Dietpi: Build-essential apt-get failed on Odroid C1

[mcsSolutions]

Creating a bug report/issue:

Apt-get has failed:
-Apt string = build-essential make autoconf automake
--no-install-recommends
-Error code = 100
-Software Title = Build-Essentials: common packages for compile
-Apt log = /etc/dietpi/logs/dietpi-software_apt.log

Required Information:

• DietPi Version | cat /DietPi/dietpi/.version? 159
• SBC Device (EG: RPi 3)? Odroid C1
• Power supply used (EG: 5v 1A RAVpower)? 5V 2.5A
• SD card used (EG: Sandisk ultra)? Sandisk Ultra Plus 16 GB
• Distro (EG: Jessie) | uname -a?Linux DietPi 3.10.104 #1 SMP PREEMP Thu Nov 10 07:56:43 CET 2016 armv71 GNU/Linux (Jessie)

Additional Information (if applicable):

• Software title? DietPi-software / additional software select build-essentials or WiringPi
• Can this issue be replicated on a fresh installation of DietPi? yes, replicated on two installs

Expected behaviour:

make file installed to allow compile/build of WiringPi install

Actual behaviour:

Error code = 100 (broken/impossible links) as shown at start of this report

Steps to reproduce:

dietpi-software / select additional software / select build-essentials / select install-go. Can also be reproduced by dietpi-software / select optimized software / select WiringPi / select install-go

Did you submit a dietpi-bugreport? no

Extra details:

/etc/dietpi/logs/dietpi-software_apt.log contains "E: Unable to correct problems, you have held broken packages."
dietpi-software_apt.log

[Fourdee]

@mcsSolutions

Hi,

Please try running the following to fix APT:

apt-get install -f

Then try reinstalling build essential:

dietpi-software install 16

[mcsSolutions]

No problems with executing commands, but does not seem to resolve issue. The console

E: Unable to correct problems, have held broken packages.

[Failed] The apt cache may be corrupt, apt mirror offline, or have held broken packages. DietPi-Software will now exit.

[Info] Apt Log:

E: Unable to correct problems, have have held broken packages.

diFixing apt package errors with ‘apt-get install –f’

Change apt mirror: ‘dietpi-config’ > Networking: NAS/MISC’ > ‘Apt Mirror’

Clear and refresh apt ‘apg-get update’

If problems persist, please crete a Git ticket so DietPi can investigate the issue:

I then changed the mirror to US and repeated the two commands you recommended. Same result.

From: Dan [mailto:[email protected]]
Sent: Saturday, January 27, 2018 5:10 AM
To: Fourdee/DietPi
Cc: mcsSolutions; Mention
Subject: Re: [Fourdee/DietPi] Build-essential apt-get failed on Odroid C1 (#1425)

@mcsSolutions https://github.com/mcssolutions

Hi,

Please try running the following to fix APT:

apt-get install -f

Then try reinstalling build essential:

dietpi-software install 16

—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub https://github.com/Fourdee/DietPi/issues/1425#issuecomment-360983903 , or mute the thread https://github.com/notifications/unsubscribe-auth/ABaX-yQT-s8hm035bOMoODqu78vOH_KWks5tOyALgaJpZM4Ru9Eb . https://github.com/notifications/beacon/ABaX-49MLZQJW8Igmcq961zMHHBJKmuhks5tOyALgaJpZM4Ru9Eb.gif

[Fourdee]

@mcsSolutions
Could be a DNS/APT_mirror issue, try running the command manually to install via APT:

apt-get update
apt-get install build-essential -y

Please copy/paste any errors.

[mcsSolutions]

root@Odroid32:~# apt-get update

Ign http://ftp.us.debian.org jessie InRelease

Get:1 http://ftp.us.debian.org jessie-updates InRelease [145 kB]

Get:2 http://security.debian.org jessie/updates InRelease [63.1 kB]

Hit http://fuzon.co.uk all InRelease

Hit http://download.mono-project.com jessie InRelease

Hit http://fuzon.co.uk jessie InRelease

Hit http://security.debian.org jessie/updates/main armhf Packages

Hit http://fuzon.co.uk all/c1 armhf Packages

Hit http://download.mono-project.com jessie/main armhf Packages

Hit http://security.debian.org jessie/updates/contrib armhf Packages

Hit http://fuzon.co.uk all/main armhf Packages

Hit http://security.debian.org jessie/updates/non-free armhf Packages

Hit http://security.debian.org jessie/updates/contrib Translation-en

Hit http://fuzon.co.uk all/testing armhf Packages

Hit http://security.debian.org jessie/updates/main Translation-en

Get:3 http://ftp.us.debian.org jessie-backports InRelease [166 kB]

Hit http://security.debian.org jessie/updates/non-free Translation-en

Hit http://ftp.us.debian.org jessie Release.gpg

Get:4 http://ftp.us.debian.org jessie-updates/main armhf Packages/DiffIndex [9,868 B]

Hit http://ftp.us.debian.org jessie-updates/contrib armhf Packages

Get:5 http://ftp.us.debian.org jessie-updates/non-free armhf Packages/DiffIndex [736 B]

Hit http://fuzon.co.uk jessie/main armhf Packages

Hit http://ftp.us.debian.org jessie-updates/contrib Translation-en

Ign http://download.mono-project.com jessie/main Translation-en_GB

Get:6 http://ftp.us.debian.org jessie-updates/main Translation-en/DiffIndex [3,688 B]

Hit http://fuzon.co.uk jessie/backports armhf Packages

Get:7 http://ftp.us.debian.org jessie-updates/non-free Translation-en/DiffIndex [736 B]

