto.dir/aesb.c.o make[2]: *** [monero/src/device/CMakeFiles/obj_device.dir/build.make:63: monero/src/device/CMakeFiles/obj_device.dir/device.cpp.o] Error 1 make[1]: *** [CMakeFiles/Makefile2:4126: monero/src/device/CMakeFiles/obj_device.dir/all] Error 2 make[1]: *** Waiting for unfinished jobs.... [ 11%] Built target gui_version_autogen [ 11%] Building CXX object monero/src/blocks/CMakeFiles/blocks.dir/blocks.cpp.o [ 11%] Building C object monero/external/randomx/CMakeFiles/randomx.dir/src/jit_compiler_x86_static.S.o c++: error: unrecognized -march target: x86-64 c++: note: valid arguments are: armv4 armv4t armv5t armv5te armv5tej armv6 armv6j armv6k armv6z armv6kz armv6zk armv6t2 armv6-m armv6s-m armv7 armv7-a armv7ve armv7-r armv7-m armv7e-m armv8-a armv8.1-a armv8.2-a armv8.3-a armv8.4-a armv8.5-a armv8-m.base armv8-m.main armv8-r iwmmxt iwmmxt2 native c++: error: missing argument to ‘-march=’ cc: error: unrecognized -march target: x86-64 cc: note: valid arguments are: armv4 armv4t armv5t armv5te armv5tej armv6 armv6j armv6k armv6z armv6kz armv6zk armv6t2 armv6-m armv6s-m armv7 armv7-a armv7ve armv7-r armv7-m armv7e-m armv8-a armv8.1-a armv8.2-a armv8.3-a armv8.4-a armv8.5-a armv8-m.base armv8-m.main armv8-r iwmmxt iwmmxt2 native cc: error: missing argument to ‘-march=’ c++: error: unrecognized command line option ‘-maes’ make[2]: *** [monero/src/blocks/CMakeFiles/blocks.dir/build.make:75: monero/src/blocks/CMakeFiles/blocks.dir/blocks.cpp.o] Error 1 [ 11%] Building CXX object monero/src/ringct/CMakeFiles/obj_ringct_basic.dir/rctOps.cpp.o make[2]: *** Waiting for unfinished jobs.... cc: error: unrecognized command line option ‘-maes’ [ 11%] Building C object monero/src/crypto/CMakeFiles/obj_cncrypto.dir/blake256.c.o make[2]: *** [monero/src/crypto/CMakeFiles/obj_cncrypto.dir/build.make:63: monero/src/crypto/CMakeFiles/obj_cncrypto.dir/aesb.c.o] Error 1 make[2]: *** Waiting for unfinished jobs.... c++: error: unrecognized -march target: x86-64 c++: note: valid arguments are: armv4 armv4t armv5t armv5te armv5tej armv6 armv6j armv6k armv6z armv6kz armv6zk armv6t2 armv6-m armv6s-m armv7 armv7-a armv7ve armv7-r armv7-m armv7e-m armv8-a armv8.1-a armv8.2-a armv8.3-a armv8.4-a armv8.5-a armv8-m.base armv8-m.main armv8-r iwmmxt iwmmxt2 native [ 12%] Building C object monero/src/blocks/CMakeFiles/blocks.dir/generated_checkpoints.c.o c++: error: missing argument to ‘-march=’ c++: error: unrecognized command line option ‘-maes’ [ 14%] Building CXX object monero/src/ringct/CMakeFiles/obj_ringct.dir/rctSigs.cpp.o make[2]: *** [monero/src/ringct/CMakeFiles/obj_ringct_basic.dir/build.make:63: monero/src/ringct/CMakeFiles/obj_ringct_basic.dir/rctOps.cpp.o] Error 1 make[2]: *** Waiting for unfinished jobs.... cc: error: unrecognized -march target: x86-64 cc: note: valid arguments are: armv4 armv4t armv5t armv5te armv5tej armv6 armv6j armv6k armv6z armv6kz armv6zk armv6t2 armv6-m armv6s-m armv7 armv7-a armv7ve armv7-r armv7-m armv7e-m armv8-a armv8.1-a armv8.2-a armv8.3-a armv8.4-a armv8.5-a armv8-m.base armv8-m.main armv8-r iwmmxt iwmmxt2 native cc: error: missing argument to ‘-march=’ cc: error: unrecognized command line option ‘-maes’ make[2]: *** [monero/src/blocks/CMakeFiles/blocks.dir/build.make:88: monero/src/blocks/CMakeFiles/blocks.dir/generated_checkpoints.c.o] Error 1 cc: error: unrecognized -march target: x86-64 cc: note: valid arguments are: armv4 armv4t armv5t armv5te armv5tej armv6 armv6j armv6k armv6z armv6kz armv6zk armv6t2 armv6-m armv6s-m armv7 armv7-a armv7ve armv7-r