Deconz-rest-plugin: Blitzwolf BW-SHP13

[SkyThes]

Device

• Product name: Blitzwolf BW-SHP13
• Manufacturer: _TZ3000_3ooaz3ng
• Model identifier: TS0121
• Device type:
  
  
  
  • [ ] Light
  
  
  • [ ] Lock
  
  
  • [ ] Remote
  
  
  • [x] Sensor
  
  
  • [ ] Siren
  
  
  • [ ] Thermostat
  
  
  • [ ] Other:
  
  

Screenshots

If you need more info let me know!

[SwoopX]

Thanks for raising the request. Could you please apply a load to the plug and let it run for some time? Unfortunately, I cannot deduce the measurement units undoubtly.

So I need the last 2 screenshots once again after some time a load has been applied and please take then while the load is still applied.

[SkyThes]

Just took those screenshots with a load (laptop charger) connected for almost a hour.

[SwoopX]

Thanks. Ok, so for power, we use the raw values as I thought.

However, for instantaneous demand the value of 1 feels just wrong, considering the applied load. If it would be 1kWh, that would be way too high. 1Wh can also not be. Based on that, I assume we need to apply a multiplier.

If it jumps to 2 any time soon, I'd assume the measurement unit is dWh...

[SkyThes]

You mean the Current Summation Delivered (id 0x0000)? This value actually jumped to 2 in the last couple of minutes.
If you want to be sure I will be able to connect a known load (stable current drawing device) tomorrow for a specific amount of time so we can calculate how the values should be interpreted.

[SwoopX]

That would be awesome!

[SwoopX]

Hm, interestingly, seems to be the exact same device as here https://github.com/dresden-elektronik/deconz-rest-plugin/issues/2677

[SkyThes]

That would be awesome!

I just connected a 200W load (4x 50W halogen bulbs) for exactly 15min to the plug. This are the values when I turned on the load:

This are the values after 15min:

This load is using 0,2kWh so I used 0,05kW in this 15min. The Current Summation Delivered went from 3 to 8 so I think it is safe to say that this value represents 0,01kWh or 10Wh.

[SwoopX]

Cool, thanks for checking out. Already took that assumption with my commit.

[tekgator]

Is there anything we can contribute to get it working? The SHP13 connected successfully but only on/off is possible in Home Assistant. Load etc. is not available.

[SwoopX]

Wait for the next release

[J05HI]

How to pair it?
Is it a Switch -> Other?

[jvyoralek]

I added it as light and it works. But only on/off functionality is available for now so waiting for the next release.

[SwoopX]

Closing this as device is now supported with .79 beta.

[jvyoralek]

I've updated deCONZ version to 2.05.79 and consumption in kWh + power in W are available in HA now what is amazing!

The only minor issue remains - Manufacturer name is still _TZ3000_3ooazng and version contains a crazy value.

Thanks for the great work already!

[Webserve]

@jvyoralek i removed the old entity and now the right info is showed

[darkhaek87]

Hey @SwoopX I have one question: Rest-API support is not provided for this Smart plug, right? Because the smart plug is not listed neither as lights nor as sensors.

How can I help to get it into Rest-API?

My cconfiguration is:
RaspBee: 0x26370500
deCONZ: V2_05_82 (i also tried V2_05_79)

[Mimiix]

@darkhaek87 Hey!

I've got this in use with HA. So it does show with the rest-api in some way.

[darkhaek87]

@Mimiix I wonder why it works with HA, but reading the Rest-API for example with Firefox REST Client I did not find the smart plug.

FYI: For my automation I use Node Red.

[Mimiix]

@morfei1 could help

[morfei1]

@darkhaek87 If the plug is paired correctly to deCONZ it should be visable in the rest-api. I have 4 of them.

Plug itself is visable in ..../lights
It's 2 senors are visible in .../sensors
in the rest-api

If your NodeRed is paired correctly to deCONZ, the plug will be visable in the deCONZ nodes with it's phoscon name.
Note that the plug sensors are visable with their default names TS....something. You can't change their names nigher in phoscon nor in deCONZ. You can only change them in the rest-api.

If you are able to control your other deCONZ devices in NodeRed your connection is ok, and it seems the plug is not paired or not paired correctly. You can check that in deCONZ. The simple way to resolve this is to reset the plug and hit the search button in phoscon for another try. If you don't see any of you devices in the NodeRed, there is no konection between deCONZ and NR.

[morfei1]

The only minor issue remains - Manufacturer name is still _TZ3000_3ooazng and version contains a crazy value.

Thanks for the great work already!

@jvyoralek This is actually the correct name of the plug, IMHO. At first it's always Heiman, but if you read the basic cluster of it's node in deCONZ it will change to TZ3000 something.

[CarJu]

Hello!
I use 2.05.83 and I also can only connect to the "Light". There is no sensor in the list.
What am I doing wrong?
Vendor in my case is Heiman,

Thank you!

[SwoopX]

Which list? You wont see anything else in Phoscon. The REST API tells you what is available.

If you have no corresponding sensors in the API, enter sensor search in Phoscon, apply a load to the plug and switch the plug on. That should do the trick.