Ign http://download.mono-project.com jessie/main Translation-en

Hit http://ftp.us.debian.org jessie Release

Get:8 http://ftp.us.debian.org jessie-backports/main armhf Packages/DiffIndex [27.8 kB]

Get:9 http://ftp.us.debian.org jessie-backports/contrib armhf Packages/DiffIndex [25.7 kB]

Get:10 http://ftp.us.debian.org jessie-backports/non-free armhf Packages/DiffIndex [8,530 B]

Get:11 http://ftp.us.debian.org jessie-backports/contrib Translation-en/DiffIndex [7,468 B]

Get:12 http://ftp.us.debian.org jessie-backports/main Translation-en/DiffIndex [27.8 kB]

Get:13 http://ftp.us.debian.org jessie-backports/non-free Translation-en/DiffIndex [17.2 kB]

Hit http://ftp.us.debian.org jessie/main armhf Packages

Hit http://ftp.us.debian.org jessie/contrib armhf Packages

Hit http://ftp.us.debian.org jessie/non-free armhf Packages

Hit http://ftp.us.debian.org jessie/contrib Translation-en

Hit http://ftp.us.debian.org jessie/main Translation-en

Hit http://ftp.us.debian.org jessie/non-free Translation-en

Ign http://fuzon.co.uk all/c1 Translation-en_GB

Ign http://fuzon.co.uk all/c1 Translation-en

Ign http://fuzon.co.uk all/main Translation-en_GB

Ign http://fuzon.co.uk all/main Translation-en

Ign http://fuzon.co.uk all/testing Translation-en_GB

Ign http://fuzon.co.uk all/testing Translation-en

Ign http://fuzon.co.uk jessie/backports Translation-en_GB

Ign http://fuzon.co.uk jessie/backports Translation-en

Ign http://fuzon.co.uk jessie/main Translation-en_GB

Ign http://fuzon.co.uk jessie/main Translation-en

Fetched 504 kB in 16s (30.6 kB/s)

Reading package lists... Done

root@Odroid32:~# apt-get install build-essential -y

Reading package lists... Done

Building dependency tree

Reading state information... Done

Some packages could not be installed. This may mean that you have

requested an impossible situation or if you are using the unstable

distribution that some required packages have not yet been created

or been moved out of Incoming.

The following information may help to resolve the situation:

The following packages have unmet dependencies:

build-essential : Depends: dpkg-dev (>= 1.17.11) but it is not going to be installed

E: Unable to correct problems, you have held broken packages.

From: Dan [mailto:[email protected]]
Sent: Saturday, January 27, 2018 1:37 PM
To: Fourdee/DietPi
Cc: mcsSolutions; Mention
Subject: Re: [Fourdee/DietPi] Build-essential apt-get failed on Odroid C1 (#1425)

@mcsSolutions https://github.com/mcssolutions
Could be a DNS/APT_mirror issue, try running the command manually:

apt-get update
apt-get install build-essential -y

Please copy/paste any errors.

—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub https://github.com/Fourdee/DietPi/issues/1425#issuecomment-361017150 , or mute the thread https://github.com/notifications/unsubscribe-auth/ABaX-1V_JPAJrQA6WRtWX8bq-IIwbUXTks5tO5b9gaJpZM4Ru9Eb . https://github.com/notifications/beacon/ABaX-xli-BdwdTdjt12jYCfLzxr-MTE5ks5tO5b9gaJpZM4Ru9Eb.gif

[Fourdee]

@mcsSolutions
Strange, unable to replicate here in our testing. Limited to your system/APT sources and configuration.

build-essential : Depends: dpkg-dev (>= 1.17.11) but it is not going to be installed

Try install the pre-req manually:

apt-get install dpkg-dev build-essential -y

[mcsSolutions]

root@Odroid32:~# apt-get install dpkg-dev build-essential

Reading package lists... Done

Building dependency tree

Reading state information... Done

Some packages could not be installed. This may mean that you have

requested an impossible situation or if you are using the unstable

distribution that some required packages have not yet been created

or been moved out of Incoming.

The following information may help to resolve the situation:

The following packages have unmet dependencies:

dpkg-dev : Depends: libdpkg-perl (= 1.18.24~bpo8) but it is not going to be installed

        Depends: tar (>= 1.28-1) but 1.27.1-2+deb8u1 is to be installed

E: Unable to correct problems, you have held broken packages.

From: Dan [mailto:[email protected]]
Sent: Sunday, January 28, 2018 6:47 AM
To: Fourdee/DietPi
Cc: mcsSolutions; Mention
Subject: Re: [Fourdee/DietPi] Build-essential apt-get failed on Odroid C1 (#1425)

@mcsSolutions https://github.com/mcssolutions
Strange, unable to replicate here in our testing. Limited to your system/APT sources and configuration.

build-essential : Depends: dpkg-dev (>= 1.17.11) but it is not going to be installed

Try install the pre-req manually:

apt-get install dpkg-dev build-essential

—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub https://github.com/Fourdee/DietPi/issues/1425#issuecomment-361068311 , or mute the thread https://github.com/notifications/unsubscribe-auth/ABaX-7pf0EsMK3DETNnibdBOk6fGwsyYks5tPIhKgaJpZM4Ru9Eb . https://github.com/notifications/beacon/ABaX-5ceVG_G0SpvHyJH0meKF3CkT_mSks5tPIhKgaJpZM4Ru9Eb.gif

[mcsSolutions]

Are you using Odroid C1 in your test environment? I noticed that this DietPi package is Jessie while the Raspberry Pi one is stretch. I was able to install build-essential on Raspberry Pi with DietPi. It shows as version 12.3.

