Deconz-rest-plugin: Hive door sensors and active plugs.

[donpearson]

Any chance I could get the hive door sensors working with the conbee 2 deCONZ?
https://zigbee.blakadder.com/Hive_DWS003.html

Just got my cobee today hoping it would work and clearly not…

I know it works with the hive motion sensors.
https://zigbee.blakadder.com/Hive_MOT003.html

Also the hive active plugs as well, any way I can get them working?
https://zigbee.blakadder.com/Hive_1613V.html

Or am I going to have to get Zigbee2mqtt running as well, I’d rather not as I’ve just get this nice expensive £40 cobee 2 when the cheap one seems to do everything I want.

Looks like I’m going to send the cobee back and get the cheap cc2531 instead.
Thanks for your help.

[SwoopX]

Please check the wiki first for supported devices. If they're not available, iissue a device support request which is also described there.

You'd need to be available for providing some information and do some testing then. However, the devices should be able to pair correctly, even if not yet supported, but not fully usable.

[manup]

Hi, supported sensors are listed in the Wiki:

https://github.com/dresden-elektronik/deconz-rest-plugin/wiki/Supported-Devices

Plugs usually fall into the generic supported category and should join when searching for lights.

Note: ConBee II can be used with zigbee2mqtt:
https://github.com/Koenkk/zigbee-herdsman/issues/72

[donpearson]

You'd need to be available for providing some information and do some testing then. However, the devices should be able to pair correctly, even if not yet supported, but not fully usable.

I can’t get the sensors to be pair at all.
What information do you need?

[donpearson]

Hi, supported sensors are listed in the Wiki:

https://github.com/dresden-elektronik/deconz-rest-plugin/wiki/Supported-Devices

Plugs usually fall into the generic supported category and should join when searching for lights.

Note: ConBee II can be used with zigbee2mqtt:
Koenkk/zigbee-herdsman#72

The problem I see with it is it says this in zigbee2mqtt-
Deprecation warning
This add-on is in a deprecated state!

[Mimiix]

I have no clue what addon you are speaking about or where that message pops up.

However, Blakadder's site isn't maintained by DE. The official list contains supported devices. The only device that should work is the motion sensor. The user requesting it confirmed it works since 0.76: https://github.com/dresden-elektronik/deconz-rest-plugin/issues/2606

If you want to have another device integrated, please read this wiki page:
https://github.com/dresden-elektronik/deconz-rest-plugin/wiki/Request-Device-Support

[donpearson]

I have no clue what addon you are speaking about or where that message pops up.

However, Blakadder's site isn't maintained by DE. The official list contains supported devices. The only device that should work is the motion sensor. The user requesting it confirmed it works since 0.76: #2606

If you want to have another device integrated, please read this wiki page:
https://github.com/dresden-elektronik/deconz-rest-plugin/wiki/Request-Device-Support

No need to worry about the sites I gave, I know they have nothing to do with DE..
I was just using then to show the devises I’m talking about.
I’m not asking about the motion sensor as I said In my original post I know that’s working.
I’m talking about the door sensors.

[Mimiix]

I have no clue what addon you are speaking about or where that message pops up.
However, Blakadder's site isn't maintained by DE. The official list contains supported devices. The only device that should work is the motion sensor. The user requesting it confirmed it works since 0.76: #2606
If you want to have another device integrated, please read this wiki page:
https://github.com/dresden-elektronik/deconz-rest-plugin/wiki/Request-Device-Support

No need to worry about the sites I gave, I know they have nothing to do with DE..
I was just using then to show the devises I’m talking about.
I’m not asking about the motion sensor as I said In my original post I know that’s working.
I’m talking about the door sensors.

Fair enough :)

Then you need to follow https://github.com/dresden-elektronik/deconz-rest-plugin/wiki/Request-Device-Support and create a request :)

[donpearson]

So I have the plugs working so no need to worry about that.
I’m going to close this post and make a new one for the motion sensor that I can’t get connected and it’s supported, if we solve that then maybe the rest will follow.
Thanks