Esp-homekit-devices: Support for Sonoff 4ch / 4ch Pro

[omarkmsft]

Would it be possible to add support for Sonoff 4ch / 4ch Pro? Would be happy to help test on my device.

[RavenSystem]

Of course that is possible to suport Sonoff 4ch. The problem is that I don’t have one. My devices are Sonoff Basic, S20, S22 and TH16. I want to suport dual and 4ch too. Your help is welcome.

Can you install the Sonoff_Basic firmware and post here the results? I need an initial idea and I need what are the similar elements with Sonoff Basic switch.

Another question: your device is 4ch or 4ch pro? I think that are differents.

Many thanks.

[Arduingo]

These are the GPIO Used in the 4CH

GPIO13 | Status LED (blue)
GPIO12 | Relay 1
GPIO05 | Relay 2
GPIO04 | Relay 3
GPIO15 | Relay 4
GPIO00 | Button 1 / Flash
GPIO09 | Button 2
GPIO10 | Button 3
GPIO14 | Button 4

The 4CH uses a ESP8285, the PRO uses a ESP8285 and an STM32, STM32 is used for some features related switching relay modes, but as far I have read and remember from the schematic relays and buttons can be controlled from the ESP too

[RavenSystem]

According to info provides by @Arduingo , I have released the code of Sonoff 4ch. Feel free to test it and comment (Try it on 4ch and 4ch Pro too).

Many thanks.

[omarkmsft]

Thanks RavenSystem I will try this weekend. I have 4ch Pro. Will let you know result.

[Arduingo]

@omarkmsft maybe the PRO has a couple of relay signals inverted, please take not of that, also if you can try de behavior with different dip switch configurations will help adjust the code

[omarkmsft]

@RavenSystem @Arduingo any chance one of you could build 4ch binary and drop in releases for me? I'm trying to setup a build environment on my box but running into issues. Would go faster if I could get a binary.

[omarkmsft]

i was able to build fine so no need to drop a binary. I'll try flashing sometime in next few days.

[RavenSystem]

@omarkmsft Excellent!

[omarkmsft]

Got it flashed to my Sonoff 4ch Pro today and was able to connect to Homekit directly from device - awesome! Ch1/Switch 1 seems to be responding to DIP switch settings 2sec On then Off relay. Apple homekit updates after 2 seconds of on which is cool.

Somehow Ch2, Ch3, Ch4 - don't have that behavior. Not sure if that is switch settings on board, or something to do with firmware. All I use is Ch1 so ok for now.

[omarkmsft]

btw this video is helpful in showing how to get 4ch Pro in boot loader mode for flashing - https://www.youtube.com/watch?v=hOFvbdYkOII

[kiralikbeyin]

https://github.com/RavenSystem/esp-homekit-devices/issues/18

[kiralikbeyin]

@omarkmsft Are you using v1.1 or v2 4ch-pro?

[simoneorsi]

with the new ravencore firmware release all my sonoff 4ch pro stop to work.
Interlocking mode didn`t funcion more. I truy to downagrade the firmware but i connot do it!
any suggestion?
thaks

[RavenSystem]

@simoneorsi What version was you using before, and what are you using now?

[simoneorsi]

@ José A. Jiménez, actually I have installed a new release 0.5.13, the old one was 0.4.10.

Il giorno 16 gen 2019, alle ore 15:22, José A. Jiménez [e-mail] ha scritto:

@simoneorsi https://github.com/simoneorsi What version was you using before, and what are you using now?

—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub https://github.com/RavenSystem/esp-homekit-devices/issues/4#issuecomment-454864648, or mute the thread https://github.com/notifications/unsubscribe-auth/Asl0ZAnt1Yk5wma7oJm5OTg296hIq0CXks5vD1_AgaJpZM4SM5up.

[RavenSystem]

@simoneorsi There is a lot of changes since 0.4.10. Please, update to last version 0.5.14 and provide logs and details of your bug. I suggest to open a new issue with all info about.

[simoneorsi]

@José A. Jiménez you know I can downgrade to 0.4.10 because all my sonoff control all roll-up shutter and now are all locked.
I try to downgrade with old file that I had backupup but the son off after I configure ota repositopry and ota binary file stay freeze.
thanks a lot

Il giorno 16 gen 2019, alle ore 15:35, José A. Jiménez [e-mail] ha scritto:

@simoneorsi https://github.com/simoneorsi There is a lot of changes since 0.4.10. Please, update to last version 0.5.14 and provide logs and details of your bug. I suggest to open a new issue with all info about.

—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub https://github.com/RavenSystem/esp-homekit-devices/issues/4#issuecomment-454869327, or mute the thread https://github.com/notifications/unsubscribe-auth/Asl0ZLOceq3ziLuEGjjO9DS9ymqLFi1Xks5vD2LSgaJpZM4SM5up.

[simoneorsi]

@ José A. Jiménez Ok, now I have download a new version 0.5.1.15, but I have the same problem. The interlock of the channel don`t function.

Il giorno 16 gen 2019, alle ore 15:40, Simone Orsi [e-mail] ha scritto:

@José A. Jiménez you know I can downgrade to 0.4.10 because all my sonoff control all roll-up shutter and now are all locked.
I try to downgrade with old file that I had backupup but the son off after I configure ota repositopry and ota binary file stay freeze.
thanks a lot

Il giorno 16 gen 2019, alle ore 15:35, José A. Jiménez <[email protected] [e-mail]> ha scritto:

@simoneorsi https://github.com/simoneorsi There is a lot of changes since 0.4.10. Please, update to last version 0.5.14 and provide logs and details of your bug. I suggest to open a new issue with all info about.

—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub https://github.com/RavenSystem/esp-homekit-devices/issues/4#issuecomment-454869327, or mute the thread https://github.com/notifications/unsubscribe-auth/Asl0ZLOceq3ziLuEGjjO9DS9ymqLFi1Xks5vD2LSgaJpZM4SM5up.