Cura: Problems running on Unity due to Qt5 <-> DBusMenu
I use the ppa version from 'http://ppa.launchpad.net/thopiekar/cura/ubuntu'.
It does not start any more after upgrade.
I already deleted all cura folders in .cache, .config and .local.
Output on Startup:
`
2016-10-31 12:29:26,787 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin ConsoleLogger
2016-10-31 12:29:26,799 - INFO - /usr/lib/cura/plugins/CuraEngineBackend/CuraEngineBackend.py (__init__ [40]): Found CuraEngine at: /usr/bin/CuraEngine
2016-10-31 12:29:26,799 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin CuraEngineBackend
2016-10-31 12:29:26,804 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin WireframeView
2016-10-31 12:29:26,807 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin SimpleView
2016-10-31 12:29:26,822 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin RotateTool
2016-10-31 12:29:26,827 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin SelectionTool
2016-10-31 12:29:26,841 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin ScaleTool
2016-10-31 12:29:26,849 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin TranslateTool
2016-10-31 12:29:26,855 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin CameraTool
2016-10-31 12:29:26,861 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin MirrorTool
2016-10-31 12:29:26,867 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin LocalFileOutputDevice
2016-10-31 12:29:26,867 - WARNING - .../UM/PluginRegistry.py (loadPlugin [63]): Plugin ConsoleLogger was already loaded
2016-10-31 12:29:26,869 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin FileLogger
2016-10-31 12:29:26,872 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin STLWriter
2016-10-31 12:29:26,875 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin OBJReader
2016-10-31 12:29:26,878 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin OBJWriter
2016-10-31 12:29:26,881 - WARNING - /usr/lib/uranium/plugins/FileHandlers/STLReader/STLReader.py (
2016-10-31 12:29:26,882 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin STLReader
2016-10-31 12:29:26,889 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin 3MFWriter
2016-10-31 12:29:26,891 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin CuraProfileWriter
2016-10-31 12:29:26,921 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Plugin Doodle3D uses an incompatible API version, ignoring
2016-10-31 12:29:26,924 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin LayerView
2016-10-31 12:29:26,926 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin LegacyProfileReader
2016-10-31 12:29:26,928 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin ImageReader
2016-10-31 12:29:26,931 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin GCodeProfileReader
2016-10-31 12:29:26,934 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin MachineSettingsAction
2016-10-31 12:29:26,936 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin X3DReader
2016-10-31 12:29:26,937 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin AutoSave
2016-10-31 12:29:26,940 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin SolidView
2016-10-31 12:29:26,944 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin VersionUpgrade21to22
2016-10-31 12:29:26,946 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin XRayView
2016-10-31 12:29:26,953 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin USBPrinting
2016-10-31 12:29:26,957 - WARNING - .../UM/Preferences.py (getValue [70]): Tried to get the value of non-existing setting cura/active_mode.
2016-10-31 12:29:26,957 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin PerObjectSettingsTool
2016-10-31 12:29:26,967 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin XmlMaterialProfile
2016-10-31 12:29:26,970 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin ChangeLogPlugin
2016-10-31 12:29:26,971 - WARNING - .../UM/PluginRegistry.py (loadPlugin [63]): Plugin CuraEngineBackend was already loaded
2016-10-31 12:29:26,973 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin 3MFReader
2016-10-31 12:29:26,976 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin RemovableDriveOutputDevice
2016-10-31 12:29:26,979 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin CuraProfileReader
2016-10-31 12:29:26,983 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin UltimakerMachineActions
2016-10-31 12:29:26,989 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin SliceInfoPlugin
2016-10-31 12:29:26,991 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin GCodeWriter
2016-10-31 12:29:26,992 - INFO - .../UM/Qt/QtApplication.py (__init__ [39]): Command line arguments: {'file': [], 'disable-textures': False, 'external-backend': False, 'debug-mode': False}
2016-10-31 12:29:26,995 - DEBUG - /usr/lib/cura/plugins/USBPrinting/USBPrinterOutputDevice.py (_connect [298]): Attempting to connect to /dev/ttyACM2
2016-10-31 12:29:26,997 - DEBUG - /usr/lib/cura/plugins/USBPrinting/USBPrinterOutputDevice.py (_connect [298]): Attempting to connect to /dev/ttyACM1
2016-10-31 12:29:26,998 - DEBUG - /usr/lib/cura/plugins/USBPrinting/USBPrinterOutputDevice.py (_connect [298]): Attempting to connect to /dev/ttyACM0
2016-10-31 12:29:26,998 - INFO - .../UM/VersionUpgradeManager.py (upgrade [98]): Looking for old configuration files to upgrade.
2016-10-31 12:29:29,250 - DEBUG - .../UM/Backend/Backend.py (_logSocketState [165]): Socket state changed to Listening
2016-10-31 12:29:29,255 - INFO - .../UM/Backend/Backend.py (startEngine [55]): Started engine process: /usr/bin/CuraEngine
2016-10-31 12:29:29,256 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] Calling engine with: ['/usr/bin/CuraEngine', 'connect', '127.0.0.1:49674', '-j', '/usr/share/cura/resources/definitions/fdmprinter.def.json', '']
2016-10-31 12:29:29,257 - WARNING - .../UM/OutputDevice/OutputDeviceManager.py (removeOutputDevice [123]): Could not find output device with id /dev/ttyACM2 to remove
2016-10-31 12:29:29,257 - WARNING - .../UM/OutputDevice/OutputDeviceManager.py (removeOutputDevice [123]): Could not find output device with id /dev/ttyACM1 to remove
2016-10-31 12:29:29,257 - WARNING - .../UM/OutputDevice/OutputDeviceManager.py (removeOutputDevice [123]): Could not find output device with id /dev/ttyACM0 to remove
2016-10-31 12:29:29,259 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend]
2016-10-31 12:29:29,262 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] Cura_SteamEngine version DEV
2016-10-31 12:29:29,266 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] Copyright (C) 2014 David Braam
2016-10-31 12:29:29,267 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend]
2016-10-31 12:29:29,267 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] This program is free software: you can redistribute it and/or modify
2016-10-31 12:29:29,267 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] it under the terms of the GNU Affero General Public License as published by
2016-10-31 12:29:29,267 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] the Free Software Foundation, either version 3 of the License, or
2016-10-31 12:29:29,267 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] (at your option) any later version.
2016-10-31 12:29:29,268 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend]
2016-10-31 12:29:29,268 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] This program is distributed in the hope that it will be useful,
2016-10-31 12:29:29,268 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] but WITHOUT ANY WARRANTY; without even the implied warranty of
2016-10-31 12:29:29,268 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
2016-10-31 12:29:29,268 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] GNU Affero General Public License for more details.
2016-10-31 12:29:29,269 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend]
2016-10-31 12:29:29,269 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] You should have received a copy of the GNU Affero General Public License
2016-10-31 12:29:29,269 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] along with this program. If not, see http://www.gnu.org/licenses/.
2016-10-31 12:29:29,501 - WARNING - .../cura/MachineActionManager.py (addSupportedAction [68]): Unable to add DiscoverUM3Action to ultimaker3_extended, as the action is not recognised
2016-10-31 12:29:29,502 - WARNING - .../cura/MachineActionManager.py (addFirstStartAction [79]): Unable to add DiscoverUM3Action to ultimaker3_extended, as the action is not recognised
2016-10-31 12:29:29,502 - DEBUG - /usr/lib/cura/plugins/MachineSettingsAction/MachineSettingsAction.py (_onContainerAdded [40]): Not attaching MachineSettingsAction to ultimaker3_extended; Multi-extrusion printers are not supported
2016-10-31 12:29:29,707 - INFO - /usr/lib/cura/plugins/USBPrinting/USBPrinterOutputDevice.py (_connect [298]): Could not establish connection on /dev/ttyACM1: 'Timeout'. Device is not arduino based.
2016-10-31 12:29:29,708 - INFO - /usr/lib/cura/plugins/USBPrinting/USBPrinterOutputDevice.py (_connect [298]): Could not establish connection on /dev/ttyACM0: 'Timeout'. Device is not arduino based.
2016-10-31 12:29:29,785 - DEBUG - /usr/lib/cura/plugins/USBPrinting/USBPrinterOutputDevice.py (_connect [298]): Attempting to connect to printer with serial /dev/ttyACM1 on baud rate 115200
2016-10-31 12:29:29,786 - INFO - /usr/lib/cura/plugins/USBPrinting/USBPrinterOutputDevice.py (_connect [298]): Could not establish connection on /dev/ttyACM2: 'Timeout'. Device is not arduino based.
2016-10-31 12:29:29,786 - DEBUG - /usr/lib/cura/plugins/USBPrinting/USBPrinterOutputDevice.py (_connect [298]): Attempting to connect to printer with serial /dev/ttyACM0 on baud rate 115200
2016-10-31 12:29:29,835 - DEBUG - /usr/lib/cura/plugins/USBPrinting/USBPrinterOutputDevice.py (_connect [298]): Attempting to connect to printer with serial /dev/ttyACM2 on baud rate 115200
2016-10-31 12:29:29,929 - DEBUG - /usr/lib/cura/plugins/MachineSettingsAction/MachineSettingsAction.py (_onContainerAdded [40]): Not attaching MachineSettingsAction to ultimaker_original_dual; Multi-extrusion printers are not supported
2016-10-31 12:29:30,263 - DEBUG - /usr/lib/cura/plugins/MachineSettingsAction/MachineSettingsAction.py (_onContainerAdded [40]): Not attaching MachineSettingsAction to ultimaker2_extended_plus; Machines that use variants are not supported
2016-10-31 12:29:30,521 - DEBUG - /usr/lib/cura/plugins/MachineSettingsAction/MachineSettingsAction.py (_onContainerAdded [40]): Not attaching MachineSettingsAction to ultimaker2_plus; Machines that use variants are not supported
2016-10-31 12:29:30,552 - WARNING - .../cura/MachineActionManager.py (addSupportedAction [68]): Unable to add DiscoverUM3Action to ultimaker3, as the action is not recognised
2016-10-31 12:29:30,552 - WARNING - .../cura/MachineActionManager.py (addFirstStartAction [79]): Unable to add DiscoverUM3Action to ultimaker3, as the action is not recognised
2016-10-31 12:29:30,552 - DEBUG - /usr/lib/cura/plugins/MachineSettingsAction/MachineSettingsAction.py (_onContainerAdded [40]): Not attaching MachineSettingsAction to ultimaker3; Multi-extrusion printers are not supported
2016-10-31 12:29:35,013 - DEBUG - .../UM/Backend/Backend.py (_logSocketState [165]): Socket state changed to Connected
2016-10-31 12:29:35,014 - DEBUG - .../UM/Backend/Backend.py (_onSocketStateChanged [155]): Backend connected on port 49674
2016-10-31 12:29:35,015 - DEBUG - .../UM/Controller.py (setActiveView [80]): Setting active view to SolidView
2016-10-31 12:29:35,512 - DEBUG - .../UM/Qt/Bindings/Theme.py (load [118]): Loading theme file: /usr/share/cura/resources/themes/cura/theme.json
2016-10-31 12:29:35,588 - DEBUG - .../UM/Qt/Bindings/Theme.py (load [118]): Loaded theme /usr/share/cura/resources/themes/cura
QObject::connect: Parentheses expected, signal MainWindow::
QObject::connect: Parentheses expected, signal MainWindow::
QObject::connect: Parentheses expected, signal MainWindow::
2016-10-31 12:29:35,713 - WARNING - .../cura/Settings/ContainerManager.py (getContainerMetaDataEntry [171]): Could not get metadata of container because it was not found.
Speicherzugriffsfehler (Speicherabzug geschrieben)
`
argo2445
All 63 comments
@argo2445 Could you please do an system update? I just want to be sure we both use the same packages here.
thopiekar
on 1 Nov 2016
@thopiekar I just updated the system. The result semms to be the same.
Output:
2016-11-01 11:28:19,828 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin ConsoleLogger
2016-11-01 11:28:19,956 - INFO - /usr/lib/cura/plugins/CuraEngineBackend/CuraEngineBackend.py (init [40]): Found CuraEngine at: /usr/bin/CuraEngine
2016-11-01 11:28:19,958 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin CuraEngineBackend
2016-11-01 11:28:19,982 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin WireframeView
2016-11-01 11:28:19,985 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin SimpleView
2016-11-01 11:28:20,141 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin RotateTool
2016-11-01 11:28:20,144 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin SelectionTool
2016-11-01 11:28:20,152 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin ScaleTool
2016-11-01 11:28:20,158 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin TranslateTool
2016-11-01 11:28:20,164 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin CameraTool
2016-11-01 11:28:20,170 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin MirrorTool
2016-11-01 11:28:20,186 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin LocalFileOutputDevice
2016-11-01 11:28:20,186 - WARNING - .../UM/PluginRegistry.py (loadPlugin [63]): Plugin ConsoleLogger was already loaded
2016-11-01 11:28:20,188 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin FileLogger
2016-11-01 11:28:20,229 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin STLWriter
2016-11-01 11:28:20,232 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin OBJReader
2016-11-01 11:28:20,237 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin OBJWriter
2016-11-01 11:28:20,239 - WARNING - /usr/lib/uranium/plugins/FileHandlers/STLReader/STLReader.py (
2016-11-01 11:28:20,241 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin STLReader
2016-11-01 11:28:20,247 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin 3MFWriter
2016-11-01 11:28:20,256 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin CuraProfileWriter
2016-11-01 11:28:20,301 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Plugin Doodle3D uses an incompatible API version, ignoring
2016-11-01 11:28:20,337 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin LayerView
2016-11-01 11:28:20,339 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin LegacyProfileReader
2016-11-01 11:28:20,342 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin ImageReader
2016-11-01 11:28:20,343 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin GCodeProfileReader
2016-11-01 11:28:20,360 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin MachineSettingsAction
2016-11-01 11:28:20,386 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin X3DReader
2016-11-01 11:28:20,388 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin AutoSave
2016-11-01 11:28:20,390 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin SolidView
2016-11-01 11:28:20,408 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin VersionUpgrade21to22
2016-11-01 11:28:20,410 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin XRayView
2016-11-01 11:28:20,475 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin USBPrinting
2016-11-01 11:28:20,498 - WARNING - .../UM/Preferences.py (getValue [70]): Tried to get the value of non-existing setting cura/active_mode.
2016-11-01 11:28:20,498 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin PerObjectSettingsTool
2016-11-01 11:28:20,510 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin XmlMaterialProfile
2016-11-01 11:28:20,520 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin ChangeLogPlugin
2016-11-01 11:28:20,520 - WARNING - .../UM/PluginRegistry.py (loadPlugin [63]): Plugin CuraEngineBackend was already loaded
2016-11-01 11:28:20,534 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin 3MFReader
2016-11-01 11:28:20,538 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin RemovableDriveOutputDevice
2016-11-01 11:28:20,542 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin CuraProfileReader
2016-11-01 11:28:20,548 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin UltimakerMachineActions
2016-11-01 11:28:20,553 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin SliceInfoPlugin
2016-11-01 11:28:20,555 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin GCodeWriter
2016-11-01 11:28:20,556 - INFO - .../UM/Qt/QtApplication.py (init [39]): Command line arguments: {'file': [], 'debug-mode': False, 'external-backend': False, 'disable-textures': False}
2016-11-01 11:28:20,593 - DEBUG - /usr/lib/cura/plugins/USBPrinting/USBPrinterOutputDevice.py (_connect [298]): Attempting to connect to /dev/ttyACM2
2016-11-01 11:28:20,597 - DEBUG - /usr/lib/cura/plugins/USBPrinting/USBPrinterOutputDevice.py (_connect [298]): Attempting to connect to /dev/ttyACM1
2016-11-01 11:28:20,599 - DEBUG - /usr/lib/cura/plugins/USBPrinting/USBPrinterOutputDevice.py (_connect [298]): Attempting to connect to /dev/ttyACM0
2016-11-01 11:28:20,601 - INFO - .../UM/VersionUpgradeManager.py (upgrade [98]): Looking for old configuration files to upgrade.
2016-11-01 11:28:22,963 - INFO - /usr/lib/cura/plugins/USBPrinting/USBPrinterOutputDevice.py (_connect [298]): Could not establish connection on /dev/ttyACM2: 'Timeout'. Device is not arduino based.
2016-11-01 11:28:22,963 - INFO - /usr/lib/cura/plugins/USBPrinting/USBPrinterOutputDevice.py (_connect [298]): Could not establish connection on /dev/ttyACM0: 'Timeout'. Device is not arduino based.
2016-11-01 11:28:22,964 - INFO - /usr/lib/cura/plugins/USBPrinting/USBPrinterOutputDevice.py (_connect [298]): Could not establish connection on /dev/ttyACM1: 'Timeout'. Device is not arduino based.
2016-11-01 11:28:22,993 - DEBUG - /usr/lib/cura/plugins/USBPrinting/USBPrinterOutputDevice.py (_connect [298]): Attempting to connect to printer with serial /dev/ttyACM2 on baud rate 115200
2016-11-01 11:28:23,001 - DEBUG - /usr/lib/cura/plugins/USBPrinting/USBPrinterOutputDevice.py (_connect [298]): Attempting to connect to printer with serial /dev/ttyACM0 on baud rate 115200
2016-11-01 11:28:23,001 - DEBUG - /usr/lib/cura/plugins/USBPrinting/USBPrinterOutputDevice.py (_connect [298]): Attempting to connect to printer with serial /dev/ttyACM1 on baud rate 115200
2016-11-01 11:28:24,429 - DEBUG - .../UM/Backend/Backend.py (_logSocketState [165]): Socket state changed to Listening
2016-11-01 11:28:24,440 - INFO - .../UM/Backend/Backend.py (startEngine [55]): Started engine process: /usr/bin/CuraEngine
2016-11-01 11:28:24,441 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] Calling engine with: ['/usr/bin/CuraEngine', 'connect', '127.0.0.1:49674', '-j', '/usr/share/cura/resources/definitions/fdmprinter.def.json', '']
2016-11-01 11:28:24,442 - WARNING - .../UM/OutputDevice/OutputDeviceManager.py (removeOutputDevice [123]): Could not find output device with id /dev/ttyACM2 to remove
2016-11-01 11:28:24,442 - WARNING - .../UM/OutputDevice/OutputDeviceManager.py (removeOutputDevice [123]): Could not find output device with id /dev/ttyACM1 to remove
2016-11-01 11:28:24,443 - WARNING - .../UM/OutputDevice/OutputDeviceManager.py (removeOutputDevice [123]): Could not find output device with id /dev/ttyACM0 to remove
2016-11-01 11:28:24,568 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend]
2016-11-01 11:28:24,569 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] Cura_SteamEngine version DEV
2016-11-01 11:28:24,569 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] Copyright (C) 2014 David Braam
2016-11-01 11:28:24,569 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend]
2016-11-01 11:28:24,570 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] This program is free software: you can redistribute it and/or modify
2016-11-01 11:28:24,570 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] it under the terms of the GNU Affero General Public License as published by
2016-11-01 11:28:24,570 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] the Free Software Foundation, either version 3 of the License, or
2016-11-01 11:28:24,571 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): Backend any later version.
2016-11-01 11:28:24,571 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend]
2016-11-01 11:28:24,571 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] This program is distributed in the hope that it will be useful,
2016-11-01 11:28:24,571 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] but WITHOUT ANY WARRANTY; without even the implied warranty of
2016-11-01 11:28:24,572 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
2016-11-01 11:28:24,572 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] GNU Affero General Public License for more details.
2016-11-01 11:28:24,572 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend]
2016-11-01 11:28:24,573 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] You should have received a copy of the GNU Affero General Public License
2016-11-01 11:28:24,573 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] along with this program. If not, see http://www.gnu.org/licenses/.