armv7-m armv7e-m armv8-a armv8.1-a armv8.2-a armv8.3-a armv8.4-a armv8.5-a armv8-m.base armv8-m.main armv8-r iwmmxt iwmmxt2 native cc: error: missing argument to ‘-march=’ make[1]: *** [CMakeFiles/Makefile2:4064: monero/src/blocks/CMakeFiles/blocks.dir/all] Error 2 c++: error: unrecognized -march target: x86-64 c++: note: valid arguments are: armv4 armv4t armv5t armv5te armv5tej armv6 armv6j armv6k armv6z armv6kz armv6zk armv6t2 armv6-m armv6s-m armv7 armv7-a armv7ve armv7-r armv7-m armv7e-m armv8-a armv8.1-a armv8.2-a armv8.3-a armv8.4-a armv8.5-a armv8-m.base armv8-m.main armv8-r iwmmxt iwmmxt2 native c++: error: missing argument to ‘-march=’ cc: error: unrecognized command line option ‘-maes’ c++: error: unrecognized command line option ‘-maes’ make[2]: *** [monero/src/crypto/CMakeFiles/obj_cncrypto.dir/build.make:76: monero/src/crypto/CMakeFiles/obj_cncrypto.dir/blake256.c.o] Error 1 make[2]: *** [monero/src/ringct/CMakeFiles/obj_ringct.dir/build.make:63: monero/src/ringct/CMakeFiles/obj_ringct.dir/rctSigs.cpp.o] Error 1 make[1]: *** [CMakeFiles/Makefile2:1949: monero/src/ringct/CMakeFiles/obj_ringct.dir/all] Error 2 [ 14%] Building CXX object monero/src/ringct/CMakeFiles/obj_ringct_basic.dir/rctTypes.cpp.o [ 14%] Building C object monero/src/crypto/CMakeFiles/obj_cncrypto.dir/chacha.c.o cc: error: unrecognized -march target: x86-64 c++: error: unrecognized -march target: x86-64 c++: note: valid arguments are: armv4 armv4t armv5t armv5te armv5tej armv6 armv6j armv6k armv6z armv6kz armv6zk armv6t2 armv6-m armv6s-m armv7 armv7-a armv7ve armv7-r armv7-m armv7e-m armv8-a armv8.1-a armv8.2-a armv8.3-a armv8.4-a armv8.5-a armv8-m.base armv8-m.main armv8-r iwmmxt iwmmxt2 native cc: note: valid arguments are: armv4 armv4t armv5t armv5te armv5tej armv6 armv6j armv6k armv6z armv6kz armv6zk armv6t2 armv6-m armv6s-m armv7 armv7-a armv7ve armv7-r armv7-m armv7e-m armv8-a armv8.1-a armv8.2-a armv8.3-a armv8.4-a armv8.5-a armv8-m.base armv8-m.main armv8-r iwmmxt iwmmxt2 native c++: error: missing argument to ‘-march=’ cc: error: missing argument to ‘-march=’ c++: error: unrecognized command line option ‘-maes’ cc: error: unrecognized command line option ‘-maes’ make[2]: *** [monero/src/ringct/CMakeFiles/obj_ringct_basic.dir/build.make:76: monero/src/ringct/CMakeFiles/obj_ringct_basic.dir/rctTypes.cpp.o] Error 1 make[2]: *** [monero/src/crypto/CMakeFiles/obj_cncrypto.dir/build.make:89: monero/src/crypto/CMakeFiles/obj_cncrypto.dir/chacha.c.o] Error 1 make[1]: *** [CMakeFiles/Makefile2:2008: monero/src/ringct/CMakeFiles/obj_ringct_basic.dir/all] Error 2 make[1]: *** [CMakeFiles/Makefile2:1884: monero/src/crypto/CMakeFiles/obj_cncrypto.dir/all] Error 2 /usr/src/monero-gui/monero/external/randomx/src/jit_compiler_x86_static.S: Assembler messages: /usr/src/monero-gui/monero/external/randomx/src/jit_compiler_x86_static.S:27: Error: unknown pseudo-op: `.intel_syntax' /usr/src/monero-gui/monero/external/randomx/src/jit_compiler_x86_static.S:72: Error: ARM register expected -- `mov rdx,rax' /usr/src/monero-gui/monero/external/randomx/src/jit_compiler_x86_static.S:73: Error: ARM register expected -- `and eax,(2097152-64)' /usr/src/monero-gui/monero/external/randomx/src/jit_compiler_x86_static.S:74: Error: bad instruction `prefetcht0 [rsi+rax]' /usr/src/monero-gui/monero/external/randomx/src/jit_compiler_x86_static.S:75: Error: ARM register expected -- `ror rdx,32' /usr/src/monero-gui/monero/external/randomx/src/jit_compiler_x86_static.S:76: Error: ARM register expected -- `and edx,(2097152-64)'

