Arduino-cli: SIGSEGV when compiling for custom boards

Created on 27 Mar 2019  路  9Comments  路  Source: arduino/arduino-cli

I noticed a problem when I try compiling a sketch for a custom board.

~$ ./arduino-cli compile --fqbn anet:avr:anet Marlin/
panic: runtime error: invalid memory address or nil pointer dereference
[signal SIGSEGV: segmentation violation code=0x1 addr=0x34 pc=0x2cf560]

goroutine 1 [running]:
github.com/arduino/arduino-cli/arduino/cores.(*PlatformRelease).GetLibrariesDir(0x0, 0x17230)
        /home/jenkins/workspace/arduino-cli/src/github.com/arduino/arduino-cli/arduino/cores/cores.go:210 +0x2c
github.com/arduino/arduino-cli/arduino/libraries/librariesmanager.(*LibrariesManager).AddPlatformReleaseLibrariesDir(0x12a17600, 0x0, 0x4)
        /home/jenkins/workspace/arduino-cli/src/github.com/arduino/arduino-cli/arduino/libraries/librariesmanager/librariesmanager.go:138 +0x1c
github.com/arduino/arduino-cli/vendor/github.com/arduino/arduino-builder.(*LibrariesLoader).Run(0x818d70, 0x12a461e0, 0x818d70, 0x0)
        /home/jenkins/workspace/arduino-cli/src/github.com/arduino/arduino-cli/vendor/github.com/arduino/arduino-builder/libraries_loader.go:62 +0x3f0
github.com/arduino/arduino-cli/vendor/github.com/arduino/arduino-builder.(*ContainerSetupHardwareToolsLibsSketchAndProps).Run(0x818d70, 0x12a461e0, 0x818d70, 0x0)
        /home/jenkins/workspace/arduino-cli/src/github.com/arduino/arduino-cli/vendor/github.com/arduino/arduino-builder/container_setup.go:63 +0x2a8
github.com/arduino/arduino-cli/vendor/github.com/arduino/arduino-builder.runCommands(0x12a461e0, 0x12843b9c, 0x22, 0x22, 0x1, 0x0, 0x0)
        /home/jenkins/workspace/arduino-cli/src/github.com/arduino/arduino-cli/vendor/github.com/arduino/arduino-builder/builder.go:191 +0xc4
github.com/arduino/arduino-cli/vendor/github.com/arduino/arduino-builder.(*Builder).Run(0x12843cc0, 0x12a461e0, 0x58b470, 0x12a127d0)
        /home/jenkins/workspace/arduino-cli/src/github.com/arduino/arduino-cli/vendor/github.com/arduino/arduino-builder/builder.go:109 +0x98c
github.com/arduino/arduino-cli/vendor/github.com/arduino/arduino-builder.RunBuilder(0x12a461e0, 0x0, 0x58b470)
        /home/jenkins/workspace/arduino-cli/src/github.com/arduino/arduino-cli/vendor/github.com/arduino/arduino-builder/builder.go:207 +0x24
github.com/arduino/arduino-cli/commands/compile.run(0x128d5400, 0x129600e0, 0x1, 0x3)
        /home/jenkins/workspace/arduino-cli/src/github.com/arduino/arduino-cli/commands/compile/compile.go:240 +0x1090
github.com/arduino/arduino-cli/vendor/github.com/spf13/cobra.(*Command).execute(0x128d5400, 0x129600a0, 0x3, 0x4, 0x128d5400, 0x129600a0)
        /home/jenkins/workspace/arduino-cli/src/github.com/arduino/arduino-cli/vendor/github.com/spf13/cobra/command.go:766 +0x20c
github.com/arduino/arduino-cli/vendor/github.com/spf13/cobra.(*Command).ExecuteC(0x128d4c80, 0x1295c3c0, 0x128d5900, 0x128d5540)
        /home/jenkins/workspace/arduino-cli/src/github.com/arduino/arduino-cli/vendor/github.com/spf13/cobra/command.go:852 +0x20c
github.com/arduino/arduino-cli/vendor/github.com/spf13/cobra.(*Command).Execute(0x128d4c80, 0x3cecc, 0x440a14)
        /home/jenkins/workspace/arduino-cli/src/github.com/arduino/arduino-cli/vendor/github.com/spf13/cobra/command.go:800 +0x1c
main.main()
        /home/jenkins/workspace/arduino-cli/src/github.com/arduino/arduino-cli/main.go:30 +0x18

