Dietpi: Problem with PREP_SYSTEM_FOR_DIETPI.sh Failure
Required Information:
- DietPi Version | v.
- SBC Device | NULL (index=22)
- Distro | jessie (index=3)
- Command | G_AGDUG
- Error Handler | G_ERROR_HANDLER
Additional Information (if applicable):
- Software title | DietPi-PREP_SYSTEM_FOR_DIETPI
Expected behaviour:
packages shoukd be authenticated
Actual behaviour:
packages cannot be authenticated
Steps to reproduce:
Additional logs:
```
Log file contents:
libkrb5-3 libkrb5support0 libldap-2.4-2 liblocale-gettext-perl liblzma5
libmount1 libncurses5 libncursesw5 libnewt0.52 libnih-dbus1 libnih1
libopts25 libp11-kit0 libpam-modules libpam-modules-bin libpam-runtime
libpam0g libparted2 libpcre3 libpopt0 librtmp1 libsasl2-2
libsasl2-modules-db libselinux1 libsemanage-common libsemanage1 libsepol1
libslang2 libsmartcols1 libss2 libssh2-1 libstdc++6 libsystemd0 libtasn1-6
libtext-charwidth-perl libtext-wrapi18n-perl libtinfo5 libudev1 libusb-0.1-4
libusb-1.0-0 libustr-1.0-1 libuuid1 locales login lsb-base mawk mount
multiarch-support nano ncurses-base ncurses-bin net-tools netbase ntfs-3g
ntp openssl parted passwd perl-base plymouth procps psmisc readline-common
sed sensible-utils startpar sudo systemd systemd-sysv sysv-rc sysvinit-utils
tar tzdata udev unzip usbutils util-linux wget whiptail xkb-data xz-utils
zlib1g
169 upgraded, 37 newly installed, 2 to remove and 0 not upgraded.
Need to get 59.7 MB of archives.
After this operation, 21.2 MB of additional disk space will be used.
WARNING: The following packages cannot be authenticated!
locales libc-l10n libdbus-1-3 libnih-dbus1 libnih1 libc6 libc-bin debconf
libgpg-error0 libgcrypt20 liblz4-1 libapparmor1 libip4tc0 libpcre3
libselinux1 libmount1 libseccomp2 libsmartcols1 libtinfo5 libncurses5
libncursesw5 base-files sensible-utils debianutils bash libfdisk1
bash-completion util-linux init-system-helpers sysvinit-utils startpar
insserv sysv-rc initscripts mount kbd coreutils console-setup-linux
libtext-charwidth-perl perl-base liblocale-gettext-perl e2fslibs e2fsprogs
klibc-utils initramfs-tools console-setup keyboard-configuration libklibc
cpio libudev1 libsystemd0 hdparm systemd-sysv udev systemd kmod libkmod2
gcc-6-base libgcc1 libattr1 acl libacl1 libaudit-common libcap-ng0 libaudit1
libpam0g libsepol1 libsemanage-common libsemanage1 bzip2 libbz2-1.0
libustr-1.0-1 libpam-modules-bin libpam-modules passwd adduser libprocps6
procps initramfs-tools-core linux-base xkb-data lsb-base libcap2
libdevmapper1.02.1 dmsetup libuuid1 libcryptsetup4 libidn11 liblzma5
libblkid1 init bsdutils tar libpam-runtime cron dpkg dash diffutils
findutils install-info grep gzip hostname login ncurses-bin sed libstdc++6
zlib1g libapt-inst2.0 apt-utils libapt-pkg5.0 apt libdb5.3 gpgv
libdebconfclient0 base-passwd ncurses-base mawk libgmp10 libnettle6
libhogweed4 libffi6 libp11-kit0 libtasn1-6 libgnutls30 libntfs-3g871 ntfs-3g
netbase libbsd0 libedit2 libopts25 libssl1.1 ntp libassuan0 pinentry-curses
libnpth0 readline-common libreadline7 gnupg-agent libksba8 libsqlite3-0
gnupg libslang2 libcomerr2 libss2 multiarch-support tzdata libusb-0.1-4
libelf1 libmnl0 iproute2 iputils-ping libisc-export160 libssl1.0.2
libdns-export162 isc-dhcp-client isc-dhcp-common libnewt0.52 libpopt0 nano
libunistring0 libidn2-0 libpsl5 wget whiptail libgnutls-openssl27
libkeyutils1 libgssapi-krb5-2 libkrb5-3 libk5crypto3 libkrb5support0
libsasl2-modules-db libsasl2-2 libldap-common libldap-2.4-2 xz-utils
libnghttp2-14 librtmp1 libssh2-1 libcurl3-gnutls apt-transport-https openssl
ca-certificates curl libcurl3 dc dosfstools dphys-swapfile fbset fuse
libfuse2 libcap2-bin libdrm2 parted libparted2 plymouth libpng16-16
libplymouth4 libtext-wrapi18n-perl libusb-1.0-0 net-tools psmisc sudo unzip
usbutils fake-hwclock
E: There are problems and -y was used without --force-yes
Elluminatus
All 19 comments
@Elluminatus
Thank you for your report.
We define the --force-yes (on Stretch+ --allow-unauthenticated and others) options but do not apply them within G_AGDUG function. Might be due to possible issues of applying all of them, as they are a bid dangerous, or we just forgot it: https://github.com/Fourdee/DietPi/blob/master/dietpi/func/dietpi-globals#L1438-L1463
Please try the following, from within directory where you downloaded PREP_SYSTEM_FOR_DIETPI.sh to:
sed -i 's/G_AGDUG/apt-get dist-upgrade --force-yes/g' PREP_SYSTEM_FOR_DIETPI.sh
Then rerun the script.
Note that running the preparation on generic devices is experimental as it is hard to predict exact outcome dependant on initial system. Might I ask which device/os-image you are running the script on?
@Fourdee
Is the missing $options wanted or just forgot to add 😉?
Do you know, what is necessary for authenticating packages? debian-archive-keyring, gnupg and now dirmngr is installed before G_AGDUG, maybe the new keys need to be somehow activated/added?
Ref.: https://wiki.debian.org/SecureApt
But maybe it is just a temporary issue, I just found many search results for different distros, where this error showed up for some hours, but then disappeared again.
MichaIng
on 8 Mar 2018
@MichaIng
Is the missing $options wanted or just forgot to add 😉?
Probably forgot 😃. I'll add it back in.
Fourdee
on 8 Mar 2018
@Elluminatus
Which device are you running, and, which Debian pre-image was used?
Fourdee
on 8 Mar 2018
@MichaIng
Do you know, what is necessary for authenticating packages? debian-archive-keyring, gnupg and now dirmngr is installed before G_AGDUG
Those should cover it I believe for stock debian repo. Additional added repos must have key installed, where available.