[xiphon]

Sounds weird, could you try clean build again and post the entire output (with patched monero/CMakeLists.txt)?

[lulighttec]

sure, what was the second line number again? (so I can uncomment it)

nevermind, found it.

[xiphon]

Pleas apply https://github.com/monero-project/monero-gui/pull/3094 (before patching the monero/CMakeLists.txt) as well

[lulighttec]

Holy Errors on 'cmake -D ARCH="armv7-a" -D CMAKE_BUILD_TYPE=release ../..', Batman

/usr/src/monero-gui/build/release# cmake -D ARCH="armv7-a" -D CMAKE_CUILD_TYPE=release ../..
CMake Warning (dev) at CMakeLists.txt:46:
  Syntax Warning in cmake code at column 23

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:46:
  Syntax Warning in cmake code at column 42

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:52:
  Syntax Warning in cmake code at column 38

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:52:
  Syntax Warning in cmake code at column 128

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:53:
  Syntax Warning in cmake code at column 30

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:53:
  Syntax Warning in cmake code at column 85

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:62:
  Syntax Warning in cmake code at column 52

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:62:
  Syntax Warning in cmake code at column 58

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:63:
  Syntax Warning in cmake code at column 46

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:63:
  Syntax Warning in cmake code at column 52

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:64:
  Syntax Warning in cmake code at column 51

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:64:
  Syntax Warning in cmake code at column 57

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:65:
  Syntax Warning in cmake code at column 55

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:65:
  Syntax Warning in cmake code at column 61

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:66:
  Syntax Warning in cmake code at column 51

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:66:
  Syntax Warning in cmake code at column 57

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:68:
  Syntax Warning in cmake code at column 36

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:68:
  Syntax Warning in cmake code at column 41

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:73:
  Syntax Warning in cmake code at column 19

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:73:
  Syntax Warning in cmake code at column 42

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:76:
  Syntax Warning in cmake code at column 36

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:76:
  Syntax Warning in cmake code at column 38

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:82:
  Syntax Warning in cmake code at column 21

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:82:
  Syntax Warning in cmake code at column 63

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:91:
  Syntax Warning in cmake code at column 45

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:91:
  Syntax Warning in cmake code at column 48

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:91:
  Syntax Warning in cmake code at column 70

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:92:
  Syntax Warning in cmake code at column 17

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:92:
  Syntax Warning in cmake code at column 43

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:94:
  Syntax Warning in cmake code at column 16

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:94:
  Syntax Warning in cmake code at column 23

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:100:
  Syntax Warning in cmake code at column 16

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:100:
  Syntax Warning in cmake code at column 42

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:104:
  Syntax Warning in cmake code at column 24

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:104:
  Syntax Warning in cmake code at column 73

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:110:
  Syntax Warning in cmake code at column 44

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:110:
  Syntax Warning in cmake code at column 51

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:120:
  Syntax Warning in cmake code at column 17

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:120:
  Syntax Warning in cmake code at column 37

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:127:
  Syntax Warning in cmake code at column 17

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:127:
  Syntax Warning in cmake code at column 52

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:128:
  Syntax Warning in cmake code at column 17

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:128:
  Syntax Warning in cmake code at column 63

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:129:
  Syntax Warning in cmake code at column 17

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:129:
  Syntax Warning in cmake code at column 84

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:135:
  Syntax Warning in cmake code at column 21

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:135:
  Syntax Warning in cmake code at column 64

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:136:
  Syntax Warning in cmake code at column 21

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:136:
  Syntax Warning in cmake code at column 60

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:141:
  Syntax Warning in cmake code at column 17

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:141:
  Syntax Warning in cmake code at column 58

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:145:
  Syntax Warning in cmake code at column 17

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:145:
  Syntax Warning in cmake code at column 62