From: Dan [mailto:[email protected]]
Sent: Sunday, January 28, 2018 6:47 AM
To: Fourdee/DietPi
Cc: mcsSolutions; Mention
Subject: Re: [Fourdee/DietPi] Build-essential apt-get failed on Odroid C1 (#1425)

@mcsSolutions https://github.com/mcssolutions
Strange, unable to replicate here in our testing. Limited to your system/APT sources and configuration.

build-essential : Depends: dpkg-dev (>= 1.17.11) but it is not going to be installed

Try install the pre-req manually:

apt-get install dpkg-dev build-essential

—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub https://github.com/Fourdee/DietPi/issues/1425#issuecomment-361068311 , or mute the thread https://github.com/notifications/unsubscribe-auth/ABaX-7pf0EsMK3DETNnibdBOk6fGwsyYks5tPIhKgaJpZM4Ru9Eb . https://github.com/notifications/beacon/ABaX-5ceVG_G0SpvHyJH0meKF3CkT_mSks5tPIhKgaJpZM4Ru9Eb.gif

[MichaIng]

@mcsSolutions
Ign http://ftp.us.debian.org jessie InRelease

dpkg-dev : Depends: libdpkg-perl (= 1.18.24~bpo8) but it is not going to be installed

            Depends: tar (>= 1.28-1) but 1.27.1-2+deb8u1 is to be installed

As this mirror was somehow broken on your last apt update, APT tried to install build-essential from backports. But it does not by itself choose also the dependencies from backports, thus fail.
I personally would, if not necessary, stay without backports. Thus try to manually purge the installed packages again:

• apt-get purge dpkg-dev build-essential
• Then try to find a running APT mirror. Try http://deb.debian.org/debian/, which is a mirror director and should always find a running mirror. Then do apt update again and assure that is says Get http://deb.debian.org jessie instead of Ign ....
• If this works, then reinstall build-essentials via dietpi-software.
• Alternatively at your current stage, you could force APT to get the package and all dependencies from backports: apt-get install -y -t jessie-backports build-essential and then rerun installation via dietpi-software (which includes some other packages as well).
  €: There are no backports for this packages on official Debian repo: https://packages.debian.org/de/jessie/build-essential So they seem to come from some Odroid special repo?

[k-plan]

@MichaIng

puhh ... mcsSolutions use an old v159 image on Odroid C1.
If I remember correct, where was a /etc/apt/preferences.d/meveric-backports-pin-100 and /etc/apt/sources.list.d/meveric-jessie.list.

https://github.com/Fourdee/DietPi/issues/1385#issuecomment-357755338

If I find some spare time, I can do a reteset on the new build DietPi_v6.0_OdroidC1-ARMv7-Jessie.img and installBuild-essential on it via dietpi-software.
But can take some days. Sorry.

[MichaIng]

@Fourdee
Yes generally this should work, thou good to retest on Odoids that also come with additional repos.

In this case here it clearly looks like (temporary) unavailable mirror, thus APT chose meveric backports, failing dependencies.
Hmm about mirror again: Ign http://ftp.us.debian.org jessie InRelease Shouldn't there be an /debian/ inside this URL as well?

[mcsSolutions]

Performed the following with as much of the PuTTY windows captured as I could. I did not understand the specific steps associated with finding an APT mirror. Same failure result.

• apt-get purge dpkg-dev build-essential
• Alternatively at your current stage, you could force APT to get the package and all dependencies from backports: apt-get install -y -t jessie-backports build-essential and then rerun installation via dietpi-software (which includes some other packages as well).

root@Odroid32:~# apt-get purge dpkg-dev build-essential

Reading package lists... Done

Building dependency tree

Reading state information... Done

Package 'build-essential' is not installed, so not removed

Package 'dpkg-dev' is not installed, so not removed

The following package was automatically installed and is no longer required:

libpci3

Use 'apt-get autoremove' to remove it.

0 upgraded, 0 newly installed, 0 to remove and 54 not upgraded.

root@Odroid32:~# apt-get install -y -t jessie-backports build-essential

Reading package lists... Done

Building dependency tree

Reading state information... Done

The following package was automatically installed and is no longer required:

libpci3

Use 'apt-get autoremove' to remove it.

The following extra packages will be installed:

cpp cpp-4.9 dpkg dpkg-dev g++ g++-4.9 gcc gcc-4.9 libasan1 libatomic1

libc-dev-bin libc6 libc6-dev libcloog-isl4 libdpkg-perl libgcc-4.9-dev

libgomp1 libisl10 libmpc3 libmpfr4 libstdc++-4.9-dev libubsan0

linux-libc-dev make patch perl tar

Suggested packages:

cpp-doc gcc-4.9-locales debsig-verify debian-keyring gcc-4.9-doc

libstdc++6-4.9-dbg gcc-multilib manpages-dev autoconf automake libtool flex

bison gdb gcc-doc libgcc1-dbg libgomp1-dbg libitm1-dbg libatomic1-dbg

libasan1-dbg liblsan0-dbg libtsan0-dbg libubsan0-dbg libcilkrts5-dbg

libquadmath-dbg glibc-doc libstdc++-4.9-doc make-doc ed diffutils-doc

perl-doc libterm-readline-gnu-perl libterm-readline-perl-perl ncompress

tar-scripts

Recommended packages:

fakeroot libalgorithm-merge-perl libfile-fcntllock-perl rename

The following NEW packages will be installed:

build-essential cpp cpp-4.9 dpkg-dev g++ g++-4.9 gcc gcc-4.9 libasan1

libatomic1 libc-dev-bin libc6-dev libcloog-isl4 libdpkg-perl libgcc-4.9-dev

libgomp1 libisl10 libmpc3 libmpfr4 libstdc++-4.9-dev libubsan0

linux-libc-dev make patch perl

The following packages will be upgraded:

dpkg libc6 tar

3 upgraded, 25 newly installed, 0 to remove and 77 not upgraded.

