Ecma262: Add Function#caller and Function#arguments to Annex B

[claudepache]

... because I doubt that any browser vendor would kill them.

I have written a strawman here: https://github.com/claudepache/es-legacy-function-reflection

Some notes:

• Function#caller and Function#arguments are specced as configurable getters on Function.prototype rather than properties of individual functions, following Firefox's example.
• Moreover, a basic realm check is performed (step 3 of GetTopMostExecutionContextIfLeakable), so that after those properties are deleted, they cannot be recovered from another realm.
• As arguments.caller is not supported by any browser, I think that step 9 of CreateUnmappedArgumentsObject can be removed.
• arguments.callee is currently specced in ECMA262 as unavailable for sloppy-mode functions with nonsimple parameter list. Question: Should Function#arguments and Function#caller be disabled for those functions as well?

[claudepache]

In fact, arguments.callee is already specced as Step 24 of CreateMappedArgumentsObject, and it was already specced in ES3. Restricting that issue to Function#caller and Function#arguments

[claudepache]

EDIT 2019-12-09: Modified the test functions in order to prevent PTC to be triggered, and added Safari 13 result.

---

Different browsers have different semantics for Function#caller.

Consider the function:

function f() {
    var r = f.caller;
    return r;
}

Consider the testcases:

// the caller is a sloppy-mode function
(function g() { 
    var r = f();
    return r;
})();

// the caller is a strict-mode function
(function h() { 
    "use strict";
    var r = f();
    return r;
})();

// the caller is a built-in function
[1,2].reduce(f);
// the following additional test may show that PTC has not eliminated reduce() in Safari:
[1,2].reduce(function f () { throw new Error; }); // and inspect the stack of the error

Here are the results:

| Browser | caller is sloppy (g) | caller is strict (h) | caller is builtin (reduce) |
| --- | --- | --- | --- |
| Safari 9 | g() | throw a TypeError | reduce() 👎 |
| Safari 13 | g() | throw a TypeError | null |
| Firefox 46 | g() | throw a TypeError | null |
| Chrome 50 | g() | null | null |
| Edge 13 | g() | null | reduce() 👎 |

The question is: Do we pick the semantics of Firefox or the one of Chrome?

[bterlson]

The goal here is to specify the absolute minimum observable semantics required to run web code.

Edge 15 throws a TypeError for case h, so we should probably go with that since it's not likely to break the web.

If caller is built-in, null seems best. I'd prefer a TypeError but that seems unlikely to be web compatible?

Function#arguments and Function#caller should be disabled for functions with non-simple parameter lists (ie. not have the own properties, so look up to throwers). Spidermonkey seems to do this now so we can probably get away with this too?

[littledan]

I'm not sure if divergence among browsers is enough to prove that picking one of them will not cause issues for users of a particular browser. Ideally, to make a decision, we would have some more data about how often a case occurs (infrequent cases are more OK to change semantics) as we got for __defineGetter__. It would also be nice to do some analysis by searching through existing codebases to see how caller is used and examine whether any issues are apparent.

[bterlson]

@littledan which of the proposed semantics are you worried about? I guess the type error for accessing caller when caller is strict is most concerning. I doubt that non-simple parameter lists not supporting this is worrying from a compat perspective.

[allenwb]

The effect of f.caller when the caller of f is a strict mode function was specified in ES5.1: http://www.ecma-international.org/ecma-262/5.1/#sec-15.3.5.4

Note that the specified behavior was to throw a TypeError.

That was removed from the ES6 spec. after Mark Miller and I convinced ourselves that it was no longer necessary because of other ES6 spec. changes. But I don't remember the details right now. It is probably captured somewhere in bugs.ecmascript.org.

[domenic]

I vaguely recall us just hoping browsers would just leave that property off (f.hasOwnProperty("caller") === false).

It seems like nobody does that though, either defining a property with value null, or a throwing getter, if I am reading @claudepache's table right.