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:146:
  Syntax Warning in cmake code at column 17

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:146:
  Syntax Warning in cmake code at column 57

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:150:
  Syntax Warning in cmake code at column 17

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:150:
  Syntax Warning in cmake code at column 65

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:151:
  Syntax Warning in cmake code at column 17

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:151:
  Syntax Warning in cmake code at column 60

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:176:
  Syntax Warning in cmake code at column 21

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:176:
  Syntax Warning in cmake code at column 45

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:177:
  Syntax Warning in cmake code at column 21

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:177:
  Syntax Warning in cmake code at column 57

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:178:
  Syntax Warning in cmake code at column 21

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:178:
  Syntax Warning in cmake code at column 53

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:183:
  Syntax Warning in cmake code at column 25

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:183:
  Syntax Warning in cmake code at column 58

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:188:
  Syntax Warning in cmake code at column 25

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:188:
  Syntax Warning in cmake code at column 78

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:189:
  Syntax Warning in cmake code at column 21

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:189:
  Syntax Warning in cmake code at column 57

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:190:
  Syntax Warning in cmake code at column 29

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:190:
  Syntax Warning in cmake code at column 77

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:219:
  Syntax Warning in cmake code at column 21

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:219:
  Syntax Warning in cmake code at column 92

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:229:
  Syntax Warning in cmake code at column 28

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:229:
  Syntax Warning in cmake code at column 52

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:255:
  Syntax Warning in cmake code at column 23

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:255:
  Syntax Warning in cmake code at column 37

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:257:
  Syntax Warning in cmake code at column 25

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:257:
  Syntax Warning in cmake code at column 49

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:266:
  Syntax Warning in cmake code at column 21

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:266:
  Syntax Warning in cmake code at column 145

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:267:
  Syntax Warning in cmake code at column 21

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:267:
  Syntax Warning in cmake code at column 137

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:268:
  Syntax Warning in cmake code at column 21

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:268:
  Syntax Warning in cmake code at column 143

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:338:
  Syntax Warning in cmake code at column 35

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:338:
  Syntax Warning in cmake code at column 40

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:375:
  Syntax Warning in cmake code at column 17

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:375:
  Syntax Warning in cmake code at column 65

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:376:
  Syntax Warning in cmake code at column 17

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:376:
  Syntax Warning in cmake code at column 60

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:380:
  Syntax Warning in cmake code at column 30

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:380:
  Syntax Warning in cmake code at column 68

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:388:
  Syntax Warning in cmake code at column 24

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:388:
  Syntax Warning in cmake code at column 41

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:390:
  Syntax Warning in cmake code at column 24

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:396:
  Syntax Warning in cmake code at column 50

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:413:
  Syntax Warning in cmake code at column 24

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:413:
  Syntax Warning in cmake code at column 88

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:417:
  Syntax Warning in cmake code at column 26

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:417:
  Syntax Warning in cmake code at column 89

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:429:
  Syntax Warning in cmake code at column 67

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:429:
  Syntax Warning in cmake code at column 70

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:437:
  Syntax Warning in cmake code at column 67

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:437:
  Syntax Warning in cmake code at column 70

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:447:
  Syntax Warning in cmake code at column 40

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:447:
  Syntax Warning in cmake code at column 43

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:458:
  Syntax Warning in cmake code at column 64

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:458:
  Syntax Warning in cmake code at column 67

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:466:
  Syntax Warning in cmake code at column 26

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:466:
  Syntax Warning in cmake code at column 65

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:470:
  Syntax Warning in cmake code at column 26

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:470:
  Syntax Warning in cmake code at column 64

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:496:
  Syntax Warning in cmake code at column 17

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:496:
  Syntax Warning in cmake code at column 70

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:497:
  Syntax Warning in cmake code at column 17

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:497:
  Syntax Warning in cmake code at column 74

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:498:
  Syntax Warning in cmake code at column 17

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:498:
  Syntax Warning in cmake code at column 76

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:500:
  Syntax Warning in cmake code at column 20

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:500:
  Syntax Warning in cmake code at column 65

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:501:
  Syntax Warning in cmake code at column 22

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:501:
  Syntax Warning in cmake code at column 73

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:502:
  Syntax Warning in cmake code at column 29

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:502:
  Syntax Warning in cmake code at column 91

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Warning (dev) at CMakeLists.txt:507:
  Syntax Warning in cmake code at column 36

  Argument not separated from preceding token by whitespace.
This warning is for project developers.  Use -Wno-dev to suppress it.