Fourdee
on 8 Mar 2018
@Fourdee just a lil hint upon version numbering: Just use something like 6.3.1 for low updates and 6.x for higher and better fixes and updates! ;)
If you'll just use more than 6.x updates, i'll guess we'll see 7.x by June'18 :octopus:
ghost
on 9 Mar 2018
Debian Buster may be a solution..... as myself if i use "Buster" upon Stretch with "Prep", i have no problmes so far..... is it only myself?
ghost
on 9 Mar 2018
@SuBLiNeR @Fourdee
Just use something like 6.3.1 for low updates
I thought about the same, doing some subsub versioning for hotfix updates. But as it does not affect function, I would keep this with low priority in mind 😉.
Debian Buster may be a solution
Distro upgrades always bear the risk of errors, I guess the APT package and system dependencies are just too complex to totally avoid. --force-yes (on Jessie) respectively --allow-unauthenticated (Stretch and afterwards) will do the job here.
Debian Buster generally works fine, I run a VM here since longer without any issues. Raspbian Buster on the other hand had often package updates with missing dependencies, leading in worst case to the removal of a large bunch of dependant packages, if you force apt (full-)upgrade. Read my status report: https://github.com/Fourdee/DietPi/issues/1286#issuecomment-366984565
Both have in common a still high rate of package updates. Nearly every day I can apt upgrade my Buster systems, even that the amount of installed packages is even lower than on regular DietPi and therefore way lower than on regular Debian/Raspbian. If you wait for 2 weeks, than the high amount of updates is already risky on it's own (same as distro upgrades), thus I would so for definitely not recommend Buster for end users.
MichaIng
on 10 Mar 2018
Hi I am using a banana pi m3 with a raspbian jessie using kernel BPI-M3 kernel 3.4
See here: http://forum.banana-pi.org/t/bpi-m3-new-image-raspbian-jessie-bpi-m3-img-2016-07-13/2009
Hope this might help?
Elluminatus
on 17 Mar 2018
1st) Okay i tried it again. Now it seems like the whole process is runing through. But when i try to reboot after the system told me to do, the system restarts and I can see 4 failures in red passing by, but to fast to read. The last entry is rebboting, the system reboots a 2nd time,and... the system is not starting. The heartbeat led is blinking 3 to 4 times and the banana pi logo shows up, but then nothing else happens... This was the attemp to go from jessie to stretch.
2nd) Okay tried it again with jessie as my choice. Same problem...
3rd) Tried it know with this image: http://forum.banana-pi.org/t/bpi-m3-new-image-raspbian-lite-bpi-m3-img-2016-07-12/2001 same issue (tried to convert to dietpi (jessie))
Elluminatus
on 17 Mar 2018
@Elluminatus
the system restarts and I can see 4 failures in red passing by, but to fast to read.
Without a the output of serial port while boot up (or not) you will never will get closer to the issue.
http://linux-sunxi.org/Sinovoip_Banana_Pi_M3#Adding_a_serial_port
k-plan
on 18 Mar 2018
Hi thank you for the hint. I found a usb to uart adapter and monitored the output: See here:
`
Booting kernel from Legacy Image at 48000000 ...
Image Name: Linux-3.4.39-BPI-M3-Kernel
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 5717288 Bytes = 5.5 MiB
Load Address: 40008000
Entry Point: 40008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
[ 7.107]
Starting kernel ...
Start: 0x40000000
Size: 2048MB
ion_carveout reserve: 96m 128m
ion_reserve_common: ion reserve: [0xb8000000, 0xc0000000]!
ion_cma reserve: 120m 176m 512m
ion_reserve_common: ion reserve: [0xa0000000, 0xc0000000]!
------sun8i_smp_init_ops----37-----
[ 0.000000] Booting Linux on physical CPU 0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.4.39-BPI-M3-Kernel (root@8ac3451c5c3b) (gcc version 4.6.3 20120201 (prerelease) (crosstool-NG linaro-1.13.1-2012.02-20120222 - Linaro GCC 2012.02) ) #1 SMP PREEMPT Tue May 3 13:47:01 UTC 2016
[ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: sun8i
[ 0.000000] cma: CMA: reserved 512 MiB at a0000000
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] On node 0 totalpages: 524288
[ 0.000000] free_area_init_node: node 0, pgdat c0c7c540, node_mem_map c0d2f000
[ 0.000000] Normal zone: 1404 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 158340 pages, LIFO batch:31
[ 0.000000] HighMem zone: 3204 pages used for memmap
[ 0.000000] HighMem zone: 361340 pages, LIFO batch:31
[ 0.000000] script_init enter!
[ 0.000000] script_init exit!
[ 0.000000] [mcpm_smp_init_cpus] ncores=8
[ 0.000000] PERCPU: Embedded 8 pages/cpu @c1f53000 s11776 r8192 d12800 u32768
[ 0.000000] pcpu-alloc: s11776 r8192 d12800 u32768 alloc=84096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519680
[ 0.000000] Kernel command line: enforcing=1 console=ttyS0,115200 console=tty1 board=bpi-m3 root=/dev/mmcblk0p2 rootwait init=/init vmalloc=384M ion_cma_list="120m,176m,512m" loglevel=8 bootmenutimeout=10 datadev=mmcblk0p2
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>[ 0.000000] allocated 4194304 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Memory: 2048MB = 2048MB total
[ 0.000000] Memory: 1535508k/1535508k available, 561644k reserved, 933888K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xe7800000 - 0xff000000 ( 376 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xe7000000 ( 624 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0ae0dd0 (11108 kB)
[ 0.000000] .init : 0xc0ae1000 - 0xc0b39e00 ( 356 kB)
[ 0.000000] .data : 0xc0b3a000 - 0xc0c93a50 (1383 kB)
[ 0.000000] .bss : 0xc0c93a74 - 0xc0d2e258 ( 618 kB)
[ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:544
[ 0.000000] Architected local timer running at 24.00MHz.
[ 0.000000] Switching to timer-based delay loop
[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] console [tty1] enabled
[ 0.001352] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.00 BogoMIPS (lpj=24000000)
[ 0.001425] pid_max: default: 32768 minimum: 301
[ 0.001758] Mount-cache hash table entries: 512
[ 0.003114] Initializing cgroup subsys cpuacct
[ 0.003158] Initializing cgroup subsys memory
[ 0.003230] Initializing cgroup subsys devices
[ 0.003264] Initializing cgroup subsys freezer
[ 0.003296] Initializing cgroup subsys blkio
[ 0.003347] Initializing cgroup subsys perf_event
[ 0.003445] CPU: Testing write buffer coherency: ok
[ 0.003535] ftrace: allocating 27619 entries in 81 pages
[ 0.040296] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.040381] Setting up static identity map for 0x4076b5a8 - 0x4076b600
[ 0.010000] CPU1: Booted secondary processor
[ 0.010000] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.010000] CPU2: Booted secondary processor
[ 0.010000] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.010000] CPU3: Booted secondary processor
[ 0.010000] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.260089] CPU4: failed to boot: -22
[ 0.300067] CPU5: failed to boot: -22
[ 0.340070] CPU6: failed to boot: -22
[ 0.380092] CPU7: failed to boot: -22
[ 0.380309] Brought up 4 CPUs
[ 0.380334] SMP: Total of 4 processors activated (19200.00 BogoMIPS).
