Marlin: [BUG] [bugfix-2.0.x] Start print from SD Card requires extra step resume print

Created on 22 Jun 2019 · 16Comments · Source: MarlinFirmware/Marlin

Description

Start print from SD Card intruduces now a dialog wether to print or cancel.
After confirmation to print nothing happens.
Klick rotator to enter menu, select resume print and confirm selection with rotator klick starts print.

Steps to Reproduce

[First Step]
[Second Step]
[and so on...]

Expected behavior: [What you expect to happen]
Print starts after confirmation of "print" in dialog.

Actual behavior: [What actually happens]
Nothing happens, unless you manually select resume print in menu.

Additional Information

Include a ZIP file containing your Configuration.h and Configuration_adv.h files.
Provide pictures or links to videos that clearly demonstrate the issue.
See How Can I Contribute for additional guidelines.

Source

han9988

All 16 comments

See https://github.com/MarlinFirmware/Marlin/issues/14331

thisiskeithb on 22 Jun 2019

Try a snapshot from today. A fix was merged last night.

InsanityAutomation on 22 Jun 2019

👍1

and if it fails attach 2 config files as a zip file, just in case :-)

boelle on 22 Jun 2019

Thanks for the quick response. I'll try tomorrow,
there is currently a longer print running.

han9988 on 22 Jun 2019

Try a snapshot from today. A fix was merged last night.

The latest snapshot makes my printer reboot when confirming the file to print.

Reprapdiscount full graphic and MKS GEN L on an Ender 3.

alexzkter on 22 Jun 2019

👍1

OK, tried the latest download but problem persists.
Is there a special location for the snapshot download? I downloaded from Tab "code" select 2.0 branch and downloaded zip.

han9988 on 23 Jun 2019

config files.zip
Here are my config files as requested earlier.

han9988 on 23 Jun 2019

Just flashed todays snapshot on a machine and started an SD print without an issue. Ill review the config files above and see if anything jumps out.

InsanityAutomation on 23 Jun 2019

config files.zip
Here are my config files as requested earlier.

Looks like youre dealing with a REARM @han9988 but I dont see why anything would be different. Very basic SD config, no sorting ect. Id make sure the build environment is cleaned and reflash to make sure nothing was stale and try again.

InsanityAutomation on 23 Jun 2019

Same issue here with arduino2560, RAMPS1.6 and 12864 LCD. I'm using master branch with last commits. On dialog box, I select PRINT, and then it reboots.

Minims on 23 Jun 2019

Confirming that the latest commit resets the machine when starting a print via SD card. In my case with an Auto0.g file on the sd card, the machine resets itself again upon booting up then freezes unless I pull out the SD card in time.