2016-11-01 11:28:24,613 - WARNING - .../cura/MachineActionManager.py (addSupportedAction [68]): Unable to add DiscoverUM3Action to ultimaker3, as the action is not recognised
2016-11-01 11:28:24,613 - WARNING - .../cura/MachineActionManager.py (addFirstStartAction [79]): Unable to add DiscoverUM3Action to ultimaker3, as the action is not recognised
2016-11-01 11:28:24,614 - DEBUG - /usr/lib/cura/plugins/MachineSettingsAction/MachineSettingsAction.py (_onContainerAdded [40]): Not attaching MachineSettingsAction to ultimaker3; Multi-extrusion printers are not supported
2016-11-01 11:28:24,648 - WARNING - .../cura/MachineActionManager.py (addSupportedAction [68]): Unable to add DiscoverUM3Action to ultimaker3_extended, as the action is not recognised
2016-11-01 11:28:24,649 - WARNING - .../cura/MachineActionManager.py (addFirstStartAction [79]): Unable to add DiscoverUM3Action to ultimaker3_extended, as the action is not recognised
2016-11-01 11:28:24,649 - DEBUG - /usr/lib/cura/plugins/MachineSettingsAction/MachineSettingsAction.py (_onContainerAdded [40]): Not attaching MachineSettingsAction to ultimaker3_extended; Multi-extrusion printers are not supported
2016-11-01 11:28:25,251 - DEBUG - /usr/lib/cura/plugins/MachineSettingsAction/MachineSettingsAction.py (_onContainerAdded [40]): Not attaching MachineSettingsAction to ultimaker_original_dual; Multi-extrusion printers are not supported
2016-11-01 11:28:25,918 - DEBUG - /usr/lib/cura/plugins/MachineSettingsAction/MachineSettingsAction.py (_onContainerAdded [40]): Not attaching MachineSettingsAction to ultimaker2_extended_plus; Machines that use variants are not supported
2016-11-01 11:28:26,073 - DEBUG - /usr/lib/cura/plugins/MachineSettingsAction/MachineSettingsAction.py (_onContainerAdded [40]): Not attaching MachineSettingsAction to ultimaker2_plus; Machines that use variants are not supported
2016-11-01 11:28:29,512 - DEBUG - /usr/lib/cura/plugins/USBPrinting/USBPrinterOutputDevice.py (_connect [298]): Attempting to connect to printer with serial /dev/ttyACM1 on baud rate 250000
2016-11-01 11:28:29,513 - DEBUG - /usr/lib/cura/plugins/USBPrinting/USBPrinterOutputDevice.py (_connect [298]): Attempting to connect to printer with serial /dev/ttyACM0 on baud rate 250000
2016-11-01 11:28:29,523 - DEBUG - /usr/lib/cura/plugins/USBPrinting/USBPrinterOutputDevice.py (_connect [298]): Attempting to connect to printer with serial /dev/ttyACM2 on baud rate 250000
2016-11-01 11:28:30,332 - DEBUG - .../UM/Backend/Backend.py (_logSocketState [165]): Socket state changed to Connected
2016-11-01 11:28:30,332 - DEBUG - .../UM/Backend/Backend.py (_onSocketStateChanged [155]): Backend connected on port 49674
2016-11-01 11:28:30,332 - DEBUG - .../UM/Controller.py (setActiveView [80]): Setting active view to SolidView
2016-11-01 11:28:31,826 - DEBUG - .../UM/Qt/Bindings/Theme.py (load [118]): Loading theme file: /usr/share/cura/resources/themes/cura/theme.json
2016-11-01 11:28:31,929 - DEBUG - .../UM/Qt/Bindings/Theme.py (load [118]): Loaded theme /usr/share/cura/resources/themes/cura
QObject::connect: Parentheses expected, signal MainWindow::
QObject::connect: Parentheses expected, signal MainWindow::
QObject::connect: Parentheses expected, signal MainWindow::
2016-11-01 11:28:32,074 - WARNING - .../cura/Settings/ContainerManager.py (getContainerMetaDataEntry [171]): Could not get metadata of container because it was not found.
Speicherzugriffsfehler (Speicherabzug geschrieben)
argo2445
on 1 Nov 2016
Speicherzugriffsfehler means it's a memory error. A segfault, it seems.
Ghostkeeper
on 1 Nov 2016
I always had this message here since we've started to work on 2.0.x.
At the beginning it wasn't appearing every time, but now it appears every time I close Cura.
So in my opinion this seg. fault isn't the problem here.
Prepared my master PPA to work with the debug version of Python. I'll try to experiment on this later.
But back to the problem here. What I personally miss here is the message about OpenGL being loaded..
@argo2445 Could you please take a terminal and type in: glxinfo | grep -i "OpenGL version string:"
thopiekar
on 1 Nov 2016
$ glxinfo | grep -i "OpenGL version string:"
OpenGL version string: 3.0 Mesa 12.0.3
argo2445
on 1 Nov 2016
And glxinfo | grep -i "opengl"?
thopiekar
on 1 Nov 2016
$ glxinfo | grep -i "opengl"
OpenGL vendor string: Intel Open Source Technology Center
OpenGL renderer string: Mesa DRI Intel(R) Ivybridge Mobile
OpenGL core profile version string: 3.3 (Core Profile) Mesa 12.0.3
OpenGL core profile shading language version string: 3.30
OpenGL core profile context flags: (none)
OpenGL core profile profile mask: core profile
OpenGL core profile extensions:
OpenGL version string: 3.0 Mesa 12.0.3
OpenGL shading language version string: 1.30
OpenGL context flags: (none)
OpenGL extensions:
OpenGL ES profile version string: OpenGL ES 3.0 Mesa 12.0.3
OpenGL ES profile shading language version string: OpenGL ES GLSL ES 3.00
OpenGL ES profile extensions:
argo2445
on 1 Nov 2016
Great, thanks! Intel GPU and opensource drivers :+1:
So let's run Cura without your drivers, but using software rendering by: LIBGL_ALWAYS_SOFTWARE=1 cura
thopiekar
on 1 Nov 2016
It is crashing again. Seems to be the same :(.
Output:
$ LIBGL_ALWAYS_SOFTWARE=1 cura
2016-11-01 12:01:28,745 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin ConsoleLogger
2016-11-01 12:01:28,755 - INFO - /usr/lib/cura/plugins/CuraEngineBackend/CuraEngineBackend.py (init [40]): Found CuraEngine at: /usr/bin/CuraEngine
2016-11-01 12:01:28,755 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin CuraEngineBackend
2016-11-01 12:01:28,760 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin WireframeView
2016-11-01 12:01:28,762 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin SimpleView
2016-11-01 12:01:28,772 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin RotateTool
2016-11-01 12:01:28,777 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin SelectionTool
2016-11-01 12:01:28,785 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin ScaleTool
2016-11-01 12:01:28,791 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin TranslateTool
2016-11-01 12:01:28,795 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin CameraTool
2016-11-01 12:01:28,800 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin MirrorTool
2016-11-01 12:01:28,803 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin LocalFileOutputDevice
2016-11-01 12:01:28,804 - WARNING - .../UM/PluginRegistry.py (loadPlugin [63]): Plugin ConsoleLogger was already loaded
2016-11-01 12:01:28,806 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin FileLogger
2016-11-01 12:01:28,810 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin STLWriter
2016-11-01 12:01:28,813 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin OBJReader
2016-11-01 12:01:28,816 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin OBJWriter
2016-11-01 12:01:28,818 - WARNING - /usr/lib/uranium/plugins/FileHandlers/STLReader/STLReader.py (
2016-11-01 12:01:28,819 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin STLReader
2016-11-01 12:01:28,826 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin 3MFWriter
2016-11-01 12:01:28,828 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin CuraProfileWriter
2016-11-01 12:01:28,857 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Plugin Doodle3D uses an incompatible API version, ignoring
2016-11-01 12:01:28,860 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin LayerView
2016-11-01 12:01:28,861 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin LegacyProfileReader
2016-11-01 12:01:28,863 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin ImageReader
2016-11-01 12:01:28,865 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin GCodeProfileReader
2016-11-01 12:01:28,868 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin MachineSettingsAction
2016-11-01 12:01:28,871 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin X3DReader
2016-11-01 12:01:28,873 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin AutoSave
2016-11-01 12:01:28,875 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin SolidView
2016-11-01 12:01:28,877 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin VersionUpgrade21to22
2016-11-01 12:01:28,879 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin XRayView
2016-11-01 12:01:28,886 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin USBPrinting
2016-11-01 12:01:28,889 - WARNING - .../UM/Preferences.py (getValue [70]): Tried to get the value of non-existing setting cura/active_mode.
2016-11-01 12:01:28,889 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin PerObjectSettingsTool
2016-11-01 12:01:28,899 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin XmlMaterialProfile
2016-11-01 12:01:28,902 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin ChangeLogPlugin
2016-11-01 12:01:28,903 - WARNING - .../UM/PluginRegistry.py (loadPlugin [63]): Plugin CuraEngineBackend was already loaded
2016-11-01 12:01:28,905 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin 3MFReader
2016-11-01 12:01:28,907 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin RemovableDriveOutputDevice
2016-11-01 12:01:28,910 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin CuraProfileReader
2016-11-01 12:01:28,914 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin UltimakerMachineActions
2016-11-01 12:01:28,919 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin SliceInfoPlugin
2016-11-01 12:01:28,921 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin GCodeWriter
2016-11-01 12:01:28,922 - INFO - .../UM/Qt/QtApplication.py (init [39]): Command line arguments: {'disable-textures': False, 'file': [], 'external-backend': False, 'debug-mode': False}
2016-11-01 12:01:28,925 - DEBUG - /usr/lib/cura/plugins/USBPrinting/USBPrinterOutputDevice.py (_connect [298]): Attempting to connect to /dev/ttyACM2
2016-11-01 12:01:28,927 - DEBUG - /usr/lib/cura/plugins/USBPrinting/USBPrinterOutputDevice.py (_connect [298]): Attempting to connect to /dev/ttyACM1
2016-11-01 12:01:28,938 - DEBUG - /usr/lib/cura/plugins/USBPrinting/USBPrinterOutputDevice.py (_connect [298]): Attempting to connect to /dev/ttyACM0
2016-11-01 12:01:28,939 - INFO - .../UM/VersionUpgradeManager.py (upgrade [98]): Looking for old configuration files to upgrade.
2016-11-01 12:01:31,108 - DEBUG - .../UM/Backend/Backend.py (_logSocketState [165]): Socket state changed to Listening
2016-11-01 12:01:31,114 - INFO - .../UM/Backend/Backend.py (startEngine [55]): Started engine process: /usr/bin/CuraEngine
2016-11-01 12:01:31,115 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] Calling engine with: ['/usr/bin/CuraEngine', 'connect', '127.0.0.1:49674', '-j', '/usr/share/cura/resources/definitions/fdmprinter.def.json', '']
2016-11-01 12:01:31,116 - WARNING - .../UM/OutputDevice/OutputDeviceManager.py (removeOutputDevice [123]): Could not find output device with id /dev/ttyACM2 to remove
2016-11-01 12:01:31,116 - WARNING - .../UM/OutputDevice/OutputDeviceManager.py (removeOutputDevice [123]): Could not find output device with id /dev/ttyACM1 to remove
2016-11-01 12:01:31,116 - WARNING - .../UM/OutputDevice/OutputDeviceManager.py (removeOutputDevice [123]): Could not find output device with id /dev/ttyACM0 to remove
2016-11-01 12:01:31,116 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend]
2016-11-01 12:01:31,117 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] Cura_SteamEngine version DEV
2016-11-01 12:01:31,117 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] Copyright (C) 2014 David Braam
2016-11-01 12:01:31,117 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend]
2016-11-01 12:01:31,118 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] This program is free software: you can redistribute it and/or modify
2016-11-01 12:01:31,118 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] it under the terms of the GNU Affero General Public License as published by
2016-11-01 12:01:31,120 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] the Free Software Foundation, either version 3 of the License, or
2016-11-01 12:01:31,121 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): Backend any later version.
2016-11-01 12:01:31,121 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend]
2016-11-01 12:01:31,121 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] This program is distributed in the hope that it will be useful,
2016-11-01 12:01:31,122 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] but WITHOUT ANY WARRANTY; without even the implied warranty of
2016-11-01 12:01:31,122 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
2016-11-01 12:01:31,122 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] GNU Affero General Public License for more details.
2016-11-01 12:01:31,122 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend]
2016-11-01 12:01:31,123 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] You should have received a copy of the GNU Affero General Public License
2016-11-01 12:01:31,123 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] along with this program. If not, see http://www.gnu.org/licenses/.
2016-11-01 12:01:31,124 - DEBUG - .../UM/Backend/Backend.py (_logSocketState [165]): Socket state changed to Connected
2016-11-01 12:01:31,125 - DEBUG - .../UM/Backend/Backend.py (_onSocketStateChanged [155]): Backend connected on port 49674
2016-11-01 12:01:31,305 - WARNING - .../cura/MachineActionManager.py (addSupportedAction [68]): Unable to add DiscoverUM3Action to ultimaker3, as the action is not recognised
2016-11-01 12:01:31,306 - WARNING - .../cura/MachineActionManager.py (addFirstStartAction [79]): Unable to add DiscoverUM3Action to ultimaker3, as the action is not recognised
2016-11-01 12:01:31,306 - DEBUG - /usr/lib/cura/plugins/MachineSettingsAction/MachineSettingsAction.py (_onContainerAdded [40]): Not attaching MachineSettingsAction to ultimaker3; Multi-extrusion printers are not supported
2016-11-01 12:01:31,641 - INFO - /usr/lib/cura/plugins/USBPrinting/USBPrinterOutputDevice.py (_connect [298]): Could not establish connection on /dev/ttyACM2: 'Timeout'. Device is not arduino based.
2016-11-01 12:01:31,641 - DEBUG - /usr/lib/cura/plugins/USBPrinting/USBPrinterOutputDevice.py (_connect [298]): Attempting to connect to printer with serial /dev/ttyACM2 on baud rate 115200
2016-11-01 12:01:31,642 - INFO - /usr/lib/cura/plugins/USBPrinting/USBPrinterOutputDevice.py (_connect [298]): Could not establish connection on /dev/ttyACM0: 'Timeout'. Device is not arduino based.
2016-11-01 12:01:31,659 - INFO - /usr/lib/cura/plugins/USBPrinting/USBPrinterOutputDevice.py (_connect [298]): Could not establish connection on /dev/ttyACM1: 'Timeout'. Device is not arduino based.
2016-11-01 12:01:31,659 - DEBUG - /usr/lib/cura/plugins/USBPrinting/USBPrinterOutputDevice.py (_connect [298]): Attempting to connect to printer with serial /dev/ttyACM0 on baud rate 115200
2016-11-01 12:01:31,684 - DEBUG - /usr/lib/cura/plugins/USBPrinting/USBPrinterOutputDevice.py (_connect [298]): Attempting to connect to printer with serial /dev/ttyACM1 on baud rate 115200
2016-11-01 12:01:31,999 - DEBUG - /usr/lib/cura/plugins/MachineSettingsAction/MachineSettingsAction.py (_onContainerAdded [40]): Not attaching MachineSettingsAction to ultimaker2_extended_plus; Machines that use variants are not supported
2016-11-01 12:01:32,116 - DEBUG - /usr/lib/cura/plugins/MachineSettingsAction/MachineSettingsAction.py (_onContainerAdded [40]): Not attaching MachineSettingsAction to ultimaker2_plus; Machines that use variants are not supported
2016-11-01 12:01:32,148 - DEBUG - /usr/lib/cura/plugins/MachineSettingsAction/MachineSettingsAction.py (_onContainerAdded [40]): Not attaching MachineSettingsAction to ultimaker_original_dual; Multi-extrusion printers are not supported
2016-11-01 12:01:32,315 - WARNING - .../cura/MachineActionManager.py (addSupportedAction [68]): Unable to add DiscoverUM3Action to ultimaker3_extended, as the action is not recognised
2016-11-01 12:01:32,315 - WARNING - .../cura/MachineActionManager.py (addFirstStartAction [79]): Unable to add DiscoverUM3Action to ultimaker3_extended, as the action is not recognised
2016-11-01 12:01:32,315 - DEBUG - /usr/lib/cura/plugins/MachineSettingsAction/MachineSettingsAction.py (_onContainerAdded [40]): Not attaching MachineSettingsAction to ultimaker3_extended; Multi-extrusion printers are not supported
2016-11-01 12:01:36,566 - DEBUG - .../UM/Controller.py (setActiveView [80]): Setting active view to SolidView
2016-11-01 12:01:37,138 - DEBUG - .../UM/Qt/Bindings/Theme.py (load [118]): Loading theme file: /usr/share/cura/resources/themes/cura/theme.json
2016-11-01 12:01:37,219 - DEBUG - .../UM/Qt/Bindings/Theme.py (load [118]): Loaded theme /usr/share/cura/resources/themes/cura
QObject::connect: Parentheses expected, signal MainWindow::
QObject::connect: Parentheses expected, signal MainWindow::
QObject::connect: Parentheses expected, signal MainWindow::
2016-11-01 12:01:37,330 - WARNING - .../cura/Settings/ContainerManager.py (getContainerMetaDataEntry [171]): Could not get metadata of container because it was not found.
Speicherzugriffsfehler (Speicherabzug geschrieben)
argo2445
on 1 Nov 2016
@Ghostkeeper, just a little update. Now the segmentation fault is away again..
thopiekar@hp:~$ LIBGL_ALWAYS_SOFTWARE=1 cura
2016-11-01 12:05:16,560 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin ConsoleLogger
2016-11-01 12:05:16,696 - INFO - /usr/lib/cura/plugins/CuraEngineBackend/CuraEngineBackend.py (__init__ [40]): Found CuraEngine at: /usr/bin/CuraEngine
2016-11-01 12:05:16,711 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin CuraEngineBackend
2016-11-01 12:05:16,752 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin LocalFileOutputDevice
2016-11-01 12:05:16,753 - WARNING - .../UM/PluginRegistry.py (loadPlugin [63]): Plugin ConsoleLogger was already loaded
2016-11-01 12:05:16,758 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin FileLogger
2016-11-01 12:05:16,824 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin TranslateTool
2016-11-01 12:05:16,849 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin ScaleTool
2016-11-01 12:05:16,855 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin CameraTool
2016-11-01 12:05:16,898 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin MirrorTool
2016-11-01 12:05:16,912 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin RotateTool
2016-11-01 12:05:16,917 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin SelectionTool
2016-11-01 12:05:16,945 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin OBJWriter
2016-11-01 12:05:17,021 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin 3MFWriter
2016-11-01 12:05:17,024 - WARNING - /usr/lib/uranium/plugins/FileHandlers/STLReader/STLReader.py (<module> [5]): Could not find numpy-stl, falling back to slower code.
2016-11-01 12:05:17,026 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin STLReader
2016-11-01 12:05:17,033 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin STLWriter
2016-11-01 12:05:17,040 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin OBJReader
2016-11-01 12:05:17,045 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin WireframeView
2016-11-01 12:05:17,050 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin SimpleView
2016-11-01 12:05:17,079 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin PostProcessingPlugin
2016-11-01 12:05:17,083 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin XRayView
2016-11-01 12:05:17,086 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin SolidView
2016-11-01 12:05:17,101 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin UltimakerMachineActions
2016-11-01 12:05:17,106 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin LegacyProfileReader
2016-11-01 12:05:17,110 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin GCodeWriter
2016-11-01 12:05:17,114 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin CuraProfileReader
2016-11-01 12:05:17,263 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin UM3NetworkPrinting
2016-11-01 12:05:17,283 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin XmlMaterialProfile
2016-11-01 12:05:17,287 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin GCodeProfileReader
2016-11-01 12:05:17,291 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin ImageReader
2016-11-01 12:05:17,328 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin SliceInfoPlugin
2016-11-01 12:05:17,335 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin VersionUpgrade21to22
2016-11-01 12:05:17,340 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin 3MFReader
2016-11-01 12:05:17,341 - WARNING - .../UM/PluginRegistry.py (loadPlugin [63]): Plugin CuraEngineBackend was already loaded
2016-11-01 12:05:17,431 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin USBPrinting
2016-11-01 12:05:17,440 - WARNING - .../UM/Preferences.py (getValue [70]): Tried to get the value of non-existing setting cura/active_mode.
2016-11-01 12:05:17,441 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin PerObjectSettingsTool
2016-11-01 12:05:17,446 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin AutoSave
2016-11-01 12:05:17,486 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin OctoPrintPlugin
2016-11-01 12:05:17,496 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin RemovableDriveOutputDevice
2016-11-01 12:05:17,505 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin LayerView
2016-11-01 12:05:17,511 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin X3DReader
2016-11-01 12:05:17,525 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin CuraProfileWriter
2016-11-01 12:05:17,531 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin ChangeLogPlugin
2016-11-01 12:05:17,542 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin MachineSettingsAction
2016-11-01 12:05:17,544 - INFO - .../UM/Qt/QtApplication.py (__init__ [39]): Command line arguments: {'disable-textures': False, 'debug-mode': False, 'external-backend': False, 'file': []}
2016-11-01 12:05:17,579 - INFO - .../UM/VersionUpgradeManager.py (upgrade [98]): Looking for old configuration files to upgrade.