[bterlson]

I vaguely recall we had a different semantics prior to putting throwers on Function.prototype (and that the change came somewhat late). I wonder if making that change made it so we shoul dhave added the ES5.1 15.3.5.4 semantics back?

[allenwb]

It is covered in http://tc39.github.io/ecma262/#sec-forbidden-extensions

[allenwb]

The bigger question is what is the result of:

// the caller is a sloppy-mode function
function g() { 
    return f(0); 
};

function f(n) {
   var caller1 = f.caller;
   if (n==0) f(1);
   var caller2 = f.caller;
   if (n==0) console.log(caller1===caller2);
}

Does it log true or false? Presumably depends upon whether or not there is a single state slot in the function object. I think we talked about this at a TC39 meeting but nobody really want to put energy into fullyspecifying this highly deprecated "feature" so it didn't go into Annex B.

It probably isn't interoperable for cases like the above now. I suspect that no implementation would really want to waste time changing their implementation to make it inter-operable for such cases. What value comes from specifying it?

[WebReflection]

possibly no value, but that "quiz" is easy to solve. Recursion makes the
caller the function itself: least surprise.

The answer is false then, and since that's unlikely real-world code,
nobody gonna suffer from such answer.

It'd be worst/unreasonable practice, in my opinion, to ask twice for a
fn.caller, and in the same function body, if you're expecting the same
result.

Just my 2 cents

On Thu, May 12, 2016 at 12:11 AM, Allen Wirfs-Brock <
[email protected]> wrote:

The bigger question is what is the result of:

// the caller is a sloppy-mode functionfunction g() {
return f(0);
};
function f(n) {
var caller1 = f.caller;
if (n==0) f(1);
var caller2 = f.caller;
if (n==0) console.log(caller1===caller2);
}

Does it log true or false? Presumably depends upon whether or not there is
a single state slot in the function object. I think we talked about this at
a TC39 meeting but nobody really want to put energy into fullyspecifying
this highly deprecated "feature" so it didn't go into Annex B.

It probably isn't interoperable for cases like the above now. I suspect
that no implementation would really want to waste time changing their
implementation to make it inter-operable for such cases. What value comes
from specifying it?

—
You are receiving this because you are subscribed to this thread.
Reply to this email directly or view it on GitHub
https://github.com/tc39/ecma262/issues/562#issuecomment-218605762

[claudepache]

@allenwb Good point

The bigger question is what is the result of:

// the caller is a sloppy-mode function
function g() {
return f(0);
};

function f(n) {
var caller1 = f.caller;
if (n==0) f(1);
var caller2 = f.caller;
if (n==0) console.log(caller1===caller2);
}
Does it log true or false? Presumably depends upon whether or not there is a single state slot in the function object.

Good point. Fortunately, it logs true in all current mainstream browsers.

What value comes from specifying it?

It is useful to make sure that implementations does not do unadvisable things; and it may be easier or safer to achieve that by a simple specification.

[WebReflection]

if it's about setting it up at the beginning and dropping it at the end (or
restoring the previous) then true would be reasonable result, yet I don't
think it makes any sense to ask for a caller down the road, specially not
after a recursive call.

A non-issue to solve, probably not even needed to be specified?

On Thu, May 12, 2016 at 8:46 AM, Claude Pache [email protected]
wrote:

@allenwb https://github.com/allenwb Good point

The bigger question is what is the result of:

// the caller is a sloppy-mode function
function g() {
return f(0);
};

function f(n) {
var caller1 = f.caller;
if (n==0) f(1);
var caller2 = f.caller;
if (n==0) console.log(caller1===caller2);
}
Does it log true or false? Presumably depends upon whether or not there is
a single state slot in the function object.

Good point. Fortunately, it logs true in all current mainstream browsers.

What value comes from specifying it?

It is useful to make sure that implementations does not do unadvisable
things; and it may be easier or safer to achieve that by a simple
specification.