Here is the output with the --debug flag:

~$ ./arduino-cli compile --fqbn anet:avr:anet Marlin/ --debug
INFO[0000] Checking for config file in: /home/renaud/.arduino15/arduino-cli.yaml
INFO[0000] Reading configuration from /home/renaud/.arduino15/arduino-cli.yaml
INFO[0000] Checking if CLI is Bundled into the IDE
INFO[0000] Candidate IDE Directory: /home/renaud
INFO[0000] CLI is not bundled into the IDE
INFO[0000] Checking for config in: /arduino-cli.yaml
INFO[0000] error loading                                 error="open /arduino-cli.yaml: no such file or directory"
INFO[0000] Checking for config in: /home/arduino-cli.yaml
INFO[0000] error loading                                 error="open /home/arduino-cli.yaml: no such file or directory"
INFO[0000] Checking for config in: /home/renaud/arduino-cli.yaml
INFO[0000] error loading                                 error="open /home/renaud/arduino-cli.yaml: no such file or directory"
INFO[0000] Configuration set
INFO[0000] arduino-cli-0.3.6-alpha.preview
INFO[0000] Starting root command preparation (`arduino`)
INFO[0000] Formatter set
INFO[0000] Executing `arduino compile`
INFO[0000] Initializing package manager
INFO[0000] Loading hardware from: /home/renaud/.arduino15/packages
INFO[0000] Loading package Sanguino from: /home/renaud/.arduino15/packages/Sanguino/hardware
INFO[0000] Loading package arduino from: /home/renaud/.arduino15/packages/arduino/hardware
INFO[0000] Checking existence of 'tools' path: /home/renaud/.arduino15/packages/arduino/tools
INFO[0000] Loading tools from dir: /home/renaud/.arduino15/packages/arduino/tools
INFO[0000] Loading package builtin from: /home/renaud/.arduino15/packages/builtin
INFO[0000] Checking existence of 'tools' path: /home/renaud/.arduino15/packages/builtin/tools
INFO[0000] Loading tools from dir: /home/renaud/.arduino15/packages/builtin/tools
INFO[0000] Loaded tool                                   tool="builtin:[email protected]"
INFO[0000] Loading hardware from: /home/renaud/Arduino/hardware
INFO[0000] Loading package anet from: /home/renaud/Arduino/hardware/anet
INFO[0000] Loaded platform                               platform="anet:avr@"
Ts: 1553687869 - Running: GenerateBuildPathIfMissing
Setting build path to /tmp/arduino-sketch-E96CAEBD9ABAE19B046369917BB51116
Ts: 1553687869 - Running: EnsureBuildPathExists
Ts: 1553687869 - Running: ContainerSetupHardwareToolsLibsSketchAndProps
Ts: 1553687869 - Running: AddAdditionalEntriesToContext
Ts: 1553687869 - Running: FailIfBuildPathEqualsSketchPath
Ts: 1553687869 - Running: HardwareLoader
Ts: 1553687869 - Running: PlatformKeysRewriteLoader
Ts: 1553687869 - Running: RewriteHardwareKeys
Ts: 1553687869 - Running: TargetBoardResolver
Ts: 1553687869 - Running: ToolsLoader
INFO[0000] Searching tools required for board anet:avr:anet
Ts: 1553687869 - Running: AddBuildBoardPropertyIfMissing
Ts: 1553687869 - Running: LibrariesLoader
panic: runtime error: invalid memory address or nil pointer dereference
[signal SIGSEGV: segmentation violation code=0x1 addr=0x34 pc=0x2cf560]