2016-11-01 12:05:22,025 - DEBUG - .../UM/Backend/Backend.py (_logSocketState [165]): Socket state changed to Listening
2016-11-01 12:05:22,065 - INFO - .../UM/Backend/Backend.py (startEngine [55]): Started engine process: /usr/bin/CuraEngine
2016-11-01 12:05:22,066 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] Calling engine with: ['/usr/bin/CuraEngine', 'connect', '127.0.0.1:49674', '-j', '/usr/share/cura/resources/definitions/fdmprinter.def.json', '']
2016-11-01 12:05:22,153 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend]
2016-11-01 12:05:22,154 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] Cura_SteamEngine version DEV
2016-11-01 12:05:22,155 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] Copyright (C) 2014 David Braam
2016-11-01 12:05:22,155 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend]
2016-11-01 12:05:22,156 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] This program is free software: you can redistribute it and/or modify
2016-11-01 12:05:22,156 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] it under the terms of the GNU Affero General Public License as published by
2016-11-01 12:05:22,156 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] the Free Software Foundation, either version 3 of the License, or
2016-11-01 12:05:22,157 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] (at your option) any later version.
2016-11-01 12:05:22,157 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend]
2016-11-01 12:05:22,158 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] This program is distributed in the hope that it will be useful,
2016-11-01 12:05:22,158 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] but WITHOUT ANY WARRANTY; without even the implied warranty of
2016-11-01 12:05:22,160 - DEBUG - .../UM/Backend/Backend.py (_logSocketState [165]): Socket state changed to Connected
2016-11-01 12:05:22,160 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
2016-11-01 12:05:22,161 - DEBUG - .../UM/Backend/Backend.py (_onSocketStateChanged [155]): Backend connected on port 49674
2016-11-01 12:05:22,161 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] GNU Affero General Public License for more details.
2016-11-01 12:05:22,167 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend]
2016-11-01 12:05:22,170 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] You should have received a copy of the GNU Affero General Public License
2016-11-01 12:05:22,170 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] along with this program. If not, see <http://www.gnu.org/licenses/>.
2016-11-01 12:05:22,192 - DEBUG - .../UM/Settings/ContainerRegistry.py (_loadCachedDefinition [455]): Definition file /usr/share/cura/resources/definitions/ultimaker2.def.json is newer than cache, ignoring cached version
2016-11-01 12:05:22,351 - DEBUG - .../UM/Settings/ContainerRegistry.py (_loadCachedDefinition [455]): Definition file /usr/share/cura/resources/definitions/ultimaker3.def.json is newer than cache, ignoring cached version
2016-11-01 12:05:22,529 - DEBUG - /usr/lib/cura/plugins/MachineSettingsAction/MachineSettingsAction.py (_onContainerAdded [40]): Not attaching MachineSettingsAction to ultimaker3; Multi-extrusion printers are not supported
2016-11-01 12:05:22,530 - DEBUG - .../UM/Settings/ContainerRegistry.py (_loadCachedDefinition [455]): Definition file /usr/share/cura/resources/definitions/ultimaker3_extended.def.json is newer than cache, ignoring cached version
2016-11-01 12:05:22,720 - DEBUG - /usr/lib/cura/plugins/MachineSettingsAction/MachineSettingsAction.py (_onContainerAdded [40]): Not attaching MachineSettingsAction to ultimaker3_extended; Multi-extrusion printers are not supported
2016-11-01 12:05:22,720 - DEBUG - .../UM/Settings/ContainerRegistry.py (_loadCachedDefinition [455]): Definition file /usr/share/cura/resources/definitions/bq_witbox.def.json is newer than cache, ignoring cached version
2016-11-01 12:05:22,850 - DEBUG - .../UM/Settings/ContainerRegistry.py (_loadCachedDefinition [455]): Definition file /usr/share/cura/resources/definitions/fdmextruder.def.json is newer than cache, ignoring cached version
2016-11-01 12:05:22,854 - DEBUG - .../UM/Settings/ContainerRegistry.py (_loadCachedDefinition [455]): Definition file /usr/share/cura/resources/definitions/m180.def.json is newer than cache, ignoring cached version
2016-11-01 12:05:22,986 - DEBUG - .../UM/Settings/ContainerRegistry.py (_loadCachedDefinition [455]): Definition file /usr/share/cura/resources/definitions/innovo_inventor.def.json is newer than cache, ignoring cached version
2016-11-01 12:05:23,006 - WARNING - .../UM/Settings/DefinitionContainer.py (deserialize [188]): Unable to override setting machine_nozzle_offset_x
2016-11-01 12:05:23,008 - WARNING - .../UM/Settings/DefinitionContainer.py (deserialize [188]): Unable to override setting machine_nozzle_offset_y
2016-11-01 12:05:23,128 - DEBUG - .../UM/Settings/ContainerRegistry.py (_loadCachedDefinition [455]): Definition file /usr/share/cura/resources/definitions/rigidbot_big.def.json is newer than cache, ignoring cached version
2016-11-01 12:05:23,314 - DEBUG - .../UM/Settings/ContainerRegistry.py (_loadCachedDefinition [455]): Definition file /usr/share/cura/resources/definitions/fdmprinter.def.json is newer than cache, ignoring cached version
2016-11-01 12:05:23,428 - DEBUG - .../UM/Settings/ContainerRegistry.py (_loadCachedDefinition [455]): Definition file /usr/share/cura/resources/definitions/ultimaker_original.def.json is newer than cache, ignoring cached version
2016-11-01 12:05:23,569 - DEBUG - .../UM/Settings/ContainerRegistry.py (_loadCachedDefinition [455]): Definition file /usr/share/cura/resources/definitions/ultimaker_original_dual.def.json is newer than cache, ignoring cached version
2016-11-01 12:05:23,716 - DEBUG - /usr/lib/cura/plugins/MachineSettingsAction/MachineSettingsAction.py (_onContainerAdded [40]): Not attaching MachineSettingsAction to ultimaker_original_dual; Multi-extrusion printers are not supported
2016-11-01 12:05:23,717 - DEBUG - .../UM/Settings/ContainerRegistry.py (_loadCachedDefinition [455]): Definition file /usr/share/cura/resources/definitions/mendel90.def.json is newer than cache, ignoring cached version
2016-11-01 12:05:23,844 - DEBUG - .../UM/Settings/ContainerRegistry.py (_loadCachedDefinition [455]): Definition file /usr/share/cura/resources/definitions/custom.def.json is newer than cache, ignoring cached version
2016-11-01 12:05:23,972 - DEBUG - .../UM/Settings/ContainerRegistry.py (_loadCachedDefinition [455]): Definition file /usr/share/cura/resources/definitions/prusa_i3_xl.def.json is newer than cache, ignoring cached version
2016-11-01 12:05:24,102 - DEBUG - .../UM/Settings/ContainerRegistry.py (_loadCachedDefinition [455]): Definition file /usr/share/cura/resources/definitions/mankati_fullscale_xt_plus.def.json is newer than cache, ignoring cached version
2016-11-01 12:05:24,238 - DEBUG - .../UM/Settings/ContainerRegistry.py (_loadCachedDefinition [455]): Definition file /usr/share/cura/resources/definitions/bq_witbox_2.def.json is newer than cache, ignoring cached version
2016-11-01 12:05:24,434 - DEBUG - .../UM/Settings/ContainerRegistry.py (_loadCachedDefinition [455]): Definition file /usr/share/cura/resources/definitions/ultimaker.def.json is newer than cache, ignoring cached version
2016-11-01 12:05:24,563 - DEBUG - .../UM/Settings/ContainerRegistry.py (_loadCachedDefinition [455]): Definition file /usr/share/cura/resources/definitions/kossel_mini.def.json is newer than cache, ignoring cached version
2016-11-01 12:05:24,691 - DEBUG - .../UM/Settings/ContainerRegistry.py (_loadCachedDefinition [455]): Definition file /usr/share/cura/resources/definitions/bq_hephestos_xl.def.json is newer than cache, ignoring cached version
2016-11-01 12:05:24,822 - DEBUG - .../UM/Settings/ContainerRegistry.py (_loadCachedDefinition [455]): Definition file /usr/share/cura/resources/definitions/uniqbot_one.def.json is newer than cache, ignoring cached version
2016-11-01 12:05:24,957 - DEBUG - .../UM/Settings/ContainerRegistry.py (_loadCachedDefinition [455]): Definition file /usr/share/cura/resources/definitions/bq_hephestos_2.def.json is newer than cache, ignoring cached version
2016-11-01 12:05:25,093 - DEBUG - .../UM/Settings/ContainerRegistry.py (_loadCachedDefinition [455]): Definition file /usr/share/cura/resources/definitions/ultimaker2_extended.def.json is newer than cache, ignoring cached version
2016-11-01 12:05:25,259 - DEBUG - .../UM/Settings/ContainerRegistry.py (_loadCachedDefinition [455]): Definition file /usr/share/cura/resources/definitions/ultimaker_original_plus.def.json is newer than cache, ignoring cached version
2016-11-01 12:05:25,422 - DEBUG - .../UM/Settings/ContainerRegistry.py (_loadCachedDefinition [455]): Definition file /usr/share/cura/resources/definitions/ultimaker2_plus.def.json is newer than cache, ignoring cached version
2016-11-01 12:05:25,665 - DEBUG - /usr/lib/cura/plugins/MachineSettingsAction/MachineSettingsAction.py (_onContainerAdded [40]): Not attaching MachineSettingsAction to ultimaker2_plus; Machines that use variants are not supported
2016-11-01 12:05:25,665 - DEBUG - .../UM/Settings/ContainerRegistry.py (_loadCachedDefinition [455]): Definition file /usr/share/cura/resources/definitions/maker_starter.def.json is newer than cache, ignoring cached version
2016-11-01 12:05:25,813 - DEBUG - .../UM/Settings/ContainerRegistry.py (_loadCachedDefinition [455]): Definition file /usr/share/cura/resources/definitions/printrbot_simple.def.json is newer than cache, ignoring cached version
2016-11-01 12:05:25,943 - DEBUG - .../UM/Settings/ContainerRegistry.py (_loadCachedDefinition [455]): Definition file /usr/share/cura/resources/definitions/bq_hephestos.def.json is newer than cache, ignoring cached version
2016-11-01 12:05:26,077 - DEBUG - .../UM/Settings/ContainerRegistry.py (_loadCachedDefinition [455]): Definition file /usr/share/cura/resources/definitions/ultimaker2_extended_plus.def.json is newer than cache, ignoring cached version
2016-11-01 12:05:26,275 - DEBUG - /usr/lib/cura/plugins/MachineSettingsAction/MachineSettingsAction.py (_onContainerAdded [40]): Not attaching MachineSettingsAction to ultimaker2_extended_plus; Machines that use variants are not supported
2016-11-01 12:05:26,275 - DEBUG - .../UM/Settings/ContainerRegistry.py (_loadCachedDefinition [455]): Definition file /usr/share/cura/resources/definitions/rigidbot.def.json is newer than cache, ignoring cached version
2016-11-01 12:05:26,414 - DEBUG - .../UM/Settings/ContainerRegistry.py (_loadCachedDefinition [455]): Definition file /usr/share/cura/resources/definitions/prusa_i3.def.json is newer than cache, ignoring cached version
2016-11-01 12:05:26,548 - DEBUG - .../UM/Settings/ContainerRegistry.py (_loadCachedDefinition [455]): Definition file /usr/share/cura/resources/definitions/prusa_i3_mk2.def.json is newer than cache, ignoring cached version
2016-11-01 12:05:26,679 - DEBUG - .../UM/Settings/ContainerRegistry.py (_loadCachedDefinition [455]): Definition file /usr/share/cura/resources/definitions/grr_neo.def.json is newer than cache, ignoring cached version
2016-11-01 12:05:26,907 - DEBUG - .../UM/Settings/ContainerRegistry.py (_loadCachedDefinition [455]): Definition file /usr/share/cura/resources/definitions/ultimaker2_go.def.json is newer than cache, ignoring cached version
2016-11-01 12:05:27,072 - DEBUG - .../UM/Settings/ContainerRegistry.py (_loadCachedDefinition [455]): Definition file /usr/share/cura/resources/extruders/ultimaker3_extruder_left.def.json is newer than cache, ignoring cached version
2016-11-01 12:05:27,074 - WARNING - .../UM/Settings/DefinitionContainer.py (deserialize [188]): Unable to override setting machine_nozzle_head_distance
2016-11-01 12:05:27,077 - DEBUG - .../UM/Settings/ContainerRegistry.py (_loadCachedDefinition [455]): Definition file /usr/share/cura/resources/extruders/ultimaker_original_dual_1st.def.json is newer than cache, ignoring cached version
2016-11-01 12:05:27,081 - DEBUG - .../UM/Settings/ContainerRegistry.py (_loadCachedDefinition [455]): Definition file /usr/share/cura/resources/extruders/ultimaker3_extended_extruder_left.def.json is newer than cache, ignoring cached version
2016-11-01 12:05:27,084 - WARNING - .../UM/Settings/DefinitionContainer.py (deserialize [188]): Unable to override setting machine_nozzle_head_distance
2016-11-01 12:05:27,086 - DEBUG - .../UM/Settings/ContainerRegistry.py (_loadCachedDefinition [455]): Definition file /usr/share/cura/resources/extruders/ultimaker3_extended_extruder_right.def.json is newer than cache, ignoring cached version
2016-11-01 12:05:27,088 - WARNING - .../UM/Settings/DefinitionContainer.py (deserialize [188]): Unable to override setting machine_nozzle_head_distance
2016-11-01 12:05:27,091 - DEBUG - .../UM/Settings/ContainerRegistry.py (_loadCachedDefinition [455]): Definition file /usr/share/cura/resources/extruders/ultimaker_original_dual_2nd.def.json is newer than cache, ignoring cached version
2016-11-01 12:05:27,095 - DEBUG - .../UM/Settings/ContainerRegistry.py (_loadCachedDefinition [455]): Definition file /usr/share/cura/resources/extruders/ultimaker3_extruder_right.def.json is newer than cache, ignoring cached version
2016-11-01 12:05:27,097 - WARNING - .../UM/Settings/DefinitionContainer.py (deserialize [188]): Unable to override setting machine_nozzle_head_distance
2016-11-01 12:05:31,942 - DEBUG - .../UM/Settings/ContainerStack.py (deserialize [235]): While deserializing, we got the following container string: ultimaker3_extended_extruder_right #2_current_settings,empty_quality_changes,um3_aa0.4_PLA_Normal_Quality,generic_pla_ultimaker3_AA_0.4,ultimaker3_aa04,ultimaker3_extended_extruder_right,
2016-11-01 12:05:31,944 - DEBUG - .../UM/Settings/ContainerStack.py (deserialize [235]): While deserializing, we got the following container string: ultimaker3_extended_extruder_left #2_current_settings,empty_quality_changes,um3_aa0.4_PLA_Normal_Quality,generic_pla_ultimaker3_AA_0.4,ultimaker3_aa04,ultimaker3_extended_extruder_left,
2016-11-01 12:05:31,946 - DEBUG - .../UM/Settings/ContainerStack.py (deserialize [235]): While deserializing, we got the following container string: ultimaker3_extruder_right #2_current_settings,empty_quality_changes,um3_aa0.4_PLA_Normal_Quality,generic_pla_ultimaker3_AA_0.4,ultimaker3_aa04,ultimaker3_extruder_right,
2016-11-01 12:05:31,947 - DEBUG - .../UM/Settings/ContainerStack.py (deserialize [235]): While deserializing, we got the following container string: ultimaker3_extruder_left #2_current_settings,empty_quality_changes,um3_aa0.4_PLA_Normal_Quality,generic_pla_ultimaker3_AA_0.4,ultimaker3_aa04,ultimaker3_extruder_left,
2016-11-01 12:05:31,949 - DEBUG - .../UM/Settings/ContainerStack.py (deserialize [235]): While deserializing, we got the following container string: Ultimaker 3 Extended_current_settings,empty_quality_changes,um3_aa0.4_PLA_Normal_Quality,empty_material,empty_variant,ultimaker3_extended,
2016-11-01 12:05:31,951 - DEBUG - .../UM/Settings/ContainerStack.py (deserialize [235]): While deserializing, we got the following container string: Ultimaker 3_current_settings,empty_quality_changes,um3_aa0.4_PLA_Normal_Quality,empty_material,empty_variant,ultimaker3,
2016-11-01 12:05:31,955 - DEBUG - .../UM/Controller.py (setActiveView [80]): Setting active view to SolidView
2016-11-01 12:05:31,961 - WARNING - .../cura/Settings/ExtruderManager.py (getMachineExtruders [296]): Tried to get the extruder trains for machine Ultimaker 3, which doesn't exist.
2016-11-01 12:05:31,961 - WARNING - .../cura/Settings/ExtruderManager.py (getMachineExtruders [296]): Tried to get the extruder trains for machine Ultimaker 3, which doesn't exist.
2016-11-01 12:05:32,898 - DEBUG - .../UM/Mesh/MeshData.py (approximateConvexHull [305]): approximateConvexHull(target_count=1024) Calculating 3D convex hull took 0.048928260803222656 seconds. 121 input vertices. 121 output vertices.
2016-11-01 12:05:33,807 - DEBUG - .../UM/Qt/Bindings/Theme.py (load [118]): Loading theme file: /usr/share/cura/resources/themes/cura/theme.json
2016-11-01 12:05:33,962 - DEBUG - .../UM/Qt/Bindings/Theme.py (load [118]): Loaded theme /usr/share/cura/resources/themes/cura
QObject::connect: Parentheses expected, signal MainWindow::
QObject::connect: Parentheses expected, signal MainWindow::
QObject::connect: Parentheses expected, signal MainWindow::
qml: TableViewSelection: index out of range
qml: TableViewSelection: index out of range
2016-11-01 12:05:34,861 - WARNING - .../UM/Preferences.py (getValue [70]): Tried to get the value of non-existing setting info/automatic_update_check.
2016-11-01 12:05:34,949 - DEBUG - /usr/lib/cura/plugins/UM3NetworkPrinting/DiscoverUM3Action.py (_createAdditionalComponentsView [133]): Creating additional ui components for UM3.
2016-11-01 12:05:35,026 - DEBUG - /usr/lib/cura/plugins/OctoPrintPlugin/DiscoverOctoPrintAction.py (_createAdditionalComponentsView [143]): Creating additional ui components for OctoPrint-connected printers.
2016-11-01 12:05:36,229 - DEBUG - .../UM/Qt/GL/QtOpenGL.py (__init__ [19]): Initialized OpenGL subsystems.
2016-11-01 12:05:36,229 - DEBUG - .../UM/Qt/GL/QtOpenGL.py (__init__ [19]): OpenGL Version: 3.0 Mesa 12.0.3
2016-11-01 12:05:36,229 - DEBUG - .../UM/Qt/GL/QtOpenGL.py (__init__ [19]): OpenGL Vendor: VMware, Inc.
