Fluxion: AP Jammer Issue

[leavmealonepy]

---

Read the wiki?

No*

Do you want to request a feature or report a bug?

Bug

What is the current behaviour?

AP Jammer doesn't work.
"Periodically re-reading blacklist/white list every 3 seconds" but not packets being sent.

If the current behaviour is a bug, please provide the steps to reproduce it.

Fake AP attack

What do you think the expected behaviour should be?

AP Jammer should send something?

If this is a feature request, what is the motivation or use case for the added feature?

Specs

Paste the output of ./script/diagnostics.sh [interface]
[ Interface (wlan0mon) Info ]
Device: phy0
Driver: iwlwifi
Chipset: Intel Corporation Wireless 7260 (rev 73)
Injection Test: ioctl(SI0CSIWMODE) failed: Device or resource busy
Injection is working!

[ XTerm Info ]
Version: XTerm(331)
Path: /ust/bin/XTerm
Test: XSevrer/XTerm success!

[ HostAPD Info ]
hostapd v2.6
User space deamon for IEEE 802.11 AP management,
IEEE 802.1X/WPA/WPA2/ETAP/RADIUS Authentic autor
Copyright (c) 2002-2016, Jouni Makiem [e-mail] and controbutors
Path: /ust/sbin/hostapd

[ Aircrack-ng Info ]

Aircrack-ng 1.2 rc4 - (C) 2006-2015 Thomas d'Otreppe
http://www.aircrack-ng.org

[ System Info ]

Linux version 4.14.0-kali3-amd64 ([email protected]) (gcc version 7.2.0 (Debian 7.2.0-18)) #1 SMP Debian 4.14.12-2kali2 (2018-01-11)

[spraragen88]

I had the same problem, here was my fix:

apt update && apt install pkg-config (not sure if this helped, but its a step I took anyways)
apt-get install libnl-genl-3-200 libnl-genl-3-dev libnl-idiag-3-dev libpcap-dev (required to install MDK3)
svn co https://svn.mdk3.aircrack-ng.org/mdk3/

Then go into mdk3 folder, run make/make install

[leavmealonepy]

Nothing :/

[deltaxflux]

First things first, read the wiki before posting issues. I also strongly recommend looking for other mdk3 issues before posting here.
There are some open.

178

245

246

302

318

329

However dynamic deauth is an enchantment with is actual not developt yet. So please be patient.

[leavmealonepy]

I made this post on phone, and i doesn't saw question about wiki.
I am looking hole day for an solution.

[deltaxflux]

I think it is a chipset issue. Buy a prober wireless card and you are good to go.

[rootuser9006]

@spraragen88 how to make the last step ?because therw is no make/make install in my mdk3 folder after i follow your step

[deltaxflux]

Really you fail while installing mdk3. Maybe you should try something else besides fluxion.

[rootuser9006]

ita ok now
i type :
sudo make install
in the last step,now my ap jammer is fixed.
thanks

[rootuser9006]

so my solution is(all below is what i write in the terminal )
1.apt update(click enter)
2.apt install pkg-config (click enter)
3.apt-get install libnl-genl-3-200 libnl-genl-3-dev libnl-idiag-3-dev libpcap-dev (click enter)
4.svn co https://svn.mdk3.aircrack-ng.org/mdk3/(click enter)
5.cd mdk3 (click enter)
6..sudo make installer(click enter)
then my ap jammer will send deauth now
but sadly the fluxion ap jammer service suddenly disappear after 4 min
is it nornal?will update again if anything happen

[rootuser9006]

mdk3 keep closing...while in the fluxion captive portal
after sending some attack the fluxion ap jammer service keep closing...
any fix or what i did wrong?
version of fluxion v3r11

[rootuser9006]

ap jammer keep forced close while in captive portal
it happen after i update mdk3
any suggestion yo solve this？

[rootuser9006]

ap jammer keep forced close while in captive portal
it happen after i update mdk3
any suggestion to solve this？

[rootuser9006]

sorry i just see your email.
my wifi card is dlink dwa 548,ralink 5392 chipset.

i tried injection and it is work,
but when i send deaut(mdk3)to my android phone...nothing happen,
it doesnt disconnect at all.

capture handshake only when i manually reconnect to my router .

and now after i sucessfully install latest mdk3,fluxion ap jammer service
crash within few minutes
(auto close)(with success sending deauth)(but no effect on my phone)

i tried older version of fluxion which is 0.24 v128
the ap jammer dint crash(but still doesnt affect my phone either)my phone
just standstill(no disconnect)

any suggestion?or is it something wrong with my wifi chip?

On Mar 9, 2018 4:14 PM, "deltax" [e-mail] wrote:

Really you fail while installing mdk3. Maybe you should try something else
besides fluxion.

—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub
https://github.com/FluxionNetwork/fluxion/issues/365#issuecomment-371743532,
or mute the thread
https://github.com/notifications/unsubscribe-auth/Aje6wt9fUCIpn8QE2CxRBBv375K2ZhNnks5tcjnsgaJpZM4RrwnN
.

[apocalipsys]

Hola, SOLUCIONADO.
En mi caso me funciono.
apt-get install pkg-config libnl-3-dev libnl-genl-3-dev
cd /mdk4-master
make
sudo make install
despues, edité el archivo attack.sh que está en la carpeta /attacks/captive portal/
linea 1505:
"mdk3 $CaptivePortalJammerInteface d -c $FluxionTargetChannel blablabla...."
cambié mdk3 por mdk4 y quedaria asi:
"mdk4 $CaptivePortalJammerInteface d -c $FluxionTargetChannel blablabla...."
Espero les sirva, saludos!

