Courseplay: Baler does not unload by its own

[Th301]

Since one of the last updates, the combi machine to wrap silage bales does not unload by its own anymore.

I use
FS19 AUTOMATIC UNLOADING FOR BALE WRAPPERS
and
Round Baler Extension v1.0 FS19
for this work. Last time I saw this work fine was on friday I think.

I know, this is perhaps a mod-conflict but it worked perfectly before! ^^

[Tensuko]

Did you try without the mods ?
Try one by one to find out wich of the two mods causing the conflict.

[Th301]

I just made the tests you suggested.

I tested with:

• both mods active
• with none of the two mods active
• with only Automatic Unload active
• with only Round Baler Extension active.

Nothing worked :(

[ncolton]

~I wish I had updated CoursePlay more recently as I could give you a narrower range, but I also found this behavior. Somewhere between 6.01.00110 and 6.01.00160 is when the baler ceased auto-unloading.~

After looking at the recent commit history, I figured I'd spend a little bit of time poking at things.

6.01.00160 exhibits the problem behavior
6.01.00159 exhibits the problem behavior
6.01.00158 does not exhibit the problem behavior

So unfortunately the bale wrapper support introduced in 9b65a7cf0a659f993102f4b3c59b64de3228ce62 somehow did the opposite for the baler I use, at least.

In my case, I am not using either of the two mods Round Baler Extension or the auto-unload mod.

The device I'm using is the KUHN FBP 3135, in case it matters.

[pvaiko]

Thanks, I know exactly where I screwed it up, the tools which are balers _and_ bale wrappers don't work as balers at the moment.

[Tensuko]

Try with 161 and report back pls.

[Th301]

I will try it in the evening.

One question before: should it work without one of the extensions I mentioned in the initial post?

I think I will just make the same tests like before, with all combinations. This will keep up the comparability.

[Tensuko]

That would be nice if you can test all situations to make sure it works fine now.

[hsvfreak]

Befor the unload-problem the Kuhn FBP 3135 was wrapping while he was baling and has only wait, when the wrapping needs more time then the filling of the Baler. Now it waits until it finisched the wrapping and starts then to fill the baler again. Could it be changed or isn't it possible?

[pvaiko]

Should work now for balers, bale wrappers and the combination of the two.

[ninjayx02]

have you the auto unload mod set to automatically unload bales

[Tensuko]

CP got nothing to do with that mod.

[iljarogoff]

Works fine with .00162

[jspring0811]

have you the auto unload mod set to automatically unload bales

To expand on what ninjayx02 said... For Automatic Unload mod, baler-wrapper, you have to "Z key" change drop mode: Manual/Collect/Automatic (and you can also "LCtrl-LAlt" key toggle wrap on/off). For wrapper-only, "Z key" change drop mode Manual/Automatic.

[Tensuko]

Still dont know what it got to do with cp...
As this is only for using on your own, not cp controlled. Why would you want to manual unload when cp does the work.

Explain a bit more what you expect to happen with that mod in combination with cp...

[ninjayx02]

if you have the auto unload mod in game, then the settings affect courseplay, e.g. set the baler to for manual unload and courseplay creates the bale, wraps the bale, then stops because of the manual unload function of the auto unload. Try it and see

[pvaiko]

Original issue solved, closing.

[Th301]

Sorry, I found no time to test yesterday.
But reading all the comments, I think it should work now :)