—
You are receiving this because you commented.
Reply to this email directly or view it on GitHub
https://github.com/tc39/ecma262/issues/562#issuecomment-218673734

[claudepache]

@bterlson

Function#arguments and Function#caller should be disabled for functions with non-simple parameter lists (ie. not have the own properties, so look up to throwers). Spidermonkey seems to do this now so we can probably get away with this too?

Are you sure? I just tested this in Firefox Nightly web console:

function f(x = 1) { return f.caller }
(function g(x = 1) { return f() })(); // returns: function g()

---

In case there is confusion about the absence of own properties: Firefox doesn't have own properties anymore on individual functions, but it doesn't mean that the functionality is gone. Instead, all logic has been displaced inside the Function.prototype.{caller,arguments} accessors.

[rossberg]

In V8, these properties have a purely "best effort" implementation. Whether they work, and with what specific semantics, depends on a variety of static and dynamic factors, like optimisation levels. IOW, there is not even a consistent "Chrome semantics".

Changing this would introduce significant overhead and complexity, in particular wrt Function#arguments.

We hence see zero -- or even negative -- value in elevating these (mis)features to the standard, even if it's just Annex B. We can serve the community better by spending our resources elsewhere.

[bterlson]

@claudepache I am not sure! Confirmed your example is correct. I wish I had the sample I was using before as js.exe was the only one throwing on it. Alas, it is missing. I also updated today so possibly it's a recent change. Anyway, I would still hope we could not do this.

@rossberg-chromium would you agree that there is some semantics here required to run the web? If so, that is what we should spec. If not, you (and all of us) should just remove this functionality. You can always choose when to fix bugs (or, not to fix them) :)

[rossberg]

@bterlson, not necessarily. They are probably used primarily for debugging and other diagnostics, rather than actual programmatic logic. In that case, a best-effort implementation is still useful, despite the reliable intersection semantics being practically empty.

[claudepache]

They are probably used primarily for debugging and other diagnostics, rather than actual programmatic logic.

In that case, they could probably be neutered (by returning null or a fake empty Argument object) or plainly removed, as they are already inoperative for strict-mode functions and implementations provide better diagnostic tools. Some volunteer to try that?

Otherwise, if they are bound to remain, I think that a minimal specification, allowing implementation-defined behaviour at some well-guarded places if desired, is useful. For example, here are two points that could be improved relatively to the current situation:

• Some implementations give unwarranted access to builtin functions through the .caller property. If we could limit leaks to sloppy-mode functions, it would be great.
• Some implementations use an own property for sloppy-mode functions but not for the other ones (relying on the inheritance from Function.prototype), and that may lead to confusions:

function B() {}
var C = (function() { 
    "use strict"
    return class C extends B {} 
})()
C.arguments // will return B.arguments ... oops

[rossberg]

They are probably used primarily for debugging and other diagnostics,
rather than actual programmatic logic.

In that case, they could probably be neutered (by returning null or a
fake empty Argument object) or plainly removed, as they are already
inoperative for strict-mode functions and implementations provide better
diagnostic tools. Some volunteer to try that?

Given the turmoil we are seeing around tail call elimination, we might not
(yet) get away with a regression like that.

At the same time, there is no good reason to encourage new code to use
these features. Nor for us to waste time on them. Any useful spec text will
cause both.

Otherwise, if they are bound to remain, I think that a minimal

specification, allowing implementation-defined behaviour at some
well-guarded places if desired, is useful. For example, here are two points
that could be improved relatively to the current situation:

-

Some implementations give unwarranted access to builtin functions
through the .caller property. If we could limit leaks to sloppy-mode
functions, it would be great.
-

Some implementations use an own property for sloppy-mode functions but
not for the other ones (relying on the inheritance from
Function.prototype), and that may lead to confusions:

function B() {}var C = (function() {
"use strict"
return class C extends B {}
})()C.arguments // will return B.arguments ... oops

Yeah, but there is nothing that could be done about this other than poison
pills -- which we just got rid of in ES6, and don't want back. Hence this
seems like exactly the kind of issue that the spec cannot fix anyway.