2016-11-01 12:05:36,230 - DEBUG - .../UM/Qt/GL/QtOpenGL.py (__init__ [19]): OpenGL Renderer: Gallium 0.4 on llvmpipe (LLVM 3.8, 128 bits)
2016-11-01 12:05:46,441 - DEBUG - .../UM/Qt/QtApplication.py (windowClosed [197]): Shutting down cura
2016-11-01 12:05:47,885 - DEBUG - /usr/lib/cura/plugins/CuraEngineBackend/CuraEngineBackend.py (_terminate [186]): Attempting to kill the engine process
2016-11-01 12:05:47,885 - DEBUG - /usr/lib/cura/plugins/CuraEngineBackend/CuraEngineBackend.py (_terminate [186]): Killing engine process
2016-11-01 12:05:47,886 - DEBUG - /usr/lib/cura/plugins/CuraEngineBackend/CuraEngineBackend.py (_terminate [186]): Engine process is killed. Received return code -15
thopiekar@hp:~$ cura
2016-11-01 12:06:04,675 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin ConsoleLogger
2016-11-01 12:06:04,686 - INFO - /usr/lib/cura/plugins/CuraEngineBackend/CuraEngineBackend.py (__init__ [40]): Found CuraEngine at: /usr/bin/CuraEngine
2016-11-01 12:06:04,687 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin CuraEngineBackend
2016-11-01 12:06:04,695 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin LocalFileOutputDevice
2016-11-01 12:06:04,695 - WARNING - .../UM/PluginRegistry.py (loadPlugin [63]): Plugin ConsoleLogger was already loaded
2016-11-01 12:06:04,698 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin FileLogger
2016-11-01 12:06:04,704 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin TranslateTool
2016-11-01 12:06:04,713 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin ScaleTool
2016-11-01 12:06:04,717 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin CameraTool
2016-11-01 12:06:04,723 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin MirrorTool
2016-11-01 12:06:04,735 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin RotateTool
2016-11-01 12:06:04,741 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin SelectionTool
2016-11-01 12:06:04,744 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin OBJWriter
2016-11-01 12:06:04,754 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin 3MFWriter
2016-11-01 12:06:04,756 - WARNING - /usr/lib/uranium/plugins/FileHandlers/STLReader/STLReader.py (<module> [5]): Could not find numpy-stl, falling back to slower code.
2016-11-01 12:06:04,758 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin STLReader
2016-11-01 12:06:04,761 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin STLWriter
2016-11-01 12:06:04,765 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin OBJReader
2016-11-01 12:06:04,767 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin WireframeView
2016-11-01 12:06:04,769 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin SimpleView
2016-11-01 12:06:04,775 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin PostProcessingPlugin
2016-11-01 12:06:04,777 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin XRayView
2016-11-01 12:06:04,779 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin SolidView
2016-11-01 12:06:04,783 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin UltimakerMachineActions
2016-11-01 12:06:04,785 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin LegacyProfileReader
2016-11-01 12:06:04,788 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin GCodeWriter
2016-11-01 12:06:04,791 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin CuraProfileReader
2016-11-01 12:06:04,892 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin UM3NetworkPrinting
2016-11-01 12:06:04,907 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin XmlMaterialProfile
2016-11-01 12:06:04,911 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin GCodeProfileReader
2016-11-01 12:06:04,915 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin ImageReader
2016-11-01 12:06:04,952 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin SliceInfoPlugin
2016-11-01 12:06:04,956 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin VersionUpgrade21to22
2016-11-01 12:06:04,958 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin 3MFReader
2016-11-01 12:06:04,959 - WARNING - .../UM/PluginRegistry.py (loadPlugin [63]): Plugin CuraEngineBackend was already loaded
2016-11-01 12:06:04,969 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin USBPrinting
2016-11-01 12:06:04,975 - WARNING - .../UM/Preferences.py (getValue [70]): Tried to get the value of non-existing setting cura/active_mode.
2016-11-01 12:06:04,975 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin PerObjectSettingsTool
2016-11-01 12:06:04,978 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin AutoSave
2016-11-01 12:06:05,000 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin OctoPrintPlugin
2016-11-01 12:06:05,008 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin RemovableDriveOutputDevice
2016-11-01 12:06:05,014 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin LayerView
2016-11-01 12:06:05,017 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin X3DReader
2016-11-01 12:06:05,020 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin CuraProfileWriter
2016-11-01 12:06:05,023 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin ChangeLogPlugin
2016-11-01 12:06:05,027 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin MachineSettingsAction
2016-11-01 12:06:05,029 - INFO - .../UM/Qt/QtApplication.py (__init__ [39]): Command line arguments: {'external-backend': False, 'disable-textures': False, 'debug-mode': False, 'file': []}
2016-11-01 12:06:05,033 - INFO - .../UM/VersionUpgradeManager.py (upgrade [98]): Looking for old configuration files to upgrade.
2016-11-01 12:06:07,715 - DEBUG - .../UM/Backend/Backend.py (_logSocketState [165]): Socket state changed to Listening
2016-11-01 12:06:07,725 - INFO - .../UM/Backend/Backend.py (startEngine [55]): Started engine process: /usr/bin/CuraEngine
2016-11-01 12:06:07,725 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] Calling engine with: ['/usr/bin/CuraEngine', 'connect', '127.0.0.1:49674', '-j', '/usr/share/cura/resources/definitions/fdmprinter.def.json', '']
2016-11-01 12:06:07,731 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend]
2016-11-01 12:06:07,732 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] Cura_SteamEngine version DEV
2016-11-01 12:06:07,733 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] Copyright (C) 2014 David Braam
2016-11-01 12:06:07,735 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend]
2016-11-01 12:06:07,741 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] This program is free software: you can redistribute it and/or modify
2016-11-01 12:06:07,742 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] it under the terms of the GNU Affero General Public License as published by
2016-11-01 12:06:07,742 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] the Free Software Foundation, either version 3 of the License, or
2016-11-01 12:06:07,743 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] (at your option) any later version.
2016-11-01 12:06:07,743 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend]
2016-11-01 12:06:07,743 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] This program is distributed in the hope that it will be useful,
2016-11-01 12:06:07,744 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] but WITHOUT ANY WARRANTY; without even the implied warranty of
2016-11-01 12:06:07,744 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
2016-11-01 12:06:07,745 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] GNU Affero General Public License for more details.
2016-11-01 12:06:07,745 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend]
2016-11-01 12:06:07,746 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] You should have received a copy of the GNU Affero General Public License
2016-11-01 12:06:07,746 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] along with this program. If not, see <http://www.gnu.org/licenses/>.
2016-11-01 12:06:07,911 - DEBUG - /usr/lib/cura/plugins/MachineSettingsAction/MachineSettingsAction.py (_onContainerAdded [40]): Not attaching MachineSettingsAction to ultimaker3; Multi-extrusion printers are not supported
2016-11-01 12:06:08,552 - DEBUG - /usr/lib/cura/plugins/MachineSettingsAction/MachineSettingsAction.py (_onContainerAdded [40]): Not attaching MachineSettingsAction to ultimaker_original_dual; Multi-extrusion printers are not supported
2016-11-01 12:06:08,635 - DEBUG - /usr/lib/cura/plugins/MachineSettingsAction/MachineSettingsAction.py (_onContainerAdded [40]): Not attaching MachineSettingsAction to ultimaker3_extended; Multi-extrusion printers are not supported
2016-11-01 12:06:09,057 - DEBUG - /usr/lib/cura/plugins/MachineSettingsAction/MachineSettingsAction.py (_onContainerAdded [40]): Not attaching MachineSettingsAction to ultimaker2_plus; Machines that use variants are not supported
2016-11-01 12:06:09,528 - DEBUG - /usr/lib/cura/plugins/MachineSettingsAction/MachineSettingsAction.py (_onContainerAdded [40]): Not attaching MachineSettingsAction to ultimaker2_extended_plus; Machines that use variants are not supported
2016-11-01 12:06:14,543 - DEBUG - .../UM/Settings/ContainerStack.py (deserialize [235]): While deserializing, we got the following container string: ultimaker3_extruder_left #2_current_settings,empty_quality_changes,um3_aa0.4_PLA_Normal_Quality,generic_pla_ultimaker3_AA_0.4,ultimaker3_aa04,ultimaker3_extruder_left,
2016-11-01 12:06:14,545 - DEBUG - .../UM/Settings/ContainerStack.py (deserialize [235]): While deserializing, we got the following container string: ultimaker3_extended_extruder_left #2_current_settings,empty_quality_changes,um3_aa0.4_PLA_Normal_Quality,generic_pla_ultimaker3_AA_0.4,ultimaker3_aa04,ultimaker3_extended_extruder_left,
2016-11-01 12:06:14,547 - DEBUG - .../UM/Settings/ContainerStack.py (deserialize [235]): While deserializing, we got the following container string: ultimaker3_extended_extruder_right #2_current_settings,empty_quality_changes,um3_aa0.4_PLA_Normal_Quality,generic_pla_ultimaker3_AA_0.4,ultimaker3_aa04,ultimaker3_extended_extruder_right,
2016-11-01 12:06:14,549 - DEBUG - .../UM/Settings/ContainerStack.py (deserialize [235]): While deserializing, we got the following container string: ultimaker3_extruder_right #2_current_settings,empty_quality_changes,um3_aa0.4_PLA_Normal_Quality,generic_pla_ultimaker3_AA_0.4,ultimaker3_aa04,ultimaker3_extruder_right,
2016-11-01 12:06:14,550 - DEBUG - .../UM/Settings/ContainerStack.py (deserialize [235]): While deserializing, we got the following container string: Ultimaker 3 Extended_current_settings,empty_quality_changes,um3_aa0.4_PLA_Normal_Quality,empty_material,empty_variant,ultimaker3_extended,
2016-11-01 12:06:14,552 - DEBUG - .../UM/Settings/ContainerStack.py (deserialize [235]): While deserializing, we got the following container string: Ultimaker 3_current_settings,empty_quality_changes,um3_aa0.4_PLA_Normal_Quality,empty_material,empty_variant,ultimaker3,
2016-11-01 12:06:14,556 - DEBUG - .../UM/Backend/Backend.py (_logSocketState [165]): Socket state changed to Connected
2016-11-01 12:06:14,556 - DEBUG - .../UM/Backend/Backend.py (_onSocketStateChanged [155]): Backend connected on port 49674
2016-11-01 12:06:14,557 - DEBUG - .../UM/Controller.py (setActiveView [80]): Setting active view to SolidView
2016-11-01 12:06:14,563 - WARNING - .../cura/Settings/ExtruderManager.py (getMachineExtruders [296]): Tried to get the extruder trains for machine Ultimaker 3, which doesn't exist.
2016-11-01 12:06:14,563 - WARNING - .../cura/Settings/ExtruderManager.py (getMachineExtruders [296]): Tried to get the extruder trains for machine Ultimaker 3, which doesn't exist.
2016-11-01 12:06:15,605 - DEBUG - .../UM/Mesh/MeshData.py (approximateConvexHull [305]): approximateConvexHull(target_count=1024) Calculating 3D convex hull took 0.024756908416748047 seconds. 121 input vertices. 121 output vertices.
2016-11-01 12:06:16,162 - DEBUG - .../UM/Qt/Bindings/Theme.py (load [118]): Loading theme file: /usr/share/cura/resources/themes/cura/theme.json
2016-11-01 12:06:16,267 - DEBUG - .../UM/Qt/Bindings/Theme.py (load [118]): Loaded theme /usr/share/cura/resources/themes/cura
QObject::connect: Parentheses expected, signal MainWindow::
QObject::connect: Parentheses expected, signal MainWindow::
QObject::connect: Parentheses expected, signal MainWindow::
qml: TableViewSelection: index out of range
qml: TableViewSelection: index out of range
2016-11-01 12:06:17,214 - WARNING - .../UM/Preferences.py (getValue [70]): Tried to get the value of non-existing setting info/automatic_update_check.
2016-11-01 12:06:17,262 - DEBUG - /usr/lib/cura/plugins/UM3NetworkPrinting/DiscoverUM3Action.py (_createAdditionalComponentsView [133]): Creating additional ui components for UM3.
2016-11-01 12:06:17,312 - DEBUG - /usr/lib/cura/plugins/OctoPrintPlugin/DiscoverOctoPrintAction.py (_createAdditionalComponentsView [143]): Creating additional ui components for OctoPrint-connected printers.
2016-11-01 12:06:17,540 - DEBUG - .../UM/Qt/GL/QtOpenGL.py (__init__ [19]): Initialized OpenGL subsystems.
2016-11-01 12:06:17,541 - DEBUG - .../UM/Qt/GL/QtOpenGL.py (__init__ [19]): OpenGL Version: 2.1 Mesa 12.0.3
2016-11-01 12:06:17,541 - DEBUG - .../UM/Qt/GL/QtOpenGL.py (__init__ [19]): OpenGL Vendor: Intel Open Source Technology Center
2016-11-01 12:06:17,541 - DEBUG - .../UM/Qt/GL/QtOpenGL.py (__init__ [19]): OpenGL Renderer: Mesa DRI Intel(R) Ironlake Mobile
2016-11-01 12:06:24,595 - DEBUG - .../UM/Qt/QtApplication.py (windowClosed [197]): Shutting down cura
2016-11-01 12:06:25,525 - DEBUG - /usr/lib/cura/plugins/CuraEngineBackend/CuraEngineBackend.py (_terminate [186]): Attempting to kill the engine process
2016-11-01 12:06:25,526 - DEBUG - /usr/lib/cura/plugins/CuraEngineBackend/CuraEngineBackend.py (_terminate [186]): Killing engine process
2016-11-01 12:06:25,527 - DEBUG - /usr/lib/cura/plugins/CuraEngineBackend/CuraEngineBackend.py (_terminate [186]): Engine process is killed. Received return code -15
Very strange.. So now it is only related to the NVidia drivers again? :confused:
thopiekar
on 1 Nov 2016
@argo2445 I also resetted my configs and I can't reproduce it here.
Could you run dmesg and show us mount, too? Just want to be sure there is everything ok with your system.
thopiekar
on 1 Nov 2016
Additionally, are there any modifications on your Xorg's settings?
thopiekar
on 1 Nov 2016
I did not modify anything about Xorg. I just upgraded the System from Ubuntu 16.04 to 16.10 two weeks ago.
$ dmesg
[...]
[...]
argo2445
on 1 Nov 2016
Ok, your systems seems to be fine. Your dmesg says that your problem here actually takes place in libQt5XcbQpa.so.5.6.1, which is a Qt5 library..
thopiekar
on 1 Nov 2016
@argo2445 Please run: gdb -ex r --args python3 /usr/bin/cura, wait until it crashes and type in "bt".
Finally please paste the complete output here.
thopiekar
on 1 Nov 2016
$ gdb -ex r --args python3 /usr/bin/cura
GNU gdb (Ubuntu 7.11.90.20161005-0ubuntu1) 7.11.90.20161005-git
Copyright (C) 2016 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law. Type "show copying"
and "show warranty" for details.
This GDB was configured as "x86_64-linux-gnu".
Type "show configuration" for configuration details.
For bug reporting instructions, please see:
<http://www.gnu.org/software/gdb/bugs/>.
Find the GDB manual and other documentation resources online at:
<http://www.gnu.org/software/gdb/documentation/>.
For help, type "help".
Type "apropos word" to search for commands related to "word"...
Reading symbols from python3...(no debugging symbols found)...done.
Starting program: /usr/bin/python3 /usr/bin/cura
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".
[New Thread 0x7fffe1c0e700 (LWP 9750)]
[New Thread 0x7fffe0ff9700 (LWP 9751)]
[New Thread 0x7fffcf2d8700 (LWP 9753)]
[New Thread 0x7fffcead7700 (LWP 9754)]
[New Thread 0x7fffce2d6700 (LWP 9755)]
[New Thread 0x7fffcd1f6700 (LWP 9756)]
[New Thread 0x7fffcc9f5700 (LWP 9757)]
2016-11-01 12:42:37,147 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin ConsoleLogger
2016-11-01 12:42:37,157 - INFO - /usr/lib/cura/plugins/CuraEngineBackend/CuraEngineBackend.py (__init__ [40]): Found CuraEngine at: /usr/bin/CuraEngine
2016-11-01 12:42:37,158 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin CuraEngineBackend
2016-11-01 12:42:37,162 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin WireframeView
2016-11-01 12:42:37,164 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin SimpleView
2016-11-01 12:42:37,175 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin RotateTool
2016-11-01 12:42:37,180 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin SelectionTool
2016-11-01 12:42:37,189 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin ScaleTool
2016-11-01 12:42:37,194 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin TranslateTool
2016-11-01 12:42:37,198 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin CameraTool
2016-11-01 12:42:37,204 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin MirrorTool
2016-11-01 12:42:37,210 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin LocalFileOutputDevice
2016-11-01 12:42:37,210 - WARNING - .../UM/PluginRegistry.py (loadPlugin [63]): Plugin ConsoleLogger was already loaded
2016-11-01 12:42:37,212 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin FileLogger
2016-11-01 12:42:37,216 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin STLWriter
2016-11-01 12:42:37,219 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin OBJReader
2016-11-01 12:42:37,222 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin OBJWriter
2016-11-01 12:42:37,224 - WARNING - /usr/lib/uranium/plugins/FileHandlers/STLReader/STLReader.py (<module> [5]): Could not find numpy-stl, falling back to slower code.
2016-11-01 12:42:37,226 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin STLReader
2016-11-01 12:42:37,233 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin 3MFWriter
2016-11-01 12:42:37,236 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin CuraProfileWriter
2016-11-01 12:42:37,282 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Plugin Doodle3D uses an incompatible API version, ignoring
2016-11-01 12:42:37,285 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin LayerView
2016-11-01 12:42:37,288 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin LegacyProfileReader
2016-11-01 12:42:37,291 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin ImageReader
2016-11-01 12:42:37,294 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin GCodeProfileReader
2016-11-01 12:42:37,298 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin MachineSettingsAction
2016-11-01 12:42:37,301 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin X3DReader
2016-11-01 12:42:37,303 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin AutoSave
2016-11-01 12:42:37,305 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin SolidView
2016-11-01 12:42:37,308 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin VersionUpgrade21to22
2016-11-01 12:42:37,310 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin XRayView
[New Thread 0x7fffb5a98700 (LWP 9760)]
2016-11-01 12:42:37,323 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin USBPrinting
2016-11-01 12:42:37,331 - WARNING - .../UM/Preferences.py (getValue [70]): Tried to get the value of non-existing setting cura/active_mode.
2016-11-01 12:42:37,331 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin PerObjectSettingsTool
2016-11-01 12:42:37,340 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin XmlMaterialProfile
2016-11-01 12:42:37,344 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin ChangeLogPlugin
2016-11-01 12:42:37,344 - WARNING - .../UM/PluginRegistry.py (loadPlugin [63]): Plugin CuraEngineBackend was already loaded
2016-11-01 12:42:37,347 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin 3MFReader
[New Thread 0x7fffb5257700 (LWP 9762)]
2016-11-01 12:42:37,350 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin RemovableDriveOutputDevice
2016-11-01 12:42:37,353 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin CuraProfileReader
2016-11-01 12:42:37,362 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin UltimakerMachineActions
2016-11-01 12:42:37,369 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin SliceInfoPlugin
2016-11-01 12:42:37,371 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin GCodeWriter
2016-11-01 12:42:37,372 - INFO - .../UM/Qt/QtApplication.py (__init__ [39]): Command line arguments: {'file': [], 'external-backend': False, 'disable-textures': False, 'debug-mode': False}
[New Thread 0x7fffb4a16700 (LWP 9763)]
[New Thread 0x7fffa7fff700 (LWP 9764)]
2016-11-01 12:42:37,377 - DEBUG - /usr/lib/cura/plugins/USBPrinting/USBPrinterOutputDevice.py (_connect [298]): Attempting to connect to /dev/ttyACM2
[New Thread 0x7fffa77fe700 (LWP 9765)]
2016-11-01 12:42:37,382 - DEBUG - /usr/lib/cura/plugins/USBPrinting/USBPrinterOutputDevice.py (_connect [298]): Attempting to connect to /dev/ttyACM1
[New Thread 0x7fffa6ffd700 (LWP 9766)]
2016-11-01 12:42:37,383 - DEBUG - /usr/lib/cura/plugins/USBPrinting/USBPrinterOutputDevice.py (_connect [298]): Attempting to connect to /dev/ttyACM0
2016-11-01 12:42:37,394 - INFO - .../UM/VersionUpgradeManager.py (upgrade [98]): Looking for old configuration files to upgrade.