CMake Error at CMakeLists.txt:523:
  Parse error.  Function missing ending ")".  Instead found unterminated
  string with text ")

      else()
        find_library(COREFOUNDATION CoreFoundation)
        find_library(IOKIT IOKit)
        list(APPEND EXTRA_LIBRARIES ${IOKIT})
        list(APPEND EXTRA_LIBRARIES ${COREFOUNDATION})
      endif()
    endif()
    if (WIN32)
      list(APPEND EXTRA_LIBRARIES setupapi Version)
    endif()

  endif()



  add_subdirectory(translations)



  add_subdirectory(src)

  ".


-- Configuring incomplete, errors occurred!
See also "/usr/src/monero-gui/CMakeFiles/CMakeOutput.log".
See also "/usr/src/monero-gui/CMakeFiles/CMakeError.log".

[lulighttec]

I looked for this whitespace, but couldn't find it; looked for other things like hanging ) but couldn't find any of those either.

```set(BUILD_GUI_DEPS ON)
set(ARCH "x86-64")
set(BUILD_64 ON)

if(NOT MANUAL_SUBMODULES)
find_package(Git)
if(GIT_FOUND)
if(NOT DEV_MODE)
function (check_submodule relative_path)
execute_process(COMMAND git rev-parse "HEAD" WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}/${relative_path} OUTPUT_VARIABLE localHead)
execute_process(COMMAND git rev-parse "HEAD:${relative_path}" WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR} OUTPUT_VARIABLE checkedHead)
string(COMPARE EQUAL "${localHead}" "${checkedHead}" upToDate)
if (upToDate)
message(STATUS "Submodule '${relative_path}' is up-to-date")
else()
message(FATAL_ERROR "Submodule '${relative_path}' is not using the checked head. Please update all submodules with\ngit submodule update --init --force --recursive>
endif()
endfunction ()
message(STATUS "Checking submodules")
check_submodule(monero)
else()
execute_process(COMMAND ${GIT_EXECUTABLE} fetch WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}/monero RESULT_VARIABLE GIT_FETCH_RESULT)
execute_process(COMMAND ${GIT_EXECUTABLE} checkout -f origin/master WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}/monero RESULT_VARIABLE GIT_CHECKOUT_MASTER_RESULT)
execute_process(COMMAND ${GIT_EXECUTABLE} submodule update --init --force --recursive WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}/monero RESULT_VARIABLE GIT_SUBMODULE>
if(NOT GIT_FETCH_RESULT EQUAL "0" OR NOT GIT_CHECKOUT_MASTER_RESULT EQUAL "0" OR NOT GIT_SUBMODULE_UPDATE_RESULT EQUAL "0")
message(FATAL_ERROR "Updating git submodule to master (-DDEV_MODE=ON) failed")
endif()

add_subdirectory(monero)

set(CMAKE_AUTOMOC ON)
set(CMAKE_AUTORCC ON)
set(CMAKE_AUTOUIC ON)
```

[xiphon]

You can reset the changes with git checkout CMakeLists.txt and then apply the patches again.

[selsta]

if(NOT MANUAL_SUBMODULES)
  find_package(Git)
  if(GIT_FOUND)
    if(NOT DEV_MODE)
      function (check_submodule relative_path)
        execute_process(COMMAND git rev-parse "HEAD" WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}/${relative_path} OUTPUT_VARIABLE localHead)
        execute_process(COMMAND git rev-parse "HEAD:${relative_path}" WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR} OUTPUT_VARIABLE checkedHead)
        string(COMPARE EQUAL "${localHead}" "${checkedHead}" upToDate)
        if (upToDate)
          message(STATUS "Submodule '${relative_path}' is up-to-date")
        else()
          message(FATAL_ERROR "Submodule '${relative_path}' is not using the checked head. Please update all submodules with\ngit submodule update --init --force --recursive\nor run cmake with -DMANUAL_SUBMODULES=1,\n or if you want to build from latest master run cmake with -DDEV_MODE=ON,\n or run make devmode")
        endif()
      endfunction ()
      message(STATUS "Checking submodules")
      check_submodule(monero)
    else()
      execute_process(COMMAND ${GIT_EXECUTABLE} fetch WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}/monero RESULT_VARIABLE GIT_FETCH_RESULT)
      execute_process(COMMAND ${GIT_EXECUTABLE} checkout -f origin/master WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}/monero RESULT_VARIABLE GIT_CHECKOUT_MASTER_RESULT)
      execute_process(COMMAND ${GIT_EXECUTABLE} submodule update --init --force --recursive WORKING_DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR}/monero RESULT_VARIABLE GIT_SUBMODULE_UPDATE_RESULT)
      if(NOT GIT_FETCH_RESULT EQUAL "0" OR NOT GIT_CHECKOUT_MASTER_RESULT EQUAL "0" OR NOT GIT_SUBMODULE_UPDATE_RESULT EQUAL "0")
        message(FATAL_ERROR "Updating git submodule to master (-DDEV_MODE=ON) failed")
      endif()
    endif()
  endif()
endif()

It should look like this.

