Marlin: [BUG] AUTO_BED_LEVELING_3POINT movement to far

[schmerzlich]

Marlin-Dev2.1.x
Anet A8 Plus

AUTO_BED_LEVELING_3POINT ignores PROBE_OFFSET and point override (PROBE_PT_x_X) settings.

X - Axis runns in hard stop at X-max position.

The only way to set up usable probing positions is by setting the BED_SIZE smaller (as it is) or to set the MIN_PROBE_EDGE larger. But thats not the way of proper usability.

[boelle]

Configurations, please
Please ZIP up your Configuration.h and Configuration_adv.h files (as
requested in the Issue template) and drop them into your next reply.
We'll check them over and see if anything is amiss.

[shitcreek]

Is your machine a delta/scara?

[sjasonsmith]

Marlin-Dev2.1.x

This branch isn't currently up to date. You should ignore it and keep using bugfix-2.0.x for now.
Can you try it with the latest state of bugfix-2.0.x and report back if you still have the issue? If yes, be sure to post configs.

You will have to patch up your configs a bit. Definition of probe offsets and points has all changed versus what you are using now.

Be sure to use the latest state of bf2. A change was committed 15 hours ago for one issue impacting non-mesh bed leveling and probe offsets.

[schmerzlich]

Hello sjasonsmith,
thank you, I'll try this evening and give you a report.

Hey shitcreek, no it's not a delta.

[boelle]

what report do you have for us?

[schmerzlich]

I am sorry but everybody of my family is actually ill so I havent got any
time to analyse the problem so far.

Bo Herrmannsen [e-mail] schrieb am Sa., 16. Nov. 2019,
11:05:

what report do you have for us?

—
You are receiving this because you authored the thread.
Reply to this email directly, view it on GitHub
https://github.com/MarlinFirmware/Marlin/issues/15892?email_source=notifications&email_token=ANYLSLI66YV77GYVQ2BQSMLQT7AXHA5CNFSM4JM45CA2YY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOEEHOA5Y#issuecomment-554623095,
or unsubscribe
https://github.com/notifications/unsubscribe-auth/ANYLSLO7EF663LGOCEGGGLLQT7AXHANCNFSM4JM45CAQ
.

[boelle]

no problemo, have been ill myself with stomac flu

[sjasonsmith]

@schmerzlich, I'm sorry to hear your family was sick. I suggest we have @boelle (or you) close this issue, and it can be re-opened or a new one can be created if it doesn't work with the bugfix-2.0.x branch.

I have very recently tested AUTO_BED_LEVELING_3POINT on bugfix-2.0.x with and without custom probe points, and I believe it will work for you from that branch.

[boelle]

as @sjasonsmith says we can reopen this one if it does not work

[github-actions[bot]]

This issue has been automatically locked since there has not been any recent activity after it was closed. Please open a new issue for related bugs.