goroutine 1 [running]:
github.com/arduino/arduino-cli/arduino/cores.(*PlatformRelease).GetLibrariesDir(0x0, 0x17230)
        /home/jenkins/workspace/arduino-cli/src/github.com/arduino/arduino-cli/arduino/cores/cores.go:210 +0x2c
github.com/arduino/arduino-cli/arduino/libraries/librariesmanager.(*LibrariesManager).AddPlatformReleaseLibrariesDir(0x12c035e0, 0x0, 0x4)
        /home/jenkins/workspace/arduino-cli/src/github.com/arduino/arduino-cli/arduino/libraries/librariesmanager/librariesmanager.go:138 +0x1c
github.com/arduino/arduino-cli/vendor/github.com/arduino/arduino-builder.(*LibrariesLoader).Run(0x818d70, 0x12c341e0, 0x818d70, 0x0)
        /home/jenkins/workspace/arduino-cli/src/github.com/arduino/arduino-cli/vendor/github.com/arduino/arduino-builder/libraries_loader.go:62 +0x3f0
github.com/arduino/arduino-cli/vendor/github.com/arduino/arduino-builder.(*ContainerSetupHardwareToolsLibsSketchAndProps).Run(0x818d70, 0x12c341e0, 0x818d70, 0x0)
        /home/jenkins/workspace/arduino-cli/src/github.com/arduino/arduino-cli/vendor/github.com/arduino/arduino-builder/container_setup.go:63 +0x2a8
github.com/arduino/arduino-cli/vendor/github.com/arduino/arduino-builder.runCommands(0x12c341e0, 0x12a43b9c, 0x22, 0x22, 0x1, 0x0, 0x0)
        /home/jenkins/workspace/arduino-cli/src/github.com/arduino/arduino-cli/vendor/github.com/arduino/arduino-builder/builder.go:191 +0xc4
github.com/arduino/arduino-cli/vendor/github.com/arduino/arduino-builder.(*Builder).Run(0x12a43cc0, 0x12c341e0, 0x58b470, 0x12c084a0)
        /home/jenkins/workspace/arduino-cli/src/github.com/arduino/arduino-cli/vendor/github.com/arduino/arduino-builder/builder.go:109 +0x98c
github.com/arduino/arduino-cli/vendor/github.com/arduino/arduino-builder.RunBuilder(0x12c341e0, 0x0, 0x58b470)
        /home/jenkins/workspace/arduino-cli/src/github.com/arduino/arduino-cli/vendor/github.com/arduino/arduino-builder/builder.go:207 +0x24
github.com/arduino/arduino-cli/commands/compile.run(0x12ac9540, 0x12b4e0a0, 0x1, 0x4)
        /home/jenkins/workspace/arduino-cli/src/github.com/arduino/arduino-cli/commands/compile/compile.go:240 +0x1090
github.com/arduino/arduino-cli/vendor/github.com/spf13/cobra.(*Command).execute(0x12ac9540, 0x12b4e060, 0x4, 0x4, 0x12ac9540, 0x12b4e060)
        /home/jenkins/workspace/arduino-cli/src/github.com/arduino/arduino-cli/vendor/github.com/spf13/cobra/command.go:766 +0x20c
github.com/arduino/arduino-cli/vendor/github.com/spf13/cobra.(*Command).ExecuteC(0x12ac8dc0, 0x12b4a500, 0x12ac9a40, 0x12ac9680)
        /home/jenkins/workspace/arduino-cli/src/github.com/arduino/arduino-cli/vendor/github.com/spf13/cobra/command.go:852 +0x20c
github.com/arduino/arduino-cli/vendor/github.com/spf13/cobra.(*Command).Execute(0x12ac8dc0, 0x3cecc, 0x440a14)
        /home/jenkins/workspace/arduino-cli/src/github.com/arduino/arduino-cli/vendor/github.com/spf13/cobra/command.go:800 +0x1c
main.main()
        /home/jenkins/workspace/arduino-cli/src/github.com/arduino/arduino-cli/main.go:30 +0x18

The problem does not appear when arduino:avr is installed.

bug
Source
picture Renaud11232

All 9 comments

Please provide instructions for how you installed the anet:avr package so we can attempt to reproduce the issue.