[lulighttec]

I made it look like that, and still got the same errors, but this time they started on line 73. I included the CMakeLists.txt this time.
CMakeLists.txt

Here are the errors:

errors.txt

[xiphon]

Have a closer look at line 70 ending

[selsta]

If you want to try it from scratch, full list of commands:

git clone --recursive https://github.com/monero-project/monero-gui/ monero-gui2
cd monero-gui2
git pull origin pull/3094/head

Apply steps in this comment: https://github.com/monero-project/monero-gui/issues/3093#issuecomment-696242832 then back inside monero-gui2 folder:

mkdir -p build/release
cd build/release
cmake -D ARCH="armv7-a" -D MANUAL_SUBMODULES=ON -D CMAKE_BUILD_TYPE=Release ../..
make -j7

[lulighttec]

I fixed the missing end of line 70, as @xiphon suggested. (Must have been a copy/paste error)

Looked good until:
errors (1).txt

One thing mentioned is that some monero files were missing, as in not built yet, though the directory is there so I'm not sure why it couldn't find it.

[selsta]

It seems like you forgot -D MANUAL_SUBMODULES=ON and also broke your cmake file somehow. Can you try what I described here to make sure no spurious changes are included? https://github.com/monero-project/monero-gui/issues/3093#issuecomment-696451681

[lulighttec]

Ok, cloned as instructed into monero-gui2, cmake built the configuration, and then make -j7 resulted in some errors that looked concerned with x86-64, included here.

errors.txt

[xiphon]

Please comment out line 29 in CMakeLists.txt:

--- a/CMakeLists.txt
+++ b/CMakeLists.txt
@@ -26,7 +26,7 @@ if(DEBUG)
 endif()

 set(BUILD_GUI_DEPS ON)
-set(ARCH "x86-64")
+#set(ARCH "x86-64")
 set(BUILD_64 ON)

 find_package(Git)

[lulighttec]

For a second I thought we got a little farther, but no

errors.txt

[selsta]

Also did you make sure to delete your build directory before retrying? :)

[lulighttec]

i did, but never hurts to remind me ;-)

[lulighttec]

speaking of reminding me, remind me to get you two some lattes when we're done

[xiphon]

We are almost there, just don't do cd .. after running cmake step.

I.e.

root@odroid:/usr/src/monero-gui2/build/release# cd ..
root@odroid:/usr/src/monero-gui2/build# cd ..
root@odroid:/usr/src/monero-gui2# make -j7

Just run make -j7 right in build/release folder.

[lulighttec]

Should I be concerned about this?

CMake Warning:
    Manually-specified variables were not used by the project:

            CMAKE_CUILD_TYPE

(It's currently 27% into the build, so I guess not)

[selsta]

looks like you mistyped CMAKE_BUILD_TYPE during the cmake step

though afaik it should still work so you don't have to cancel the build.

[lulighttec]

That's what I thought too, but I don't remember typing that particular bit

[lulighttec]

Still going, but only at 36%, so... dinner time...

[lulighttec]

I woke up this morning, and it was finally finished in the monero-gui2/build/release/ folder, and the monerod bin (along with others) is in the monero-gui2/build/release/bin folder. Does this mean I can now 'make -j7' in the monero-gui2 folder?

[selsta]

there should be a monero-wallet-gui binary inside monero-gui2/build/release/bin, no more make necessary.

[lulighttec]

So about those lattes... :-D

[selsta]

does it work now? :) no crash?

[lulighttec]

It seems this way, I'm exiting root before I create the wallet and really make sure, but it got past the part where it crashed the first time

[lulighttec]

There's probably a quick and easy CLI command to write the contents of monero-gui2 over the original monero-gui, right? And will that break anything? like,
mv monero-gui2/* monero-gui/
or would

cd monero-gui2
find -exec mv {} ../monero-gui/ +

be better?