[Thread 0x7fffcc9f5700 (LWP 9757) exited]
2016-11-01 12:42:40,173 - DEBUG - .../UM/Backend/Backend.py (_logSocketState [165]): Socket state changed to Listening
2016-11-01 12:42:40,179 - INFO - .../UM/Backend/Backend.py (startEngine [55]): Started engine process: /usr/bin/CuraEngine
2016-11-01 12:42:40,179 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] Calling engine with: ['/usr/bin/CuraEngine', 'connect', '127.0.0.1:49674', '-j', '/usr/share/cura/resources/definitions/fdmprinter.def.json', '']
[New Thread 0x7fffcc9f5700 (LWP 9769)]
[New Thread 0x7fffa67fc700 (LWP 9770)]
2016-11-01 12:42:40,182 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend]
2016-11-01 12:42:40,183 - WARNING - .../UM/OutputDevice/OutputDeviceManager.py (removeOutputDevice [123]): Could not find output device with id /dev/ttyACM2 to remove
2016-11-01 12:42:40,183 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] Cura_SteamEngine version DEV
2016-11-01 12:42:40,183 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] Copyright (C) 2014 David Braam
2016-11-01 12:42:40,183 - WARNING - .../UM/OutputDevice/OutputDeviceManager.py (removeOutputDevice [123]): Could not find output device with id /dev/ttyACM1 to remove
2016-11-01 12:42:40,184 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend]
2016-11-01 12:42:40,184 - WARNING - .../UM/OutputDevice/OutputDeviceManager.py (removeOutputDevice [123]): Could not find output device with id /dev/ttyACM0 to remove
2016-11-01 12:42:40,184 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] This program is free software: you can redistribute it and/or modify
2016-11-01 12:42:40,184 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] it under the terms of the GNU Affero General Public License as published by
2016-11-01 12:42:40,189 - DEBUG - .../UM/Backend/Backend.py (_logSocketState [165]): Socket state changed to Connected
2016-11-01 12:42:40,190 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] the Free Software Foundation, either version 3 of the License, or
2016-11-01 12:42:40,190 - DEBUG - .../UM/Backend/Backend.py (_onSocketStateChanged [155]): Backend connected on port 49674
2016-11-01 12:42:40,190 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] (at your option) any later version.
2016-11-01 12:42:40,191 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend]
2016-11-01 12:42:40,191 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] This program is distributed in the hope that it will be useful,
2016-11-01 12:42:40,195 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] but WITHOUT ANY WARRANTY; without even the implied warranty of
2016-11-01 12:42:40,195 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
2016-11-01 12:42:40,195 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] GNU Affero General Public License for more details.
2016-11-01 12:42:40,196 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend]
2016-11-01 12:42:40,196 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] You should have received a copy of the GNU Affero General Public License
2016-11-01 12:42:40,196 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] along with this program. If not, see <http://www.gnu.org/licenses/>.
2016-11-01 12:42:40,284 - INFO - /usr/lib/cura/plugins/USBPrinting/USBPrinterOutputDevice.py (_connect [298]): Could not establish connection on /dev/ttyACM0: 'Timeout'. Device is not arduino based.
2016-11-01 12:42:40,290 - DEBUG - /usr/lib/cura/plugins/USBPrinting/USBPrinterOutputDevice.py (_connect [298]): Attempting to connect to printer with serial /dev/ttyACM0 on baud rate 115200
2016-11-01 12:42:40,304 - WARNING - .../cura/MachineActionManager.py (addSupportedAction [68]): Unable to add DiscoverUM3Action to ultimaker3_extended, as the action is not recognised
2016-11-01 12:42:40,305 - WARNING - .../cura/MachineActionManager.py (addFirstStartAction [79]): Unable to add DiscoverUM3Action to ultimaker3_extended, as the action is not recognised
2016-11-01 12:42:40,305 - DEBUG - /usr/lib/cura/plugins/MachineSettingsAction/MachineSettingsAction.py (_onContainerAdded [40]): Not attaching MachineSettingsAction to ultimaker3_extended; Multi-extrusion printers are not supported
2016-11-01 12:42:40,372 - DEBUG - /usr/lib/cura/plugins/MachineSettingsAction/MachineSettingsAction.py (_onContainerAdded [40]): Not attaching MachineSettingsAction to ultimaker_original_dual; Multi-extrusion printers are not supported
2016-11-01 12:42:40,472 - INFO - /usr/lib/cura/plugins/USBPrinting/USBPrinterOutputDevice.py (_connect [298]): Could not establish connection on /dev/ttyACM2: 'Timeout'. Device is not arduino based.
2016-11-01 12:42:40,474 - DEBUG - /usr/lib/cura/plugins/USBPrinting/USBPrinterOutputDevice.py (_connect [298]): Attempting to connect to printer with serial /dev/ttyACM2 on baud rate 115200
2016-11-01 12:42:40,518 - WARNING - .../cura/MachineActionManager.py (addSupportedAction [68]): Unable to add DiscoverUM3Action to ultimaker3, as the action is not recognised
2016-11-01 12:42:40,518 - WARNING - .../cura/MachineActionManager.py (addFirstStartAction [79]): Unable to add DiscoverUM3Action to ultimaker3, as the action is not recognised
2016-11-01 12:42:40,518 - DEBUG - /usr/lib/cura/plugins/MachineSettingsAction/MachineSettingsAction.py (_onContainerAdded [40]): Not attaching MachineSettingsAction to ultimaker3; Multi-extrusion printers are not supported
2016-11-01 12:42:40,531 - INFO - /usr/lib/cura/plugins/USBPrinting/USBPrinterOutputDevice.py (_connect [298]): Could not establish connection on /dev/ttyACM1: 'Timeout'. Device is not arduino based.
2016-11-01 12:42:40,531 - DEBUG - /usr/lib/cura/plugins/USBPrinting/USBPrinterOutputDevice.py (_connect [298]): Attempting to connect to printer with serial /dev/ttyACM1 on baud rate 115200
2016-11-01 12:42:41,175 - DEBUG - /usr/lib/cura/plugins/MachineSettingsAction/MachineSettingsAction.py (_onContainerAdded [40]): Not attaching MachineSettingsAction to ultimaker2_plus; Machines that use variants are not supported
2016-11-01 12:42:41,245 - DEBUG - /usr/lib/cura/plugins/MachineSettingsAction/MachineSettingsAction.py (_onContainerAdded [40]): Not attaching MachineSettingsAction to ultimaker2_extended_plus; Machines that use variants are not supported
2016-11-01 12:42:46,836 - DEBUG - /usr/lib/cura/plugins/USBPrinting/USBPrinterOutputDevice.py (_connect [298]): Attempting to connect to printer with serial /dev/ttyACM0 on baud rate 250000
[New Thread 0x7fff9737f700 (LWP 9773)]
[New Thread 0x7fff96b7e700 (LWP 9774)]
[New Thread 0x7fff9637d700 (LWP 9775)]
[New Thread 0x7fff95b7c700 (LWP 9776)]
2016-11-01 12:42:46,857 - DEBUG - .../UM/Controller.py (setActiveView [80]): Setting active view to SolidView
[New Thread 0x7fff9533b700 (LWP 9777)]
2016-11-01 12:42:46,979 - DEBUG - /usr/lib/cura/plugins/USBPrinting/USBPrinterOutputDevice.py (_connect [298]): Attempting to connect to printer with serial /dev/ttyACM2 on baud rate 250000
2016-11-01 12:42:47,035 - DEBUG - /usr/lib/cura/plugins/USBPrinting/USBPrinterOutputDevice.py (_connect [298]): Attempting to connect to printer with serial /dev/ttyACM1 on baud rate 250000
2016-11-01 12:42:47,399 - DEBUG - .../UM/Qt/Bindings/Theme.py (load [118]): Loading theme file: /usr/share/cura/resources/themes/cura/theme.json
2016-11-01 12:42:47,489 - DEBUG - .../UM/Qt/Bindings/Theme.py (load [118]): Loaded theme /usr/share/cura/resources/themes/cura
QObject::connect: Parentheses expected, signal MainWindow::
QObject::connect: Parentheses expected, signal MainWindow::
QObject::connect: Parentheses expected, signal MainWindow::
2016-11-01 12:42:47,584 - WARNING - .../cura/Settings/ContainerManager.py (getContainerMetaDataEntry [171]): Could not get metadata of container because it was not found.
Thread 1 "python3" received signal SIGSEGV, Segmentation fault.
0x00007fffe4e75c7f in ?? () from /usr/lib/x86_64-linux-gnu/libQt5XcbQpa.so.5
(gdb) bt
#0 0x00007fffe4e75c7f in ?? () from /usr/lib/x86_64-linux-gnu/libQt5XcbQpa.so.5
#1 0x00007fffe4e6ec2d in ?? () from /usr/lib/x86_64-linux-gnu/libQt5XcbQpa.so.5
#2 0x00007fff941fe9eb in ?? () from /usr/lib/x86_64-linux-gnu/qt5/qml/QtQuick/Controls/libqtquickcontrolsplugin.so
#3 0x00007fff941feb3b in ?? () from /usr/lib/x86_64-linux-gnu/qt5/qml/QtQuick/Controls/libqtquickcontrolsplugin.so
#4 0x00007fff9421cfe0 in ?? () from /usr/lib/x86_64-linux-gnu/qt5/qml/QtQuick/Controls/libqtquickcontrolsplugin.so
#5 0x00007fff9421d28b in ?? () from /usr/lib/x86_64-linux-gnu/qt5/qml/QtQuick/Controls/libqtquickcontrolsplugin.so
#6 0x00007fffe8927af0 in QQmlVMEMetaObject::metaCall(QObject*, QMetaObject::Call, int, void**) () from /usr/lib/x86_64-linux-gnu/libQt5Qml.so.5
#7 0x00007fffe893cba2 in QQmlPropertyPrivate::write(QObject*, QQmlPropertyData const&, QVariant const&, QQmlContextData*, QFlags<QQmlPropertyPrivate::WriteFlag>) () from /usr/lib/x86_64-linux-gnu/libQt5Qml.so.5
#8 0x00007fffe893e083 in QQmlPropertyPrivate::writeValueProperty(QObject*, QQmlPropertyData const&, QVariant const&, QQmlContextData*, QFlags<QQmlPropertyPrivate::WriteFlag>) () from /usr/lib/x86_64-linux-gnu/libQt5Qml.so.5
#9 0x00007fffe89aac0e in QQmlBinding::write(QQmlPropertyData const&, QV4::Value const&, bool, QFlags<QQmlPropertyPrivate::WriteFlag>) () from /usr/lib/x86_64-linux-gnu/libQt5Qml.so.5
#10 0x00007fffe89abb67 in QQmlBinding::update(QFlags<QQmlPropertyPrivate::WriteFlag>) () from /usr/lib/x86_64-linux-gnu/libQt5Qml.so.5
#11 0x00007fffe89ac03e in QQmlBinding::refresh() () from /usr/lib/x86_64-linux-gnu/libQt5Qml.so.5
#12 0x00007fffe8981bd4 in QQmlNotifier::emitNotify(QQmlNotifierEndpoint*, void**) () from /usr/lib/x86_64-linux-gnu/libQt5Qml.so.5
#13 0x00007fffe892c4a4 in QQmlData::signalEmitted(QAbstractDeclarativeData*, QObject*, int, void**) () from /usr/lib/x86_64-linux-gnu/libQt5Qml.so.5
#14 0x00007fffef7a02b0 in QMetaObject::activate(QObject*, int, int, void**) () from /usr/lib/x86_64-linux-gnu/libQt5Core.so.5
#15 0x00007fffe8927f37 in QQmlVMEMetaObject::metaCall(QObject*, QMetaObject::Call, int, void**) () from /usr/lib/x86_64-linux-gnu/libQt5Qml.so.5
#16 0x00007fffe893cba2 in QQmlPropertyPrivate::write(QObject*, QQmlPropertyData const&, QVariant const&, QQmlContextData*, QFlags<QQmlPropertyPrivate::WriteFlag>) () from /usr/lib/x86_64-linux-gnu/libQt5Qml.so.5
#17 0x00007fffe893e083 in QQmlPropertyPrivate::writeValueProperty(QObject*, QQmlPropertyData const&, QVariant const&, QQmlContextData*, QFlags<QQmlPropertyPrivate::WriteFlag>) () from /usr/lib/x86_64-linux-gnu/libQt5Qml.so.5
#18 0x00007fffe89aac0e in QQmlBinding::write(QQmlPropertyData const&, QV4::Value const&, bool, QFlags<QQmlPropertyPrivate::WriteFlag>) () from /usr/lib/x86_64-linux-gnu/libQt5Qml.so.5
#19 0x00007fffe89abb67 in QQmlBinding::update(QFlags<QQmlPropertyPrivate::WriteFlag>) () from /usr/lib/x86_64-linux-gnu/libQt5Qml.so.5
#20 0x00007fffe89ac03e in QQmlBinding::refresh() () from /usr/lib/x86_64-linux-gnu/libQt5Qml.so.5
#21 0x00007fffe8981bd4 in QQmlNotifier::emitNotify(QQmlNotifierEndpoint*, void**) () from /usr/lib/x86_64-linux-gnu/libQt5Qml.so.5
#22 0x00007fffe892c4a4 in QQmlData::signalEmitted(QAbstractDeclarativeData*, QObject*, int, void**) () from /usr/lib/x86_64-linux-gnu/libQt5Qml.so.5
#23 0x00007fffef7a02b0 in QMetaObject::activate(QObject*, int, int, void**) () from /usr/lib/x86_64-linux-gnu/libQt5Core.so.5
#24 0x00007fffe52a15f5 in ?? () from /usr/lib/x86_64-linux-gnu/libQt5Quick.so.5
#25 0x00007fffe894444d in ?? () from /usr/lib/x86_64-linux-gnu/libQt5Qml.so.5
#26 0x00007fffe89446de in QQmlEnginePrivate::incubate(QQmlIncubator&, QQmlContextData*) () from /usr/lib/x86_64-linux-gnu/libQt5Qml.so.5
#27 0x00007fffe893f988 in QQmlComponent::create(QQmlIncubator&, QQmlContext*, QQmlContext*) () from /usr/lib/x86_64-linux-gnu/libQt5Qml.so.5
#28 0x00007fffe52a05af in ?? () from /usr/lib/x86_64-linux-gnu/libQt5Quick.so.5
#29 0x00007fffe52a0758 in ?? () from /usr/lib/x86_64-linux-gnu/libQt5Quick.so.5
#30 0x00007fffe89b5ad9 in ?? () from /usr/lib/x86_64-linux-gnu/libQt5Qml.so.5
#31 0x00007fffe893f4ae in QQmlComponentPrivate::complete(QQmlEnginePrivate*, QQmlComponentPrivate::ConstructionState*) () from /usr/lib/x86_64-linux-gnu/libQt5Qml.so.5
#32 0x00007fffe893f577 in QQmlComponentPrivate::completeCreate() () from /usr/lib/x86_64-linux-gnu/libQt5Qml.so.5
#33 0x00007fffe893f3e0 in QQmlComponent::create(QQmlContext*) () from /usr/lib/x86_64-linux-gnu/libQt5Qml.so.5
#34 0x00007fffe89acd3a in QQmlApplicationEnginePrivate::_q_finishLoad(QObject*) () from /usr/lib/x86_64-linux-gnu/libQt5Qml.so.5
#35 0x00007fffe89acfc2 in QQmlApplicationEnginePrivate::startLoad(QUrl const&, QByteArray const&, bool) () from /usr/lib/x86_64-linux-gnu/libQt5Qml.so.5
#36 0x00007fffe89ad1a0 in QQmlApplicationEngine::load(QString const&) () from /usr/lib/x86_64-linux-gnu/libQt5Qml.so.5
#37 0x00007fffe8b2f6ae in ?? () from /usr/lib/python3/dist-packages/PyQt5/QtQml.cpython-35m-x86_64-linux-gnu.so
#38 0x00005555556720ff in PyCFunction_Call ()
#39 0x00005555556c58ba in PyEval_EvalFrameEx ()
#40 0x00005555556c5b0f in PyEval_EvalFrameEx ()
#41 0x00005555556c5b0f in PyEval_EvalFrameEx ()
#42 0x00005555556ca3f6 in ?? ()
#43 0x00005555556cb0af in PyEval_EvalCode ()
#44 0x00005555557a4532 in ?? ()
#45 0x00005555557a6a5d in PyRun_FileExFlags ()
#46 0x00005555557a71fe in PyRun_SimpleFileExFlags ()
#47 0x00005555557d7647 in Py_Main ()
#48 0x00005555556677e1 in main ()
(gdb)
Thanks! I see that some debug packages are missing here. Will tell you which are needed here in short.
thopiekar
on 1 Nov 2016
Please install qtbase5-dbg and python3-pyqt5-dbg. It also should be wise to install python3-dbg, I think.
thopiekar
on 1 Nov 2016
Also, qtdeclarative5-dbg
awhiemstra
on 1 Nov 2016
@argo2445 Oh, and please rerun GDB as described before.
thopiekar
on 1 Nov 2016
$ gdb -ex r --args python3 /usr/bin/cura
GNU gdb (Ubuntu 7.11.90.20161005-0ubuntu1) 7.11.90.20161005-git
Copyright (C) 2016 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law. Type "show copying"
and "show warranty" for details.
This GDB was configured as "x86_64-linux-gnu".
Type "show configuration" for configuration details.
For bug reporting instructions, please see:
<http://www.gnu.org/software/gdb/bugs/>.
Find the GDB manual and other documentation resources online at:
<http://www.gnu.org/software/gdb/documentation/>.
For help, type "help".
Type "apropos word" to search for commands related to "word"...
Reading symbols from python3...Reading symbols from /usr/lib/debug/.build-id/b0/38c0c0f8d605ffb7d8fc0f48509284140ff3ae.debug...done.
done.
Starting program: /usr/bin/python3 /usr/bin/cura
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".
[New Thread 0x7fffe1c0e700 (LWP 11800)]
[New Thread 0x7fffe0ff9700 (LWP 11801)]
[New Thread 0x7fffcf2d8700 (LWP 11803)]
[New Thread 0x7fffcead7700 (LWP 11804)]
[New Thread 0x7fffce2d6700 (LWP 11805)]
[New Thread 0x7fffcd1f6700 (LWP 11806)]
[New Thread 0x7fffcc9f5700 (LWP 11807)]
2016-11-01 13:06:05,579 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin ConsoleLogger
2016-11-01 13:06:05,587 - INFO - /usr/lib/cura/plugins/CuraEngineBackend/CuraEngineBackend.py (__init__ [40]): Found CuraEngine at: /usr/bin/CuraEngine
2016-11-01 13:06:05,588 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin CuraEngineBackend
2016-11-01 13:06:05,592 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin WireframeView
2016-11-01 13:06:05,594 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin SimpleView
2016-11-01 13:06:05,604 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin RotateTool
2016-11-01 13:06:05,607 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin SelectionTool
2016-11-01 13:06:05,615 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin ScaleTool
2016-11-01 13:06:05,621 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin TranslateTool
2016-11-01 13:06:05,626 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin CameraTool
2016-11-01 13:06:05,631 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin MirrorTool
2016-11-01 13:06:05,636 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin LocalFileOutputDevice
2016-11-01 13:06:05,636 - WARNING - .../UM/PluginRegistry.py (loadPlugin [63]): Plugin ConsoleLogger was already loaded
2016-11-01 13:06:05,639 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin FileLogger
2016-11-01 13:06:05,644 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin STLWriter
2016-11-01 13:06:05,647 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin OBJReader
2016-11-01 13:06:05,650 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin OBJWriter
2016-11-01 13:06:05,652 - WARNING - /usr/lib/uranium/plugins/FileHandlers/STLReader/STLReader.py (<module> [5]): Could not find numpy-stl, falling back to slower code.
2016-11-01 13:06:05,653 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin STLReader
2016-11-01 13:06:05,662 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin 3MFWriter
2016-11-01 13:06:05,664 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin CuraProfileWriter
2016-11-01 13:06:05,712 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Plugin Doodle3D uses an incompatible API version, ignoring
2016-11-01 13:06:05,717 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin LayerView
2016-11-01 13:06:05,719 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin LegacyProfileReader
2016-11-01 13:06:05,722 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin ImageReader
2016-11-01 13:06:05,724 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin GCodeProfileReader
2016-11-01 13:06:05,727 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin MachineSettingsAction
2016-11-01 13:06:05,730 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin X3DReader
2016-11-01 13:06:05,731 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin AutoSave
2016-11-01 13:06:05,733 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin SolidView
2016-11-01 13:06:05,737 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin VersionUpgrade21to22
2016-11-01 13:06:05,741 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin XRayView
[New Thread 0x7fffb5a98700 (LWP 11810)]
2016-11-01 13:06:05,757 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin USBPrinting
2016-11-01 13:06:05,761 - WARNING - .../UM/Preferences.py (getValue [70]): Tried to get the value of non-existing setting cura/active_mode.