[ 0.380910] devtmpfs: initialized
[ 0.390047] pinctrl core: initialized pinctrl subsystem
[ 0.411117] NET: Registered protocol family 16
[ 0.433810] DMA: preallocated 2048 KiB pool for atomic coherent allocations
[ 0.433933] script_sysfs_init success
[ 0.433985] sunxi_dump_init success
[ 0.435152] gpiochip_add: registered GPIOs 0 to 383 on device: sunxi-pinctrl
[ 0.436983] sunxi-pinctrl sunxi-pinctrl: initialized sunXi PIO driver
[ 0.437451] gpiochip_add: registered GPIOs 1024 to 1031 on device: axp-pinctrl
[ 0.438704] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.438748] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.440338] script config pll_video1 to 297 Mhz
[ 0.440375] script config pll_ve to 432 Mhz
[ 0.440399] Not Found clk pll_periph in script
[ 0.440428] script config pll_gpu to 432 Mhz
[ 0.440456] script config pll_hsic to 480 Mhz
[ 0.440484] script config pll_de to 504 Mhz
[ 0.440506] sunxi_default_clk_init
[ 0.440526] try to set pll6ahb1 to 200000000
[ 0.440588] try to set ahb clk source to pll6ahb1
[ 0.440614] set ahb clk source to pll6ahb1
[ 0.440639] try to set ahb1 to 200000000
[ 0.440664] try to set apb1 to 100000000
[ 0.441620] ===fe3o4==== sunxi_root_procfs_attach ret:0
[ 0.451208] bio: create slab
[ 0.451208] [ARISC] :sunxi-arisc driver v1.70
[ 0.463281] [ARISC] :arisc version: [v0.1.25.3]
[ 0.463771] sunxi_get_soc_bin: slow chip
[ 0.464218] [ARISC] :sunxi-arisc driver v1.70 startup succeeded
[ 0.010000] CPU4: Booted secondary processor
[ 0.010000] CPU4: thread -1, cpu 0, socket 1, mpidr 80000100
[ 0.010000] CPU5: Booted secondary processor
[ 0.010000] CPU5: thread -1, cpu 1, socket 1, mpidr 80000101
[ 0.010000] CPU6: Booted secondary processor
[ 0.010000] CPU6: thread -1, cpu 2, socket 1, mpidr 80000102
[ 0.010000] CPU7: Booted secondary processor
[ 0.010000] CPU7: thread -1, cpu 3, socket 1, mpidr 80000103
[ 0.491430] SCSI subsystem initialized
[ 0.491430] libata version 3.00 loaded.
[ 0.491430] usbcore: registered new interface driver usbfs
[ 0.491430] usbcore: registered new interface driver hub
[ 0.491430] usbcore: registered new device driver usb
[ 0.491430] twi_chan_cfg()335 - [twi0] has no twi_regulator.
[ 0.491430] twi_chan_cfg()335 - [twi1] has no twi_regulator.
[ 0.491430] twi_chan_cfg()335 - [twi2] has no twi_regulator.
[ 0.491703] Linux video capture interface: v2.00
[ 0.500621] BPI-M3: tmp [00]
[ 0.500621] BPI-M3: set PMIC AC 4000mA
[ 0.500621] BPI-M3: set PMIC AC 4000mA
[ 0.510406] Advanced Linux Sound Architecture Driver Version 1.0.25.
[ 0.511070] Bluetooth: Core ver 2.16
[ 0.511135] NET: Registered protocol family 31
[ 0.511162] Bluetooth: HCI device and connection manager initialized
[ 0.511194] Bluetooth: HCI socket layer initialized
[ 0.511221] Bluetooth: L2CAP socket layer initialized
[ 0.511267] Bluetooth: SCO socket layer initialized
[ 0.511554] cfg80211: Calling CRDA to update world regulatory domain
[ 0.511642] Switching to clocksource arch_sys_counter
[ 0.537844] FS-Cache: Loaded
[ 0.538194] CacheFiles: Loaded
[ 0.549911] axp81x_dcdc1: Failed to create debugfs directory
[ 0.551181] NET: Registered protocol family 2
[ 0.551574] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.552354] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.554848] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
[ 0.556431] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.556462] TCP: reno registered
[ 0.556488] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.556555] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.557009] NET: Registered protocol family 1
[ 0.557459] RPC: Registered named UNIX socket transport module.
[ 0.557492] RPC: Registered udp transport module.
[ 0.557516] RPC: Registered tcp transport module.
[ 0.557539] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.558283] hw perfevents: enabled with ARMv7 Cortex_A7 PMU driver, 5 counters available
[ 0.558472] [pm]aw_pm_init!
[ 0.558498] standby_mode = 1.
[ 0.558518] wakeup src cnt is : 2.
[ 0.558546] pmu name: pmu1_para .
[ 0.558572] pmu1_enable = 0x1.
[ 0.558593] pmux_id = 0x7.
[ 0.558615] pmu name: pmu2_para .
[ 0.558637] config_pmux_para: script_parser_fetch err.
[ 0.558661] pmu2_enable = 0x0.
[ 0.559086] add_sys_pwr_dm: axp81x_aldo2 ldo already alwayson.
[ 0.559271] add_sys_pwr_dm: axp81x_aldo2 ldo already alwayson.
[ 0.559311] add_sys_pwr_dm: axp81x_aldo2 ldo already alwayson.
[ 0.559403] after inited: sys_mask config = 0xebd5.
[ 0.559430] dynamic_standby enalbe = 0x0.
[ 0.559486] sunxi_reg_init enter
[ 0.559815] lock super standby for a83!
[ 0.559849] lookup_scene_lock_name: new scene lock super_standby
[ 0.559877] scene_lock_init name=super_standby
[ 0.559903] scene_lock: super_standby, type 5, count 1
[ 0.561911] highmem bounce pool size: 64 pages
[ 0.569808] VFS: Disk quotas dquot_6.5.2
[ 0.570248] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.572425] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.572993] NFS: Registering the id_resolver key type
[ 0.573784] Installing knfsd (copyright (C) 1996 [email protected]).
[ 0.575065] NTFS driver 2.1.30 [Flags: R/W].
[ 0.575508] fuse init (API version 7.18)
[ 0.576647] ceph: loaded (mds proto 32)
[ 0.576698] msgmni has been set to 1175
[ 0.584876] alg: No test for stdrng (krng)
[ 0.668202] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.668264] io scheduler noop registered
[ 0.668288] io scheduler deadline registered
[ 0.668483] io scheduler cfq registered (default)
[ 0.668957] pwm module init!
[ 0.669581] [DISP]disp_module_init
[ 0.703424] [DISP] Fb_map_kernel_logo,line:895:Fb_map_kernel_logo failed!
