Marlin: X Home always in negative

[alkduss]

Hello, I have a HBot DYI 3D printer and I have Marlin installed. The problem is that after homming, LCD report X-150, Y0 and Z0. X always show negative value and always I use LCD command for reset this value.
My machine is a HBot 3D printer DYI and I have X, Y and Z home probes at MIN and it works correctly, except for the message that appears later "X-150". What I can do? Very Thanks!!!

[alkduss]

I have reviewed Configuration.h several times and can not find any value that is set to -150 or X_BED_SIZE or X_MIN_POS or X_MAX_POS. In the Marlin I find everything correctly. Very Thanks

[swilkens]

Please post your configuration.h and configuration_adv.h as well as the output of M503 if possible.

Zip the files and attach them here.

[Ludy87]

Load your configuration.h and configuration_avd.h to GitHub

[alkduss]

OK guys, as soon as I can upload the files and the result of the M503 command for your valuable help. Very, very thanks!!!

[alkduss]

Hi guys, reviewing the M503 command, I realized that the M206 command applies the offsets to 0 where the hotend is located. I executed it and now it is working correctly, however I send the documents for review in case they think I should adjust something else.

COREXY.zip

[swilkens]

Great, if your issue is now fixed remember to close the issue report 😉

[thinkyhead]

M502, M500 is always advised as a first troubleshooting step.

[alkduss]

Sorry for the delay, the problem was solved with the information that shows the M503 command, Thanks to everyone

[alkduss]

Oh. I'm sorry... I had already answered

[github-actions[bot]]

This issue has been automatically locked since there has not been any recent activity after it was closed. Please open a new issue for related bugs.