Why are you saying that access to built-in callers is unwarranted? Not
saying that they _should_ be accessible, but I don't see why they _must
not_ be either.

[allenwb]

On May 17, 2016 5:56 AM, Claude Pache [email protected] wrote:

Some implementations give unwarranted access to builtin functions through the .caller property. If we could limit leaks to sloppy-mode functions, it would be great.

This is a spec. violation if the built-in is implemented via a strict ES function

[rossberg]

On 17 May 2016 at 15:36, Allen Wirfs-Brock [email protected] wrote:

On May 17, 2016 5:56 AM, Claude Pache [email protected] wrote:

Some implementations give unwarranted access to builtin functions
through the .caller property. If we could limit leaks to sloppy-mode
functions, it would be great.

This is a spec. violation if the built-in is implemented via a strict ES
function

Allen, in what sense is "implemented via a strict ES function" a meaningful
characterisation within the spec? How would that be observable?

[claudepache]

Some implementations use an own property for sloppy-mode functions but
not for the other ones (relying on the inheritance from
Function.prototype), and that may lead to confusions:

function B() {}var C = (function() {
    "use strict"
    return class C extends B {}
})()C.arguments // will return B.arguments ... oops

Yeah, but there is nothing that could be done about this other than poison
pills -- which we just got rid of in ES6, and don't want back. Hence this
seems like exactly the kind of issue that the spec cannot fix anyway.

No, something can be done, and Firefox has done it: remove those own properties on every individual functions, including sloppy-mode ones, and define "arguments" and "caller" accessor properties on Function.prototype that take different action according to the received this value.

[zenparsing]

At the same time, there is no good reason to encourage new code to use
these features. Nor for us to waste time on them. Any useful spec text will
cause both.

Plus one's aren't very helpful, I know. But +1 all the same (particularly to the second point).

[claudepache]

At the same time, there is no good reason to encourage new code to use
these features. Nor for us to waste time on them. Any useful spec text will
cause both.

Plus one's aren't very helpful, I know. But +1 all the same (particularly to the second point).

Minus ones are nevertheless useful to point to actions that people don’t want to be taken.

I have updated the proposed spec in order to allow some implementation-defined behaviour, while keeping safety and soundness for non-sloppy functions. In particular, V8 is allowed to keep its nondeterministic semantics in order to discourage their use :-)

[allenwb]

On May 17, 2016 8:58 AM, rossberg-chromium [email protected] wrote:

On 17 May 2016 at 15:36, Allen Wirfs-Brock [email protected] wrote:

On May 17, 2016 5:56 AM, Claude Pache [email protected] wrote:

Allen, in what sense is "implemented via a strict ES function" a meaningful
characterisation within the spec? How would that be observable?

See https://tc39.github.io/ecma262/#sec-built-in-function-objects
If a built-in is implemented using a strict node ECMAScript function object then the clause 16.1 rules about caller apply.

[rossberg]

Allen, in what sense is "implemented via a strict ES function" a
meaningful
characterisation within the spec? How would that be observable?

See https://tc39.github.io/ecma262/#sec-built-in-function-objects
If a built-in is implemented using a strict node ECMAScript function
object then the clause 16.1 rules about caller apply.

I still don't understand how this is observable. An implementation can
always pretend that all its built-ins are exotic, regardless of their
actual implementation details. AFAICS, there is no way a program can tell
their "true nature".

[claudepache]

After reflection, I understand that putting this in Annex B may not be desirable.

However, there is still room for improvement w.r.t. the current situation, maybe by putting more constraints in Section 16.2 Forbidden Extensions. Concretely:

• forbid to leak anything else than sloppy-mode ECMAScript function (functions with an [[ECMAScriptCode]] internal slot and for which [[Strict]] is false);
• if an implementation choose to implement a given builtin using an ECMAScript function, it must be a strict-mode one.