Need to get 34.7 MB/38.6 MB of archives.

After this operation, 88.9 MB of additional disk space will be used.

Get:1 http://ftp.us.debian.org/debian/ jessie-backports/main tar armhf 1.29b-1~bpo8+1 [724 kB]

Get:2 http://fuzon.co.uk/meveric/ jessie/backports dpkg armhf 1.18.24~bpo8 [2,058 kB]

Get:3 http://ftp.us.debian.org/debian/ jessie/main perl armhf 5.20.2-3+deb8u9 [2,082 kB]

Get:4 http://fuzon.co.uk/meveric/ jessie/backports libdpkg-perl all 1.18.24~bpo8 [1,285 kB]

Get:5 http://ftp.us.debian.org/debian/ jessie/main libasan1 armhf 4.9.2-10 [168 kB]

Get:6 http://ftp.us.debian.org/debian/ jessie/main libatomic1 armhf 4.9.2-10 [6,062 B]

Get:7 http://ftp.us.debian.org/debian/ jessie/main libisl10 armhf 0.12.2-2 [338 kB]

Get:8 http://ftp.us.debian.org/debian/ jessie/main libcloog-isl4 armhf 0.18.2-1+b2 [50.8 kB]

Get:9 http://ftp.us.debian.org/debian/ jessie/main libgomp1 armhf 4.9.2-10 [35.7 kB]

Get:10 http://ftp.us.debian.org/debian/ jessie/main libmpfr4 armhf 3.1.2-2 [508 kB]

Get:11 http://fuzon.co.uk/meveric/ jessie/backports dpkg-dev all 1.18.24~bpo8 [1,593 kB]

Get:12 http://ftp.us.debian.org/debian/ jessie/main libubsan0 armhf 4.9.2-10 [69.6 kB]

Get:13 http://ftp.us.debian.org/debian/ jessie/main libmpc3 armhf 1.0.2-1 [31.4 kB]

Get:14 http://ftp.us.debian.org/debian/ jessie/main patch armhf 2.7.5-1 [101 kB]

Get:15 http://ftp.us.debian.org/debian/ jessie/main libc-dev-bin armhf 2.19-18+deb8u10 [232 kB]

Get:16 http://ftp.us.debian.org/debian/ jessie-backports/main linux-libc-dev armhf 4.9.65-3+deb9u2~bpo8+1 [1,279 kB]

Get:17 http://ftp.us.debian.org/debian/ jessie/main libc6-dev armhf 2.19-18+deb8u10 [1,750 kB]

Get:18 http://ftp.us.debian.org/debian/ jessie/main cpp-4.9 armhf 4.9.2-10 [4,220 kB]

Get:19 http://ftp.us.debian.org/debian/ jessie/main cpp armhf 4:4.9.2-2 [17.4 kB]

Get:20 http://ftp.us.debian.org/debian/ jessie/main libgcc-4.9-dev armhf 4.9.2-10 [358 kB]

Get:21 http://ftp.us.debian.org/debian/ jessie/main gcc-4.9 armhf 4.9.2-10 [4,450 kB]

Get:22 http://ftp.us.debian.org/debian/ jessie/main gcc armhf 4:4.9.2-2 [5,138 B]

Get:23 http://ftp.us.debian.org/debian/ jessie/main libstdc++-4.9-dev armhf 4.9.2-10 [1,135 kB]

Get:24 http://ftp.us.debian.org/debian/ jessie/main g++-4.9 armhf 4.9.2-10 [11.8 MB]

Get:25 http://ftp.us.debian.org/debian/ jessie/main g++ armhf 4:4.9.2-2 [1,510 B]

Get:26 http://ftp.us.debian.org/debian/ jessie/main make armhf 4.0-8.1 [335 kB]

Get:27 http://ftp.us.debian.org/debian/ jessie/main build-essential armhf 11.7 [6,934 B]

Fetched 34.7 MB in 5min 4s (114 kB/s)

Preconfiguring packages ...

(Reading database ... 23540 files and directories currently installed.)

Preparing to unpack .../tar_1.29b-1~bpo8+1_armhf.deb ...

Unpacking tar (1.29b-1~bpo8+1) over (1.27.1-2+deb8u1) ...

Setting up tar (1.29b-1~bpo8+1) ...

update-alternatives: warning: forcing reinstallation of alternative /usr/sbin/rmt-tar because link group rmt is broken

(Reading database ... 23541 files and directories currently installed.)

Preparing to unpack .../dpkg_1.18.24~bpo8_armhf.deb ...

Unpacking dpkg (1.18.24~bpo8) over (1.17.27) ...

Setting up dpkg (1.18.24~bpo8) ...

(Reading database ... 23531 files and directories currently installed.)

Preparing to unpack .../libc6_2.19-18+deb8u10_armhf.deb ...

LD_LIBRARY_PATH contains the traditional /lib directory,

but not the multiarch directory /lib/arm-linux-gnueabihf.

