Inav: omnibus f4 ledstripm5 leds not working

[JurikRistjouw]

Current Behavior

leds don't work

Steps to Reproduce

flash 2.3.0

Expected behavior

leds that work

Additional context

diff

version

INAV/OMNIBUSF4PRO_LEDSTRIPM5 2.3.0 Nov 6 2019 / 19:49:08 (567787ef7)

GCC-8.3.1 20190703 (release) [gcc-8-branch revision 273027]

start the command batch

batch start

resources

mixer

mmix 0 1.000 -1.000 1.000 -1.000
mmix 1 1.000 -1.000 -1.000 1.000
mmix 2 1.000 1.000 1.000 1.000
mmix 3 1.000 1.000 -1.000 -1.000

servo mix

smix 0 0 11 100 0 -1

servo

logic

gf

feature

feature DYNAMIC_FILTERS
feature GPS
feature TELEMETRY
feature CURRENT_METER
feature RSSI_ADC
feature LED_STRIP
feature PWM_OUTPUT_ENABLE

beeper

map

map TAER

serial

serial 0 64 115200 115200 0 115200
serial 5 2 115200 115200 0 115200

led

led 0 11,10:S:FW:0
led 1 12,10:S:F:0
led 2 13,10:S:FN:0
led 3 6,10:S:FW:0
led 4 5,10:S:F:0
led 5 4,10:S:FN:0

color

mode_color

aux

aux 0 0 1 1800 2100
aux 1 1 0 1125 1275
aux 2 2 0 1275 1500
aux 3 4 2 900 2100
aux 4 3 2 1400 2100
aux 5 9 2 1400 1650
aux 6 8 4 1925 2100
aux 7 19 3 1925 2100
aux 8 21 4 900 1150
aux 9 17 1 1800 2100

adjrange

rxrange

temp_sensor

wp

wp 0 invalid

osd_layout

osd_layout 0 0 0 0 V
osd_layout 0 1 0 12 H
osd_layout 0 3 8 6 H
osd_layout 0 7 13 13 H
osd_layout 0 9 11 14 H
osd_layout 0 11 0 14 V
osd_layout 0 12 5 14 V
osd_layout 0 13 22 7 V
osd_layout 0 14 3 0 V
osd_layout 0 15 3 7 V
osd_layout 0 22 23 0 V
osd_layout 0 23 24 0 V
osd_layout 0 26 26 1 H
osd_layout 0 28 23 14 V
osd_layout 0 30 2 13 V
osd_layout 0 32 0 14 H
osd_layout 0 34 10 0 V
osd_layout 0 40 19 0 H
osd_layout 0 54 0 13 V
osd_layout 0 96 19 1 H
osd_layout 0 97 10 14 V

master

set looptime = 500
set gyro_hardware_lpf = 256HZ
set gyro_lpf_hz = 100
set gyro_lpf_type = PT1
set gyro_stage2_lowpass_hz = 200
set acc_hardware = MPU6000
set acczero_x = 54
set acczero_y = -4
set acczero_z = 157
set accgain_x = 4099
set accgain_y = 4058
set accgain_z = 4003
set align_mag = CW270FLIP
set mag_hardware = HMC5883
set mag_declination = 150
set magzero_x = 122
set magzero_y = -101
set magzero_z = -131
set baro_hardware = BMP280
set pitot_hardware = NONE
set receiver_type = SERIAL
set serialrx_provider = FPORT
set motor_pwm_rate = 4000
set motor_pwm_protocol = MULTISHOT
set failsafe_delay = 9
set failsafe_procedure = RTH
set bat_voltage_src = SAG_COMP
set yaw_jump_prevention_limit = 200
set model_preview_type = 3
set applied_defaults = 2
set gps_sbas_mode = EGNOS
set gps_ublox_use_galileo = ON
set gps_min_sats = 8
set deadband = 1
set yaw_deadband = 4
set mc_airmode_type = THROTTLE_THRESHOLD
set nav_auto_climb_rate = 300
set nav_manual_speed = 1000
set nav_manual_climb_rate = 1000
set nav_landing_speed = 300
set nav_land_slowdown_minalt = 300
set nav_land_slowdown_maxalt = 500
set nav_rth_climb_first = OFF
set nav_rth_alt_mode = CURRENT
set osd_video_system = PAL
set osd_left_sidebar_scroll = ALTITUDE
set osd_right_sidebar_scroll = GROUND_SPEED
set osd_sidebar_scroll_arrows = ON
set name = DiatoneGPS

profile

profile 1

set mc_p_pitch = 44
set mc_i_pitch = 60
set mc_d_pitch = 25
set mc_i_roll = 50
set mc_d_roll = 25
set mc_p_yaw = 45
set mc_i_yaw = 70
set dterm_lpf_hz = 90
set use_dterm_fir_filter = OFF
set yaw_p_limit = 300
set d_boost_factor = 1.500
set antigravity_gain = 2.000
set antigravity_accelerator = 5.000
set rc_yaw_expo = 70
set roll_rate = 70
set pitch_rate = 70
set yaw_rate = 60

battery_profile

battery_profile 1

set battery_capacity = 1500
set battery_capacity_warning = 225
set battery_capacity_critical = 150

• FC Board name and vendor:# omnibus f4pro
• INAV version string: INAV/OMNIBUSF4PRO_LEDSTRIPM5 2.3.0 Nov 6 2019 / 19:49:08 (567787ef7)
  

  GCC-8.3.1 20190703 (release) [gcc-8-branch revision 273027]

Thanx in advance!

Jurik

[issue-label-bot[bot]]

Issue-Label Bot is automatically applying the label BUG to this issue, with a confidence of 0.89. Please mark this comment with :thumbsup: or :thumbsdown: to give our bot feedback!

Links: app homepage, dashboard and code for this bot.

[JurikRistjouw]

2.2.1 fine, 2.3.0rc1 fine (but baro not working) from thereon rc2 (baro working again leds fail) and 2.3.0 leds fail.

[Andrey-Prikupets]

Same with me. 2.2.1 = LEDs on M5 work fine; 2.3.0 = LEDs on M5 do not work;

[tiriad]

I've been looking at the code and in the last changes has been ignored a line that influences the behavior of the led in this target, in this compilation attached should be corrected, please try the rest of features if they could be affected, if it works correctly for the next version the change will be included

inav_2.3.0_OMNIBUSF4PRO_LEDSTRIPM5.zip

[JurikRistjouw]

@tiriad you sir, are a miracle worker! Thank you. Leds are working again!

[LawrenceLDJr]

Omnibus F4 V3 has this problem too.