Tambien queria comentar otra cosa: despues de lograr el handshake snooper con éxito y tenemos que elegir la opcion "seleccionar otro ataque", cuando se elige el ataque " portal cautivo" y nos dá la lista de interfaces wifi, hay que abrir otra terminal y ejecutar el comando ifconfig para ver las interfaces con nombre "fluxwlX". Una vez que tengamos estos datos escribir el siguiente comando
iw fluxwlX del
Por ejemplo, si tiene fluxwl0, fluxwl1 y fluxwl2, el comando seria:
iw fluxwl0 del
iw fluxwl1 del
iw fluxwl2 del
Una vez hecho esto, ejecutar el comando airmon-ng
y presionar Y en las 3 oportunidades (o las que sea dependiendo de cuantas interfaces hemos utilizado en la etapa de handshake snooper)
esto hace que nuestras interfaces se liberen
Entonces volvemos a la terminal donde nos quedamos en un principio (cautive portal attack) , donde fluxion nos dá la lista de las interfaces wifi y elegimos la opcion "repeat" y asi con eso fluxion nos va a dar denuevo la lista de interfaces, pero esta vez "LIBERADAS" y podemos continuar con el ataque sin problemas.

[hyekalhitech]

hello @apocalipsys

im trying to use your method. but im stuck at

"sudo make install"

here is what i do.

i download mdk4 from github using command

"git clone https://github.com/aircrack-ng/mdk4.git- ."

download was success. and next i run

"sudo make"

and ended up with this error

"dumpfile.c:2:10 fatal error: pcap.h: no such file or directory

include

compilation terminated.
make[1]: * [: dumpfile.o] Error 1
make [1] Leaving directory '/root/mdk4-master/src'
make * [makefile:9: all] Error 2"

how to solve this? im unable to install mdk4 on my kali. anybody has mdk4 download link that working with fluxion?

[hyekalhitech]

@apocalipsys hai pls answer me. asap

[rootuser9006]

i tried all solution i can find in the internet
but i cant diagnose the issue so i uninstall linux already
no longer use the software
thanks

On Sat, Nov 17, 2018 at 5:34 PM hyekalhitech [e-mail]
wrote:

@apocalipsys https://github.com/apocalipsys hai pls answer me. asap

—
You are receiving this because you commented.
Reply to this email directly, view it on GitHub
https://github.com/FluxionNetwork/fluxion/issues/365#issuecomment-439603653,
or mute the thread
https://github.com/notifications/unsubscribe-auth/Aje6wpqp9tULYvBrvTb7bnKqTGHuIUTHks5uv9g4gaJpZM4RrwnN
.

[hyekalhitech]

@rootuser9006 use different version of mdk3

[deltaxflux]

Use the newer mdk4 version.

[apocalipsys]

@hyekalhitech
apt-get install pkg-config libnl-3-dev libnl-genl-3-dev
cd /mdk4-master
make
sudo make install

[apocalipsys]

@apocalipsys hai pls answer me. asap
first instal mdk4 from github...
like: git clone https://github.com/aircrack-ng/mdk4.git
and then
apt-get install pkg-config libnl-3-dev libnl-genl-3-dev
cd /mdk4-master
make
sudo make install

[genericc]

yes on new kali and ubuntu 16.4 same error
root@uptimelinux:~/mdk4-master# apt-get install pkg-config libnl-3-dev libnl-genl-3-dev
Reading package lists... Done
Building dependency tree
Reading state information... Done
pkg-config is already the newest version (0.29.1-0ubuntu1).
libnl-3-dev is already the newest version (3.2.27-1ubuntu0.16.04.1).
libnl-genl-3-dev is already the newest version (3.2.27-1ubuntu0.16.04.1).
The following packages were automatically installed and are no longer required:
linux-headers-4.4.0-109 linux-headers-4.4.0-109-generic linux-headers-4.4.0-112 linux-headers-4.4.0-112-generic
linux-image-4.4.0-109-generic linux-image-4.4.0-112-generic linux-image-extra-4.4.0-109-generic
linux-image-extra-4.4.0-112-generic
Use 'apt autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 24 not upgraded.

root@uptimelinux:~/mdk4-master#

ttacks/ieee80211s.o attacks/probing.o attacks/wids.o -o mdk4 -lnl-genl-3 -lnl-3 -lm -Losdep -losdep -lpthread -lpcap
mdk4.c: In function ‘main’:
mdk4.c:168:3: warning: ignoring return value of ‘setuid’, declared with attribute warn_unused_result [-Wunused-result]
setuid(getuid());
^
make -C attacks
make[2]: Entering directory '/root/mdk4-master/src/attacks'
make[2]: Nothing to be done for 'all'.
make[2]: Leaving directory '/root/mdk4-master/src/attacks'
make[1]: Leaving directory '/root/mdk4-master/src'
PREFIX:=/usr/local make -C src install
/bin/sh: 1: PREFIX:=/usr/local: not found
Makefile:13: recipe for target 'install' failed

make: * [install] Error 127

any idea how fix this?

[strasharo]

We're not developing mdk4, contact the developers of the tool.