And, in order to minimise API surface and avoid the issue of function objects inheriting from others, the following may be nice (implemented by Firefox):

• disallow to add caller and arguments own properties on individual function objects; instead, only corresponding deletable accessor properties on Function.prototype are allowed.

[rossberg]

I like the first two suggestions. I'm less thrilled about the latter, because that means that _all_ functions, including strict ones, will have these properties (even if they throw on some). That seems strictly worse than the own property approach, where they only show up on non-sloppy functions in some inheritance corner cases.

[claudepache]

I'm less thrilled about the latter, because that means that all functions, including strict ones, will have these properties (even if they throw on some).

This is already the case according to the current spec, because the AddRestrictedFunctionProperties() operation is applied to %FunctionPrototype%, see CreateIntrisics().

One could just kill AddRestrictedFunctionProperties() instead; but really, I don’t think that it is in any way better than the current inherit-from-sloppy-mode-function hazard.

[claudepache]

disallow to add caller and arguments own properties on individual function objects; instead, only corresponding deletable accessor properties on Function.prototype are allowed.

Alternatively, a getter might be installed on each sloppy-mode function, which checks its this-value and refuses to work when used as inherited. I don’t think it is better, but I don’t care much.

More importantly, currently some implementations violate the spec, as they define, on each sloppy-mode function, an arguments and a caller property, and make them as nonwritable and nonconfigurable; but yet their value does observably change over time (6.1.7.3).

[claudepache]

More importantly, currently some implementations violate the spec, as they define, on each sloppy-mode function, an arguments and a caller property, and make them as nonwritable and nonconfigurable; but yet their value does observably change over time (6.1.7.3).

Just opened:

• https://bugs.webkit.org/show_bug.cgi?id=158116
• https://bugs.chromium.org/p/v8/issues/detail?id=5047
• https://github.com/Microsoft/ChakraCore/issues/1048

[evilpie]

Ping, can we move this forward? Firefox has been shipping getters on Function.prototype without any problems. @claudepache @bterlson

[bterlson]

@evilpie sure, if it's web compatible I'm fine moving "caller" and "arguments" to proto getters.

I understand the desire to not specify actual machinery in Annex B and the biggest advantage of putting this text in Forbidden Extensions is that an implementation might one day remove these properties entirely.

I like @claudepache's 3 updates, but I wonder if the specification that built-in functions implemented in ECMAScript be strict mode functions should go in 9.3 Built-in Function Objects instead? Disallowing "arguments" and "caller" own properties and forbidding leaking of non-sloppy function state seem like fine 16.2 Forbidden Extensions additions. @evilpie thoughts? Want to write a (needs-consensus) PR?

[chicoxyzzy]

was arguments.caller removed only in Firefox Nightlies or it was removed from SpiderMonkey completely?

[evilpie]

@chicoxyzzy We completely removed arguments.caller in bug 1324208 and unless we see regressions in the wild (unlikely because it threw before), we will ship Firefox 53 (current Nightly) on 2017-04-18.

@bterlson Sorry, seems like I ignored your request. I will take a shot at documenting this.

[ljharb]

@evilpie any update?

[evilpie]

I am not working on this. Maybe @claudepache could refresh their old proposal. Firefox seems to have some more restrictions: https://searchfox.org/mozilla-central/rev/c43240cef5829b8a2dec118faff8a5e1fec6ae1b/js/src/vm/JSFunction.cpp#132-179.

We only allow FunctionDeclaration or FunctionExpression, which aren't async, generators etc. Also no methods/getters etc.

arguments.caller was completely removed, not even the poison pill remains.

[claudepache]

arguments.caller was completely removed, not even the poison pill remains.

(arguments.caller is out of the scope of this Issue, and is anyway dead, done and dusted per #689.)