2016-11-01 13:06:05,762 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin PerObjectSettingsTool
2016-11-01 13:06:05,773 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin XmlMaterialProfile
2016-11-01 13:06:05,777 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin ChangeLogPlugin
2016-11-01 13:06:05,777 - WARNING - .../UM/PluginRegistry.py (loadPlugin [63]): Plugin CuraEngineBackend was already loaded
2016-11-01 13:06:05,780 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin 3MFReader
[New Thread 0x7fffb5257700 (LWP 11812)]
2016-11-01 13:06:05,783 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin RemovableDriveOutputDevice
2016-11-01 13:06:05,787 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin CuraProfileReader
2016-11-01 13:06:05,792 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin UltimakerMachineActions
2016-11-01 13:06:05,798 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin SliceInfoPlugin
2016-11-01 13:06:05,801 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin GCodeWriter
2016-11-01 13:06:05,802 - INFO - .../UM/Qt/QtApplication.py (__init__ [39]): Command line arguments: {'file': [], 'debug-mode': False, 'disable-textures': False, 'external-backend': False}
[New Thread 0x7fffb4a16700 (LWP 11813)]
[New Thread 0x7fffa7fff700 (LWP 11814)]
2016-11-01 13:06:05,809 - DEBUG - /usr/lib/cura/plugins/USBPrinting/USBPrinterOutputDevice.py (_connect [298]): Attempting to connect to /dev/ttyACM2
[New Thread 0x7fffa77fe700 (LWP 11815)]
2016-11-01 13:06:05,812 - DEBUG - /usr/lib/cura/plugins/USBPrinting/USBPrinterOutputDevice.py (_connect [298]): Attempting to connect to /dev/ttyACM1
[New Thread 0x7fffa6ffd700 (LWP 11816)]
2016-11-01 13:06:05,820 - DEBUG - /usr/lib/cura/plugins/USBPrinting/USBPrinterOutputDevice.py (_connect [298]): Attempting to connect to /dev/ttyACM0
2016-11-01 13:06:05,821 - INFO - .../UM/VersionUpgradeManager.py (upgrade [98]): Looking for old configuration files to upgrade.
[Thread 0x7fffcd1f6700 (LWP 11806) exited]
2016-11-01 13:06:08,711 - DEBUG - .../UM/Backend/Backend.py (_logSocketState [165]): Socket state changed to Listening
2016-11-01 13:06:08,718 - INFO - .../UM/Backend/Backend.py (startEngine [55]): Started engine process: /usr/bin/CuraEngine
2016-11-01 13:06:08,718 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] Calling engine with: ['/usr/bin/CuraEngine', 'connect', '127.0.0.1:49674', '-j', '/usr/share/cura/resources/definitions/fdmprinter.def.json', '']
[New Thread 0x7fffcd1f6700 (LWP 11819)]
[New Thread 0x7fffa67fc700 (LWP 11820)]
2016-11-01 13:06:08,720 - WARNING - .../UM/OutputDevice/OutputDeviceManager.py (removeOutputDevice [123]): Could not find output device with id /dev/ttyACM2 to remove
2016-11-01 13:06:08,720 - WARNING - .../UM/OutputDevice/OutputDeviceManager.py (removeOutputDevice [123]): Could not find output device with id /dev/ttyACM1 to remove
2016-11-01 13:06:08,721 - WARNING - .../UM/OutputDevice/OutputDeviceManager.py (removeOutputDevice [123]): Could not find output device with id /dev/ttyACM0 to remove
2016-11-01 13:06:08,723 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend]
2016-11-01 13:06:08,731 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] Cura_SteamEngine version DEV
2016-11-01 13:06:08,732 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] Copyright (C) 2014 David Braam
2016-11-01 13:06:08,732 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend]
2016-11-01 13:06:08,732 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] This program is free software: you can redistribute it and/or modify
2016-11-01 13:06:08,732 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] it under the terms of the GNU Affero General Public License as published by
2016-11-01 13:06:08,732 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] the Free Software Foundation, either version 3 of the License, or
2016-11-01 13:06:08,732 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] (at your option) any later version.
2016-11-01 13:06:08,733 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend]
2016-11-01 13:06:08,733 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] This program is distributed in the hope that it will be useful,
2016-11-01 13:06:08,733 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] but WITHOUT ANY WARRANTY; without even the implied warranty of
2016-11-01 13:06:08,733 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
2016-11-01 13:06:08,733 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] GNU Affero General Public License for more details.
2016-11-01 13:06:08,734 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend]
2016-11-01 13:06:08,734 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] You should have received a copy of the GNU Affero General Public License
2016-11-01 13:06:08,734 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] along with this program. If not, see <http://www.gnu.org/licenses/>.
2016-11-01 13:06:08,760 - INFO - /usr/lib/cura/plugins/USBPrinting/USBPrinterOutputDevice.py (_connect [298]): Could not establish connection on /dev/ttyACM1: 'Timeout'. Device is not arduino based.
2016-11-01 13:06:08,760 - INFO - /usr/lib/cura/plugins/USBPrinting/USBPrinterOutputDevice.py (_connect [298]): Could not establish connection on /dev/ttyACM2: 'Timeout'. Device is not arduino based.
2016-11-01 13:06:08,763 - DEBUG - /usr/lib/cura/plugins/USBPrinting/USBPrinterOutputDevice.py (_connect [298]): Attempting to connect to printer with serial /dev/ttyACM1 on baud rate 115200
2016-11-01 13:06:08,764 - DEBUG - /usr/lib/cura/plugins/USBPrinting/USBPrinterOutputDevice.py (_connect [298]): Attempting to connect to printer with serial /dev/ttyACM2 on baud rate 115200
2016-11-01 13:06:08,922 - DEBUG - /usr/lib/cura/plugins/MachineSettingsAction/MachineSettingsAction.py (_onContainerAdded [40]): Not attaching MachineSettingsAction to ultimaker2_plus; Machines that use variants are not supported
2016-11-01 13:06:08,948 - INFO - /usr/lib/cura/plugins/USBPrinting/USBPrinterOutputDevice.py (_connect [298]): Could not establish connection on /dev/ttyACM0: 'Timeout'. Device is not arduino based.
2016-11-01 13:06:08,956 - DEBUG - /usr/lib/cura/plugins/USBPrinting/USBPrinterOutputDevice.py (_connect [298]): Attempting to connect to printer with serial /dev/ttyACM0 on baud rate 115200
2016-11-01 13:06:08,960 - WARNING - .../cura/MachineActionManager.py (addSupportedAction [68]): Unable to add DiscoverUM3Action to ultimaker3, as the action is not recognised
2016-11-01 13:06:08,960 - WARNING - .../cura/MachineActionManager.py (addFirstStartAction [79]): Unable to add DiscoverUM3Action to ultimaker3, as the action is not recognised
2016-11-01 13:06:08,960 - DEBUG - /usr/lib/cura/plugins/MachineSettingsAction/MachineSettingsAction.py (_onContainerAdded [40]): Not attaching MachineSettingsAction to ultimaker3; Multi-extrusion printers are not supported
2016-11-01 13:06:09,238 - WARNING - .../cura/MachineActionManager.py (addSupportedAction [68]): Unable to add DiscoverUM3Action to ultimaker3_extended, as the action is not recognised
2016-11-01 13:06:09,239 - WARNING - .../cura/MachineActionManager.py (addFirstStartAction [79]): Unable to add DiscoverUM3Action to ultimaker3_extended, as the action is not recognised
2016-11-01 13:06:09,239 - DEBUG - /usr/lib/cura/plugins/MachineSettingsAction/MachineSettingsAction.py (_onContainerAdded [40]): Not attaching MachineSettingsAction to ultimaker3_extended; Multi-extrusion printers are not supported
2016-11-01 13:06:09,325 - DEBUG - /usr/lib/cura/plugins/MachineSettingsAction/MachineSettingsAction.py (_onContainerAdded [40]): Not attaching MachineSettingsAction to ultimaker_original_dual; Multi-extrusion printers are not supported
2016-11-01 13:06:09,865 - DEBUG - /usr/lib/cura/plugins/MachineSettingsAction/MachineSettingsAction.py (_onContainerAdded [40]): Not attaching MachineSettingsAction to ultimaker2_extended_plus; Machines that use variants are not supported
2016-11-01 13:06:15,307 - DEBUG - /usr/lib/cura/plugins/USBPrinting/USBPrinterOutputDevice.py (_connect [298]): Attempting to connect to printer with serial /dev/ttyACM2 on baud rate 250000
2016-11-01 13:06:15,313 - DEBUG - /usr/lib/cura/plugins/USBPrinting/USBPrinterOutputDevice.py (_connect [298]): Attempting to connect to printer with serial /dev/ttyACM1 on baud rate 250000
2016-11-01 13:06:15,475 - DEBUG - /usr/lib/cura/plugins/USBPrinting/USBPrinterOutputDevice.py (_connect [298]): Attempting to connect to printer with serial /dev/ttyACM0 on baud rate 250000
[New Thread 0x7fff9737f700 (LWP 11823)]
[New Thread 0x7fff96b7e700 (LWP 11824)]
[New Thread 0x7fff9637d700 (LWP 11825)]
[New Thread 0x7fff95b7c700 (LWP 11826)]
2016-11-01 13:06:15,793 - DEBUG - .../UM/Backend/Backend.py (_logSocketState [165]): Socket state changed to Connected
2016-11-01 13:06:15,793 - DEBUG - .../UM/Backend/Backend.py (_onSocketStateChanged [155]): Backend connected on port 49674
2016-11-01 13:06:15,794 - DEBUG - .../UM/Controller.py (setActiveView [80]): Setting active view to SolidView
[New Thread 0x7fff9533b700 (LWP 11827)]
2016-11-01 13:06:16,367 - DEBUG - .../UM/Qt/Bindings/Theme.py (load [118]): Loading theme file: /usr/share/cura/resources/themes/cura/theme.json
2016-11-01 13:06:16,468 - DEBUG - .../UM/Qt/Bindings/Theme.py (load [118]): Loaded theme /usr/share/cura/resources/themes/cura
QObject::connect: Parentheses expected, signal MainWindow::
QObject::connect: Parentheses expected, signal MainWindow::
QObject::connect: Parentheses expected, signal MainWindow::
2016-11-01 13:06:16,573 - WARNING - .../cura/Settings/ContainerManager.py (getContainerMetaDataEntry [171]): Could not get metadata of container because it was not found.
Thread 1 "python3" received signal SIGSEGV, Segmentation fault.
QDBusPlatformMenu::insertMenuItem (this=0x555559a3d430, menuItem=0x0, before=<optimized out>) at dbusmenu/qdbusplatformmenu.cpp:187
187 dbusmenu/qdbusplatformmenu.cpp: Datei oder Verzeichnis nicht gefunden.
(gdb) bt
#0 QDBusPlatformMenu::insertMenuItem (this=0x555559a3d430, menuItem=0x0, before=<optimized out>) at dbusmenu/qdbusplatformmenu.cpp:187
#1 0x00007fffe4e6ec2d in QDBusMenuBar::insertMenu (this=0x555559a3d530, menu=<optimized out>, before=0x0) at dbusmenu/qdbusmenubar.cpp:102
#2 0x00007fff941fe9eb in ?? () from /usr/lib/x86_64-linux-gnu/qt5/qml/QtQuick/Controls/libqtquickcontrolsplugin.so
#3 0x00007fff941feb3b in ?? () from /usr/lib/x86_64-linux-gnu/qt5/qml/QtQuick/Controls/libqtquickcontrolsplugin.so
#4 0x00007fff9421cfe0 in ?? () from /usr/lib/x86_64-linux-gnu/qt5/qml/QtQuick/Controls/libqtquickcontrolsplugin.so
#5 0x00007fff9421d28b in ?? () from /usr/lib/x86_64-linux-gnu/qt5/qml/QtQuick/Controls/libqtquickcontrolsplugin.so
#6 0x00007fffe8927af0 in QQmlVMEMetaObject::metaCall (this=0x555559604890, o=<optimized out>, c=QMetaObject::WriteProperty, _id=4, a=0x7fffffff9460) at qml/qqmlvmemetaobject.cpp:876
#7 0x00007fffe893cba2 in QQmlPropertyPrivate::write (object=object@entry=0x5555596046a0, property=..., value=..., context=context@entry=0x55555ab63c40, flags=...) at qml/qqmlproperty.cpp:1252
#8 0x00007fffe893e083 in QQmlPropertyPrivate::writeValueProperty (object=0x5555596046a0, core=..., value=..., context=0x55555ab63c40, flags=...) at qml/qqmlproperty.cpp:1176
#9 0x00007fffe89aac0e in QQmlBinding::write (this=this@entry=0x5555596063a0, core=..., result=..., isUndefined=<optimized out>, flags=...) at qml/qqmlbinding.cpp:327
#10 0x00007fffe89abb67 in QQmlBinding::update (this=0x5555596063a0, flags=...) at qml/qqmlbinding.cpp:191
#11 0x00007fffe89ac03e in QQmlBinding::refresh (this=<optimized out>) at qml/qqmlbinding.cpp:403
#12 0x00007fffe8981bd4 in QQmlNotifier::emitNotify (endpoint=<optimized out>, a=a@entry=0x0) at qml/qqmlnotifier.cpp:94
#13 0x00007fffe892c4a4 in QQmlData::signalEmitted (object=0x5555596046a0, index=7, a=0x0) at qml/qqmlengine.cpp:773
#14 0x00007fffef7a02b0 in QMetaObject::activate (sender=0x5555596046a0, signalOffset=<optimized out>, local_signal_index=<optimized out>, argv=argv@entry=0x0) at kernel/qobject.cpp:3616
#15 0x00007fffe89269d5 in QQmlVMEMetaObject::activate (this=this@entry=0x555559604890, object=<optimized out>, index=<optimized out>, args=args@entry=0x0) at qml/qqmlvmemetaobject.cpp:1196
#16 0x00007fffe8927f37 in QQmlVMEMetaObject::metaCall (this=0x555559604890, o=<optimized out>, c=<optimized out>, _id=<optimized out>, a=<optimized out>) at qml/qqmlvmemetaobject.cpp:748
#17 0x00007fffe893cba2 in QQmlPropertyPrivate::write (object=object@entry=0x5555596046a0, property=..., value=..., context=context@entry=0x55555ab63c40, flags=...) at qml/qqmlproperty.cpp:1252
#18 0x00007fffe893e083 in QQmlPropertyPrivate::writeValueProperty (object=0x5555596046a0, core=..., value=..., context=0x55555ab63c40, flags=...) at qml/qqmlproperty.cpp:1176
#19 0x00007fffe89aac0e in QQmlBinding::write (this=this@entry=0x555559606410, core=..., result=..., isUndefined=<optimized out>, flags=...) at qml/qqmlbinding.cpp:327
#20 0x00007fffe89abb67 in QQmlBinding::update (this=0x555559606410, flags=...) at qml/qqmlbinding.cpp:191
#21 0x00007fffe89ac03e in QQmlBinding::refresh (this=<optimized out>) at qml/qqmlbinding.cpp:403
#22 0x00007fffe8981bd4 in QQmlNotifier::emitNotify (endpoint=<optimized out>, a=a@entry=0x0) at qml/qqmlnotifier.cpp:94
#23 0x00007fffe892c4a4 in QQmlData::signalEmitted (object=0x5555596046e0, index=31, a=0x0) at qml/qqmlengine.cpp:773
#24 0x00007fffef7a02b0 in QMetaObject::activate (sender=sender@entry=0x5555596046e0, signalOffset=<optimized out>, local_signal_index=local_signal_index@entry=0, argv=argv@entry=0x0) at kernel/qobject.cpp:3616
#25 0x00007fffef7a10f7 in QMetaObject::activate (sender=sender@entry=0x5555596046e0, m=m@entry=0x7fffe53ee400 <QQuickLoader::staticMetaObject>, local_signal_index=local_signal_index@entry=0, argv=argv@entry=0x0)
at kernel/qobject.cpp:3595
#26 0x00007fffe52615f5 in QQuickLoader::itemChanged (this=<optimized out>) at .moc/moc_qquickloader_p.cpp:329
#27 QQuickLoaderPrivate::incubatorStateChanged (this=0x555559605a30, status=QQmlIncubator::Ready) at items/qquickloader.cpp:667
#28 0x00007fffe894444d in QQmlIncubatorPrivate::changeStatus (s=<optimized out>, this=0x555559a3ae60) at qml/qqmlincubator.cpp:701
#29 QQmlIncubatorPrivate::incubate (this=this@entry=0x555559a3ae60, i=...) at qml/qqmlincubator.cpp:368
#30 0x00007fffe89446de in QQmlEnginePrivate::incubate (this=this@entry=0x5555595c39c0, i=..., forContext=forContext@entry=0x555559a3ad80) at qml/qqmlincubator.cpp:87
#31 0x00007fffe893f988 in QQmlComponent::create (this=<optimized out>, incubator=..., context=<optimized out>, forContext=forContext@entry=0x0) at qml/qqmlcomponent.cpp:1059
#32 0x00007fffe52605af in QQuickLoaderPrivate::_q_sourceLoaded (this=this@entry=0x555559605a30) at items/qquickloader.cpp:715
#33 0x00007fffe5260758 in QQuickLoaderPrivate::load (this=0x555559605a30) at items/qquickloader.cpp:597
#34 0x00007fffe89b5ad9 in QQmlObjectCreator::finalize (this=0x5555595d9000, interrupt=...) at qml/qqmlobjectcreator.cpp:1206
#35 0x00007fffe893f4ae in QQmlComponentPrivate::complete (enginePriv=0x5555595c39c0, state=0x555559671110) at qml/qqmlcomponent.cpp:919
#36 0x00007fffe893f577 in QQmlComponentPrivate::completeCreate (this=0x555559671070) at qml/qqmlcomponent.cpp:955
#37 0x00007fffe893f3e0 in QQmlComponent::create (this=0x5555585e2ab0, context=0x55555939e740) at qml/qqmlcomponent.cpp:781
#38 0x00007fffe89acd3a in QQmlApplicationEnginePrivate::_q_finishLoad (this=this@entry=0x5555595c39c0, o=o@entry=0x5555585e2ab0) at qml/qqmlapplicationengine.cpp:130
#39 0x00007fffe89acfc2 in QQmlApplicationEnginePrivate::startLoad (this=this@entry=0x5555595c39c0, url=..., data=..., dataFlag=dataFlag@entry=false) at qml/qqmlapplicationengine.cpp:109
#40 0x00007fffe89ad1a0 in QQmlApplicationEngine::load (this=<optimized out>, filePath=...) at qml/qqmlapplicationengine.cpp:264
#41 0x00007fffe8b2f6ae in ?? () from /usr/lib/python3/dist-packages/PyQt5/QtQml.cpython-35m-x86_64-linux-gnu.so
#42 0x00005555556720ff in PyCFunction_Call () at ../Objects/methodobject.c:109
#43 0x00005555556c58ba in call_function (oparg=<optimized out>, pp_stack=0x7fffffffd7c0) at ../Python/ceval.c:4707
#44 PyEval_EvalFrameEx () at ../Python/ceval.c:3238
#45 0x00005555556c5b0f in fast_function (nk=<optimized out>, na=<optimized out>, n=<optimized out>, pp_stack=0x7fffffffd8f0, func=<optimized out>) at ../Python/ceval.c:4805
#46 call_function (oparg=<optimized out>, pp_stack=0x7fffffffd8f0) at ../Python/ceval.c:4732
#47 PyEval_EvalFrameEx () at ../Python/ceval.c:3238
#48 0x00005555556c5b0f in fast_function (nk=<optimized out>, na=<optimized out>, n=<optimized out>, pp_stack=0x7fffffffda20, func=<optimized out>) at ../Python/ceval.c:4805
#49 call_function (oparg=<optimized out>, pp_stack=0x7fffffffda20) at ../Python/ceval.c:4732
#50 PyEval_EvalFrameEx () at ../Python/ceval.c:3238
#51 0x00005555556ca3f6 in _PyEval_EvalCodeWithName () at ../Python/ceval.c:4020
#52 0x00005555556cb0af in PyEval_EvalCodeEx () at ../Python/ceval.c:4041
#53 PyEval_EvalCode (co=<optimized out>, globals=<optimized out>, locals=<optimized out>) at ../Python/ceval.c:777
#54 0x00005555557a4532 in run_mod () at ../Python/pythonrun.c:976
#55 0x00005555557a6a5d in PyRun_FileExFlags () at ../Python/pythonrun.c:929
#56 0x00005555557a71fe in PyRun_SimpleFileExFlags () at ../Python/pythonrun.c:396
#57 0x00005555557d7647 in run_file (p_cf=0x7fffffffdc90, filename=0x555555c0b280 L"/usr/bin/cura", fp=0x555555d03a60) at ../Modules/main.c:318
#58 Py_Main () at ../Modules/main.c:768
#59 0x00005555556677e1 in main () at ../Programs/python.c:65
#60 0x00007ffff78133f1 in __libc_start_main (main=0x555555667700 <main>, argc=2, argv=0x7fffffffdea8, init=<optimized out>, fini=<optimized out>, rtld_fini=<optimized out>, stack_end=0x7fffffffde98) at ../csu/libc-start.c:291
#61 0x000055555576f1ba in _start ()
(gdb)
@argo2445 Thanks! Just added the missing ``` at the beginning and end for you :wink:
thopiekar
on 1 Nov 2016
0 QDBusPlatformMenu::insertMenuItem (this=0x555559a3d430, menuItem=0x0, before=) at dbusmenu/qdbusplatformmenu.cpp:187
1 0x00007fffe4e6ec2d in QDBusMenuBar::insertMenu (this=0x555559a3d530, menu=, before=0x0) at dbusmenu/qdbusmenubar.cpp:102
Well there's your issue... sounds like this is an upstream bug.
awhiemstra
on 1 Nov 2016
Thank you very much @thopiekar and @awhiemstra! What to do now?