It is not safe to upgrade the C library in this situation;

please remove the /lib/directory from LD_LIBRARY_PATH and

try again.

dpkg: error processing archive /var/cache/apt/archives/libc6_2.19-18+deb8u10_armhf.deb (--unpack):

subprocess new pre-installation script returned error exit status 1

Errors were encountered while processing:

/var/cache/apt/archives/libc6_2.19-18+deb8u10_armhf.deb

E: Sub-process /usr/bin/dpkg returned an error code (1)

root@Odroid32:~#

DietPi-Software

─────────────────────────────────────────────────────

Mode: Update & upgrade APT

Please wait...

Ign http://ftp.us.debian.org jessie InRelease

Hit http://fuzon.co.uk all InRelease

Get:1 http://security.debian.org jessie/updates InRelease [63.1 kB]

Get:2 http://ftp.us.debian.org jessie-updates InRelease [145 kB]

Hit http://fuzon.co.uk jessie InRelease

Hit http://download.mono-project.com jessie InRelease

Hit http://fuzon.co.uk all/c1 armhf Packages

Hit http://download.mono-project.com jessie/main armhf Packages

Hit http://fuzon.co.uk all/main armhf Packages

Get:3 http://security.debian.org jessie/updates/main armhf Packages [475 kB]

Hit http://fuzon.co.uk all/testing armhf Packages

Hit http://fuzon.co.uk jessie/main armhf Packages

Hit http://fuzon.co.uk jessie/backports armhf Packages

Get:4 http://ftp.us.debian.org jessie-backports InRelease [166 kB]

Ign http://download.mono-project.com jessie/main Translation-en_GB

Ign http://download.mono-project.com jessie/main Translation-en

Hit http://security.debian.org jessie/updates/contrib armhf Packages

Hit http://security.debian.org jessie/updates/non-free armhf Packages

Hit http://security.debian.org jessie/updates/contrib Translation-en

Hit http://security.debian.org jessie/updates/main Translation-en

Hit http://security.debian.org jessie/updates/non-free Translation-en

Hit http://ftp.us.debian.org jessie Release.gpg

Get:5 http://ftp.us.debian.org jessie-updates/main armhf Packages/DiffIndex [9,868 B]

Hit http://ftp.us.debian.org jessie-updates/contrib armhf Packages

Get:6 http://ftp.us.debian.org jessie-updates/non-free armhf Packages/DiffIndex [736 B]

Hit http://ftp.us.debian.org jessie-updates/contrib Translation-en

Get:7 http://ftp.us.debian.org jessie-updates/main Translation-en/DiffIndex [3,688 B]

Get:8 http://ftp.us.debian.org jessie-updates/non-free Translation-en/DiffIndex [736 B]

Hit http://ftp.us.debian.org jessie Release

Get:9 http://ftp.us.debian.org jessie-backports/main armhf Packages/DiffIndex [27.8 kB]

Get:10 http://ftp.us.debian.org jessie-backports/contrib armhf Packages/DiffIndex [25.7 kB]

Get:11 http://ftp.us.debian.org jessie-backports/non-free armhf Packages/DiffIndex [8,530 B]

Get:12 http://ftp.us.debian.org jessie-backports/contrib Translation-en/DiffIndex [7,468 B]

Get:13 http://ftp.us.debian.org jessie-backports/main Translation-en/DiffIndex [27.8 kB]

Get:14 http://ftp.us.debian.org jessie-backports/non-free Translation-en/DiffIndex [17.2 kB]

Get:15 http://ftp.us.debian.org jessie-backports/main armhf 2018-01-28-1432.19.pdiff [258 B]

Hit http://ftp.us.debian.org jessie/main armhf Packages

Get:16 http://ftp.us.debian.org jessie-backports/main armhf 2018-01-28-1432.19.pdiff [258 B]

Hit http://ftp.us.debian.org jessie/contrib armhf Packages

Hit http://ftp.us.debian.org jessie/non-free armhf Packages

Hit http://ftp.us.debian.org jessie/contrib Translation-en

Hit http://ftp.us.debian.org jessie/main Translation-en

Hit http://ftp.us.debian.org jessie/non-free Translation-en

Ign http://fuzon.co.uk all/c1 Translation-en_GB

Ign http://fuzon.co.uk all/c1 Translation-en

Ign http://fuzon.co.uk all/main Translation-en_GB

Ign http://fuzon.co.uk all/main Translation-en

Ign http://fuzon.co.uk all/testing Translation-en_GB

Ign http://fuzon.co.uk all/testing Translation-en

Ign http://fuzon.co.uk jessie/backports Translation-en_GB

Ign http://fuzon.co.uk jessie/backports Translation-en

Ign http://fuzon.co.uk jessie/main Translation-en_GB

Ign http://fuzon.co.uk jessie/main Translation-en

Fetched 979 kB in 23s (42.1 kB/s)

Reading package lists... Done

[Info] Running apt simulation to check for errors, please wait...

Inst bash-doc (4.3-11+deb8u1 Debian:8.10/oldstable [all])

Conf bash-doc (4.3-11+deb8u1 Debian:8.10/oldstable [all])

[Ok] Apt simulation | Completed

───────────────────────────────────────

DietPi | 09:54 | Mon 29/01/18

───────────────────────────────────────

V159 | oDroid C1 (armv7l)

───────────────────────────────────────

IP Address | 192.168.0.32

───────────────────────────────────────

Welcome to DietPi-Software

DietPi-Software

─────────────────────────────────────────────────────

Mode: Update & upgrade APT

Please wait...

Reading package lists... Done

Building dependency tree

Reading state information... Done

Calculating upgrade... The following package was automatically installed and is no longer required:

libpci3

Use 'apt-get autoremove' to remove it.