[claudepache]

Firefox seems to have some more restrictions: https://searchfox.org/mozilla-central/rev/c43240cef5829b8a2dec118faff8a5e1fec6ae1b/js/src/vm/JSFunction.cpp#132-179.

We only allow FunctionDeclaration or FunctionExpression, which aren't async, generators etc. Also no methods/getters etc.

Good point. I've opened https://github.com/claudepache/es-legacy-function-reflection/issues/1.

[zoobot]

Is there a replacement for arguments.callee.name to get the function name from within the function in strict mode?

I want the function names to go into the log when it errors and I don't want to have to change my logger line every time I copy paste it to a new function.

Thanks

[claudepache]

@zoobot (new Error).stack will give the information you need for your purpose (although the format will differ among engines, as it is not standardised). — But this thread is not the proper place to discuss that issue; you may be interested in the Error Stacks proposal.

[zoobot]

Thanks @claudepache

I wish there was a way to just get the name from inside the function like arguments.callee.name did...

util = require('util');

function testNAME() {
  console.log(`arguments.callee.name: ${arguments.callee.name} \n`);

  console.log(`Object.getOwnPropertyDescriptor(new Error(), 'stack'): ${Object.getOwnPropertyDescriptor(new Error(), 'stack')}  \n`);

  console.log(`Object.getOwnPropertyDescriptor(new Error(), 'stack'): ${util.inspect(Object.getOwnPropertyDescriptor(new Error(), 'stack'), false, 10, true)} \n`);

  console.log(`Object.getOwnPropertyDescriptor(new Error(), 'stack'): ${util.inspect(Object.getOwnPropertyDescriptor(new Error(), 'stack'), false, 10, true)} \n`);

}

testNAME()

arguments.callee.name: testNAME

Object.getOwnPropertyDescriptor(new Error(), 'stack'): [object Object]

Object.getOwnPropertyDescriptor(new Error(), 'stack'): { value:
'Errorn at testNAME (/mnt/tb/TB-warehouse-automation/test5.js:7:118)n at Object. (/mnt/tb/TB-warehouse-automation/test5.js:14:1)n at Module._compile (internal/modules/cjs/loader.js:689:30)n at Object.Module._extensions..js (internal/modules/cjs/loader.js:700:10)n at Module.load (internal/modules/cjs/loader.js:599:32)n at tryModuleLoad (internal/modules/cjs/loader.js:538:12)n at Function.Module._load (internal/modules/cjs/loader.js:530:3)n at Function.Module.runMain (internal/modules/cjs/loader.js:742:12)n at startup (internal/bootstrap/node.js:266:19)n at bootstrapNodeJSCore (internal/bootstrap/node.js:596:3)',
writable: true,
enumerable: false,
configurable: true }

Object.getOwnPropertyDescriptor(new Error(), 'stack'): 'testNAME (/mnt/tb/TB-warehouse-automation/test5.js:9:118)n at Object. (/mnt/tb/TB-warehouse-automation/test5.js:14:1)n at Module._compile (internal/modules/cjs/loader.js:689:30)n at Object.Module._extensions..js (internal/modules/cjs/loader.js:700:10)n at Module.load (internal/modules/cjs/loader.js:599:32)n at tryModuleLoad (internal/modules/cjs/loader.js:538:12)n at Function.Module._load (internal/modules/cjs/loader.js:530:3)n at Function.Module.runMain (internal/modules/cjs/loader.js:742:12)n at startup (internal/bootstrap/node.js:266:19)n at bootstrapNodeJSCore (internal/bootstrap/node.js:596:3)'

[ljharb]

In that case it’s your own function, you already know the name.

[zoobot]

arguments.callee.name would be super useful if it was standard, as is arguments.caller.name for that matter, though I just learned about it.