Does the issue only occur when you're compiling Marlin, or does it also occur if you are compiling a minimal sketch like examples/01.Basics/BareMinimum?

per1234 picture per1234 on 28 Mar 2019

Hello,
I've downloaded the anet:avr package here and placed the content of the hardware folder into ~/Arduino/hardware
Once that was installed i just ran ./arduino-cli compile --fqbn anet:avr:anet Marlin/ wich gave me the error.
The issue also occur when I try to compile BareMinimum.
The problem also exists on Windows with the package installed in C:\Users\gaspa\Documents\Arduino\hardware, also failing with BareMinimum.

void setup() {
}

void loop() {
}

PS C:\Users\gaspa\Downloads> .\arduino-cli.exe compile --fqbn anet:avr:anet .\BareMinimum
panic: runtime error: invalid memory address or nil pointer dereference
[signal 0xc0000005 code=0x0 addr=0x34 pc=0x6a58ed]

goroutine 1 [running]:
github.com/arduino/arduino-cli/arduino/cores.(*PlatformRelease).GetLibrariesDir(0x0, 0x20)
        /home/jenkins/workspace/arduino-cli/src/github.com/arduino/arduino-cli/arduino/cores/cores.go:210 +0x2d
github.com/arduino/arduino-cli/arduino/libraries/librariesmanager.(*LibrariesManager).AddPlatformReleaseLibrariesDir(0x11c1e840, 0x0, 0x4)
        /home/jenkins/workspace/arduino-cli/src/github.com/arduino/arduino-cli/arduino/libraries/librariesmanager/librariesmanager.go:138 +0x25
github.com/arduino/arduino-cli/vendor/github.com/arduino/arduino-builder.(*LibrariesLoader).Run(0xc1248c, 0x11c4e1e0, 0xc1248c, 0x0)
        /home/jenkins/workspace/arduino-cli/src/github.com/arduino/arduino-cli/vendor/github.com/arduino/arduino-builder/libraries_loader.go:62 +0x3fc
github.com/arduino/arduino-cli/vendor/github.com/arduino/arduino-builder.(*ContainerSetupHardwareToolsLibsSketchAndProps).Run(0xc1248c, 0x11c4e1e0, 0xc1248c, 0x0)
        /home/jenkins/workspace/arduino-cli/src/github.com/arduino/arduino-cli/vendor/github.com/arduino/arduino-builder/container_setup.go:63 +0x323
github.com/arduino/arduino-cli/vendor/github.com/arduino/arduino-builder.runCommands(0x11c4e1e0, 0x11a99ba4, 0x22, 0x22, 0x1, 0x0, 0x0)
        /home/jenkins/workspace/arduino-cli/src/github.com/arduino/arduino-cli/vendor/github.com/arduino/arduino-builder/builder.go:191 +0xc1
github.com/arduino/arduino-cli/vendor/github.com/arduino/arduino-builder.(*Builder).Run(0x11a99cc8, 0x11c4e1e0, 0x97a960, 0x11c146b8)
        /home/jenkins/workspace/arduino-cli/src/github.com/arduino/arduino-cli/vendor/github.com/arduino/arduino-builder/builder.go:109 +0xb3a
github.com/arduino/arduino-cli/vendor/github.com/arduino/arduino-builder.RunBuilder(0x11c4e1e0, 0x0, 0x97a960)
        /home/jenkins/workspace/arduino-cli/src/github.com/arduino/arduino-cli/vendor/github.com/arduino/arduino-builder/builder.go:207 +0x29
github.com/arduino/arduino-cli/commands/compile.run(0x11ad7180, 0x11b317a0, 0x1, 0x3)
        /home/jenkins/workspace/arduino-cli/src/github.com/arduino/arduino-cli/commands/compile/compile.go:240 +0x116f
github.com/arduino/arduino-cli/vendor/github.com/spf13/cobra.(*Command).execute(0x11ad7180, 0x11b31760, 0x3, 0x4, 0x11ad7180, 0x11b31760)
        /home/jenkins/workspace/arduino-cli/src/github.com/arduino/arduino-cli/vendor/github.com/spf13/cobra/command.go:766 +0x20e
github.com/arduino/arduino-cli/vendor/github.com/spf13/cobra.(*Command).ExecuteC(0x11ad6a00, 0x11b4e140, 0x11ad7680, 0x11ad72c0)
        /home/jenkins/workspace/arduino-cli/src/github.com/arduino/arduino-cli/vendor/github.com/spf13/cobra/command.go:852 +0x28a
github.com/arduino/arduino-cli/vendor/github.com/spf13/cobra.(*Command).Execute(0x11ad6a00, 0x81f6d8, 0x82099c)
        /home/jenkins/workspace/arduino-cli/src/github.com/arduino/arduino-cli/vendor/github.com/spf13/cobra/command.go:800 +0x21
main.main()
        /home/jenkins/workspace/arduino-cli/src/github.com/arduino/arduino-cli/main.go:30 +0x1f