Done

The following packages have been kept back:

linux-image-armhf-odroid-c1

The following packages will be upgraded:

ca-certificates curl debconf debconf-utils debian-archive-keyring gpgv

initramfs-tools libc6 libcurl3 libcurl3-gnutls libdb5.3 libdns-export100

libexpat1 libffi6 libgcrypt20 libgnutls-deb0-28 libgnutls-openssl27

libgssapi-krb5-2 libicu52 libirs-export91 libisc-export95 libisccfg-export90

libk5crypto3 libkrb5-3 libkrb5support0 libldap-2.4-2 libncurses5

libncursesw5 libpam-modules libpam-modules-bin libpam0g librtmp1 libssl1.0.0

libsystemd0 libtasn1-6 libtiff5 libtinfo5 libudev1 linux-image-3.10.104

locales multiarch-support openssl passwd sensible-utils sudo systemd

systemd-sysv tzdata udev unzip wget wpasupplicant

52 upgraded, 0 newly installed, 0 to remove and 1 not upgraded.

Need to get 40.6 MB of archives.

After this operation, 4,096 B disk space will be freed.

Get:1 http://security.debian.org/ jessie/updates/main curl armhf 7.38.0-4+deb8u9 [196 kB]

Get:2 http://ftp.us.debian.org/debian/ jessie/main libc6 armhf 2.19-18+deb8u10 [3,965 kB]

Get:3 http://fuzon.co.uk/meveric/ all/c1 linux-image-3.10.104 armhf 3.10.104-20170326-C1 [11.8 MB]

Get:4 http://security.debian.org/ jessie/updates/main libcurl3 armhf 7.38.0-4+deb8u9 [236 kB]

Get:5 http://security.debian.org/ jessie/updates/main libcurl3-gnutls armhf 7.38.0-4+deb8u9 [229 kB]

Get:6 http://security.debian.org/ jessie/updates/main libisc-export95 armhf 1:9.9.5.dfsg-9+deb8u15 [129 kB]

Get:7 http://security.debian.org/ jessie/updates/main libdns-export100 armhf 1:9.9.5.dfsg-9+deb8u15 [416 kB]

Get:8 http://security.debian.org/ jessie/updates/main libisccfg-export90 armhf 1:9.9.5.dfsg-9+deb8u15 [38.7 kB]

Get:9 http://security.debian.org/ jessie/updates/main libirs-export91 armhf 1:9.9.5.dfsg-9+deb8u15 [37.2 kB]

Get:10 http://security.debian.org/ jessie/updates/main libtiff5 armhf 4.0.3-12.3+deb8u5 [206 kB]

Get:11 http://security.debian.org/ jessie/updates/main sensible-utils all 0.0.9+deb8u1 [10.9 kB]

Get:12 http://ftp.us.debian.org/debian/ jessie/main libtinfo5 armhf 5.9+20140913-1+deb8u2 [271 kB]

Get:13 http://ftp.us.debian.org/debian/ jessie/main libncursesw5 armhf 5.9+20140913-1+deb8u2 [103 kB]

Get:14 http://ftp.us.debian.org/debian/ jessie/main libncurses5 armhf 5.9+20140913-1+deb8u2 [78.5 kB]

Get:15 http://ftp.us.debian.org/debian/ jessie/main libudev1 armhf 215-17+deb8u7 [53.1 kB]

Get:16 http://ftp.us.debian.org/debian/ jessie/main udev armhf 215-17+deb8u7 [853 kB]

Get:17 http://ftp.us.debian.org/debian/ jessie/main initramfs-tools all 0.120+deb8u3 [96.7 kB]

Get:18 http://ftp.us.debian.org/debian/ jessie/main libsystemd0 armhf 215-17+deb8u7 [83.1 kB]

Get:19 http://ftp.us.debian.org/debian/ jessie/main systemd armhf 215-17+deb8u7 [2,316 kB]

Get:20 http://ftp.us.debian.org/debian/ jessie/main systemd-sysv armhf 215-17+deb8u7 [36.7 kB]

Get:21 http://ftp.us.debian.org/debian/ jessie/main debconf-utils all 1.5.56+deb8u1 [57.6 kB]

Get:22 http://ftp.us.debian.org/debian/ jessie/main debconf all 1.5.56+deb8u1 [167 kB]

Get:23 http://ftp.us.debian.org/debian/ jessie/main libpam0g armhf 1.1.8-3.1+deb8u2+b1 [121 kB]

Get:24 http://ftp.us.debian.org/debian/ jessie/main libpam-modules-bin armhf 1.1.8-3.1+deb8u2+b1 [101 kB]

Get:25 http://ftp.us.debian.org/debian/ jessie/main libpam-modules armhf 1.1.8-3.1+deb8u2+b1 [290 kB]

Get:26 http://ftp.us.debian.org/debian/ jessie/main libdb5.3 armhf 5.3.28-9+deb8u1 [601 kB]

Get:27 http://ftp.us.debian.org/debian/ jessie/main libgcrypt20 armhf 1.6.3-2+deb8u4 [354 kB]

Get:28 http://ftp.us.debian.org/debian/ jessie/main libssl1.0.0 armhf 1.0.1t-1+deb8u7 [867 kB]

Get:29 http://ftp.us.debian.org/debian/ jessie/main libgnutls-openssl27 armhf 3.3.8-6+deb8u7 [140 kB]

Get:30 http://ftp.us.debian.org/debian/ jessie/main libtasn1-6 armhf 4.2-3+deb8u3 [43.3 kB]

Get:31 http://ftp.us.debian.org/debian/ jessie/main libgnutls-deb0-28 armhf 3.3.8-6+deb8u7 [635 kB]