I probably spend a lot of time of my life rewriting function names when I copy logs from one function to another.
I don't want to have to rewrite every log line after looking at the name.
Plus I am human and forget to change the name in the log so it slows down dev. I want dev to be faster.
I wish I could use arguments.callee.name or have a replacement for it.

This is way faster and less prone to typos/forgetfulness
logger.log('debug', arguments.callee.name ${util.inspect(opts, false, 10, true)});
than this
logger.log('debug', saveToOpts ${util.inspect(opts, false, 10, true)});
to get a function name in the log when you are copying and pasting that line all over the place all day every day.

[ljharb]

@zoobot this seems like what you want is a new proposal, for something like function.name - I'd suggest giving https://github.com/tc39/ecma262/blob/master/CONTRIBUTING.md#creating-a-new-proposal a shot.

I'm going to hide all these comments as off topic, if you don't mind :-)

[zoobot]

Thanks @ljharb I will try that creating a new proposal link. Function.name exists but I don't see the point of it because you have to already know the name of the function... Not a replacement for arguments.callee.name and arguments.caller.name. :/

If you leave these comments here, it will save time for whoever searches this subject after me.

[ljharb]

@zoobot to clarify, i mean literally function.name, a contextual metakeyword that would only work in a function, and would work in every function.

[jorendorff]

Is there anything we can do to help this work land?

We got a bug report about Function caller properties last month: https://bugzilla.mozilla.org/show_bug.cgi?id=1527810

Would love to see this standardized so implementations can converge.

[ljharb]

I believe we next need a PR, unless i missed one farther upthread.

[claudepache]

We got a bug report about Function caller properties last month: https://bugzilla.mozilla.org/show_bug.cgi?id=1527810

The relevant issue is: Given that the caller of f is strict, what should f.caller do. Here is a minimal testcase:

// "don't use strict"
function g() { "use strict"; return f() }
function f() { return f.caller; }
g();

Chrome and Safari return null. Firefox throws a TypeError (and that, since long ago: I've just tested FF17 released in 2012). Both behaviours are OK, although throwing a TypeError is subjectively strictly better in the sense that it is a better incitation for 🔥ing that from their code.

Whether Firefox should change behaviour depends, I think, on how hard it is needed for web compatibility.

[ljharb]

@claudepache what does edge do, and what did IE do?

[jorendorff]

Whether Firefox should change behaviour depends, I think, on how hard it is needed for web compatibility.

Every difference in behavior is a web compatibility _risk_, so there's some pressure to converge regardless of what TC39 does.

But standardizing things to improve web compatibility and the developer experience is TC39's mandate, right? By all means, please go ahead and do it. Since implementations currently differ, you can have your pick of behavior. Just don't leave this unspecified for our (Mozilla's) benefit. We'll implement the standard.

[claudepache]

@ljharb Both IE and Edge throw a TypeError.

[ljharb]

In that case, it seems like half the web does one thing, and half another, so we can pick what either pair of them do, as long as at least one of the other two are willing to change?

[erights]

Since we still have a choice, throwing the TypeError is much better. We should specify that.

[ljharb]

Would someone like to make a PR, reach out to the engines that will need to make a change, and write test262 tests?

[claudepache]

In fact, Safari does throw (like Firefox and Edge) when the caller property is about to reveal a strict-mode function: I've been tripped by PTC. A non-tail-call-sensitive test case is:

// "don't use strict"
function g() { "use strict"; var r =  f(); return r; }
function f() { return f.caller; }
g();

I’ve tested some other cases, see: https://github.com/claudepache/es-legacy-function-reflection/issues/1; from those results, I’ll amend my proposal.

[claudepache]

Hi,

I have completed the analysis of how browsers currently implement .caller and .arguments, and I have modified the proposed spec in a way that is both as near as possible to what implementations do, while being as secure and consistent as possible.

The good news is that implementations are remarkably consistent between each other, except for small — but sometimes important — details; so that they’ll need to do minimal changes.

@erights is intending to present the proposal at the next meeting.