[ 0.718713] Console: switching to colour frame buffer device 160x45
[ 0.734878] [DISP]disp_module_init finish
[ 0.810300] uart0: ttyS0 at MMIO 0x1c28000 (irq = 32) is a SUNXI
[ 0.810506] sw_uart_pm()890 - uart0 clk is already enable
[ 0.810672] sw_console_setup()1233 - console setup baud 115200 parity n bits 8, flow n
[ 1.003313] console [ttyS0] enabled
[ 1.309297] axp81x_dcdc1: Failed to create debugfs directory
[ 1.469723] uart1: ttyS1 at MMIO 0x1c28400 (irq = 33) is a SUNXI
[ 1.470077] axp81x_dcdc1: Failed to create debugfs directory
[ 1.470194] uart2: ttyS2 at MMIO 0x1c28800 (irq = 34) is a SUNXI
[ 1.470919] [drm] Initialized drm 1.1.0 20060810
[ 1.480487] brd: module loaded
[ 1.484841] loop: module loaded
[ 1.944625] scene_lock_init name=rf_pm
[ 2.140162] Loading iSCSI transport class v2.0-870.
[ 2.140849] iscsi: registered transport (tcp)
[ 2.141600] boards_num modalias max_spd_hz bus_num cs mode
[ 2.141630] 0 spidev 33000000 0 0 3
[ 2.142245] axp81x_dcdc1: Failed to create debugfs directory
[ 2.142648] spi spi0: master is unqueued, this is deprecated
[ 2.143153] allwinners SoC SPI Driver loaded for Bus SPI-0 with 1 Slaves at most
[ 2.145424] usbcore: registered new interface driver qf9700
[ 2.145551] usbcore: registered new interface driver smsc95xx
[ 2.145632] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.165787] sunxi-ehci sunxi-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.165840] sunxi-ehci sunxi-ehci.1: new USB bus registered, assigned bus number 1
[ 2.260846] sunxi-ehci sunxi-ehci.1: irq 104, io mem 0xf1c1a000
[ 2.690091] sunxi-ehci sunxi-ehci.1: USB 0.0 started, EHCI 1.00
[ 2.690280] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.690301] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.690320] usb usb1: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.690339] usb usb1: Manufacturer: Linux 3.4.39-BPI-M3-Kernel ehci_hcd
[ 2.690356] usb usb1: SerialNumber: sunxi-ehci
[ 2.691262] hub 1-0:1.0: USB hub found
[ 2.691303] hub 1-0:1.0: 1 port detected
[ 2.691983] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.712146] sunxi-ohci sunxi-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
[ 2.712195] sunxi-ohci sunxi-ohci.1: new USB bus registered, assigned bus number 2
[ 2.712259] sunxi-ohci sunxi-ohci.1: irq 105, io mem 0xf1c1a400
[ 2.754225] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.754246] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.754265] usb usb2: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver
[ 2.754283] usb usb2: Manufacturer: Linux 3.4.39-BPI-M3-Kernel ohci_hcd
[ 2.754300] usb usb2: SerialNumber: sunxi-ohci
[ 2.755116] hub 2-0:1.0: USB hub found
[ 2.755152] hub 2-0:1.0: 1 port detected
[ 2.755797] Initializing USB Mass Storage driver...
[ 2.756005] usbcore: registered new interface driver usb-storage
[ 2.756021] USB Mass Storage support registered.
[ 2.756123] usbcore: registered new interface driver ums-alauda
[ 2.756207] usbcore: registered new interface driver ums-cypress
[ 2.756287] usbcore: registered new interface driver ums-datafab
[ 2.756365] usbcore: registered new interface driver ums_eneub6250
[ 2.756443] usbcore: registered new interface driver ums-freecom
[ 2.756522] usbcore: registered new interface driver ums-isd200
[ 2.756600] usbcore: registered new interface driver ums-jumpshot
[ 2.756678] usbcore: registered new interface driver ums-karma
[ 2.756758] usbcore: registered new interface driver ums-onetouch
[ 2.756862] usbcore: registered new interface driver ums-realtek
[ 2.756958] usbcore: registered new interface driver ums-sddr09
[ 2.757041] usbcore: registered new interface driver ums-sddr55
[ 2.757120] usbcore: registered new interface driver ums-usbat
[ 2.757330] usbcore: registered new interface driver usbserial
[ 2.757429] usbcore: registered new interface driver usbserial_generic
[ 2.757501] USB Serial support registered for generic
[ 2.757527] usbserial: USB Serial Driver core
[ 2.758014] file system registered
[ 2.760946] android_usb gadget: Mass Storage Function, version: 2009/09/11
[ 2.760966] android_usb gadget: Number of LUNs=3
[ 2.760984] lun0: LUN: removable file: (no medium)
[ 2.761000] lun1: LUN: removable file: (no medium)
[ 2.761016] lun2: LUN: removable file: (no medium)
[ 2.761617] android_usb gadget: android_usb ready
[ 2.863528] axp81x_dcdc1: Failed to create debugfs directory
[ 3.010161] usb 1-1: new high-speed USB device number 2 using sunxi-ehci
[ 3.158815] sunxi_hcd_host0 sunxi_hcd_host0: sunxi_hcd host driver
[ 3.190847] usb 1-1: New USB device found, idVendor=1a40, idProduct=0101
[ 3.190860] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 3.190872] usb 1-1: Product: USB 2.0 Hub
[ 3.191629] hub 1-1:1.0: USB hub found
[ 3.191844] hub 1-1:1.0: 4 ports detected
[ 3.316460] sunxi_hcd_host0 sunxi_hcd_host0: new USB bus registered, assigned bus number 3
[ 3.466950] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.470272] usb 1-1.1: new high-speed USB device number 3 using sunxi-ehci
[ 3.585943] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.588346] usb 1-1.1: New USB device found, idVendor=05e3, idProduct=0718
[ 3.588359] usb 1-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=2
[ 3.588371] usb 1-1.1: Product: USB Storage
[ 3.588380] usb 1-1.1: SerialNumber: 000000000033
[ 3.646457] usb usb3: Product: sunxi_hcd host driver
[ 3.655330] usb usb3: Manufacturer: Linux 3.4.39-BPI-M3-Kernel sunxi_hcd-hcd
[ 3.666568] usb usb3: SerialNumber: sunxi_hcd_host0
[ 3.675779] scsi0 : usb-storage 1-1.1:1.0
[ 3.676195] hub 3-0:1.0: USB hub found
[ 3.676221] hub 3-0:1.0: 1 port detected
[ 3.677301] mousedev: PS/2 mouse device common for all mice
[ 3.677673] sunxikbd_script_init: key para not found, used default para.
[ 3.678533] sunxi_rtc_init(796): sunxi rtc device register!
[ 3.678647] keyname:ctp_para subname:ctp_power_io ,get error!
[ 3.679300] rtc_gettime(333): read time 1970-1-1 1:0:15
[ 3.679485] get sysconfig para erro!
[ 3.679530] get sysconfig para erro!
[ 3.679568] get sysconfig para erro!
[ 3.679588] get sysconfig para erro!