Can I fix this on my own? Do I need to wait for a fix?
argo2445
on 1 Nov 2016
Sadly, yes. I don't see any proposed updates on the Qt5 package in Ubuntu's repository.
Can't say when it will land in their repo at all :disappointed:
thopiekar
on 1 Nov 2016
Okay, I will wait for a fix :(.
Thank you very much for your help!
argo2445
on 1 Nov 2016
In the meantime, it might be possible to find a workaround. If you don't mind breaking global menu bar on some applications, uninstalling libdbusmenu-qt5 might work for example.
awhiemstra
on 1 Nov 2016
@argo2445 Be careful, it might uninstall your desktop. My KDE desktop depends on it for example:
thopiekar@home:~$ sudo apt remove libdbusmenu-qt5
Paketlisten werden gelesen... Fertig
Abh盲ngigkeitsbaum wird aufgebaut.
Statusinformationen werden eingelesen.... Fertig
Die folgenden Pakete wurden automatisch installiert und werden nicht mehr ben枚tigt:
akonadi-backend-mysql akonadi-server dvgrab ieee-data kaccounts-providers kactivities-bin kactivitymanagerd kamera kate5-data kde-cli-tools-data kde-style-oxygen-qt5 kde-telepathy-data kde-telepathy-kaccounts kdeconnect kded5
kdeedu-data kdegraphics-thumbnailers kdenlive-data kdepim-doc kdepimlibs-data kdepimlibs-kio-plugins kdeplasma-addons-data kdoctools5 kf5-kdepim-apps-libs-data kf5-messagelib-data khotkeys-data kinit konversation-data kross
ksysguard-data ksysguardd ktexteditor-data ktexteditor-katepart kwin-data libcln6 libdolphinvcs5 libfakekey0 libgps22 libgrantlee-templates5 libgrantlee-textdocument5 libkaccounts1 libkf5activities5 libkf5activitiesstats1
libkf5akonadiagentbase5 libkf5akonadicontact5 libkf5akonadicore-bin libkf5akonadicore5 libkf5akonadimime5 libkf5akonadinotes5 libkf5akonadiprivate5 libkf5akonadisearchdebug5 libkf5akonadisearchpim5 libkf5akonadiwidgets5
libkf5baloowidgets-bin libkf5baloowidgets5 libkf5bluezqt-data libkf5bluezqt6 libkf5calendarevents5 libkf5calendarsupport-data libkf5contacts-data libkf5contacts5 libkf5dnssd-data libkf5dnssd5 libkf5emoticons-bin libkf5emoticons-data
libkf5emoticons5 libkf5eventviews-data libkf5followupreminder5 libkf5gapi-data libkf5gapicontacts5 libkf5gapicore5 libkf5gpgmepp-pthread5 libkf5gpgmepp5 libkf5grantleetheme-plugins libkf5holidays-data libkf5holidays5
libkf5identitymanagement5abi1 libkf5imap5 libkf5itemmodels5 libkf5js5 libkf5jsembed-data libkf5jsembed5 libkf5kdcraw5 libkf5kdelibs4support-data libkf5kdepimdbusinterfaces5 libkf5kdgantt2-5 libkf5kexiv2-15.0.0 libkf5khtml-data
libkf5kiogui5 libkf5kiontlm5 libkf5kipi-bin libkf5kipi31.0.0 libkf5kmanagesieve5 libkf5kontactinterface-data libkf5kontactinterface5 libkf5krosscore5 libkf5krossui5 libkf5ksieve-data libkf5ksieve5 libkf5ldap5 libkf5libkdepim-data
libkf5libkleo5 libkf5mailtransport-data libkf5mbox5 libkf5messagecore5 libkf5mime5 libkf5modemmanagerqt6 libkf5networkmanagerqt6 libkf5newstuff-data libkf5notifications-data libkf5notifyconfig-data libkf5notifyconfig5
libkf5people-data libkf5people5 libkf5peoplebackend5 libkf5peoplewidgets5 libkf5pimtextedit5abi1 libkf5plotting5 libkf5qgpgme5 libkf5screen-bin libkf5screen7 libkf5sendlater5 libkf5su-bin libkf5su-data libkf5su5 libkf5syndication5
libkf5sysguard-bin libkf5sysguard-data libkf5texteditor5 libkf5texteditor5-libjs-underscore libkf5threadweaver5 libkf5unitconversion-data libkf5unitconversion5 libkf5wallet-data libkf5waylandserver5 libkf5xmlrpcclient-data
libkf5xmlrpcclient5 libkfontinst5 libkfontinstui5 libkolabxml1v5 libksgrd7 libksignalplotter7 libkubuntu1 libkwineffects8 libkwinglutils8 libkwinxrenderutils8 libkworkspace5-5 liblegacytaskmanager5 liboxygenstyle5-5
liboxygenstyleconfig5-5 libplasma-geolocation-interface5 libpowerdevilui5 libprocesscore7 libprocessui7 libqalculate5-data libqalculate5v5 libqca-qt5-2 libqca-qt5-2-plugins libqt5multimedia5-plugins libscim8v5 libtaskmanager6
libtelepathy-logger-qt5 libtelepathy-qt4-2 libtelepathy-qt5-0 plasma-desktop-data powerdevil-data qml-module-org-kde-activities qml-module-org-kde-bluezqt qml-module-org-kde-draganddrop qml-module-org-kde-extensionplugin
qml-module-org-kde-kcoreaddons qml-module-org-kde-kio qml-module-org-kde-kquickcontrols qml-module-org-kde-kquickcontrolsaddons qml-module-org-kde-kwindowsystem qml-module-org-kde-solid qml-module-qtmultimedia qml-module-qtwebkit
quassel-data recordmydesktop signon-plugin-password sni-qt swh-plugins telepathy-accounts-signon
Verwenden Sie 禄sudo apt autoremove芦, um sie zu entfernen.
Die folgenden Pakete werden ENTFERNT:
accountwizard akregator bluedevil dolphin frameworkintegration gwenview kaccounts-integration kaddressbook kate kcalc kde-cli-tools kde-config-gtk-style kde-config-mailtransport kde-config-screenlocker kde-config-telepathy-accounts
kde-spectacle kde-style-qtcurve-qt5 kde-telepathy kde-telepathy-approver kde-telepathy-auth-handler kde-telepathy-contact-list kde-telepathy-desktop-applets kde-telepathy-filetransfer-handler kde-telepathy-integration-module
kde-telepathy-kpeople kde-telepathy-minimal kde-telepathy-send-file kde-telepathy-text-ui kdeconnect-plasma kdenlive kdepim-addons kdepim-runtime kdepim-themeeditors kgamma5 khelpcenter khotkeys kinfocenter kio kio-extras kmail
kmenuedit kmplot knotes konsole konsole-kpart kontact konversation korganizer krdc kscreen ksshaskpass ksysguard ktnef kubuntu-desktop kubuntu-full kubuntu-notification-helper kwalletmanager kwin kwin-addons kwin-common kwin-x11
kwrited libdbusmenu-qt5 libkf5akonadicalendar5 libkf5alarmcalendar5 libkf5calendarcore5 libkf5calendarsupport5 libkf5calendarutils5 libkf5eventviews5 libkf5gapicalendar5 libkf5gapitasks5 libkf5grantleetheme5 libkf5gravatar5
libkf5incidenceeditor-bin libkf5incidenceeditor5 libkf5kaddressbookgrantlee5 libkf5kdelibs4support5 libkf5kdelibs4support5-bin libkf5khtml-bin libkf5khtml5 libkf5ksieveui5 libkf5libkdepim-plugins libkf5libkdepim5
libkf5mailcommon-plugins libkf5mailcommon5 libkf5mailimporter5 libkf5mailtransport5 libkf5messagecomposer5 libkf5messagelist5 libkf5messageviewer5 libkf5newstuff5 libkf5notifications5 libkf5pimcommon-plugins libkf5pimcommon5
libkf5plasma5 libkf5plasmaquick5 libkf5runner5 libkf5sane5 libkf5templateparser5 libkf5tnef5 libkf5wallet-bin libkf5wallet5 libkf5webkit5 libkolab1 libkscreenlocker5 libktpcommoninternals9 libktplogger9 libktpmodels9 libktpotr9
libktpwidgets9 libkwalletbackend5-5 libkwin4-effect-builtins1 libpowerdevilcore2 libweather-ion7 milou plasma-dataengines-addons plasma-desktop plasma-framework plasma-integration plasma-nm plasma-runners-addons
plasma-wallpapers-addons plasma-widgets-addons plasma-workspace powerdevil print-manager qml-module-org-kde-runnermodel qml-module-org-kde-telepathy quassel sddm sddm-theme-breeze signon-kwallet-extension skanlite systemsettings
user-manager
0 aktualisiert, 0 neu installiert, 135 zu entfernen und 0 nicht aktualisiert.
Nach dieser Operation werden 234 MB Plattenplatz freigegeben.
M枚chten Sie fortfahren? [J/n]
This same issue was also reported in https://github.com/Ultimaker/Cura/issues/1028 . So it also occurs in OSX. In OSX, updating Qt is not an option since it loads the library from the app package.
Ghostkeeper
on 1 Nov 2016
Maybe there will be a chance to get this fixed by Canonical ;)
thopiekar
on 1 Nov 2016
This same issue was also reported in #1028 . So it also occurs in OSX. In OSX, updating Qt is not an option since it loads the library from the app package.
That is impossible. The Qt XCB plugin does not even get built on OSX. The reported crash on OSX is unrelated to this one.
awhiemstra
on 2 Nov 2016
@argo2445 One thing you can try that is not so risky as removing dbusmenu is using the AppImage we built: http://software.ultimaker.com/current/Cura-2.3.0.AppImage . Download it and make it executable, then you can start it like a normal program. The AppImage contains a different Qt that (hopefully) does not run into the same problem.
awhiemstra
on 2 Nov 2016
Also, I just looked at the source package for Qt in 16.10 (http://packages.ubuntu.com/source/yakkety/qtbase-opensource-src). There are a bunch of dbusmenu patches there that are the likely culprit. This suggests to me the AppImage is going to work.
awhiemstra
on 2 Nov 2016
@awhiemstra The AppImage works! Thank you very much!
argo2445
on 2 Nov 2016
I have installed Cura from ppa
if i lunch in a terminal "sudo cura" the program start but not work if i try "cura" not start and i have this:
An exception occured while trying to read preferences file: 'general'
2016-11-02 23:55:18,335 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin ConsoleLogger
2016-11-02 23:55:18,343 - INFO - /usr/lib/cura/plugins/CuraEngineBackend/CuraEngineBackend.py (init [40]): Found CuraEngine at: /usr/bin/CuraEngine
2016-11-02 23:55:18,344 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin CuraEngineBackend
2016-11-02 23:55:18,347 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin LocalFileOutputDevice
2016-11-02 23:55:18,347 - WARNING - .../UM/PluginRegistry.py (loadPlugin [63]): Plugin ConsoleLogger was already loaded
2016-11-02 23:55:18,349 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin SimpleView
2016-11-02 23:55:18,350 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin WireframeView
2016-11-02 23:55:18,354 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin MirrorTool
2016-11-02 23:55:18,360 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin RotateTool
2016-11-02 23:55:18,362 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin CameraTool
2016-11-02 23:55:18,364 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin TranslateTool
2016-11-02 23:55:18,366 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin SelectionTool
2016-11-02 23:55:18,370 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin ScaleTool
2016-11-02 23:55:18,372 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin FileLogger
2016-11-02 23:55:18,373 - WARNING - /usr/lib/uranium/plugins/FileHandlers/STLReader/STLReader.py (
2016-11-02 23:55:18,374 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin STLReader
2016-11-02 23:55:18,375 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin OBJWriter
2016-11-02 23:55:18,377 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin OBJReader
2016-11-02 23:55:18,382 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin 3MFWriter
2016-11-02 23:55:18,384 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin STLWriter
2016-11-02 23:55:18,386 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin XRayView
2016-11-02 23:55:18,387 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin CuraProfileWriter
2016-11-02 23:55:18,389 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin AutoSave
2016-11-02 23:55:18,392 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin LayerView
2016-11-02 23:55:18,393 - WARNING - .../UM/PluginRegistry.py (loadPlugin [63]): Plugin CuraEngineBackend was already loaded
2016-11-02 23:55:18,395 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin X3DReader
2016-11-02 23:55:18,397 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin 3MFReader
2016-11-02 23:55:18,402 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin UltimakerMachineActions
2016-11-02 23:55:18,404 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin CuraProfileReader
2016-11-02 23:55:18,433 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin SliceInfoPlugin
2016-11-02 23:55:18,435 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin MachineSettingsAction
2016-11-02 23:55:18,438 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin SolidView
2016-11-02 23:55:18,440 - WARNING - .../UM/Preferences.py (getValue [70]): Tried to get the value of non-existing setting cura/active_mode.
2016-11-02 23:55:18,441 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin PerObjectSettingsTool
2016-11-02 23:55:18,457 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin XmlMaterialProfile
2016-11-02 23:55:18,470 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin USBPrinting
2016-11-02 23:55:18,479 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin ChangeLogPlugin
2016-11-02 23:55:18,483 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin VersionUpgrade21to22
2016-11-02 23:55:18,487 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin GCodeWriter
2016-11-02 23:55:18,491 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin RemovableDriveOutputDevice
2016-11-02 23:55:18,495 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin GCodeProfileReader
2016-11-02 23:55:18,497 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin LegacyProfileReader
2016-11-02 23:55:18,501 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Plugin Doodle3D uses an incompatible API version, ignoring
2016-11-02 23:55:18,504 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin ImageReader
2016-11-02 23:55:18,505 - INFO - .../UM/Qt/QtApplication.py (init [39]): Command line arguments: {'disable-textures': False, 'file': [], 'debug-mode': False, 'external-backend': False}
2016-11-02 23:55:18,509 - INFO - .../UM/VersionUpgradeManager.py (upgrade [98]): Looking for old configuration files to upgrade.
2016-11-02 23:55:18,544 - WARNING - .../UM/VersionUpgradeManager.py (_upgradeFile [275]): Can't open configuration file /home/morris/.local/share/cura/./user/Prusa+i3_current_settings.inst.cfg for reading.
2016-11-02 23:55:21,286 - WARNING - .../UM/VersionUpgradeManager.py (_upgradeFile [275]): Can't open configuration file /home/morris/.config/cura/././cura.cfg for reading.
2016-11-02 23:55:21,286 - WARNING - .../UM/VersionUpgradeManager.py (_upgradeFile [275]): Can't open configuration file /home/morris/.local/share/cura/./user/./Prusa+i3_current_settings.inst.cfg for reading.
2016-11-02 23:55:21,288 - DEBUG - .../UM/Backend/Backend.py (_logSocketState [165]): Socket state changed to Listening
2016-11-02 23:55:21,295 - INFO - .../UM/Backend/Backend.py (startEngine [55]): Started engine process: /usr/bin/CuraEngine
2016-11-02 23:55:21,296 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] Calling engine with: ['/usr/bin/CuraEngine', 'connect', '127.0.0.1:49674', '-j', '/usr/share/cura/resources/definitions/fdmprinter.def.json', '']
2016-11-02 23:55:21,298 - ERROR - .../UM/Preferences.py (_loadFile [156]): An exception occured while trying to read preferences file: 'general'
2016-11-02 23:55:21,303 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] [libprotobuf FATAL ./google/protobuf/repeated_field.h:1476] CHECK failed: (n) >= (0):
2016-11-02 23:55:21,312 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] terminate called after throwing an instance of 'google::protobuf::FatalException'
2016-11-02 23:55:21,312 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] what(): CHECK failed: (n) >= (0):
2016-11-02 23:55:21,542 - DEBUG - /usr/lib/cura/plugins/MachineSettingsAction/MachineSettingsAction.py (_onContainerAdded [40]): Not attaching MachineSettingsAction to ultimaker2_plus; Machines that use variants are not supported
2016-11-02 23:55:21,610 - DEBUG - /usr/lib/cura/plugins/MachineSettingsAction/MachineSettingsAction.py (_onContainerAdded [40]): Not attaching MachineSettingsAction to ultimaker2_extended_plus; Machines that use variants are not supported
2016-11-02 23:55:21,735 - DEBUG - /usr/lib/cura/plugins/MachineSettingsAction/MachineSettingsAction.py (_onContainerAdded [40]): Not attaching MachineSettingsAction to ultimaker_original_dual; Multi-extrusion printers are not supported
2016-11-02 23:55:21,797 - WARNING - .../cura/MachineActionManager.py (addSupportedAction [68]): Unable to add DiscoverUM3Action to ultimaker3_extended, as the action is not recognised
2016-11-02 23:55:21,797 - WARNING - .../cura/MachineActionManager.py (addFirstStartAction [79]): Unable to add DiscoverUM3Action to ultimaker3_extended, as the action is not recognised
2016-11-02 23:55:21,797 - DEBUG - /usr/lib/cura/plugins/MachineSettingsAction/MachineSettingsAction.py (_onContainerAdded [40]): Not attaching MachineSettingsAction to ultimaker3_extended; Multi-extrusion printers are not supported
2016-11-02 23:55:22,269 - WARNING - .../cura/MachineActionManager.py (addSupportedAction [68]): Unable to add DiscoverUM3Action to ultimaker3, as the action is not recognised
2016-11-02 23:55:22,269 - WARNING - .../cura/MachineActionManager.py (addFirstStartAction [79]): Unable to add DiscoverUM3Action to ultimaker3, as the action is not recognised
2016-11-02 23:55:22,270 - DEBUG - /usr/lib/cura/plugins/MachineSettingsAction/MachineSettingsAction.py (_onContainerAdded [40]): Not attaching MachineSettingsAction to ultimaker3; Multi-extrusion printers are not supported
2016-11-02 23:55:28,409 - ERROR - .../UM/Logger.py (logException [53]): Exception: Could not deserialize container Prusa i3_current_settings
2016-11-02 23:55:28,410 - ERROR - .../UM/Logger.py (logException [53]): Traceback (most recent call last):
2016-11-02 23:55:28,410 - ERROR - .../UM/Logger.py (logException [53]): File "/usr/lib/python3/dist-packages/UM/Settings/ContainerRegistry.py", line 237, in load
2016-11-02 23:55:28,410 - ERROR - .../UM/Logger.py (logException [53]): with open(file_path, encoding = "utf-8") as f:
2016-11-02 23:55:28,410 - ERROR - .../UM/Logger.py (logException [53]): PermissionError: [Errno 13] Permesso negato: '/home/morris/.local/share/cura/user/Prusa+i3_current_settings.inst.cfg'
2016-11-02 23:55:28,412 - DEBUG - .../UM/Settings/ContainerStack.py (deserialize [229]): While deserializing, we got the following container string: Prusa i3_current_settings,empty_quality_changes,normal,generic_abs #2,Prusa i3_variant,prusa_i3,
2016-11-02 23:55:28,413 - ERROR - .../UM/Logger.py (logException [53]): Exception: Could not deserialize container Prusa i3
2016-11-02 23:55:28,415 - ERROR - .../UM/Logger.py (logException [53]): Traceback (most recent call last):
2016-11-02 23:55:28,416 - ERROR - .../UM/Logger.py (logException [53]): File "/usr/lib/python3/dist-packages/UM/Settings/ContainerRegistry.py", line 238, in load
2016-11-02 23:55:28,416 - ERROR - .../UM/Logger.py (logException [53]): new_container.deserialize(f.read())
2016-11-02 23:55:28,417 - ERROR - .../UM/Logger.py (logException [53]): File "/usr/lib/python3/dist-packages/UM/Settings/ContainerStack.py", line 256, in deserialize
2016-11-02 23:55:28,417 - ERROR - .../UM/Logger.py (logException [53]): raise Exception("When trying to deserialize %s, we received an unknown ID (%s) for container" % (self._id, container_id))
2016-11-02 23:55:28,418 - ERROR - .../UM/Logger.py (logException [53]): Exception: When trying to deserialize Prusa i3, we received an unknown ID (Prusa i3_current_settings) for container
2016-11-02 23:55:28,422 - DEBUG - /usr/lib/cura/plugins/CuraEngineBackend/CuraEngineBackend.py (_onBackendQuit [424]): Backend quit with return code -6. Resetting process and socket.