I also tried with custom boards installed with the boad manager. To try that I added the sanguino package index from here into arduino-cli.yaml, then updated the index with ./arduino-cli core update-index, then installed the sanguino boards with ./arduino-cli core install Sanguino:avr.
Once it was installed I ran ./arduino-cli compile --fqbn Sanguino:avr:sanguino BareMinimal/. This gave me the same error.

I hope it will help.

Renaud11232 picture Renaud11232 on 31 Mar 2019

I can confirm the same behavior, using multiple custom boards/cores, both with Marlin and the basic example.

I tracked down the source of the segfault but still trying to fully understand (and hopefully get a PR up, but fighting dep with forks and such).

To further complicate things -- a workaround is to install any arduino:{proc} core.
After running arduino-cli core install arduino:avr all the nils below are valid (visual inspection, have not tried flashing). So there's clearly something with silently erroring or not being checked around custom board directories.

The issue starts here:

github.com/arduino/arduino-builder.(*LibrariesLoader).Run(ctx *types.Context) error

The context passed is nil for ctx.ActualPlatform which ends up being used (in that function) here:

59:     actualPlatform := ctx.ActualPlatform
60:     platform := ctx.TargetPlatform
61:     if actualPlatform != platform {
62:         lm.AddPlatformReleaseLibrariesDir(actualPlatform, libraries.ReferencedPlatformBuiltIn)
63:     }

where the call to AddPlatformReleaseLibrariesDir uses the actualPlatform arg immediately, assuming non-nil:

func (sc *LibrariesManager) AddPlatformReleaseLibrariesDir(plaftormRelease *cores.PlatformRelease, location libraries.LibraryLocation) {
   138:     path := plaftormRelease.GetLibrariesDir()

which triggers the segfault (as platformRelease is nil).

zmarcantel picture zmarcantel on 18 Apr 2019
👀1 👍1

Some more tracking down makes it seem the Sanguino requires the arduino package to be installed -- which makes the above workaround make sense at least.

func (pm *PackageManager) ResolveFQBN(fqbn *cores.FQBN) (....)

// sanguino has "arduino:arduino" for "build.core"
184:        coreParts := strings.Split(buildProperties.Get("build.core"), ":")

...

// this is valid, and looks like the standard "arduino" package
192:            buildPlatform := buildPackage.Platforms[fqbn.PlatformArch]
193:            buildPlatformRelease = pm.GetInstalledPlatformRelease(buildPlatform)

... but then we try to get the installed packages:

func (pm *PackageManager) GetInstalledPlatformRelease(platform *cores.Platform) *cores.PlatformRelease {
322:        releases := platform.GetAllInstalled()
323:        if len(releases) == 0 {
324:            return nil
325:        }

(dlv) p releases
[]*github.com/arduino/arduino-cli/arduino/cores.PlatformRelease len: 0, cap: 0, []

which bubbles all the way out to LibraryLoaders context not having an ActualPlatform set.

zmarcantel picture zmarcantel on 18 Apr 2019

I can confirm that I'm getting the same problem trying to work with Adafruit boards on a clean install. As @zmarcantel suggested, running arduino-cli core install arduino:avr fixed it. This definitely needs a better error message at the very least though

QuinnFreedman picture QuinnFreedman on 24 Aug 2019

I wasn't able to track the exact commits but this is fixed now:

禄 ./arduino-cli compile --fqbn anet:avr:anet Marlin/
Error during build: platform not installed
masci picture masci on 1 Oct 2019

Hello, is the fix for this issue included in 0.6.0 ?