[ 3.679654] ctp_wakeup: !!!!gpio data 1
[ 3.679691] alarm_gettime(470): get alarm time 1970-1-1 1:0:0 success!
[ 3.680227] rtc_gettime(333): read time 1970-1-1 1:0:15
[ 3.680478] rtc0 rtc0: rtc core: registered rtc0 as rtc0
[ 3.680728] sunxi_rtc_probe(756)!
[ 3.680810] i2c /dev entries driver
[ 3.681523] IR RC5(x) protocol handler initialized
[ 3.681707] sunxi cedar version 0.1
[ 3.682088] Driver for 1-wire Dallas network protocol.
[ 3.688327] Bluetooth: HCI UART driver ver 2.2
[ 3.688339] Bluetooth: HCI H4 protocol initialized
[ 3.688348] Bluetooth: HCI BCSP protocol initialized
[ 3.688357] Bluetooth: HCI Realtek H5 protocol initialized
[ 3.688986] sunxi_get_soc_bin: slow chip
[ 3.780046] get_device_para_value:get subname:icn83xx_ts error! val.val:0
[ 3.780053] get_detect_list: script_get_item err.support_number = 11.
[ 3.780061] get_device_para_value:get subname:gt818_ts error! val.val:0
[ 3.780067] get_detect_list: script_get_item err.support_number = 8.
[ 3.780073] get_device_para_value:get subname:tu_ts error! val.val:0
[ 3.780078] get_detect_list: script_get_item err.support_number = 7.
[ 3.780085] get_device_para_value:get subname:gt9xxf_ts error! val.val:0
[ 3.780090] get_detect_list: script_get_item err.support_number = 6.
[ 3.780098] get_device_para_value:get subname:gslX680new error! val.val:0
[ 3.780104] get_detect_list: script_get_item err.support_number = 3.
[ 3.780143] sw_get_write_info:open error ....IS(filp):1
[ 3.780159] sw_set_write_info:open error ....IS(filp):1
[ 3.780163] get write info erro!
[ 3.780345] sunxi_i2c_do_xfer()945 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x38)
[ 3.800182] sunxi_i2c_do_xfer()945 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x38)
[ 3.820331] sunxi_i2c_do_xfer()945 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x38)
[ 3.840245] sunxi_i2c_do_xfer()945 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x38)
[ 3.860246] sunxi_i2c_do_xfer()945 - [i2c0] incomplete xfer (status: 0x20, dev addr: 0x38)
[ 3.920265] usb 1-1.2: new low-speed USB device number 4 using sunxi-ehci
[ 4.175601]
[ 4.178910] *****Try sd *****
[ 4.225821] usb 1-1.2: New USB device found, idVendor=1c4f, idProduct=0002
[ 4.225828] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.225835] usb 1-1.2: Product: USB Keyboard
[ 4.225841] usb 1-1.2: Manufacturer: SIGMACHIP
[ 4.248689] mmc0: new high speed SDHC card at address aaaa
[ 4.249006] mmcblk0: mmc0:aaaa SB16G 14.8 GiB
[ 4.251504] mmcblk0: p1 p2
[ 4.252056] *****sd init ok*****
[ 4.486061] *****Try sdio*****
[ 4.489368] *****Try sd *****
[ 4.492683] *****Try mmc*****
[ 4.564283] mmc1: new high speed DDR MMC card at address 0001
[ 4.564605] mmcblk1: mmc1:0001 8WPD3R 7.28 GiB
[ 4.564737] mmcblk1boot0: mmc1:0001 8WPD3R partition 1 4.00 MiB
[ 4.564867] mmcblk1boot1: mmc1:0001 8WPD3R partition 2 4.00 MiB
[ 4.565948] mmcblk1: p1 p2
[ 4.569107] mmcblk1boot1: unknown partition table
[ 4.570860] mmcblk1boot0: unknown partition table
[ 4.571064] *****mmc init ok ******
[ 4.642099] no red_led, ignore it!
[ 4.759193] Registered led device: green_led
[ 4.814034] scsi 0:0:0:0: Direct-Access WDC WD32 00BEVT-63ZCT0 0016 PQ: 0 ANSI: 4
[ 4.815709] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.816233] sd 0:0:0:0: [sda] 625142444 512-byte logical blocks: (320 GB/298 GiB)
[ 4.817224] sd 0:0:0:0: [sda] Write Protect is off
[ 4.817232] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00
[ 4.818223] sd 0:0:0:0: [sda] No Caching mode page present
[ 4.818230] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 4.820973] sd 0:0:0:0: [sda] No Caching mode page present
[ 4.820979] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 4.873207] Registered led device: blue_led
[ 4.993820] Registered led device: sunxi_respiration_lamp
[ 5.041271] generic-usb 0003:1C4F:0002.0001: input,hidraw0: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-sunxi-ehci-1.2/input0
[ 5.060721] generic-usb 0003:1C4F:0002.0002: input,hidraw1: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-sunxi-ehci-1.2/input1
[ 5.076359] usbcore: registered new interface driver usbhid
[ 5.084685] usbhid: USB HID core driver
[ 5.091649] ac100_probe,line:2917
[ 5.114887] asoc: ac100-aif1 <-> pri_dai mapping ok
[ 5.122896] asoc: ac100-aif2 <-> bb-voice-dai mapping ok
[ 5.131027] ------------audio_hmic_irq----------
[ 5.140776] asoc: ac100-aif1 <-> sec_dai mapping ok
[ 5.151122] asoc: ac100-aif3 <-> bb-voice-dai mapping ok
[ 5.159531] asoc: ac100-aif2 <-> bb-voice-dai mapping ok
[ 5.169607] sda: sda1
[ 5.177033] asoc: sndhdmi <-> sunxi-hdmiaudio.0 mapping ok
[ 5.186663] IPv4 over IPv4 tunneling driver
[ 5.194251] sd 0:0:0:0: [sda] No Caching mode page present
[ 5.194355] TCP: cubic registered
[ 5.194361] Initializing XFRM netlink socket
[ 5.194813] NET: Registered protocol family 10
[ 5.195615] IPv6 over IPv4 tunneling driver
[ 5.196055] NET: Registered protocol family 17
[ 5.196085] NET: Registered protocol family 15
[ 5.196292] Bluetooth: RFCOMM TTY layer initialized
[ 5.196332] Bluetooth: RFCOMM socket layer initialized
[ 5.196338] Bluetooth: RFCOMM ver 1.11
[ 5.196345] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 5.196350] Bluetooth: BNEP filters: protocol multicast
[ 5.196358] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 5.196485] lib80211: common routines for IEEE802.11 drivers
[ 5.196493] lib80211_crypt: registered algorithm 'NULL'
[ 5.196628] Registering the dns_resolver key type
[ 5.196699] libceph: loaded (mon/osd proto 15/24, osdmap 5/6 5/6)
[ 5.325186] VFP support v0.3:
[ 5.325194] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 5.325205] sd 0:0:0:0: [sda] Attached SCSI disk
[ 5.346933] implementor 41 architecture 2 part 30 variant 7 rev 5
[ 5.355905] ThumbEE CPU extension supported.