[selsta]

You should be able to move around the binaries, not sure about changing the whole folder. Might reduce in weird issues if you want to rebuild.

[lulighttec]

It is running, and currently downloading the blockchain. :-) Also, I opted for fixing a broken shortcut instead of moving anything around; seemed like a safer solution. Thank you so much for your help!

One question: is there a way to change the transparency of the interface? When it's in Dark mode, it almost blends in with the background (which is orange) with white floating text, but if I reverse it, the text becomes transparent on a white background, which is even _harder_ to read. If it means rebuilding, I probably won't bother, but if there's an easy fix...

Also, was serious about lattes.

[selsta]

One question: is there a way to change the transparency of the interface? When it's in Dark mode, it almost blends in with the background (which is orange) with white floating text, but if I reverse it, the text becomes transparent on a white background, which is even harder to read. If it means rebuilding, I probably won't bother, but if there's an easy fix...

Can you make a screenshot? Not sure what you mean with transparency.

Also, was serious about lattes.

:))

[lulighttec]

Took a while, but yes. lol Top photo is Dark theme, Bottom photo is Light Theme.

[selsta]

That’s definitely a bug, it should not look like that.. hmm

Which Qt version did you use to compile? Can you update your graphics drivers?

Alternatively you can start the GUI with the QMLSCENE_DEVICE=softwarecontext env var, but this will use the low quality renderer..

[lulighttec]

Qt Creator 4.11.0

Based on Qt 5.12.8 (GCC 9.3.0, 32 bit)

Anytime I tried to search for 5, I kept getting pointed here...
TBH, at first I thought it was just extra fancy, because when the wallet is locked, everything behind the password field is blurred and looks pretty cool LOL

Oh, and I should probably mention that that's the way the interface has looked (after it built) for me from day 1, so this looks the same as crashing binary did.

[lulighttec]

oooo, it really didn't like when I turned off custom decorations...
Luckily the hotspots still work for the checkboxes and I was able to set it back... the first time. the second time it crashed the whole shell :-o
I know now not to fiddle with that setting (since it's only for the titlebar).

[lulighttec]

I did a clean clone into (a fresh) /monero-gui (not the current monero-gui2) and applied patches with git pull (though 3094 wouldn't, so I had to manually remove "AND STATIC" from line 398). I decided to stop the daemon and go ahead and build it.

it's building _faster_ now...

[lulighttec]

Well, no errors anywhere that I could see this time; though something is still not quite right. Still had the crash when trying to check/uncheck the special decorations box. This is not a crucial component, right? Probably ok to load my wallet and continue downloading blockchain?

[selsta]

This is not a crucial component, right?

No, not crucial.

My only suggestion to fix these weird visual issues:

• Try to build with Qt 5.15 instead of 5.12
• update your graphics drivers (not sure if that is possible)

[lulighttec]

I'm not sure if that's possible either, (updating graphics drivers) but I'll try. Might be worth trying that first.

[lulighttec]

OMG, updated firmware and now it won't boot. This is a problem for a different chunk of github, but seriously? ready to cry

[selsta]

Does anything described here help? https://wiki.odroid.com/troubleshooting/odroid_flashing_tools

[lulighttec]

Well, that's what I was currently looking at. I was able to rescue the wallet file, and i can probably rescue the partially downloaded blockchain too, should i need to re-etch my card. I found a spare microSD and I'm flashing with the image. I'm hoping that will bring it back, and then I can go from there.

[lulighttec]

well, it boots again. in the process of putting things back together. Since I essentially had to start over, I'm taking the opportunity to build Qt 5.15 first.

[lulighttec]

It gets all the way to the end of the build and fails. I have a different error, though.

errors.txt

[selsta]

Anything different with this setup?

[lulighttec]

I built qt 5.15.1, built qt creator, otherwise no, I tried to do it exactly the same.

Sent from my iPhone

On Sep 27, 2020, at 9:28 PM, selsta [e-mail] wrote:



Anything different with this setup?

—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHubhttps://github.com/monero-project/monero-gui/issues/3093#issuecomment-699722169, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AB4VXZ25SGRMEMPWCSRSAILSH7RCRANCNFSM4RTEL5IA.

[selsta]

You have to set CMAKE_PREFIX_PATH to your Qt 5.15.1 path in your cmake command, else 5.12 from your package manager gets picked up. On my system it is -D CMAKE_PREFIX_PATH=~/dev/Qt/5.15.1/clang_64/, on your system it won’t be called clang_64 but something else.