Get:32 http://ftp.us.debian.org/debian/ jessie/main libgssapi-krb5-2 armhf 1.12.1+dfsg-19+deb8u4 [132 kB]

Get:33 http://ftp.us.debian.org/debian/ jessie/main libkrb5-3 armhf 1.12.1+dfsg-19+deb8u4 [261 kB]

Get:34 http://ftp.us.debian.org/debian/ jessie/main libkrb5support0 armhf 1.12.1+dfsg-19+deb8u4 [55.5 kB]

Get:35 http://ftp.us.debian.org/debian/ jessie/main libk5crypto3 armhf 1.12.1+dfsg-19+deb8u4 [111 kB]

Get:36 http://ftp.us.debian.org/debian/ jessie/main libldap-2.4-2 armhf 2.4.40+dfsg-1+deb8u3 [195 kB]

Get:37 http://ftp.us.debian.org/debian/ jessie/main librtmp1 armhf 2.4+20150115.gita107cef-1+deb8u1 [55.3 kB]

Get:38 http://ftp.us.debian.org/debian/ jessie/main libexpat1 armhf 2.1.0-6+deb8u4 [61.8 kB]

Get:39 http://ftp.us.debian.org/debian/ jessie/main libffi6 armhf 3.1-2+deb8u1 [18.8 kB]

Get:40 http://ftp.us.debian.org/debian/ jessie/main libicu52 armhf 52.1-8+deb8u6 [6,585 kB]

Get:41 http://ftp.us.debian.org/debian/ jessie/main gpgv armhf 1.4.18-7+deb8u4 [181 kB]

Get:42 http://ftp.us.debian.org/debian/ jessie/main debian-archive-keyring all 2017.5~deb8u1 [56.7 kB]

Get:43 http://ftp.us.debian.org/debian/ jessie/main multiarch-support armhf 2.19-18+deb8u10 [181 kB]

Get:44 http://ftp.us.debian.org/debian/ jessie/main passwd armhf 1:4.2-3+deb8u4 [935 kB]

Get:45 http://ftp.us.debian.org/debian/ jessie/main tzdata all 2017c-0+deb8u1 [232 kB]

Get:46 http://ftp.us.debian.org/debian/ jessie/main wget armhf 1.16-1+deb8u4 [476 kB]

Get:47 http://ftp.us.debian.org/debian/ jessie/main locales all 2.19-18+deb8u10 [3,930 kB]

Get:48 http://ftp.us.debian.org/debian/ jessie/main openssl armhf 1.0.1t-1+deb8u7 [659 kB]

Get:49 http://ftp.us.debian.org/debian/ jessie/main ca-certificates all 20141019+deb8u3 [207 kB]

Get:50 http://ftp.us.debian.org/debian/ jessie/main sudo armhf 1.8.10p3-1+deb8u5 [833 kB]

Get:51 http://ftp.us.debian.org/debian/ jessie/main unzip armhf 6.0-16+deb8u3 [139 kB]

Get:52 http://ftp.us.debian.org/debian/ jessie/main wpasupplicant armhf 2.3-1+deb8u5 [804 kB]

Fetched 40.6 MB in 5min 0s (135 kB/s)

Extracting templates from packages: 100%

Preconfiguring packages ...

(Reading database ... 23531 files and directories currently installed.)

Preparing to unpack .../libc6_2.19-18+deb8u10_armhf.deb ...

LD_LIBRARY_PATH contains the traditional /lib directory,

but not the multiarch directory /lib/arm-linux-gnueabihf.

It is not safe to upgrade the C library in this situation;

please remove the /lib/directory from LD_LIBRARY_PATH and

try again.

dpkg: error processing archive /var/cache/apt/archives/libc6_2.19-18+deb8u10_armhf.deb (--unpack):

subprocess new pre-installation script returned error exit status 1

Errors were encountered while processing:

/var/cache/apt/archives/libc6_2.19-18+deb8u10_armhf.deb

E: Sub-process /usr/bin/dpkg returned an error code (1)

DietPi-Software

─────────────────────────────────────────────────────

Mode: Checking for prerequisite software

Please wait...

DietPi-Services

─────────────────────────────────────────────────────

Mode: stop

Please wait...

[Ok] stop : cron

DietPi-Software

─────────────────────────────────────────────────────

Mode: Install software

Please wait...

Build-Essentials: common packages for compile

[Info] Please wait...

processing | D i e t P i

[Info] APT is processing, please wait...

Extracting templates from packages: 100%

Preconfiguring packages ...

(Reading database ... 23531 files and directories currently installed.)

Preparing to unpack .../libc6_2.19-18+deb8u10_armhf.deb ...

LD_LIBRARY_PATH contains the traditional /lib directory,

but not the multiarch directory /lib/arm-linux-gnueabihf.

It is not safe to upgrade the C library in this situation;

please remove the /lib/directory from LD_LIBRARY_PATH and

try again.

dpkg: error processing archive /var/cache/apt/archives/libc6_2.19-18+deb8u10_armhf.deb (--unpack):

subprocess new pre-installation script returned error exit status 1

Errors were encountered while processing:

/var/cache/apt/archives/libc6_2.19-18+deb8u10_armhf.deb

E: Sub-process /usr/bin/dpkg returned an error code (1)

[Failed] The apt cache may be corrupt, apt mirror offline, or you have held broken packages. DietPi-Software will now exit.

[Info] Apt Log:

Extracting templates from packages: 100%

Preconfiguring packages ...

(Reading database ... 23531 files and directories currently installed.)

Preparing to unpack .../libc6_2.19-18+deb8u10_armhf.deb ...

