Deconz-rest-plugin: Support for Wireless Temperature and Humidity Detector / Sensor

[G3rry71]

I am running ConBee II, Deconz Addon in HASSIO and would like to know if this sensor is supported: https://www.aliexpress.com/item/4000578239423.html

Measured Value of Temp, battery and humidity looks correct in the attributes table.
but its still not possible to add it as a sensor in the phoscon web interface

Please let know how I can help!
Thanks

[SwoopX]

You must read the attributes before taking the screenshots. Additionally, please provide one of the node info panel.

[Darkwin101]

Ok I Try to help, i Have the same Sensor from Tuya

[G3rry71]

Here they are, thanks

[Sjonnie2018]

Ok I Try to help, i Have the same Sensor from Tuya

@Darkwin101: So you are saying the device is found and supported in Deconz REST api? I would like to know because I am thinking of buying the Blitzwolf version for my setup.

TIA

[Darkwin101]

No it is not supported i want to help with the screenshots
I bought this Sensor yesterday.

[Sjonnie2018]

Aha! Clear! I will postpone buying the sensor then😉

[SwoopX]

Guys, can you please provide another screenshot of the power configuration cluster but with the attributes read? Thanks!

[Darkwin101]

[G3rry71]

Here is mine:

[SwoopX]

@Darkwin101 Thanks! I'll provide a pull request soon.

[WhistleMaster]

@G3rry71 How is this device running so far ? Any issue ? Could you share your opinion on that sensor ? Thanks !

[mmychu]

I have the BlitzWolf version and is not discovered by Conbee2/deconz at this moment

[Darkwin101]

I have no Problem with the Tuya and the Blitzwolf Version in Deconz. It is not showing in Phoscon App but there it is not supportet at this Time

[mmychu]

Any chance to see this sensor in Home Assistant?

[Darkwin101]

i use openhab and there is no Problem with this Sensor since Version XXX...74

[SwoopX]

@mmychu Maybe you should try to re-pair the device. It should be visible in HA like any other sensor, if pairing has been successful.

[mmychu]

@SwoopX can you help me with pairing? I try keeping the top button for 5-10 seconds and don't see any new Node in VNC network. I always used PhosconApp discovery, first time doing by VNC.
Should I open network for new devices? How to do it in deconz GUI via VNC?

[SwoopX]

Always pair via Phoscon. Start sensor search and reset the device. Success should be indicated by a green message.

[mmychu]

@SwoopX works like a charm in Home Assistant. Thank you very much!

[G3rry71]

@G3rry71 How is this device running so far ? Any issue ? Could you share your opinion on that sensor ? Thanks !

Hi, it working correctly now! I can see it in HA and in VNC network. Still not showing up as a sensor in deCONZ Phoscon web interface.

Thanks a lot!

[SwoopX]

Nice. 👍

Can we close the issue then?

[mmychu]

Yes. Thank you

[G3rry71]

Thanks for supporting

[JMorell]

I have the eMylo version of this sensor and I can't find it in the Phoscon sensor detector: https://www.amazon.es/dp/B088K3HGZ4/ref=cm_sw_r_tw_dp_x_0lJqFbHDH9WSF

[SargonofAssyria]

I am using zigbee2mqtt and there is a bad update frequency of Temperature and Humidity.
Temperature is only updated if change is 0.7 degrees ore more and Humidity only if change is 2% or more.
I wonder if that is the same here and if not how it is solved.

[G3rry71]

@G3rry71 How is this device running so far ? Any issue ? Could you share your opinion on that sensor ? Thanks !

Hi @WhistleMaster , working very well, not an issue after months. I have temp, humidity and battery level in HomeAssistat

[easybeat]

I've got them but they seem to have different Firmware compared to the Blitzwolf device. The temperature change is only reported at a change > 0.7 degrees. The Blitzwolf reports temperature changes of 0.1 degrees.

Is there somewhere this can be set/configured?

Thanks for help.

Beat