[ 5.362858] Registering SWP/SWPB emulation handler
[ 5.370420] sunxi_bootup_extend_init: bootup extend disable(default)
[ 5.380586] cmdline,disp=
[ 5.385799] [HDMI] power vcc-hdmi-18
[ 5.393246] rtc_gettime(333): read time 1970-1-1 1:0:17
[ 5.401235] rtc0 rtc0: setting system clock to 1970-01-01 01:00:17 UTC (3617)
[ 5.412107] sunxi_get_soc_bin: slow chip
[ 5.418972] CPU Budget:Register notifier
[ 5.425402] CPU Budget:register Success
[ 5.431702] sunxi-budget-cooling sunxi-budget-cooling: Cooling device registered: thermal-budget-0
[ 5.447473] =========GPS========= :gsp not used in configuration
[ 5.456366] ALSA device list:
[ 5.461828] #0: snddaudio
[ 5.467042] #1: sndhdmi
[ 6.000057] [DISP] disp_device_attached_and_enable,line:159:attched ok, mgr0<-->device1, type=4, mode=5
[ 6.550996] UDF-fs: warning (device mmcblk0p2): udf_fill_super: No partition found (1)
[ 6.670039] List of all partitions:
[ 6.676224] b300 15558144 mmcblk0 driver: mmcblk
[ 6.684442] b301 262144 mmcblk0p1 00000000-0000-0000-0000-000000000000
[ 6.695113] b302 101376 mmcblk0p2 00000000-0000-0000-0000-000000000000
[ 6.705764] b310 7634944 mmcblk1 driver: mmcblk
[ 6.714014] b311 262144 mmcblk1p1 00000000-0000-0000-0000-000000000000
[ 6.724735] b312 7270400 mmcblk1p2 00000000-0000-0000-0000-000000000000
[ 6.735430] b330 4096 mmcblk1boot1 (driver?)
[ 6.743759] b320 4096 mmcblk1boot0 (driver?)
[ 6.752050] 0800 312571222 sda driver: sd
[ 6.759567] 0801 312568832 sda1 00000000-0000-0000-0000-000000000000
[ 6.769861] No filesystem could mount root, tried: ext3 ext2 ext4 squashfs vfat msdos iso9660 ntfs fuseblk udf
[ 6.783765] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(179,2)
[ 6.795797] [
[ 6.808059] [
[ 6.819388] [
[ 6.831521] [
[ 6.844180] [
[ 6.856949] [
[ 6.869961] [
[ 6.882706] CPU0: stopping
[ 6.888597] [
[ 6.890003] [
[ 6.890003] [
[ 6.890003] [
[ 6.890003] Exception stack(0xe5d51dc8 to 0xe5d51e10)
[ 6.890003] 1dc0: e5d51e14 00000000 00000000 00000b7d 1567520f 00005dbf
[ 6.890003] 1de0: 00000002 c0d0ce08 00000000 00000030 00000002 e5d51e2c e5d51df8 e5d51e10
[ 6.890003] 1e00: c0315878 c03157f4 80000013 ffffffff
[ 6.890003] [
[ 6.890003] [
[ 6.890003] [
[ 6.890003] [
[ 6.890003] [
[ 6.890003] [
[ 6.890003] [
[ 6.890003] [
[ 6.890003] [
[ 6.890003] [
[ 6.890003] [
[ 6.890003] [
[ 6.890003] [
[ 6.892702] CPU2: stopping
[ 6.892702] [
[ 6.892702] [
[ 6.892702] [
[ 6.892702] [
[ 6.892702] Exception stack(0xe68f3f68 to 0xe68f3fb0)
[ 6.892702] 3f60: 0000003f c0b5d19c 00000000 00000000 e68f2000 c0c93b48
[ 6.892702] 3f80: c076e7a4 c0b61810 4000406a 410fc075 00000000 e68f3fbc e68f3fb0 e68f3fb0
[ 6.892702] 3fa0: c0011588 c001158c 60000113 ffffffff
[ 6.892702] [
[ 6.892702] [
[ 6.892702] [
[ 6.892702] [
[ 6.892702] CPU3: stopping
[ 6.892702] [
[ 6.892702] [
[ 6.892702] [
[ 6.892702] [
[ 6.892702] Exception stack(0xe68fdf68 to 0xe68fdfb0)
[ 6.892702] df60: 0000001f c0b5d19c 00000000 00000000 e68fc000 c0c93b48
[ 6.892702] df80: c076e7a4 c0b61810 4000406a 410fc075 00000000 e68fdfbc e68fdfb0 e68fdfb0
[ 6.892702] dfa0: c0011588 c001158c 60000013 ffffffff
[ 6.892702] [
[ 6.892702] [
[ 6.892702] [
[ 6.892702] [
[ 6.892688] CPU1: stopping
[ 6.892688] [
[ 6.892688] [
[ 6.892688] [
[ 6.892688] [
[ 6.892688] Exception stack(0xe68cbc30 to 0xe68cbc78)
[ 6.892688] bc20: 00000002 c0b39680 00000000 00000000
[ 6.892688] bc40: e6a47d00 00000001 e69fdb40 00000000 00000000 00000002 c0b5d640 e68cbc84
[ 6.892688] bc60: e68cbc88 e68cbc78 c007a448 c006ee4c a0000113 ffffffff
[ 6.892688] [
[ 6.892688] [
[ 6.892688] [
[ 6.892688] [
[ 6.892688] [
[ 6.892688] [
[ 6.892688] [
[ 6.892688] [
[ 6.892688] [
[ 6.892688] [
[ 6.892688] [
[ 6.892688] Exception stack(0xe68cbf68 to 0xe68cbfb0)
[ 6.892688] bf60: 0000007f c0b5d19c 00000000 00000000 e68ca000 c0c93b48
[ 6.892688] bf80: c076e7a4 c0b61810 4000406a 410fc075 00000000 e68cbfbc e68cbfb0 e68cbfb0
[ 6.892688] bfa0: c0011588 c001158c 60000113 ffffffff
[ 6.892688] [
[ 6.892688] [
[ 6.892688] [
[ 6.892688] [
[ 6.892701] CPU7: stopping
[ 6.892701] [
[ 6.892701] [
[ 6.892701] [
[ 6.892701] [
[ 6.892701] Exception stack(0xe6955f68 to 0xe6955fb0)
[ 6.892701] 5f60: 00000001 c0b5d19c 00000000 00000000 e6954000 c0c93b48
[ 6.892701] 5f80: c076e7a4 c0b61810 4000406a 410fc075 00000000 e6955fbc e6955fb0 e6955fb0
[ 6.892701] 5fa0: c0011588 c001158c 60000113 ffffffff
[ 6.892701] [
[ 7.912530] SMP: failed to stop secondary CPUs
[ 6.892701] [
[ 6.892701] [
[ 6.892701] [
[ 6.892701] CPU4: stopping
[ 6.892701] [
[ 6.892701] [
[ 6.892701] [
[ 6.892701] [
[ 6.892701] Exception stack(0xe6907f68 to 0xe6907fb0)
[ 6.892701] 7f60: 0000000f c0b5d19c 00000000 00000000 e6906000 c0c93b48
[ 6.892701] 7f80: c076e7a4 c0b61810 4000406a 410fc075 00000000 e6907fbc e6907fb0 e6907fb0
[ 6.892701] 7fa0: c0011588 c001158c 60000113 ffffffff
[ 6.892701] [
[ 6.892701] [
[ 6.892701] [
[ 6.892701] [
[ 6.892705] CPU5: stopping
[ 6.892705] [
[ 6.892705] [
[ 6.892705] [
[ 6.892705] [
[ 6.892705] Exception stack(0xe6927f68 to 0xe6927fb0)
[ 6.892705] 7f60: 00000007 c0b5d19c 00000000 00000000 e6926000 c0c93b48
[ 6.892705] 7f80: c076e7a4 c0b61810 4000406a 410fc075 00000000 e6927fbc e6927fb0 e6927fb0
[ 6.892705] 7fa0: c0011588 c001158c 60000113 ffffffff
[ 6.892705] [
[ 6.892705] [
[ 6.892705] [
[ 6.892705] [
[ 8.912543] sun8i hotplug: try to kill cpu:0 failed!