Because I tried the same thing I decribed above and got this : 

PS C:\Users\gaspa\Downloads> .\arduino-cli-0.6.0.exe version
arduino-cli-0.6.0.exe Version: 0.6.0 Commit: 3a08b07
PS C:\Users\gaspa\Downloads> .\arduino-cli-0.6.0.exe compile --fqbn anet:avr:anet .\BareMinimum\
panic: runtime error: invalid memory address or nil pointer dereference
[signal 0xc0000005 code=0x0 addr=0x68 pc=0x7ef175]

goroutine 1 [running]:
github.com/arduino/arduino-cli/arduino/cores.(*PlatformRelease).GetLibrariesDir(0x0, 0x2030000)
        /__w/arduino-cli/arduino-cli/arduino/cores/cores.go:224 +0x45
github.com/arduino/arduino-cli/arduino/libraries/librariesmanager.(*LibrariesManager).AddPlatformReleaseLibrariesDir(0xc000e4e400, 0x0, 0x2)
        /__w/arduino-cli/arduino-cli/arduino/libraries/librariesmanager/librariesmanager.go:143 +0x4a
github.com/arduino/arduino-cli/legacy/builder.(*LibrariesLoader).Run(0x1262df8, 0xc000070a80, 0x1262df8, 0x0)
        /__w/arduino-cli/arduino-cli/legacy/builder/libraries_loader.go:62 +0x45d
github.com/arduino/arduino-cli/legacy/builder.(*ContainerSetupHardwareToolsLibsSketchAndProps).Run(0x1262df8, 0xc000070a80, 0x1262df8, 0x40c91f)
        /__w/arduino-cli/arduino-cli/legacy/builder/container_setup.go:60 +0x217
github.com/arduino/arduino-cli/legacy/builder.runCommands(0xc000070a80, 0xc000095408, 0x20, 0x20, 0x1, 0x0, 0xc0000953e8)
        /__w/arduino-cli/arduino-cli/legacy/builder/builder.go:209 +0xe6
github.com/arduino/arduino-cli/legacy/builder.(*Builder).Run(0xc000095660, 0xc000070a80, 0xd574c0, 0xc00145e2a0)
        /__w/arduino-cli/arduino-cli/legacy/builder/builder.go:116 +0xba2
github.com/arduino/arduino-cli/legacy/builder.RunBuilder(...)
        /__w/arduino-cli/arduino-cli/legacy/builder/builder.go:225
github.com/arduino/arduino-cli/commands/compile.Compile(0xd52360, 0xc00002a120, 0xc000095ca8, 0xd419e0, 0xc000006018, 0xd419e0, 0xc000006020, 0xc00016c630, 0xc0000a1c00, 0x9df0c2, ...)
        /__w/arduino-cli/arduino-cli/commands/compile/compile.go:172 +0x1172
github.com/arduino/arduino-cli/cli/compile.run(0xc00019aa00, 0xc000181650, 0x1, 0x3)
        /__w/arduino-cli/arduino-cli/cli/compile/compile.go:96 +0x285
github.com/spf13/cobra.(*Command).execute(0xc00019aa00, 0xc0001815c0, 0x3, 0x3, 0xc00019aa00, 0xc0001815c0)
        /github/home/go/pkg/mod/github.com/spf13/[email protected]/command.go:830 +0x2b1
github.com/spf13/cobra.(*Command).ExecuteC(0x123ab60, 0x0, 0xb126e0, 0xc000076058)
        /github/home/go/pkg/mod/github.com/spf13/[email protected]/command.go:914 +0x302
github.com/spf13/cobra.(*Command).Execute(...)
        /github/home/go/pkg/mod/github.com/spf13/[email protected]/command.go:864
main.main()
        /__w/arduino-cli/arduino-cli/main.go:28 +0x34

And as mentioned earlier, installing arduino:avr prevents it from crashing : 

PS C:\Users\gaspa\Downloads> .\arduino-cli-0.6.0.exe core install arduino:avr
Downloading packages...
arduino:[email protected] already downloaded
arduino:[email protected] already downloaded
arduino:[email protected] already downloaded
arduino:[email protected] already downloaded
Installing arduino:[email protected]...
arduino:[email protected] installed
Installing arduino:[email protected]...
arduino:[email protected] installed
Installing arduino:[email protected]...
arduino:[email protected] installed
Installing arduino:[email protected]...
arduino:[email protected] installed
PS C:\Users\gaspa\Downloads> .\arduino-cli-0.6.0.exe compile --fqbn anet:avr:anet .\BareMinimum\
Sketch uses 510 bytes (0%) of program storage space. Maximum is 126976 bytes.
Global variables use 9 bytes of dynamic memory.
Renaud11232 picture Renaud11232 on 14 Nov 2019

Thanks @Renaud11232 we must have a regression because the same command from my previous comment now crashes, reopening

masci picture masci on 14 Nov 2019

Same issue here.

