Esp-homekit-devices: Impossible to enter in setup mode

Created on 8 Dec 2019  Â·  12Comments  Â·  Source: RavenSystem/esp-homekit-devices

Hello!
After updating to HAA v0.7.10, I try to enter in setup mode (I toggle quickly the switch 8 times) but without result...
the HAA network appears for a few seconds .... but it is impossible to connect to it. Thean shortly after, the accessory “no responds”.

What could be the problem?

HAA

Most helpful comment

Try with ip address.

All 12 comments

From the Wiki:

Once device is in setup mode, you can access to a webGUI connecting to device IP address or hostname http://HAA-XXXXXX (in case a WiFi is configured) or connecting directly to a WiFi AP generated (HAA-XXXXXX) if configured WiFi network is not available.

thanks! I tried to connect to the hostname, but it doesn't work.

Try with ip address.

Same issue here. No HAA-XXX network ever showing up.
Tried toggling more than 8 times fast & slow.
Its on the network!

iMac:~ brymonster$ ping haa-b7c3ed.local
PING haa-b7c3ed.local (192.168.1.15): 56 data bytes
64 bytes from 192.168.1.15: icmp_seq=0 ttl=255 time=28.100 ms
64 bytes from 192.168.1.15: icmp_seq=1 ttl=255 time=21.938 ms
64 bytes from 192.168.1.15: icmp_seq=2 ttl=255 time=9.291 ms
64 bytes from 192.168.1.15: icmp_seq=3 ttl=255 time=17.761 ms
64 bytes from 192.168.1.15: icmp_seq=4 ttl=255 time=29.155 ms
64 bytes from 192.168.1.15: icmp_seq=5 ttl=255 time=40.939 ms
64 bytes from 192.168.1.15: icmp_seq=6 ttl=255 time=35.474 ms
64 bytes from 192.168.1.15: icmp_seq=7 ttl=255 time=10.757 ms
^C
--- haa-b7c3ed.local ping statistics ---
8 packets transmitted, 8 packets received, 0.0% packet loss
round-trip min/avg/max/stddev = 9.291/24.177/40.939/10.587 ms
iMac:~ brymonster$ ping 192.168.1.15
PING 192.168.1.15 (192.168.1.15): 56 data bytes
64 bytes from 192.168.1.15: icmp_seq=0 ttl=255 time=13.908 ms
64 bytes from 192.168.1.15: icmp_seq=1 ttl=255 time=12.256 ms
64 bytes from 192.168.1.15: icmp_seq=2 ttl=255 time=164.790 ms
64 bytes from 192.168.1.15: icmp_seq=3 ttl=255 time=117.161 ms
64 bytes from 192.168.1.15: icmp_seq=4 ttl=255 time=114.602 ms
64 bytes from 192.168.1.15: icmp_seq=5 ttl=255 time=103.868 ms
64 bytes from 192.168.1.15: icmp_seq=6 ttl=255 time=11.409 ms
^C
--- 192.168.1.15 ping statistics ---
7 packets transmitted, 7 packets received, 0.0% packet loss
round-trip min/avg/max/stddev = 11.409/76.856/164.790/58.469 ms

What version of haa are you using? With new version is changed the way to enter settings in setup mode. You must enter ip address/hostname of your haa device.

I solved by connecting to the ip address. with the hostname it didn't work

HAA .8.2
Yes. I have tried using multiple browsers.
Both http://www.haa-b7c3ed and http://192.168.1.15

How long do you have to wait after the 8 toggle dance for setup mode to start?

When you see in home app that you can’t controll the device , wait 2-3 secs and open browser.

ohh. I didnt realize that was an indication of Setup Mode! I will keep trying!

I just toggled it prob 100 times. Home app never lost control.

Success. holy moly. thanks guys.
Wow, that Setup Mode. Achievement unlocked.

Was this page helpful?
0 / 5 - 0 ratings

Related issues

maciekfreak picture maciekfreak  Â·  4Comments

i3laze picture i3laze  Â·  3Comments

xrust83 picture xrust83  Â·  3Comments

fluppie picture fluppie  Â·  5Comments

Codi878 picture Codi878  Â·  3Comments