LD_LIBRARY_PATH contains the traditional /lib directory,

but not the multiarch directory /lib/arm-linux-gnueabihf.

It is not safe to upgrade the C library in this situation;

please remove the /lib/directory from LD_LIBRARY_PATH and

try again.

dpkg: error processing archive /var/cache/apt/archives/libc6_2.19-18+deb8u10_armhf.deb (--unpack):

subprocess new pre-installation script returned error exit status 1

Errors were encountered while processing:

/var/cache/apt/archives/libc6_2.19-18+deb8u10_armhf.deb

E: Sub-process /usr/bin/dpkg returned an error code (1)

[Info] Please try:

[Info] - Fixing apt package errors with 'apt-get install -f'

[Info] - Change apt mirror: 'dietpi-config' > 'Networking: NAS/MISC' > 'Apt Mirror'

[Info] - Clear and refresh apt 'apt-get update'

[Info] - If problems persist, please create a Git ticket so DietPi can investigate the issue:

• https://github.com/Fourdee/DietPi/issues

Apt-get has failed: │

 │  - Apt string = build-essential make autoconf automake             │

 │ --no-install-recommends                                            │

 │  - Error code = 100                                                │

 │  - Software Title = Build-Essentials: common packages for compile  │

 │  - Apt log = /etc/dietpi/logs/dietpi-software_apt.log              │

 │                                                                    │

 │ Please report this issue to DietPi (INCLUDING THE APT LOG) so it   │

 │ can be investigated.                                               │

 │                                                                    │

 │ DietPi-Software will now exit.                                     │

 │                                                                    │

 │                                                                    │

 │                               <Ok>

From: MichaIng [mailto:[email protected]]
Sent: Sunday, January 28, 2018 3:30 PM
To: Fourdee/DietPi
Cc: mcsSolutions; Mention
Subject: Re: [Fourdee/DietPi] Build-essential apt-get failed on Odroid C1 (#1425)

@mcsSolutions https://github.com/mcssolutions
Ign http://ftp.us.debian.org jessie InRelease

dpkg-dev : Depends: libdpkg-perl (= 1.18.24~bpo8) but it is not going to be installed

        Depends: tar (>= 1.28-1) but 1.27.1-2+deb8u1 is to be installed

As this mirror was somehow broken on your last apt update, APT tried to install build-essential from backports. But it does not by itself choose also the dependencies from backports, thus fail.
I personally would, if not necessary, stay without backports. Thus try to manually purge the installed packages again:

• apt-get purge dpkg-dev build-essential
• Then try to find a running APT mirror. Try http://deb.debian.org/debian/, which is a mirror director and should always find a running server. Then do apt update again and assure that is says Get http://deb.debian.org jessie instead of Ign ....
• If this works, then reinstall build-essentials via dietpi-software.
• Alternatively at your current stage, you could force APT to get the package and all dependencies from backports: apt-get install -y -t jessie-backports build-essential and then rerun installation via dietpi-software (which includes some other packages as well).

—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub https://github.com/Fourdee/DietPi/issues/1425#issuecomment-361106481 , or mute the thread https://github.com/notifications/unsubscribe-auth/ABaX-1xn-6Wc_zNC5OcQLXxI1kVvFl3aks5tPQLbgaJpZM4Ru9Eb . https://github.com/notifications/beacon/ABaX-5nCY5l1LsMA3TP02y8dTSObOGfuks5tPQLbgaJpZM4Ru9Eb.gif

[MichaIng]

@mcsSolutions
Ah the LD_LIBRARY_PATH issue. At least the mirrors are all reachable now:

unset LD_LIBRARY_PATH
apt install build-essential

If an error about missing dependencies appears, then it somehow already remembers backports to be installed, then do:
apt install -y -t jessie-backports build-essential

[k-plan]

Yes, as I mention before, old DietPi v159 image

unset LD_LIBRARY_PATH
ldconfig -v

To get it work durable, you have to fix export in/etc/bash.bashrc

[mcsSolutions]

Unset LD_LIBRARY_PATH corrected the problem

I started this process about a week ago with Odroid C1 DietPi with the zip from the DiepPi web page. Seems odd that my version was considered old. I noticed that first thing on the downloaded image it did after login was update the version.

I repeated the download, install, build-essential selection today after the issue was resolved and the DietPi/dietpi/.version shows as two lines( 6 then 1). Uname gives 3.10.107 vs. last week’s report of 3.10.104. I had no issues today with build-essential.

From my perspective the issues is resolved.

Thank you for the rapid resolution.

From: k-plan [mailto:[email protected]]
Sent: Monday, January 29, 2018 10:47 AM
To: Fourdee/DietPi
Cc: mcsSolutions; Mention
Subject: Re: [Fourdee/DietPi] Build-essential apt-get failed on Odroid C1 (#1425)

Yes, as I mention before, old DietPi v159 image

unset LD_LIBRARY_PATH
ldconfig -v

To get it work durable, you have to fix export in/etc/bash.bashrc

—
You are receiving this because you were mentioned.
Reply to this email directly, view it on GitHub https://github.com/Fourdee/DietPi/issues/1425#issuecomment-361345719 , or mute the thread https://github.com/notifications/unsubscribe-auth/ABaX-4JH4hWU1EYHenuuBiVDX02Ff2Lrks5tPhI7gaJpZM4Ru9Eb . https://github.com/notifications/beacon/ABaX-wU2d19wwcrcO7Vj5Ml6nQ49SXIRks5tPhI7gaJpZM4Ru9Eb.gif

[k-plan]

From my perspective the issues is resolved.

:+1:

I'll mark as closed, latest image will resolve the issue, however, please re-open if required.