Bug Report

Current behavior

Commands (after running install.sh from 2019-11-19):

arduino-cli core update-index --additional-urls https://tician.github.io/arbotix/package_trossen_arbotix_index.json
cd /tmp && arduino-cli sketch new MyFirstSketch
arduino-cli -v compile --fqbn arbotix:avr:arbotixAd MyFirstSketch

Result:

Using board 'arbotixAd' from platform in folder: /home/gael/Arduino/hardware/arbotix/avr
panic: runtime error: invalid memory address or nil pointer dereference
[signal SIGSEGV: segmentation violation code=0x1 addr=0x68 pc=0xa61c6c]

goroutine 1 [running]:
github.com/arduino/arduino-cli/legacy/builder.(*TargetBoardResolver).Run(0x126c780, 0xc001ea2380, 0x126c780, 0x0)
    /__w/arduino-cli/arduino-cli/legacy/builder/target_board_resolver.go:61 +0x47c
github.com/arduino/arduino-cli/legacy/builder.(*ContainerSetupHardwareToolsLibsSketchAndProps).Run(0x126c780, 0xc001ea2380, 0x126c780, 0x40c618)
    /__w/arduino-cli/arduino-cli/legacy/builder/container_setup.go:60 +0x210
github.com/arduino/arduino-cli/legacy/builder.runCommands(0xc001ea2380, 0xc0015d3408, 0x20, 0x20, 0x2aaaaaa01, 0x22, 0x28)
    /__w/arduino-cli/arduino-cli/legacy/builder/builder.go:209 +0xdf
github.com/arduino/arduino-cli/legacy/builder.(*Builder).Run(0xc0015d3660, 0xc001ea2380, 0xd53280, 0xc0014e30a0)
    /__w/arduino-cli/arduino-cli/legacy/builder/builder.go:116 +0xb9b
github.com/arduino/arduino-cli/legacy/builder.RunBuilder(...)
    /__w/arduino-cli/arduino-cli/legacy/builder/builder.go:225
github.com/arduino/arduino-cli/commands/compile.Compile(0xd4e300, 0xc000038148, 0xc0015d3ca8, 0xd3da40, 0xc00000e018, 0xd3da40, 0xc00000e020, 0xc00017a6c0, 0xc0001a9c00, 0x9e0dcb, ...)
    /__w/arduino-cli/arduino-cli/commands/compile/compile.go:172 +0x116b
github.com/arduino/arduino-cli/cli/compile.run(0xc0001aa500, 0xc000193300, 0x1, 0x4)
    /__w/arduino-cli/arduino-cli/cli/compile/compile.go:96 +0x27e
github.com/spf13/cobra.(*Command).execute(0xc0001aa500, 0xc000193280, 0x4, 0x4, 0xc0001aa500, 0xc000193280)
    /github/home/go/pkg/mod/github.com/spf13/[email protected]/command.go:830 +0x2aa
github.com/spf13/cobra.(*Command).ExecuteC(0x1242ec0, 0x0, 0xb08e00, 0xc00003c0b8)
    /github/home/go/pkg/mod/github.com/spf13/[email protected]/command.go:914 +0x2fb
github.com/spf13/cobra.(*Command).Execute(...)
    /github/home/go/pkg/mod/github.com/spf13/[email protected]/command.go:864
main.main()
    /__w/arduino-cli/arduino-cli/main.go:28 +0x2d

Expected behavior

This should compile.

Environment

  • CLI version (output of arduino-cli version): arduino-cli Version: 0.6.0 Commit: 3a08b07
  • OS and platform: Ubuntu 18.04, 64bit

Additional context

galou picture galou on 20 Nov 2019
Was this page helpful?
0 / 5 - 0 ratings

Related issues

TomasHubelbauer picture TomasHubelbauer  路  9Comments
toogooda picture toogooda  路  3Comments
d-a-v picture d-a-v  路  8Comments
ArminJo picture ArminJo  路  5Comments
endorama picture endorama  路  8Comments