[ 9.921477] sun8i hotplug: try to kill cpu:1 failed!
[ 10.930345] sun8i hotplug: try to kill cpu:2 failed!
[ 11.939129] sun8i hotplug: try to kill cpu:3 failed!
[ 12.947850] sun8i hotplug: try to kill cpu:4 failed!
[ 13.956495] sun8i hotplug: try to kill cpu:5 failed!
[ 14.965066] sun8i hotplug: try to kill cpu:7 failed!
[ 36.100008] ------------[ cut here ]------------
[ 36.108119] WARNING: at kernel/watchdog.c:255 watchdog_timer_fn+0x118/0x2ec()
[ 36.110003] Watchdog detected hard LOCKUP on cpu 1
[ 36.110003] Modules linked in:
[ 36.110003] [
[ 36.110003] [
[ 36.110003] [
[ 36.110003] [
[ 36.110003] [
[ 36.110003] [
[ 36.110003] [
[ 36.110003] [
[ 36.110003] [
[ 36.110003] [
[ 36.110003] [
[ 36.110003] [
`
Can you help me?
Elluminatus
on 19 Mar 2018
@Elluminatus
Thanks 👍
Notes:
[ 6.769861] No filesystem could mount root, tried: ext3 ext2 ext4 squashfs vfat msdos iso9660 ntfs fuseblk udf
[ 6.783765] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(179,2)
After running PREP, and before rebooting, please try disabling FS expansion:
rm /etc/systemd/system/dietpi-fs_expand.service
rm /var/lib/dietpi/fs_partition_resize.sh
rm /etc/systemd/system/dietpi-fs_partition_resize.service
systemctl daemon-reload
Also, if we can get the following before the reboot, may help:
blkid
df -h
cat /etc/fstab
@fordee:
Here are the outputs:
blkid:
root@bpi-iot-ros-ai:/home/pi# blkid
/dev/mmcblk0p1: SEC_TYPE="msdos" LABEL="BPI-BOOT" UUID="CE95-5411" TYPE="vfat" PARTUUID="000bc5c9-01"
/dev/mmcblk0p2: LABEL="BPI-ROOT" UUID="4e362d90-5b5d-4e56-bdc8-493003f13ef7" TYPE="ext4" PARTUUID="000bc5c9-02"
/dev/sda1: LABEL="Volume" UUID="98E440A0E440830C" TYPE="ntfs" PARTUUID="b5b1c71d-01"
/dev/mmcblk1p1: SEC_TYPE="msdos" LABEL="BPI-BOOT" UUID="CE95-5411" TYPE="vfat" PARTUUID="70b18045-01"
/dev/mmcblk0: PTUUID="000bc5c9" PTTYPE="dos"
/dev/mmcblk1: PTUUID="70b18045" PTTYPE="dos"
/dev/mmcblk1p2: PARTUUID="70b18045-02"
df -h
root@bpi-iot-ros-ai:/home/pi# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/root 4.5G 640M 3.7G 15% /
devtmpfs 750M 0 750M 0% /dev
tmpfs 1006M 0 1006M 0% /dev/shm
tmpfs 1006M 18M 989M 2% /run
tmpfs 5.0M 4.0K 5.0M 1% /run/lock
tmpfs 1006M 0 1006M 0% /sys/fs/cgroup
/dev/mmcblk0p1 256M 190M 67M 74% /boot
tmpfs 202M 0 202M 0% /run/user/1000
/dev/mmcblk1p1 256M 0 256M 0% /media/pi/BPI-BOOT
tmpfs 1005M 0 1005M 0% /tmp
tmpfs 20M 0 20M 0% /var/log
tmpfs 10M 1.4M 8.7M 14% /DietPi
/dev/sda1 299G 96M 298G 1% /mnt/98E440A0E440830C
cat /etc/fstab
root@bpi-iot-ros-ai:/home/pi# cat /etc/fstab
Samba Client------------------------------------------------------
/mnt/samba . Please use dietpi-config and the Networking Options: NAS menu to setup this mount
FTP Client Mount--------------------------------------------------
/mnt/ftp_client . Please use dietpi-config and the Networking Options: NAS menu to setup this mount
NFS Client Mount--------------------------------------------------
/mnt/nfs_client . Please use dietpi-config and the Networking Options: NAS menu to setup this mount
TMPFS / MISC ------------------------------------------------------
proc /proc proc defaults 0 0
tmpfs /tmp tmpfs defaults,size=1005M,noatime,nodev,nosuid,mode=1777 0 0
tmpfs /var/log tmpfs defaults,size=20m,noatime,nodev,nosuid,mode=1777 0 0
tmpfs /DietPi tmpfs defaults,size=10m,noatime,nodev,nosuid,mode=1777 0 0
Internal Drives---------------------------------------------------
UUID=CE95-5411 /boot auto defaults,noatime 0 0
UUID=4e362d90-5b5d-4e56-bdc8-493003f13ef7 / auto defaults,noatime 0 0
UUID=98E440A0E440830C /mnt/98E440A0E440830C auto defaults,noatime,x-systemd.automount,nofail 0 0
Okay now it is runing and updating to 6.4
only 2 things failed:
Failed to start DietPi RAMdisk
Failed to start Dietpi RAMlog
This is the output from "systemctl status dietpi-ramlog.service"
root@DietPi:~# systemctl status dietpi-ramlog.service
- dietpi-ramlog.service - DietPi-RAMlog
Loaded: loaded (/etc/systemd/system/dietpi-ramlog.service; enabled; vendor pr
eset: enabled)
Active: failed (Result: exit-code) since Mon 2018-03-19 17:27:09 G
MT; 7min ago
Process: 364 ExecStart=/bin/bash -c /boot/dietpi/dietpi-ramlog 0 &>> /var/tmp/
dietpi/logs/dietpi-ramlog.log (code=exited, status=127)
Process: 351 ExecStartPre=/bin/mkdir -p /var/tmp/dietpi/logs (code=exited, sta
tus=0/SUCCESS)
Mar 19 17:27:08 DietPi systemd[1]: Starting DietPi-RAMlog...
