Ironos: Start in standby mode

[HanaO00]

Hello, I wanted to try both options:

• SettingStartSleep
• SettingStartSleepOff

With the first, the device is supposed to start in standby mode and therefore go to the temperature designated in the options I think, but with the second, the temperature is supposed to go to room temperature, I put the TS100 down and set this option, but by turning on the iron, without moving it so that it remains in standby mode, the temperature rises to the same as the normal set temperature, is this normal?

[discip]

@HanaO00
Good afternoon,
if you want to get help quicker, it would be nice, if you would let people know,

1. which device you are referring to (I am aware of you mentioning the TS100. Just for integrity.)
2. what firmware you are using,
3. which PCB version is present in your device &
4. what power supply you feed your iron from.

That way, the range of possible roots to the issue could be narrowed down.

example

Copy the text below and change the values to those corresponding to your setup,

c# iron | Firmware Version | PCB Version | Power Supply -|-|-|- **TS100** | **https://github.com/Ralim/IronOS/commit/2052f308b09f7357d91e7aba80ffbda490fc6769** | **1** | **Powerbank_XY**

to make it look like this:

iron | Firmware Version | PCB Version | Power Supply
-|-|-|-
TS100 | https://github.com/Ralim/IronOS/commit/2052f308b09f7357d91e7aba80ffbda490fc6769 | 1 | Powerbank_XY

[HanaO00]

iron | Firmware Version | PCB Version | Power Supply
-|-|-|-
TS100 | https://github.com/Ralim/IronOS/commit/8acfc7e587184d947c054d7e039961b10a3c3e0e | 2 | DC5525 - 24V

[discip]

@Ralim
After you managed to successfully tackle a similar issue for the TS80P, now its grandfather (TS100) needs to get your attention as well. 😄

[Ralim]

PCB version 2 has the same accelerometer and same code as @discip's TS80P.

@HanaO00 Could you try the latest master build to confirm if the issue still applies?

[HanaO00]

It works, thank you @Ralim & @discip