2016-11-02 23:55:28,423 - DEBUG - .../UM/Backend/Backend.py (_createSocket [206]): Previous socket existed. Closing that first.
2016-11-02 23:55:28,426 - DEBUG - .../UM/Controller.py (setActiveView [80]): Setting active view to SolidView
2016-11-02 23:55:28,441 - DEBUG - .../UM/Backend/Backend.py (_logSocketState [165]): Socket state changed to Listening
2016-11-02 23:55:28,455 - INFO - .../UM/Backend/Backend.py (startEngine [55]): Started engine process: /usr/bin/CuraEngine
2016-11-02 23:55:28,455 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] Calling engine with: ['/usr/bin/CuraEngine', 'connect', '127.0.0.1:49674', '-j', '/usr/share/cura/resources/definitions/fdmprinter.def.json', '']
2016-11-02 23:55:29,051 - DEBUG - .../UM/Qt/Bindings/Theme.py (load [118]): Loading theme file: /usr/share/cura/resources/themes/cura/theme.json
2016-11-02 23:55:29,178 - DEBUG - .../UM/Qt/Bindings/Theme.py (load [118]): Loaded theme /usr/share/cura/resources/themes/cura
QObject::connect: Parentheses expected, signal MainWindow::
QObject::connect: Parentheses expected, signal MainWindow::
QObject::connect: Parentheses expected, signal MainWindow::
2016-11-02 23:55:29,270 - WARNING - .../cura/Settings/ContainerManager.py (getContainerMetaDataEntry [171]): Could not get metadata of container because it was not found.
Errore di segmentazione (core dump creato)
Freefly13
on 3 Nov 2016
@Freefly13 It is failing because it cannot write to ~/.local/share/cura because you ran it as root before. You should either delete the ~/.local/share/cura and ~/.config/cura directories and restart as non-root or fix the permissions of those directories.
awhiemstra
on 3 Nov 2016
I have delete ~/.local/share/cura and ~/.config/cura and restart cura without sudo but the aren't fix the problem
this is the log:
cura
An exception occured while trying to read preferences file: 'general'
2016-11-03 15:45:51,714 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin ConsoleLogger
2016-11-03 15:45:51,726 - INFO - /usr/lib/cura/plugins/CuraEngineBackend/CuraEngineBackend.py (init [40]): Found CuraEngine at: /usr/bin/CuraEngine
2016-11-03 15:45:51,727 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin CuraEngineBackend
2016-11-03 15:45:51,730 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin LocalFileOutputDevice
2016-11-03 15:45:51,730 - WARNING - .../UM/PluginRegistry.py (loadPlugin [63]): Plugin ConsoleLogger was already loaded
2016-11-03 15:45:51,732 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin SimpleView
2016-11-03 15:45:51,733 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin WireframeView
2016-11-03 15:45:51,736 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin MirrorTool
2016-11-03 15:45:51,742 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin RotateTool
2016-11-03 15:45:51,744 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin CameraTool
2016-11-03 15:45:51,746 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin TranslateTool
2016-11-03 15:45:51,747 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin SelectionTool
2016-11-03 15:45:51,752 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin ScaleTool
2016-11-03 15:45:51,753 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin FileLogger
2016-11-03 15:45:51,754 - WARNING - /usr/lib/uranium/plugins/FileHandlers/STLReader/STLReader.py (
2016-11-03 15:45:51,755 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin STLReader
2016-11-03 15:45:51,756 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin OBJWriter
2016-11-03 15:45:51,758 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin OBJReader
2016-11-03 15:45:51,763 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin 3MFWriter
2016-11-03 15:45:51,764 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin STLWriter
2016-11-03 15:45:51,766 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin XRayView
2016-11-03 15:45:51,768 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin CuraProfileWriter
2016-11-03 15:45:51,770 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin AutoSave
2016-11-03 15:45:51,773 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin LayerView
2016-11-03 15:45:51,773 - WARNING - .../UM/PluginRegistry.py (loadPlugin [63]): Plugin CuraEngineBackend was already loaded
2016-11-03 15:45:51,775 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin X3DReader
2016-11-03 15:45:51,777 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin 3MFReader
2016-11-03 15:45:51,781 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin UltimakerMachineActions
2016-11-03 15:45:51,783 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin CuraProfileReader
2016-11-03 15:45:51,810 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin SliceInfoPlugin
2016-11-03 15:45:51,813 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin MachineSettingsAction
2016-11-03 15:45:51,815 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin SolidView
2016-11-03 15:45:51,818 - WARNING - .../UM/Preferences.py (getValue [70]): Tried to get the value of non-existing setting cura/active_mode.
2016-11-03 15:45:51,818 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin PerObjectSettingsTool
2016-11-03 15:45:51,832 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin XmlMaterialProfile
2016-11-03 15:45:51,841 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin USBPrinting
2016-11-03 15:45:51,848 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin ChangeLogPlugin
2016-11-03 15:45:51,853 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin VersionUpgrade21to22
2016-11-03 15:45:51,856 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin GCodeWriter
2016-11-03 15:45:51,859 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin RemovableDriveOutputDevice
2016-11-03 15:45:51,863 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin GCodeProfileReader
2016-11-03 15:45:51,866 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin LegacyProfileReader
2016-11-03 15:45:51,870 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Plugin Doodle3D uses an incompatible API version, ignoring
2016-11-03 15:45:51,873 - INFO - .../UM/PluginRegistry.py (loadPlugin [63]): Loaded plugin ImageReader
2016-11-03 15:45:51,874 - INFO - .../UM/Qt/QtApplication.py (init [39]): Command line arguments: {'debug-mode': False, 'external-backend': False, 'file': [], 'disable-textures': False}
2016-11-03 15:45:51,888 - INFO - .../UM/VersionUpgradeManager.py (upgrade [98]): Looking for old configuration files to upgrade.
2016-11-03 15:45:51,902 - WARNING - .../UM/VersionUpgradeManager.py (_upgradeFile [275]): Can't open configuration file /home/morris/.config/cura/././cura.cfg for reading.
2016-11-03 15:45:51,903 - WARNING - .../UM/VersionUpgradeManager.py (_upgradeFile [275]): Can't open configuration file /home/morris/.local/share/cura/./machine_instances/Prusa+i3.stack.cfg for reading.
2016-11-03 15:45:51,904 - WARNING - .../UM/VersionUpgradeManager.py (_upgradeFile [275]): Can't open configuration file /home/morris/.local/share/cura/./user/Prusa+i3_current_settings.inst.cfg for reading.
2016-11-03 15:45:54,555 - WARNING - .../UM/VersionUpgradeManager.py (_upgradeFile [275]): Can't open configuration file /home/morris/.local/share/cura/./user/./Prusa+i3_current_settings.inst.cfg for reading.
2016-11-03 15:45:54,555 - WARNING - .../UM/VersionUpgradeManager.py (_upgradeFile [275]): Can't open configuration file /home/morris/.local/share/cura/./machine_instances/./Prusa+i3.stack.cfg for reading.
2016-11-03 15:45:54,557 - DEBUG - .../UM/Backend/Backend.py (_logSocketState [165]): Socket state changed to Listening
2016-11-03 15:45:54,568 - INFO - .../UM/Backend/Backend.py (startEngine [55]): Started engine process: /usr/bin/CuraEngine
2016-11-03 15:45:54,569 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] Calling engine with: ['/usr/bin/CuraEngine', 'connect', '127.0.0.1:49674', '-j', '/usr/share/cura/resources/definitions/fdmprinter.def.json', '']
2016-11-03 15:45:54,570 - ERROR - .../UM/Preferences.py (_loadFile [156]): An exception occured while trying to read preferences file: 'general'
2016-11-03 15:45:55,030 - DEBUG - /usr/lib/cura/plugins/MachineSettingsAction/MachineSettingsAction.py (_onContainerAdded [40]): Not attaching MachineSettingsAction to ultimaker_original_dual; Multi-extrusion printers are not supported
2016-11-03 15:45:55,182 - DEBUG - /usr/lib/cura/plugins/MachineSettingsAction/MachineSettingsAction.py (_onContainerAdded [40]): Not attaching MachineSettingsAction to ultimaker2_plus; Machines that use variants are not supported
2016-11-03 15:45:55,214 - DEBUG - /usr/lib/cura/plugins/MachineSettingsAction/MachineSettingsAction.py (_onContainerAdded [40]): Not attaching MachineSettingsAction to ultimaker2_extended_plus; Machines that use variants are not supported
2016-11-03 15:45:55,243 - WARNING - .../cura/MachineActionManager.py (addSupportedAction [68]): Unable to add DiscoverUM3Action to ultimaker3_extended, as the action is not recognised
2016-11-03 15:45:55,244 - WARNING - .../cura/MachineActionManager.py (addFirstStartAction [79]): Unable to add DiscoverUM3Action to ultimaker3_extended, as the action is not recognised
2016-11-03 15:45:55,244 - DEBUG - /usr/lib/cura/plugins/MachineSettingsAction/MachineSettingsAction.py (_onContainerAdded [40]): Not attaching MachineSettingsAction to ultimaker3_extended; Multi-extrusion printers are not supported
2016-11-03 15:45:55,690 - WARNING - .../cura/MachineActionManager.py (addSupportedAction [68]): Unable to add DiscoverUM3Action to ultimaker3, as the action is not recognised
2016-11-03 15:45:55,690 - WARNING - .../cura/MachineActionManager.py (addFirstStartAction [79]): Unable to add DiscoverUM3Action to ultimaker3, as the action is not recognised
2016-11-03 15:45:55,690 - DEBUG - /usr/lib/cura/plugins/MachineSettingsAction/MachineSettingsAction.py (_onContainerAdded [40]): Not attaching MachineSettingsAction to ultimaker3; Multi-extrusion printers are not supported
2016-11-03 15:46:01,374 - ERROR - .../UM/Logger.py (logException [53]): Exception: Could not deserialize container Prusa i3_current_settings
2016-11-03 15:46:01,374 - ERROR - .../UM/Logger.py (logException [53]): Traceback (most recent call last):
2016-11-03 15:46:01,374 - ERROR - .../UM/Logger.py (logException [53]): File "/usr/lib/python3/dist-packages/UM/Settings/ContainerRegistry.py", line 237, in load
2016-11-03 15:46:01,374 - ERROR - .../UM/Logger.py (logException [53]): with open(file_path, encoding = "utf-8") as f:
2016-11-03 15:46:01,375 - ERROR - .../UM/Logger.py (logException [53]): PermissionError: [Errno 13] Permesso negato: '/home/morris/.local/share/cura/user/Prusa+i3_current_settings.inst.cfg'
2016-11-03 15:46:01,376 - ERROR - .../UM/Logger.py (logException [53]): Exception: Could not deserialize container Prusa i3
2016-11-03 15:46:01,376 - ERROR - .../UM/Logger.py (logException [53]): Traceback (most recent call last):
2016-11-03 15:46:01,376 - ERROR - .../UM/Logger.py (logException [53]): File "/usr/lib/python3/dist-packages/UM/Settings/ContainerRegistry.py", line 237, in load
2016-11-03 15:46:01,376 - ERROR - .../UM/Logger.py (logException [53]): with open(file_path, encoding = "utf-8") as f:
2016-11-03 15:46:01,376 - ERROR - .../UM/Logger.py (logException [53]): PermissionError: [Errno 13] Permesso negato: '/home/morris/.local/share/cura/machine_instances/Prusa+i3.stack.cfg'
2016-11-03 15:46:01,378 - DEBUG - /usr/lib/cura/plugins/CuraEngineBackend/CuraEngineBackend.py (_onBackendQuit [424]): Backend quit with return code -11. Resetting process and socket.
2016-11-03 15:46:01,379 - DEBUG - .../UM/Backend/Backend.py (_createSocket [206]): Previous socket existed. Closing that first.
2016-11-03 15:46:01,380 - DEBUG - .../UM/Controller.py (setActiveView [80]): Setting active view to SolidView
2016-11-03 15:46:01,391 - DEBUG - .../UM/Backend/Backend.py (_logSocketState [165]): Socket state changed to Listening
2016-11-03 15:46:01,403 - INFO - .../UM/Backend/Backend.py (startEngine [55]): Started engine process: /usr/bin/CuraEngine
2016-11-03 15:46:01,403 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] Calling engine with: ['/usr/bin/CuraEngine', 'connect', '127.0.0.1:49674', '-j', '/usr/share/cura/resources/definitions/fdmprinter.def.json', '']
2016-11-03 15:46:01,416 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] [libprotobuf FATAL ./google/protobuf/repeated_field.h:1476] CHECK failed: (n) >= (0):
2016-11-03 15:46:01,417 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] terminate called after throwing an instance of 'google::protobuf::FatalException'
2016-11-03 15:46:01,418 - DEBUG - .../UM/Backend/Backend.py (_backendLog [88]): [Backend] what(): CHECK failed: (n) >= (0):
2016-11-03 15:46:02,000 - DEBUG - .../UM/Qt/Bindings/Theme.py (load [118]): Loading theme file: /usr/share/cura/resources/themes/cura/theme.json
2016-11-03 15:46:02,114 - DEBUG - .../UM/Qt/Bindings/Theme.py (load [118]): Loaded theme /usr/share/cura/resources/themes/cura
QObject::connect: Parentheses expected, signal MainWindow::
QObject::connect: Parentheses expected, signal MainWindow::
QObject::connect: Parentheses expected, signal MainWindow::
2016-11-03 15:46:02,206 - WARNING - .../cura/Settings/ContainerManager.py (getContainerMetaDataEntry [171]): Could not get metadata of container because it was not found.
Segmentation fault (core dump created)
Freefly13
on 3 Nov 2016
Hey, any updates on this at all? The AppImage for Cura 2.3.1 segfaults too.
adomasven
on 5 Dec 2016
@adomasven AppImage or PPA?
thopiekar
on 15 Dec 2016
Right, there's actually a separate issue regarding 2.3.1 AppImage segfaulting here (in case anyone wonders).
Regarding PPA, same problem persists. I saw cura being upgraded the other day as part of a system update, but no changes - still segfaulting. So the question remains - any updates on this?
adomasven
on 15 Dec 2016
Regarding my PPA: If you are using Unity: No, the problem is known and comes from Unity in some way. You should report the problem at launchpad or even look for issues, which are already open in Launchpad, and mark there that this problem "affects you", too. By doing this the issue might get an higher priority and Canonical will probably take care about it sooner.
My only solution now is simply not to use Unity. Since I use KDE daily and MATE on slow systems, I don't face this problem.
thopiekar
on 15 Dec 2016
I've been using Unity for years with Cura. The last problem I had with it (blanco menus at random) was fixed by upgrading to Ubuntu 16.10. But that's from source.
Ghostkeeper
on 16 Dec 2016
I think I have the same problem on Ubuntu 16.10 with Cura 2.4 (PPA).
@thopiekar Do you know what exactly causes the issue on Unity? If there is an issue on Launchpad, can you post a link?
claell
on 25 Dec 2016
Hey @claell ,
I remember that I debugged the problem in the past with an user and @awhiemstra here on Github.
It happens somewhere between Qt5 and DBus. If I'm not wrong happens in Unity as it is using Qt5+DBus for the external menu bar. The strange thing is that we are already disabling this menubar, but Unity seems to force the usage of it (?).
I'm don't know of a issue ticket on this, but since Qt is a commonly used toolkit, another project should also already ran into it.
thopiekar
on 25 Dec 2016
Not necessarily, this issue is specifically about the QML Menu component. Most other applications will just be using a QWidgets based menu bar, which probably works fine. The QML version however triggers the crash.
awhiemstra
on 27 Dec 2016
Could someone with knowledge please file a bug report or point to an existing one? I think I am not experienced enough to create or find one.
claell
on 30 Dec 2016
Here is a direct link to creating a new issue: https://github.com/Ultimaker/Cura/issues/new
Just need to write in a title and detailed description of the problem
nickthetait
on 30 Dec 2016
What I meant is to create an issue on Launchpad so the Ubuntu developers can fix this.
claell
on 30 Dec 2016
@claell Ah, you are talking about the problem with Unity?
thopiekar
on 30 Dec 2016
Yes
claell
on 30 Dec 2016
I would report the bug here: https://bugs.launchpad.net/ubuntu/+source/unity
Maybe also attach the Qt5 package related to this issue, so the Qt5 maintainers also get notified about this problem.
thopiekar
on 30 Dec 2016
Alright, I created a bug report: https://bugs.launchpad.net/ubuntu/+source/unity/+bug/1653345
Since I don't know much about this I hope it is enough. Else feel free to add more information.
claell
on 31 Dec 2016
Thanks. I also added some info to it.
To the others with the problem: If you have a launchpad account, please visit the ticket and mark yourself there that this issue 'affects' you. This will make the issue more important in Canonicals issue tracker.
Regards and happy new year!
thopiekar
on 31 Dec 2016
That's very unfortunate. Is there a work around for now, short of changing desktop environment completely? I would quite like to keep using Cura.
skorokithakis
on 5 Jan 2017
Sadly no. I installed Unity here on my own and compared the environment variables between the both desktop sessions.
While doing this I removed and changed some of them in order to simulate my KDE session and I still couldn't get it work.
I just can hope that someone at Canonical will find a solution or even workaround soon, so people won't need to install another desktop in order to use Cura.
thopiekar
on 5 Jan 2017
@awhiemstra Do you remember whether we located which patch file causes this problem? I can only remember that we found out that an unpatched Qt5 installation (as we are using it in our AppImages) just works fine.
If it is really related to a Ubuntu patch and not included here (https://anonscm.debian.org/cgit/pkg-kde/qt/qtbase.git/tree/debian/patches), then I can try to set up a separate PPA with nightly builds of Qt5 using the packaging files from Debian.
@skorokithakis Alternatively you can try our AppImage. You can find it in our beta section on our download page.
thopiekar
on 5 Jan 2017
Thank you, the AppImage sounds great.
skorokithakis
on 5 Jan 2017
Do you have a link to an AppImage for 2.4.0? All I found (after considerable searching) was one for 2.3.1.
skorokithakis
on 5 Jan 2017
You can find the end of the list at: https://ultimaker.com/en/products/cura-software/list
thopiekar
on 5 Jan 2017
Ah, thanks. That really should say "AppImage" somewhere.
skorokithakis
on 5 Jan 2017
The AppImage works perfectly, thank you.
skorokithakis
on 5 Jan 2017
@thopiekar It is one of the dbusmenu related patches in the ubuntu source package. I can't recall which one precisely. In any case, they are not in the debian packages as far as I can tell.
awhiemstra
on 5 Jan 2017
Same here, as of today, Jan 2018.
Using cura (PPA):
1:2.7.0~201710052034~rev2203~pkg168~ubuntu17.10.1
Still no fix on the horizon..
corbolais
on 20 Jan 2018
Related issues
DmitryBychkov
路
3Comments
StanislavJochman
路
3Comments
muhammadelmogy
路
3Comments
jornada812
路
3Comments
mnswamp1
路
3Comments
Most helpful comment
Well there's your issue... sounds like this is an upstream bug.