Mar 19 17:27:09 DietPi systemd[1]: dietpi-ramlog.service: Control proces
s exited, code=exited status=127
Mar 19 17:27:09 DietPi systemd[1]: Failed to start DietPi-RAMlog.
Mar 19 17:27:09 DietPi systemd[1]: dietpi-ramlog.service: Unit entered f
ailed state.
Mar 19 17:27:09 DietPi systemd[1]: dietpi-ramlog.service: Failed with re
sult 'exit-code'.
3 Depend messages
Dependency failed for DietPi-Boot
Dependency failed for DietPi-PostBoot
Dependency failed for rc.local backwards compatibility
And when I try to go over ssh this messages appear:
The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
grep: /DietPi/dietpi.txt: No such file or directory
-bash: /DietPi/dietpi/func/dietpi-globals: No such file or directory
-bash: /DietPi/dietpi/login: No such file or directory
root@DietPi:~#
Do I have to change anything?
Elluminatus
on 19 Mar 2018
@Elluminatus
The error messages you faced (besides DietPi-RAMlog) appear due to failed DietPi-RAMdisk.
Could you show output of
systemctl status dietpi-ramdiskjournalctl -u dietpi-ramdisk- /var/tmp/dietpi/logs/dietpi-ramdisk.log
- /var/tmp/dietpi/logs/dietpi-ramlog.log
And could you try to start RAMdisk manully, maybe this gives more output: /boot/dietpi/dietpi-ramdisk 0
MichaIng
on 22 Mar 2018
systemctl status dietpi-ramdisk
root@bpi-iot-ros-ai:/home/pi# systemctl status dietpi-ramdisk
● dietpi-ramdisk.service - DietPi-RAMdisk
Loaded: loaded (/etc/systemd/system/dietpi-ramdisk.service; enabled; vendor p
reset: enabled)
Active: inactive (dead) since Fri 2018-03-23 16:55:04 GMT; 8min ago
Mar 23 16:53:11 bpi-iot-ros-ai systemd[1]: Starting DietPi-RAMdisk...
Mar 23 16:53:12 bpi-iot-ros-ai systemd[1]: Started DietPi-RAMdisk.
Mar 23 16:53:12 bpi-iot-ros-ai systemd[1]: dietpi-ramdisk.service: Faile
d to set invocation ID on control group /system.slice/dietpi-ramdisk.service, ig
noring: Operation not supported
Mar 23 16:55:03 bpi-iot-ros-ai systemd[1]: Stopping DietPi-RAMdisk...
Mar 23 16:55:04 bpi-iot-ros-ai systemd[1]: Stopped DietPi-RAMdisk.
journalctl -u dietpi-ramdisk
root@bpi-iot-ros-ai:/home/pi# journalctl -u dietpi-ramdisk
-- Logs begin at Wed 2016-07-13 04:34:29 BST, end at Fri 2018-03-23 17:03:20 GMT
. --
Mar 23 16:53:11 bpi-iot-ros-ai systemd[1]: dietpi-ramdisk.service: Faile
d to set invocation ID on control group /system.slice/dietpi-ramdisk.service, ig
noring: Operation not supported
Mar 23 16:53:11 bpi-iot-ros-ai systemd[1]: Starting DietPi-RAMdisk...
Mar 23 16:53:12 bpi-iot-ros-ai systemd[1]: Started DietPi-RAMdisk.
Mar 23 16:53:12 bpi-iot-ros-ai systemd[1]: dietpi-ramdisk.service: Faile
d to set invocation ID on control group /system.slice/dietpi-ramdisk.service, ig
noring: Operation not supported
Mar 23 16:55:03 bpi-iot-ros-ai systemd[1]: Stopping DietPi-RAMdisk...
Mar 23 16:55:04 bpi-iot-ros-ai systemd[1]: Stopped DietPi-RAMdisk.
/var/tmp/dietpi/logs/dietpi-ramdisk.log
Sat 24 Mar 00:53:11 CST 2018 | DietPi-Ramdisk: Starting
Sat 24 Mar 00:53:11 CST 2018 | DietPi-Ramdisk: Completed
Fri 23 Mar 16:55:03 GMT 2018 | DietPi-Ramdisk: Stopping
Fri 23 Mar 16:55:03 GMT 2018 | DietPi-Ramdisk: Completed
/var/tmp/dietpi/logs/dietpi-ramlog.log
DietPi-Ramlog: Starting
cp: cannot stat '/var/lib/dietpi/dietpi-ramlog/storage/*': No such file or dire$
DietPi-Ramlog: Completed
DietPi-Ramlog: Stopping
DietPi-Ramlog: Completed
/boot/dietpi/dietpi-ramdisk 0
root@bpi-iot-ros-ai:/home/pi# /boot/dietpi/dietpi-ramdisk 0
shell-init: error retrieving current directory: getcwd: cannot access parent directories: No such file or directory
chdir: error retrieving current directory: getcwd: cannot access parent directories: No such file or directory
Fri 23 Mar 17:14:17 GMT 2018 | DietPi-Ramdisk: Starting
Fri 23 Mar 17:14:17 GMT 2018 | DietPi-Ramdisk: Completed
Ready for the next input/step :)
Greetings Elluminatus
Elluminatus
on 23 Mar 2018
Failed to set invocation ID on control group /system.slice/dietpi-ramdisk.service, ig
noring: Operation not supported
https://github.com/systemd/systemd/issues/5236#issuecomment-277779394?
Fourdee
on 23 Mar 2018
But so far: Seems like dietpi 6.4. is runing on a banana pi m3 great work!
Elluminatus
on 23 Mar 2018
@Elluminatus
But so far: Seems like dietpi 6.4. is runing on a banana pi m3 great work!
Is https://github.com/Fourdee/DietPi/issues/1594#issuecomment-375737860 still an issue?
If it is, its most likely due to the lower kernel version and "fluffy" pre-image used (the BPi images are a mess). The PREP script has been flawless in my testing across multiple devices and setups.
Fourdee
on 25 Mar 2018
I'll mark this as closed, as the original issue has been resolved (https://github.com/Fourdee/DietPi/issues/1594#issue-303552262).
If (https://github.com/Fourdee/DietPi/issues/1594#issuecomment-375979423) is still occurring, please reopen.
Fourdee
on 28 Mar 2018
Related issues
and09
·
3Comments
1021683053
·
3Comments
Fourdee
·
3Comments
Fourdee
·
3Comments
Invictaz
·
3Comments