[lulighttec]

Ok. I’ll try that. I put the path in the environment, but I guess it didn’t pick it up.

Sent from my iPhone

On Sep 27, 2020, at 9:34 PM, selsta [e-mail] wrote:



You have to set CMAKE_PREFIX_PATH to your Qt 5.15.1 path in your cmake command, else 5.12 gets picked up. On my system it is -D CMAKE_PREFIX_PATH=~/dev/Qt/5.15.1/clang_64/, on your system it won’t be called clang_64 but something else.

—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHubhttps://github.com/monero-project/monero-gui/issues/3093#issuecomment-699723395, or unsubscribehttps://github.com/notifications/unsubscribe-auth/AB4VXZ35XSJ6M4NTFJQTGDTSH7RZ5ANCNFSM4RTEL5IA.

[lulighttec]

CMAKE_PREFIX_PATH=/usr/local/Qt-5.15.1/bin/?

[selsta]

I think it should be without bin, just /usr/local/Qt-5.15.1/

Anyway if you want to try Qt 5.12.1 again make sure to remove 5.15 out of your path, I can imagine this producing weird issues.

[lulighttec]

I did make sure to clean out 5.12 to avoid weird issues before I started building again. At one point, if I was non-root, I had access to 5.15.1 in the path, but if I was root, only had access to 5.12. I fixed that.

It built last night, again with one error at the very end, but I used /bin/ on the end of the path. I do wish it didn't take 8 hours to get to the error at the end. I just set it to "make" again, this time without /bin/. I guess in about 7 hours I'll let you know what happens.

[lulighttec]

It got all the way through both cmake and make without any errors. However, when I try to run it:

errors.txt

Which application is it suggesting I reinstall?

[lulighttec]

Holdup... I ran from /usr/local/bin.... and... I think it's running... is _this_ it?

[selsta]

Looks good without graphics glitches :)

[selsta]

By the way, you can install ccache with your package manager it it will greatly speed up subsequent builds, but looks like you managed to build the GUI now anyway.

[lulighttec]

I wish I had known about ccache at the beginning... oh well, next time I'll know. Hopefully there won't be a next time. :-) Right now, it's syncing, and the interface doesn't seem to be doing any glitching or crashing, so I'm going to leave it be until it finishes and go to bed. I think we're there, though.

I may have spoken too soon. Doesn't appear to be syncing...

E Unexpected recv fail
I Failed to invoke http request to /json_rpc
D Wallet connection status changed 0
D checking connection status
D Wallet connection status changed 3
D Problems at read: Operation canceled

Just keeps looping this over and over

[xiphon]

Make sure you have monerod process running. You can start it from the GUI, see Settings -> Node tab.

[lulighttec]

I have tried, but monerod keeps failing when I start it, saying:

I SYNCHRONIZATION started
I [batch] DB resize needed
W Failed to set new mapsize: Cannot allocate memory
E Error in handle_invoke_map: Failed to set new mapsize: Cannot allocate memory

It won't go past this point, and if I type "exit" to try to stop the daemon, it will 'Stop signal sent', but the process never stops. Same thing with "stop_daemon". (I typed "help" at one point, and learned some commands.)

I should also add that I have tried rebooting to start fresh, and have tried starting the daemon from inside the gui, but it fails to start, so the gui suggests trying to start manually. When I start manually (from the terminal) I get what you see above.

[lulighttec]

Not only this, but once monerod is started, I can't get it to stop and free up the IPv4 binding so I can try again. It just keeps running and running, not doing anything. I even tried closing the terminal to kill the running process, and _that_ didn't work. Edit: learned how to properly use the kill command in terminal. Still, this is kind of a problem, yes?

[xiphon]

Cannot allocate memory

The device ran out of memory. Nothing we can do about it on the Monero GUI side.

[lulighttec]

That can't be the case. I'm looking at htop and it's definitely not, and it worked at least once right after I built it, and besides that, other things keep running, so how can this be?

[xiphon]

Do you have enough free space on the disk?

[lulighttec]

I have 92 of 128GB available, and I could probably dump some things and get a bit more if i needed to, though last I read the blockchain was only 75GB, so that should be enough, shouldn't it?

Edit: I have increased free space to 105GB. Same result.

[xiphon]

Could you try official monero ARMV7 cli binary? https://downloads.getmonero.org/cli/linuxarm7

[lulighttec]

^^^^This daemon works, and works with the gui, so it must be a build problem. I think my solution will be to replace what I built with what I just downloaded, and that should fix things, yes?

[xiphon]

Right.